High resolution cavity-enhanced absorption spectroscopy with a mode comb.

Similar documents
Introduction to CEAS techniques. D. Romanini Laboratoire Interdisciplinaire de Physique Université Grenoble 1/CNRS

taccor Optional features Overview Turn-key GHz femtosecond laser

Detecting Next to Nothing: Spectroscopy in Optical Cavities

B. Cavity-Enhanced Absorption Spectroscopy (CEAS)

Pound-Drever-Hall Locking of a Chip External Cavity Laser to a High-Finesse Cavity Using Vescent Photonics Lasers & Locking Electronics

A new picosecond Laser pulse generation method.

A continuous-wave optical parametric oscillator for mid infrared photoacoustic trace gas detection

A Narrow-Band Tunable Diode Laser System with Grating Feedback

APPLICATION NOTE Frequency Comb Research Advances Using Tunable Diode Lasers

Dr. Rüdiger Paschotta RP Photonics Consulting GmbH. Competence Area: Fiber Devices

arxiv: v1 [physics.optics] 31 Mar 2008

UNMATCHED OUTPUT POWER AND TUNING RANGE

Chemistry 524--"Hour Exam"--Keiderling Mar. 19, pm SES

Ph 77 ADVANCED PHYSICS LABORATORY ATOMIC AND OPTICAL PHYSICS

R. J. Jones College of Optical Sciences OPTI 511L Fall 2017

Solid-State Laser Engineering

Integrated disruptive components for 2µm fibre Lasers ISLA. 2 µm Sub-Picosecond Fiber Lasers

Testing with Femtosecond Pulses

Femtosecond pulse generation

DESIGN OF COMPACT PULSED 4 MIRROR LASER WIRE SYSTEM FOR QUICK MEASUREMENT OF ELECTRON BEAM PROFILE

Vertical External Cavity Surface Emitting Laser

Actively Stabilized Scanning Single-Frequency. Ti:Sa /Dye Ring Laser External Doubling Ring Ti:Sa /Dye Standing Wave Laser

Optical phase-coherent link between an optical atomic clock. and 1550 nm mode-locked lasers

Supplementary Materials for

Ultrafast instrumentation (No Alignment!)

THE TUNABLE LASER LIGHT SOURCE C-WAVE. HÜBNER Photonics Coherence Matters.

High Power and Energy Femtosecond Lasers

A transportable optical frequency comb based on a mode-locked fibre laser

771 Series LASER SPECTRUM ANALYZER. The Power of Precision in Spectral Analysis. It's Our Business to be Exact! bristol-inst.com

Single-frequency operation of a Cr:YAG laser from nm

G. Norris* & G. McConnell

Quantum-Well Semiconductor Saturable Absorber Mirror

Application of maximum length sequences to photoacoustic chemical analysis

High Average Power, High Repetition Rate Side-Pumped Nd:YVO 4 Slab Laser

Romania and High Power Lasers Towards Extreme Light Infrastructure in Romania

Theoretical Approach. Why do we need ultra short technology?? INTRODUCTION:

Analytical Spectroscopy Chemistry 620: Midterm Exam Key Date Assigned: April 15, Due April 22, 2010

Spectrometer using a tunable diode laser

Continuum White Light Generation. WhiteLase: High Power Ultrabroadband

Fast Raman Spectral Imaging Using Chirped Femtosecond Lasers

레이저의주파수안정화방법및그응용 박상언 ( 한국표준과학연구원, 길이시간센터 )

R. J. Jones Optical Sciences OPTI 511L Fall 2017

Fast Widely-Tunable CW Single Frequency 2-micron Laser

combustion diagnostics

Differential Phase Shift Spectroscopy in a Thallium Atomic Beam

A novel High Average Power High Brightness Soft X-ray Source using a Thin Disk Laser System for optimized Laser Produced Plasma Generation

Optical coherence tomography

Wavelength Control and Locking with Sub-MHz Precision

3550 Aberdeen Ave SE, Kirtland AFB, NM 87117, USA ABSTRACT 1. INTRODUCTION

COMPONENTS OF OPTICAL INSTRUMENTS. Chapter 7 UV, Visible and IR Instruments

COMPONENTS OF OPTICAL INSTRUMENTS. Topics

Introduction Fundamentals of laser Types of lasers Semiconductor lasers

Supplementary Materials for

Optical generation of frequency stable mm-wave radiation using diode laser pumped Nd:YAG lasers

