a Nexans company Catalogue 014
Nexans Network Solutions Div. Euromold COMPANY PRESENTATION EUROMOLD Euromold is the leading European specialised designer, manufacturer and distributor of prefabricated cable accessories for medium voltage energy distribution. Euromold provides a complete range of accessories for underground cables: premoulded EPDM rubber connectors for cables and epoxy bushings for transformers and switchgear, as well as a large range of coldshrinkable terminations and joints from 1 to 4 kv. Euromold is also the manufacturer of electrical components for the high voltage accessories of the Nexans group. ISO 9001 Certificate Since 199, Euromold s commitment to quality is demonstrated by its ISO 9001 certification. International standards All our products meet the International standards like CENELEC HD 69.1, CENELEC EN 50180, IEC 601, IEC 6050-4 or country specifications. Official certificates, CESI, KEMA, ATEX prove the conformity of our products. Long duration tests of existing or new products are continuously performed in our test fields. Laboratory accreditation Since June 000, Euromold s independent ELAB laboratory obtained the BELAC accreditation no.144-test conform with the European standards for laboratories ISO 105 for electrical testing of low and medium voltage cable accessories according to the international standards EN 509, IEC 6050-4, IEC 6144 and HD 69. While every care is taken to ensure that the information contained in this publication is correct, no legal responsibility can be accepted for any inaccuracy. Nexans Network Solutions N.V. - Div. Euromold reserves the right to alter or modify the characteristics of its products described in this catalogue as standards and technology evolve. 1
TERMINATIONS Table of contents ITK - indoor termination OTK - outdoor termination AIN - indoor termination AFN - outdoor termination T-ITK - -core indoor termination T-OTK - -core outdoor termination 15TS-NSS - universal bushing boot 04/014
AIN SLIP-ON INDOOR TERMINATION Application A kit of terminations for use indoors in controlled environmental conditions and subject to light condensation. Provides a simple and quick method of stress relieving on screened polymeric cables. Up to 4 kv 6/10 (1) kv 6.5/11 (1) kv 8./15 (1.5) kv 1/0 (4) kv 1./ (4) kv 18/0 (6) kv 0.8/6 (4) kv Design Indoor termination comprising: 1. Cable lug (not included in the standard kit).. High flexibility silicone rubber housing, allowing larger tolerances on cable insulation diameters, with integrated conductive rubber insert, providing stress relief.. Earthing lug (not included in the standard kit). 1 Specifications and standards Meets the requirements of CENELEC HD 69.1 and IEC 6050-4. Termination type Voltage Um (kv) min Conductor sizes (mm ) max AIN 10 AIN 0 AIN 0 AIN 6 1 4 6 4 5 5 50 06/014 8
Kit contents A kit always comprises termination housings, installation instructions, special lubricant, wiper, adhesive tape, field control mastic,... Cable lugs and earthing lugs are not included in the standard kit, but can be ordered separately. Ordering instructions Select the part number corresponding to both the system voltage and the cable dimensions in mm. Voltage Um (kv) 1 Conductor sizes (mm ) Diameter over core insulation min max min max 5 95 1. 