THE HILTON SERIES Vertical Burn Performance, Flat or Contoured Lenses Available in 3 Sizes: 100 Up to 1000 Watts
Small Small Small Pole-Mount Small Pole-Mount MEETS IESNA FULL CUTOFF CLASSIFICATION IESNA FULL CUTOFF GUIDELINES A light fixture with a light distribution where no candela (light) occurs at or above an angle of 90 above nadir. Additionally, the candela per 1000 lamp lumens does not numerically exceed 100 (10%) at a vertical angle 80 above nadir. This applies to all lateral angles around the luminaire. Pole-Mount Hilton Large Community-friendly lighting is intended to eliminate unnecessary uplight, minimize light trespass, glare and wasted energy, and still provide quality lighting as required in today's society. Hilton Large Pole-Mount
THE HILTON FLAT LENS WHEN FULL CUTOFF IS REQUIRED THE EVOLUTION OF LIGHT CONTINUES REFLECTOR OPTIONS The Hilton Series offers a wide variety of flat lens reflector systems to meet your needs, including these high-performance choices: HILTON LARGE PERIMETER FORWARD THROW 90 80 90 80 HILTON LARGE TYPE 5 0 (NADIR) Today s stricter zoning requirements for control of light pollution require outdoor fixtures that can reduce light spill. The Hilton Flat Lens Series features the benefits of traditional Vertical Burn Technology combined with the cutoff advantages of a flat lens to form a high performance hybrid fixture based upon the latest improvements in lamp and reflector technologies. A vertically oriented lamp is completely surrounded by the reflector system to control the lamp output, produce sharp cutoff and optimize light distribution. The lamp s arc tube is perpendicular to the lens, minimizing arc image and maximizing the distance from the lens surface. 30 Better Uniformity than Horizontal Burn Comparison based on the HFSV-5-320-F Luminaire. As a result, perceived glare is reduced. The vertical burn luminaires equal the cutoff and glare control properties of horizontal burn fixture technology while matching maximum performance of vertical burn fixtures listed as IESNA (Illuminating Engineering Society of North America) semi-cutoff. The Hilton Flat Lens is the perfect solution for meeting IESNA s requirements for acceptable full cutoff classification and uniformity ratios. Enjoy naturally uniform illumination for increased safety, savings and see-ability, with the Hilton Flat Lens. TYPE 5 SMALL TYPE 3 FULL LINE OF FLAT LENS VERTICAL BURN FIXTURES Large Up To 1000 W Up To 400 W Small Up To 320 W HFL 29 15-1/8 HFPL 29 15-1/8 24-1/4 HFR 26 14 HFPR 26 14 24-1/4 HFRD 26 17-1/2 HFPRD Pole-Mount 26 17-1/2 27-5/8 HFSV/HFSH 20 11-3/8 HFPSV/HFPSH 20 11-3/8 18-5/8 HFSDV/HFSDH 20 14 HFPSDV/HFPSDH 20 14 21-1/4
Large
THE HILTON CONTOURED LENS WHEN WIDE COVERAGE IS PREFERRED The Hilton Contoured Lens is ideal for site designs which call for lighting large spaces using higher poles. Like the Hilton Flat Lens, the Hilton Contoured Lens features a reflector system which totally surrounds a vertically oriented lamp. This maximizes light distribution and uniformity. Providing broader lighting coverage from every fixture in an even, uniform distribution pattern, the Hilton Contoured Lens brings you increased visibility and security. With the Hilton Contoured Lens, fewer poles and fixtures can be used to improve cost efficiency. REFLECTOR OPTIONS The Hilton Series offers a wide variety of contoured lens reflector systems to meet your needs, including these high-performance choices: HILTON LARGE FORWARD RAMP TYPE 5 AUTOMOTIVE FORWARD THROW DIMENSIONS Large HIL (Large) 29 18 HR 26 17-7/8 HRP 26 17-7/8 24-1/4 HRD 26 21-1/4 HRPD 26 21-1/4 27-5/8