Module 4 : Third order nonlinear optical processes. Lecture 24 : Kerr lens modelocking: An application of self focusing

Applications of Steady-state Multichannel Spectroscopy in the Visible and NIR Spectral Region

Optical phase-locked loop for coherent transmission over 500 km using heterodyne detection with fiber lasers

High brightness semiconductor lasers M.L. Osowski, W. Hu, R.M. Lammert, T. Liu, Y. Ma, S.W. Oh, C. Panja, P.T. Rudy, T. Stakelon and J.E.

Supplementary Information for

High-Power, Passively Q-switched Microlaser - Power Amplifier System

Femtosecond optical parametric oscillator frequency combs for high-resolution spectroscopy in the mid-infrared

Lecture 5: Introduction to Lasers

Lecture 08. Fundamentals of Lidar Remote Sensing (6)

A CW seeded femtosecond optical parametric amplifier

Biomedical Research 2017; Special Issue: ISSN X

DBR based passively mode-locked 1.5m semiconductor laser with 9 nm tuning range Moskalenko, V.; Williams, K.A.; Bente, E.A.J.M.

Mira OPO-X. Fully Automated IR/Visible OPO for femtosecond and picosecond Ti:Sapphire Lasers. Superior Reliability & Performance. Mira OPO-X Features:

PITZ Laser Systems. Light Amplification by Stimulated Emission of Radiation. Cavity. What is a Laser? General introduction: systems, layouts

Actively Stabilized Scanning Single Frequency. Ti:Sa /Dye Ring Laser

Laser Locking with Doppler-free Saturated Absorption Spectroscopy

Status on Pulsed Timing Distribution Systems and Implementations at DESY, FERMI and XFEL

TIME-PRESERVING MONOCHROMATORS FOR ULTRASHORT EXTREME-ULTRAVIOLET PULSES

Observation of Rb Two-Photon Absorption Directly Excited by an. Erbium-Fiber-Laser-Based Optical Frequency. Comb via Spectral Control

High power VCSEL array pumped Q-switched Nd:YAG lasers

Chapter 3 OPTICAL SOURCES AND DETECTORS

Single Frequency DPSS Lasers

Self-organizing laser diode cavities with photorefractive nonlinear crystals

APE Autocorrelator Product Family

How to build an Er:fiber femtosecond laser

Ring cavity tunable fiber laser with external transversely chirped Bragg grating

Femtosecond to millisecond transient absorption spectroscopy: two lasers one experiment

Single-photon excitation of morphology dependent resonance

Spider Pulse Characterization

Designing for Femtosecond Pulses

Practical Aspects of Raman Amplifier

1. INTRODUCTION 2. LASER ABSTRACT

SECOND HARMONIC GENERATION AND Q-SWITCHING

High-Power Femtosecond Lasers

Doppler-Free Spetroscopy of Rubidium

visibility values: 1) V1=0.5 2) V2=0.9 3) V3=0.99 b) In the three cases considered, what are the values of FSR (Free Spectral Range) and

pulsecheck The Modular Autocorrelator

Optical design of shining light through wall experiments

Observational Astronomy

High-frequency tuning of high-powered DFB MOPA system with diffraction limited power up to 1.5W

PICOSECOND AND FEMTOSECOND Ti:SAPPHIRE LASERS

CONTINUOUS-WAVE OPTICAL PARAMETRIC OSCILLATORS

Powerful Single-Frequency Laser System based on a Cu-laser pumped Dye Laser

LIGO II Photon Drive Conceptual Design

Directly Chirped Laser Source for Chirped Pulse Amplification

Optical Fibers p. 1 Basic Concepts p. 1 Step-Index Fibers p. 2 Graded-Index Fibers p. 4 Design and Fabrication p. 6 Silica Fibers p.

