ProScan DC Linear Servo Stage Technology www.prior.com
Stretching the Boundaries of Performance... Ultra Quiet Operation Can you hear that? Neither can we! Even at high speeds (up to 300 mm/sec) the linear DC servo motors are almost silent. The Highest Precision With an impressive 0.15 micron repeatability and 50 nanometer linear scales, the HLD117 is the best microscope stage on the market today. Low Profile Design The low profile flat top design allows ample room to access microscope adjustments. Smooth Motion The linear motors enable smooth, steady, controllable acceleration and travel provide the ultimate in stability for the sample. The movement is so smooth that images can be shot on the fly. Programmable speeds down to 1um/second with the triggering ability of the ProScan controller enable picture perfect synchronization for imaging applications. High Speed Prior has the speed you need! The HLD117 Linear Motor stages achieve the highest stage speeds and accelerations. A maximum programmable stage speed of 300mm/sec and very rapid accelerations bring your research to new levels. PRECISION IN MOTION
Superior Versatility Slide Scanning Built for performance with unmatched acceleration rates and speeds, the HLD117 is the best choice for either start/stop point to point imaging or for continuous motion and velocity controlled scanning applications. The ProScan controller with TTL I/O and triggering functions provides constant speed movements with extremely low velocity ripple for picture perfect synchronization between automation and imaging software. Multipoint Imaging Whether your cells are fixed or in solution Prior linear drive stages make multiple position imaging a breeze. Image acquisition from multiple points scattered across a wide area is faster than previously thought possible. Scanning a 96 well plate in about 15 seconds? It s here. Want more data? Add Prior s Nanopositioning Piezo Z stage and collect three dimensional data at each position in milliseconds! High Content Screening Combine the fastest most precise stage ever made by Prior, solid state LED light sources, PLW20 Well Plate Loader, ProScan TTL triggering, your microscope and imaging software and you have the resolution, automation and speed, speed, speed needed for the acquisition of high content screening multi-parametric data. Software Integration Integration into existing imaging software could not be easier. The HLD117 linear motor stages from Prior Scientific respond to the same command set as previous Prior stages allowing them to work with existing applications with little or no required software modifications. For those starting from scratch, a comprehensive Software Development Kit is provided that makes integration with 3rd party software packages very straightforward. The most powerful and most flexible positioning systems for microscopy applications awaits your integration. We welcome the opportunity to work with you! Contact Us for Custom and OEM Configurations!
Compatible Accessories High Speed Filter Wheel and Shutters The high speed filter wheel system delivers smooth operation and changes filter positions in as little as 55ms. Focus Options Stepper Z stages, Piezo Z stages and rotary stepper focus drives are available from Prior. LED and Metal Halide Illumination Systems Prior offers a range of LED illumination for brightfield and fluorescence microscopy applications along with a selection of metal halide lamp illumination systems. Well Plate Loading Systems Prior s PLW20 Well Plate Loading System is compatible with the ProScan system and with most major inverted microscopes. The PLW20 features a 20 well plate capacity in stainless steel racks for easy cleaning. Compatible with covered and uncovered well plates, the system fits all standard microtitre plates up to 19mm thick. Branded, Special and OEM Systems Prior Scientific controls the design and manufacturing process for all of our automated microscope products. From branded products to entirely unique solutions, Prior has the tools to provide for your needs. From concept to finished product - Prior is the OEM solution you have been searching for! Worldwide distribution Prior Scientific Ltd Cambridge, UK Prior Scientific Inc Rockland, MA. USA Prior Scientific GmbH Jena, Germany Prior Scientific KK Tokyo, Japan T. +44 (0) 1223 881711 E. uksales@prior.com T. +1 781-878-8442 E. info@prior.com T. +49 (0) 3641 675 650 E. jena@prior.com T. +81-3-5652-8831 E. info-japan@prior.com www.prior.com
HLD117 Linear Motor Stage Series High Precision Stages with Linear Motor Technology for Leica DM, Nikon Ti and Olympus IX Microscopes Version: 02132014
HLD117DM High Precision Stage with Linear Motor Technology for Leica DMI Microscopes Prior s newest stage technology, the HLD117DM stage with Linear Motor Technology brings a new level to precision in microscope automation. Integrated 50 nanometer encoders standard Travel 120mm x 72mm Flat top design Features of the HLD117DM include: Superior repeatability - 0.15µm* Faster scanning speeds up to 300mm/sec Low profile Ultra quiet operation Super smooth movements Flat top design Integrated 50 nanometer encoders standard Compatible with Prior NanoScan Piezo Z stages Fixed stage cable eliminates cable drag improving performance Integrates/compatible with most imaging software Range of standard sample holders General Specifications Travel range: 120 mm x 72 mm XY repeatability: 0.15μm* Minimum step size (resolution): 0.05μm Metric accuracy (per mm of travel): 0.045μm** Minimum velocity: 1 micron/second Maximum velocity: 300 mm/second Squareness: 20 arc/second** Motors: high precision linear DC servo Linear slides: precision 3mm crossed roller way Limit switches: X and Y standard Stage profile: approximately 32.5 mm Weight: approximately 7 kg Maximum load capacity: 6 kg *Mean value **Based on performance with IST enabled and measured over full travel of the stage.