1.0 10 40 19.0 8.5 00 500.0.0 800 4.0 9.0 50.0 58.0 Number of sheds L 5 Dia. D 4 60 68 Ordering part number x AIN 10-1 x AIN 10- x AIN 10- x AIN 0-4 x AIN 6-5 x AIN 6-6 4 5 95 00 0 40 500 800 18.0.5 1.0 4.0 9.0.5.0 41.0 50.0 58.0 5 5 5 5 4 56 68 68 x AIN 0-1 x AIN 0- x AIN 0- x AIN 0-4 x AIN 6-5 x AIN 6-6 6 50 95 40 0 40.5.0.0 9.0 9.0 8.0 4.0 50.0 58.0 6 6 6 00 00 00 4 4 81 x AIN 0-1 x AIN 0- x AIN 0- x AIN 6-5 x AIN 6-6 4 00 1.5 9.0 41.0 50.0 58.0 x AIN 6-4 x AIN 6-5 x AIN 6-6 Example: A set of indoor terminations for a 4 kv - 40 mm stranded aluminium cable with copper wire screen without cable lugs. The diameter over core insulation is 0.4 mm. Order a x AIN 0- termination kit. For use with copper wire screened cables. No earthing device is necessary. For use with copper tape screened cables. Order: -/MT. For use with three-core cables. Please contact our representative. For use with other cable types. Please contact our representative. Can be supplied with all common types of cable lugs. No heating or flame is required. 9
AFN SLIP-ON OUTDOOR TERMINATION Application A kit of terminations for use outdoors and exposed to prolonged sunshine and other weather conditions. To connect polymeric insulated cable to equipment and for the outdoor terminating on to overhead lines or bus bars. Up to 4 kv 6/10 (1) kv 6.5/11 (1) kv 8./15 (1.5) kv 1/0 (4) kv 1./ (4) kv 18/0 (6) kv 0.8/6 (4) kv Design Outdoor termination comprising: 1. Cable lug (not included in the standard kit).. Water sealing silicone sleeve.. Silicone housing with sheds and integrated conductive silicone rubber insert providing stress relief for the cable. 4. Water sealing mastic. 5. Earthing clamp. 6. Earthing lug (not included in the standard kit). 1 Specifications and standards Meets the requirements of CENELEC HD 69.1 and IEC 6050-4. 5 4 6 Termination type Voltage Um (kv) min Conductor sizes (mm ) max AFN 10 AFN 0 AFN 0 AFN 6 1 4 6 4 5 5 50 06/014 10
Kit contents A kit always comprises termination housings, water sealing sleeve, the installation instructions, special lubricant, wiper, earthing clamp, water sealing mastic, adhesive tape, field control mastic,... Cable lugs and earthing lugs are not included in the standard kit, but can be ordered separately. Ordering instructions Select the part number corresponding to both the system voltage and the cable dimensions in mm. Voltage Um (kv) 1 4 6 4 4 Conductor sizes (mm ) Diameter over core insulation min max min max 5 95 10 40 00 500 800 5 95 00 50 95 40 0 0 40 500 800 0 40 10 00 1. 19.0.0 4.0 9.0 1.0 8.5.0 50.0 58.0 18.0.5.5.0 1.0 41.0 4.0 9.0 50.0 58.0.5 9.0.0 8.0.0 4.0 9.0 50.0 58.0 8.0.0 1.5 41.0 9.0 50.0 58.0 L Number of sheds (max) 10 10 10 4 40 4 40 4 40 4 40 4 40 6 00 6 00 6 00 Creepage Dia. D Ordering distance part number 90 69 x AFN 10-1 96 65 x AFN 10-105 60 x AFN 10-118 46 x AFN 0-4 1 55 x AFN 6-5 1 55 x AFN 6-6 100 480 x AFN 0-1 11 499 x AFN 0-118 46 x AFN 0-118 46 x AFN 0-4 1 55 x AFN 6-5 1 55 x AFN 6-6 115 695 x AFN 0-1 115 694 x AFN 0-1 18 x AFN 0-1 55 x AFN 6-5 1 55 x AFN 6-6 1 55 x AFN 6-1 55 x AFN 6-4 1 55 x AFN 6-5 1 55 x AFN 6-6 For use in heavy polluted areas (terminations with an increased creepage length) 0 10 00 8.0 1.5 9.0.0 41.0 50.0 58.0 11 11 11 11 55 55 55 55 1 1 1 1 109 109 109 109 x AFNP 6- x AFNP 6-4 x AFNP 6-5 x AFNP 6-6 Example: A set of outdoor terminations for a 4 kv - 40 mm stranded aluminium cable with copper wire screen without cable lugs. The diameter over core insulation is 0.4 mm. Order a x AFN 0- termination kit. For use with copper wire screened cables. No earthing device is necessary. For use with copper tape screened cables. Order: -/MT. For use with three-core cables. Please contact our representative. For use with other cable types. Please contact our representative. Can be supplied with all common types of cable lugs. No heating or flame is required. 11
Additional catalogue information on power cable accessories is available by contacting us at the address below: Distributed by: a Nexans company Nexans Network Solutions N.V. - Div. Euromold Zuid III, Industrielaan 1, B-90 Erembodegem Tel.: + (0)5 85 0 11 sales.euromold@nexans.com www.euromold.be 06/014 Catalogue also available on CD-ROM, Website and Mobile Apps