Magic Wand Portable Scanner with Auto-Feed Dock PDSDK-ST470-VP-BX2 User Manual
Table of Contents 1. KEY FEATURES... 2 2. FUNCTIONAL PARTS... 2 3. EXPLANATION OF THE STATUS ICONS... 4 4. GETTING STARTED... 4 4.1. CHARGING THE BATTERY... 4 4.2. INSERTING A MICROSD/MICROSDHC MEMORY CARD (NOT INCLUDED)... 5 4.3. POWER ON/OFF THE SCANNER... 5 4.4. SETTING DATE & TIME/LANGUAGE... 5 4.5. CALIBRATING THE SCANNER (OPTIONAL. ONLY WHEN NEEDED)... 5 5. SETUP MENU... 6 JPG/PDF (SCAN FORMAT)... 6 SCAN QUALITY (DPI)... 6 SCAN COLOR... 6 LANGUAGE... 6 DATE/TIME... 7 INSTANT PREVIEW... 7 AUTO OFF (AUTO POWER OFF)... 7 DELETE ALL... 7 FORMATTING THE MIRCOSD MEMORY CARD... 7 DEVICE INFORMATION... 7 6. USING THE PORTABLE SCANNER... 7 6.1. USING THE HAND-HELD SCANNER TO SCAN... 7 6.2. VIEWING SCANNED FILES AFTER SCANNING... 8 7. USING THE DOCKING STATION... 9 7.1. ATTACHING THE SCANNER TO THE DOCKING STATION TO SCAN... 9 7.2. RELEASING THE SCANNER FROM THE DOCKING STATION... 11 8. CONNECTING TO A COMPUTER... 11 8.1. SCANNER WITH DOCKING STATION COMPUTER... 11 8.2. SCANNER ONLY COMPUTER... 12 9. IMAGE PREVIEW... 13 10. DELETING SINGLE FILE... 14 11. SPECIFICATIONS... 14 12. COMPUTER SYSTEM MINIMUM REQUIREMENTS... 15 13. TROUBLESHOOTING... 16 1
Getting to know your PDSDK-ST470-VP-BX2 Scanner 1. Key Features JPEG, PDF-A4 or PDF-Letter scan-format selection. Color or Monochromatic (mono) scan selection. 300 (LO)/600 (MI) /1050 (HI)/1200 (HI) DPI scan quality selection. Directly save JPG (JPEG)/PDF files to the microsd/microsdhc card. Support microsd/microsdhc memory card up to 32GB. Color display to playback the scanned images Compatible to Windows XP, Windows Vista, Windows 7, Windows 8, and Mac OS 10.5 or above (direct plug-in, driver installation not required) 2. Functional Parts 2
1 2 3 Power On/ Off: Press and hold this key for 3 seconds to turn power on or off. In Power on mode: 1) When using the scanner without the docking station, press this button to start scanning, press this button again to stop; 2) When the scanner is on the docking station with PC connection, press this button to switch between Standby mode and USB mode. In Setup mode, press this button to confirm changes. In Playback mode, press this button to change the zoom between normal, 4x, and 8x. Press this button to enter Playback mode. Press this button to return to the previous screen. In Setup mode: Press this button to exit Setup mode. Press this button to enter Setup mode. In Playback mode: Press this button to enter the single file delete mode. When zooming in under Playback mode: press this button to shift the functions of and between UP/DOWN and LEFT/RIGHT. 4 LCD screen Display scanning status, scanned image and scanner settings. 5 Paper guide tab Adjust to scan documents of different sizes. 6 7 Press this button to select JPG (JPEG), PDF-A (PDF-A4) or PDF-L (PDF-Letter) file format. The icon of the selected mode will be displayed on the LCD screen. In Setup mode: Press this button to move up the selection bar. In Playback mode: Press this button to preview the previous image. When zooming in under Playback mode: press it to move to the upper/left portion of the image. Press this button to select LO (300dpi), MI (600dpi), HI (1050dpi), or HI (1200dpi when docked) scan quality. The icon of the selected quality will be displayed on the LCD screen. In Setup mode: Press this button to move down the selection bar. In Playback mode: Press this button to preview the next image. When zooming in under Playback mode: press it to move to the lower/right portion of the image. 8 Docking latch Slide in to secure the scanner, slide out to release the scanner 9 Reset Press to reset the scanner (Hardware reset) 10 microsd card slot The microsd/microsdhc card storage location. 3