HLD117DM Stage High Precision Stage with Linear Motor Technology for Leica DMI Microscopes HLD117DM Stage With Linear Stage Technology Ordering Information Part Number DMLDXY HLD31XYZ HLD117DM PS3J100 Description ProScan linear motor XY stage kit including ProScan III LD controller, HLD117DM linear stage, PS3J100 joystick and H473XR universal specimen holder for slides/petri dishes ProScan III LD linear motor controller Prior linear motor stage for Leica DMI microscope ProScan III Joystick Worldwide distribution Prior Scientific, Ltd Cambridge, UK Prior Scientific, Inc Rockland, MA. USA Prior Scientific, GmbH Jena, Germany Prior Scientific KK Tokyo, Japan T. +44 (0) 1223 881711 E. uksales@prior.com T. +1 781-878-8442 E. info@prior.com T. +49 (0) 3641 675 650 E. jena@prior.com T. +81-3-5652-8831 E. info-japan@prior.com
HLD117NN High Precision Stage with Linear Motor Technology for Nikon Ti Microscopes Prior s newest stage technology, the HLD117NN stage with Linear Motor Technology brings a new level to precision in microscope automation. Sample holder area of 238mm x157mm Travel 120mm x 80mm Integrated 50 nanometer encoders standard Features of the HLD117NN include: Superior repeatability - 0.15µm* Faster scanning speeds up to 300mm/sec Low profile Ultra quiet operation Super smooth movements Integrates seamlessly with Nikon Elements Adapter plate available for Prior s range of sample holders Flat top design Integrated 50 nanometer encoders standard Sample holder area of 238mm x 157mm (Nikon standard) Compatible with Prior NanoScan Piezo Z stages Fixed stage cable eliminates cable drag improving performance Compatible with Prior PLW20 Well Plate Loader General Specifications Travel range: 120mm x 80mm XY repeatability: 0.15μm* Minimum step size (resolution): 0.05μm Metric accuracy (per mm of travel): 0.045μm** Minimum velocity: 1 micron/second Maximum velocity: 300 mm/second Squareness: 20 arc/second** Motors: high precision linear DC servo Linear slides: precision 3mm crossed roller way Limit switches: X and Y standard Stage profile: approximately 45.35mm Weight: approximately 7 kg Maximum load capacity: 6 kg * Mean value ** Based on performance with IST enabled and measured over full travel of the stage.
HLD117NN Stage High Precision Stage with Linear Motor Technology for Nikon Ti Microscopes HLD117NN Stage With Linear Stage Technology Ordering Information Part Number TILDXY HLD31XYZ HLD117NN PS3JNIK HLW223XR HLD324 Description ProScan linear motor XY stage kit including ProScan III LD controller, HLD117NN linear stage, PS3JNIK joystick and H473XR universal slide/petri holder ProScan III LD linear motor controller Prior linear motor stage for Nikon Ti microscope OEM ProScan III Joystick for Nikon Insert to adapt HLD117NN to HLW20N well plate loader Adapter for standard Prior sample holder Worldwide distribution Prior Scientific, Ltd Cambridge, UK Prior Scientific, Inc Rockland, MA. USA Prior Scientific, GmbH Jena, Germany Prior Scientific KK Tokyo, Japan T. +44 (0) 1223 881711 E. uksales@prior.com T. +1 781-878-8442 E. info@prior.com T. +49 (0) 3641 675 650 E. jena@prior.com T. +81-3-5652-8831 E. info-japan@prior.com
HLD117IX High Precision Stage with Linear Motor Technology for Olympus IX3 Microscopes Prior s newest stage technology, the HLD117IX stage with Linear Motor Technology brings a new level to precision in microscope automation. Integrated 50 nanometer encoders standard Travel 120mm x 80mm Superior repeatability Features of the HLD117IX include: Superior repeatability - 0.15µm* Faster scanning speeds up to 300mm/sec Low profile Ultra quiet operation Super smooth movements Integrates with cellsens software Range of standard sample holders* Flat top design Integrated 50 nanometer encoders standard Compatible with Prior NanoScan Piezo Z stages Fixed stage cable eliminates cable drag improving performance *For a complete list of Prior sample holders please see the Prior Scientific price list. General Specifications Travel range: 120mm x 80mm XY repeatability: 0.15μm* Minimum step size (resolution): 0.05 μm Metric accuracy (per mm of travel): 0.045 μm** Minimum velocity: 1 micron/second Maximum velocity: 300 mm/second Squareness: 20 arc/second** Motors: high precision linear DC servo Linear slides: precision 3mm crossed roller way Limit switches: X and Y standard Stage profile: approximately 41mm Weight: approximately 7 kg Maximum load capacity: 6 kg *Mean value **Based on performance with IST enabled and measured over full travel of the stage.
HLD117IX Stage High Precision Stage with Linear Motor Technology for Olympus IX3 Microscopes HLD117IX Stage With Linear Stage Technology Ordering Information Part Number IX3LDXY HLD31XYZ HLD117IX PS3J100 Description ProScan linear motor XY stage kit including ProScan III LD controller, HLD117IX linear stage, PS3J100 joystick and H473XR universal specimen holder for slide/petri dishes ProScan III LD linear motor controller Prior linear motor stage for Olympus IX3 microscope Interactive Control Center Joystick Worldwide distribution Prior Scientific, Ltd Cambridge, UK Prior Scientific, Inc Rockland, MA. USA Prior Scientific, GmbH Jena, Germany Prior Scientific KK Tokyo, Japan T. +44 (0) 1223 881711 E. uksales@prior.com T. +1 781-878-8442 E. info@prior.com T. +49 (0) 3641 675 650 E. jena@prior.com T. +81-3-5652-8831 E. info-japan@prior.com