THE HILTON SERIES DISTINCTIVE STYLING. TRUE FLEXIBILITY. LSI has expanded its line of high-performance, Vertical Burn Hilton fixtures to offer you more choices than ever before. As the latest addition to the Hilton family, a flat lens fixture is now available to meet the growing demands of stricter zoning requirements. The Hilton Flat Lens offers lighting uniformity and efficiency, in addition to full cutoff as defined by the IESNA (Illuminating Engineering Society of North America). TOP-ACCESS ( AND SMALL ONLY) The and Small Top-Access disc or dome cover offers easy access with no loose hardware. Three stainless steel, captive fasteners seal the top cover to the housing to keep out insects, dust and moisture. DOME TOP Also, part of the expanded Hilton family is the and the Small. With the and Small, LSI has packaged the distinctive styling and unbeatable performance of the original Hilton in a smaller, more compact, more architecturally appealing fixture. The and Small provide the same range of choices you ve come to expect from this sophisticated line of outdoor fixtures, while providing lower EPAs. Designed to enhance today s architectural styles, the Hilton Series soft, rounded lines will complement the curves of any building. DISC TOP ARM MOUNTING A one-piece, extruded arm with internal bolt tracks offers easy mounting. Arm is compatible with all fixture mounting configurations. In addition, a variety of choices are available with the expanded Hilton Series to help you meet your lighting needs perfectly: Three Housing Sizes Arm or Mounting Nine High-Performance Reflector Systems Flat and Contoured Lens Configurations Assortment of Finishes and Color Decals POLE-TOP MOUNTING The cast aluminum mounting hub conceals the wiring compartment and mounts directly to LSI s unique pole-top mounting plate via a high-strength, grade five steel bolt with nylon insert and split-lock washer for double locking. The fixture is pre-wired for ease of installation. Support arms consist of four 11/16 O.D. aluminum rods.
HOUSING HILTON LARGE: The Hilton Large features a one-piece, spun aluminum housing with a cast aluminum door. Four stainless steel, captive door fasteners provide secure closure and allow for easy bottom access with no loose hardware. : Designed around a 1000 Watt Metal Halide Reduced Envelope lamp, the s smaller, more compact housing results in reduced windloads for lower EPAs. Existing poles can be used for retrofitting, while lighter-gauge, less expensive poles can be used for new construction. SMALL: Available up to 320 watts, the Small s smaller, more compact housing (only 20 in diameter) results in reduced windloads for lower EPAs. Available in dome and disc top styles. LIGHT SOURCES Clear lamps are supplied as standard. Pulse-Start Metal Halide, Super Metal Halide, Metal Halide, Metal Halide Reduced Envelope and High Pressure Sodium lamps are available to meet your lighting needs. (See Ordering Chart for available lamp/housing combinations) REFLECTORS/DISTRIBUTION PATTERNS Nine high-performance, high-tech reflector systems are available. The and Hilton Large reflectors are field rotatable for flexible, uniform light distribution. Choose from Type II, Type III, Type FA, Type FP, Type