Transcription:

CRDS User meeting Cork University, sept-2006 High resolution cavity-enhanced absorption spectroscopy with a mode comb. T. Gherman, S. Kassi, J. C. Vial, N. Sadeghi, D. Romanini Laboratoire de Spectrométrie Physique, CNRS UMR5588, Univ. J. Fourier de Grenoble, St Martin d Hères, France

Research at LSP/Grenoble Spectroscopy molecules of amospheric interest (O 3, CH 4, CO 2 ) : ICLAS 0.6-1.1µm, CW- CRDS in the telecom range Alain Campargue, Samir Kassi (poster) Isotope effects (in NO 2 ) : LIF, CRDS on a supersonic jet Remy Jost Trace detection Near-mid IR : DFB diode lasers & OF-CEAS Blue spectral range ECDL diode + OF-CEAS Marc Chenevier Irene Courtillot (poster) New developments Mode-Comb CEAS : Detecting radicals in the UV? VECSEL lasers (~2.5µm)... Daniele Romanini

Introduction Several CRDS/CEAS schemes exist based on different light sources. Increasing interest for Broad Band coverage for several applications. Pulsed dye lasers, lamps, LEDs, and mode-locked femtosecond sources being tested. BB CEAS/CRDS: Need to do a compromise dispersion/luminosity: The more you disperse, the less light you have per spectral element, the longer you have to accumulate. Other problem is spectral quality and stability of the BB source: Dye lasers and lamps are not very good, contrary to LEDs and ML lasers. ML lasers have high beam quality (mode matching ), and adjustable spectrum (width & spectral range) by using nonlinear optics (fibers, etc)

Standard CEAS scheme with laser tuning LASER Sample gas detector Transmission laser frequency

Wavelength Multiplexed Spectroscopy Broad-band LASER modelocked Sample gas CCD array Transmission laser frequency

What is a mode-locked laser? Laser cavity ( very simplified! ) ( ) Gain + Non-linear (Kerr) Medium (Ti:Sa) Output coupler Laser at work ( ) Intracavity giant pulse self-sustained by Kerr lensing Output : periodic series of pulse replicas! http://www.mpq.mpg.de/~haensch/comb/research/combs.html

Spectrum of a mode-locked laser... coherent ensemble of single-frequency lasers Time domain : Periodic train of pulses δt Δt 1/δt Mode spacing 1/Δt Fourier T. => Spectrum of mode-locked laser in a real case (laser Ti:Sa) the spectrum has ~10 5 modes

Spectrum of a mode-locked laser... coherent ensemble of single-frequency lasers Time domain : Periodic train of pulses δt Δt 1/δt Mode spacing 1/Δt Fourier T. => Spectrum of mode-locked laser in a real case (laser Ti:Sa) the spectrum has ~10 5 modes

Spectrum of a mode-locked laser - A closer look - http://www.mpq.mpg.de/~haensch/comb/research/combs.html

ML-CEAS : Basic principle Cavity transmission spectrum Modelocked laser spectrum Output Spectrum = T cav x Input Spectrum The spectrum transmitted by the cavity depends on the overlap of the two combs of modes : by changing the cavity length, we observe comb beatings, with different periods When combs are in tune, the laser spectrum is efficiently transmitted without beatings => Magic point

Pulse stacking : The time-domain point of view Pulses overlap in phase with circulating intracavity pulse : buildup occurs and transmission is efficient! E. R. Crosson et al., REV. SCI. INSTRUM. 70 (1999) 4

An alternative point of view in the time domain Laser pulses fall in phase with the pulse circulating in the cavity, which gives a coherent buildup of the intracavity field. This is similar to the singlefrequency case (CW-CRDS) but the buildup is not a stationary wave ( )

Comparison with the case of a lonely pulse No coherent buildup, instead a decreasing sequence of output pulses is produced (ring-down...), with initial intensity < T 2 Cavity injection is much less effective... ( ) ( ) ( ) 1/T 1/T 2

CEAS with a Mode-Locked laser Millennia pump laser, 5W Ti:Sa 100fs, 80Mhz optical isolator L 1 Photodiode PinHole M 2 M 1 L 2 PZT Translation stage Spectrograph M 1,2 : high reflectors around 800 nm CCD

Beating between mode combs 3.0 1.5 0.0 4 2 0 1000 μm 500μm Transmitted spectra for different displacements of cavity length from the «magic point» ( smaller peaks are from transverse cavity modes ) 20 10 0 150 μm 2000 1000 0 848 849 850 851 852 853 854 855 Wavelength [nm] 00 μm

Cavity transmission ( while slowly tuning its length ) 0.15 0.10 150 μm 0.50 distance from 0.25 0.00 40 μm «magic point» 1.0 0.5 0.0 10 «magic point» 20 μm NOTE: When looking at these signals on a fast timescale, one can recover the pulse train again... 5 0 00 μm 0 1 2 3 4 Time [ms] Cavity length tuning by a PZT

Why we see more than one comb resonances? f=0 frequency Laser emission 1 2 3 1 3 2 fine cavity tuning by piezo These secondary resonances have different intensity: An effect of dispersion To obtain spectra in transmission, one may either modulate the cavity around a resonance, or use a locking scheme

ML-CEAS : A first demonstration laser spectrum Spectrum transmitted by cavity filled with air Spectrum transmitted by cavity filled with HCCH 857 858 859 860 861 862 nm Effective absorption length F x L /π 120 m Acquisition time ~ 10 ms ( cavity length was modulated ) T. Gherman and D. Romanini, Optics Express, 10, 1033 (2002).

Going to the UV Doubled YAG pump laser, 5W Ti:Sa 100fs, 80Mhz PM gas out gas in BBO L 1 HR M 2 M1 L 2 + - CCD PZT Spectrograph Translation stage BBO : doubling crystal HR : high reflector for cutting the red M 1,2 : high reflectors for 370-420 nm PM : photomultiplier

ML-CEAS : Application in the blue Empty cavity... Ti:Sa frequency doubled laser : Overtone transition of HCCH with 8 quanta of CH excitation (420 nm) Cavity Finesse ~ 3000 Intensity TRSMISSION (a.u.)...with acetylène Noise ~ 10 8 / cm Acquisition ~ 30 s, (using a basic frequency-locking scheme) Absorbance [10-7 /cm] 5 4 3 2 1 0...ratio & baseline correction 23760 23780 23800 23820 23840 23860 T. Gherman, S. Kassi, A. Campargue, D. Romanini Chem. Phys. Letters 383 (2004) 353

ML-CEAS : N 2 discharge

Band 0-0 of N 2 + (B 2 Σ u + -X 2 Σ g+ ) 20000 Discharge on Discharge off Intensity ( CCD counts ) 15000 10000 5000 Continuous discharge in 1 Torr N 2 Cavity: R=98%, L=920 cm, F~150 => L eq ~ 50 m Recording time on CCD ~ 10 s 0 1000 800 600 400 200 0 Pixel number

1.00 Band 0-0 of N 2 + (B 2 Σ u + -X 2 Σ g+ ) Transmittance 0.99 0.98 0.97 spin-doubling Resolution ~ 2E-3 nm ( 0.16 cm -1 ) Discharge CW 1 Torr N 2 Cavity: Finesse ~ 150 Exposure time ~ 10 s Simulation : 400 C, 1.6E15 ions/m 3 389.0 389.5 390.0 390.5 391.0 391.5 wavelength(nm) T. Gherman, E. Eslami, D. Romanini, J.-C. Vial, N. Sadeghi, J Phys D 37 (2004) 2408

Multiplex CEAS : ML-lasers versus Lamps (or LEDs) Both sources are sufficiently smooth spectrally ML laser emission is highly coherent : SPATIALLY (TEM00 mode) => Cavity mode-matching high cavity injection efficiency reproducible & accurate absorption measurements TEMPORALLY (mode comb) => Cavity comb-locking further gain in injection Lamps easily provide a larger emission spectrum : Low resolution due to low spectral density and low cavity injection, and to the limited number of spectral elements on a CCD Less expensive (except for electric consumption?)

ML-CEAS, conclusions & perspectives Robust, simple, multiplex technique Real-time, high sensitivity (2x10-9 /cm/hz 1/2 ) Quantitative (calibration of cavity finesse by ringdown) => UV (efficient femtosecond pulse frequency upconversion) Small sample volume Frequency locking of combs allows short acquisition times even with high finesse cavities Effects of cavity dispersion (e.g. from mirrors) can be circumvented on relatively large spectral ranges (~>10nm) by using a small cavity modulation