FT, Type FR, Type V, and ART (Advanced Reflector Technology) Type AFT and Type AI. (See Ordering Chart for available reflector/lens combinations) LENSES The Hilton Series offers flat lenses for sharp cutoff lighting, and contoured lenses when broad lighting coverage is preferred. All flat and contoured lenses are sealed to the cast aluminum lens frame (Large) or into the bottom of the top-access housing ( and Small) with continuous EDPM gasketing to prevent entry of insects, dust and moisture. FINISH COLORS & ACCENT STRIPING Each Hilton fixture is finished with DuraGrip, LSI s baked-on, polyester-powder coat finishing process. LSI s DuraGrip finish withstands weather changes without cracking or peeling, and is guaranteed for 5 full years. FINISH COLORS BUFF BLACK ACCENT STRIPING WHITE DARK RED BLACK TOMATO RED VERTICAL BURN Total Uniformity for Safety, Savings and See-Ability Vertical Burn lighting creates increased visibility through uniform lighting performance, reduced hot spots and reduced pockets of darkness. This uniform see-ability heightens your customers and employees sense of security. Reflector completely surrounds vertically positioned lamp to control light output and maximize light distribution Maximum light coverage and uniformity prevent glaring hot spots Fewer fixtures burn up to 30% less energy annually Maximum lamp life lowers long-term maintenance costs Fewer poles and fixtures lower overall costs FLAT LENS VERTICAL BURN CONTOURED LENS VERTICAL BURN PULSE-START METAL HALIDE For High Performance and Efficiency Pulse-Start Metal Halide delivers the white light of Metal Halide along with the energy efficiency and lumen maintenance of High Pressure Sodium. Available in 175, 200, 250, 320, 400, 750 and 1000 Watt versions Longer lamp life (up to 30,000 hours) More lumens per watt Better lumen maintenance with more light output over time Improved color stability with less color shift Faster warm-up Quicker restrike BRONZE PLATINUM PLUS GRAPHITE WHITE SATIN VERDE GREEN METALLIC SILVER DARK GREEN LIGHT GOLD METALLIC CHARCOAL METALLIC BLUE METALLIC AZTEC SILVER METALLIC GENERAL COMPARISON OF STANDARD METAL HALIDE, HIGH PRESSURE SODIUM (H.P.S.) AND PULSE-START METAL HALIDE TECHNOLOGY * Standard Pulse-Start Feature M.H. Metal Halide H.P.S. Color White Whiter Yellow Efficiency (L/W) 60-85 90-110 100-125 Lumen Maint. 65% 80% 90% Lamps 175-1000 35-1000 35-1000 Lamp Life (khrs) 6-16 10-30 24+ *Reprinted with permission from Advance Transformer Co.
HILTON ORDERING INFORMATION (Select appropriate choice from each column to formulate order code. Refer to example below.) Luminaire Prefix Vertical Burn Disc Top HR Arm Mount HRP Pole Top 1 Dome Top HRD Arm Mount HRPD Pole Top 1 Hilton Large Horizontal Burn HIL Large Arm Mount Distribution Hilton Flat Lens Series Small Horizontal Disc Top HFSH - Arm Mount HFPSH - Pole Top 1 Dome Top HFSDH - Arm Mount HFPSDH - Pole Top 1 Small Vertical Disc Top HFSV - Arm Mount HFPSV - Pole Top 1 Dome Top HFSDV - Arm Mount HFPSDV - Pole Top 1 Vertical Disc Top HFR - Arm Mount HFPR - Pole Top 1 Dome Top HFRD - Arm Mount HFPRD - Pole Top 1 Hilton Large Vertical HFL - Arm Mount HFPL - Pole Top 1 3 Type III FT Forward Throw 5 Type V Square 2 Type II 3 Type III FP Perimeter Forward Throw 5 Type V Round 3 Type III FP Perimeter Forward Throw 5 Type V Round 3 Type III FP Perimeter Forward Throw FA Automotive Forward Throw 5 Type V Square 2-Type II 3-Type III 5 - Type V FP- Forward Throw Perimeter FA-Automotive Foward Throw Advanced Reflector Technology Optical Systems: AFT-Automotive Foward Throw AI-Automotive Interior FR Forward Ramp Lamp Wattage 100 150 175 250 320 100 150 175 200 250 320 200 250 320 400 750 1000 Hilton Contoured Lens Series 250 320 400 750 1000 750 1000 1000 Light Source PSMH-Pulse-Start Metal Halide 320 Watt MH - Metal Halide 175, 250 Watt 100, 150, 250 Watt PSMV-Pulse-Start Metal Halide 175, 200, 250, 320 Watt MH - Metal Halide 175, 250 Watt 100, 150 Watt PSMV-Pulse-Start Metal Halide 200, 250, 320, 400 Watt SMV-Super Metal Halide 400 Watt MH - Metal Halide 250, 400 Watt 250, 400 Watt PSMV Pulse-Start Metal Halide 750, 1000 2 Watt MHR Metal Halide Reduced 1000 Watt 750 3 Watt PSMV Pulse-Start Metal Halide 250, 320, 400, 750, 1000 2 Watt SMV Super Metal Halide 400 Watt MH - Metal Halide 250, 400 Watt MHR Metal Halide Reduced Envelope 1000 Watt 400, 750 3 Watt PSMV Pulse-Start Metal Halide 750, 1000 2 Watt MHR Metal Halide Reduced Envelope 1000 Watt MHR Metal Halide Reduced Envelope 1000 Watt Lens F Flat Clear Tempered Glass CT Contoured Clear Tempered Glass Line Voltage 480 MT Multi Tap TT Tri-Tap Consult Factory for International Voltages Luminaire Finish BRZ Bronze BLK Black PLP Platinum Plus BUF Buff WHT White SVG - Satin Verde Green GPT - Graphite MSV - Metallic Silver MT Multi Tap (120V, 208V, 240V, and 277V) is shipped standard unless otherwise specified, and is pre-wired for highest voltage. Alternate voltages will require field re-wiring. TT Tri-Tap (120V, 277V, and 347V) is shipped standard for Canadian applications, and is pre-wired for highest voltage. Alternate voltages will require field re-wiring. Options PCI120 Button Type Photocell PCI208 Button Type Photocell PCI240 Button Type Photocell PCI277 Button Type Photocell PCI347 Button-Type Photocell PCE120 External Photocell 4 PCE208 External Photocell 4 PCE240 External Photocell 4 PCE277 External Photocell 4 PCR Photoelectric Control Receptacle 5 Color Decals 45 Light Gold 20 Charcoal Metallic 55 Black 94 Blue Metallic 59 Dark Green 51 Dark Red 21 Tomato Red 50 White 700 Aztec Silver Metallic PCE120 External Photocell 4 PCE208 External Photocell 4 PCE240 External Photocell 4 PCE277 External Photocell 4 PCR Photoelectric Control Receptacle 5 TYPICAL ORDER EXAMPLE: HFL 5 1000 MHR F MT PLP PCR 20 FOOTNOTES: 1- When ordering pole top fixtures for tenon mounting, a pole top adaptor must be ordered. 2- Tri-Tap is not available in 1000W PSMV. Specify voltage required. 3- Multi Tap is not available in 750W HPS. Specify voltage required. 4- External photocell compatible with only. 5- PCR compatible with Hilton Large. PCR factory installed and pre-wired for highest voltage. Alternate voltages will require field re-wiring. Photocell must be ordered seperately - see Accessories Listed for wet locations. LUMINAIRE EPA CHART Includes Bracket. Mount Single D90 D180 T90 TN120 Q90 F C F C F C F C F C F C F C Hilton Large 2.0 1.9 2.0 3.4 3.5 3.7 3.9 5.2 5.5 5.3 5.5 6.8 7.1 Disc Top 1.8 2.0 1.9 1.9 3.3 3.3 3.7 3.7 5.2 5.2 5.2 5.2 6.7 6.7 Dome Top 2.0 2.2 2.1 2.1 3.6 3.6 4.1 4.1 5.7 5.7 5.7 5.7 7.4 7.4 Small Disc Top 1.1 1.1 1.8 2.1 2.9 2.9 3.7 Small Dome Top 1.3 1.2 2.2 2.5 3.4 3.4 4.4 F=Flat Lens C=Contoured Lens LSI LIGHTING SOLUTION PLUS 10000 Alliance Road Cincinnati, Ohio 45242 (513)793-3200 FAX (513)793-0147 www.lsi-industries.com 2003 LSI INDUSTRIES INC. 1/08 W2505