11 USB interface Connect to a computer with the USB cable provided to view and transfer files To charge up the built-in battery with an optional AC/DC power adapter 3. Explanation of the Status Icons Item Function Description 1 Scan Format JPG/PDF-A/PDF-L 2 Scan Resolution LO: 300 DPI MI: 600 DPI HI: 1050 DPI(without docking)/1200 DPI(with docking) 3 Battery Power Fully charged Indicator Low battery. Recharge needed 4 Scan Color COLOR/MONO 5 File Counter Shows the number of scanned files in the microsd card 4. Getting Started 4.1. Charging the Battery Charge the built-in battery before using the scanner. Charge time from empty to full is approx. 2.5 hours. Two Charging Methods: 1. By connecting to an AC/DC power adapter with the included USB cable via the USB interface on the scanner or the docking station when the scanner is docked. 2. By connecting to a computer with the USB cable (supplied) via the USB interface on the scanner or the docking station when scanner is docked. 4
NOTE: Once the battery is fully charged while the scanner is off, battery indicator display on LCD screen and will turn off automatically. will briefly 4.2. Inserting a microsd/microsdhc Memory Card (not included) To operate the scanner, you must insert a microsd/microsdhc card (not supplied) to record and store your pictures. To insert the microsd/microsdhc memory card: 1. Turn OFF the scanner 2. Insert the microsd/microsdhc card into the microsd card slot (with metal side facing upwards). Gently press in until the card is latched and clicked into place. 4.3. Power ON/OFF the Scanner Power on/off the scanner by pressing and holding for 3 seconds. NOTE: 1. If the scanner is turned on for the first time, it will enter Date & Time/Language setup mode. Once Date & Time/Language setting is completed, scanner will enter into standby mode. 2. If Auto off is set at "3 Min" (refer to section 5), the scanner will turn off automatically if scanner action is not detected within 3 minutes. 4.4. Setting Date & Time/Language 1. Press to jump to next setting option: YEAR MONTH DATE HOUR MINUTE. When setting up the value for MINUTE, press to return to the previous setting option until it reaches the YEAR option. 2. Press or to set the number corresponding to each setting. 3. Press to confirm and move to next setting. 4. After completing the setting for MINUTE, it will enter language setup screen. 5. Press or to select the desired language. 6. Press to confirm and enter standby status. 4.5. Calibrating the Scanner (OPTIONAL. ONLY WHEN NEEDED) NOTE: If scanned images are too dark or too bright, you may need to adjust the white balance by calibrating the scanner. 1. Take the scanner out from the docking station. 2. Wipe off any dirt on the surface of the scanning lens with the clean dry cloth provided. 3. Place the scanner on the white portion of the calibration paper provided. Press and hold the 5
button for 3 seconds to turn on the scanner. 4. Press and hold then press. Release both buttons afterwards to enter into autocalibration mode. The message 1. Calibration starts. Do not move the device! will display on LCD screen. 5. Do not move the scanner until the second message 2. Scan the calibration sheet! appears on the LCD screen. Start scanning the white portion of the calibration paper by sliding the scanner across the paper (slide the scanner backwards if necessary). 6. 3. Calibration completed! message will appear on the LCD screen when calibration is completed. Press any button to power off the scanner. 5. Setup Menu 1. Press to enter Setup menu 2. Press or to exit Setup menu. Follow the below three steps to enter setup screen for each Menu item: 1. Press to enter setup mode. 2. Press or to select the Menu item you want to set. 3. Press to enter the setup screen. Menu items Description Options JPG JPG/PDF Scan Format PDF - A (A4) PDF - L (Letter) LO-300 DPI Quality Scan Quality (DPI) MI-600 DPI HI -1050 DPI(without docking) HI -1200 DPI(with docking) Color Scan Color Color Mono Language Menu language English Spanish French German Italian Dutch Russian Japanese Traditional Chinese Simplified Chinese 6
Date/Time Inst.Preview Auto Off Delete All Format Date and Time Instant preview Auto Power Off Delete All Files Formatting the microsd memory Card Device Info Device Information / Year Month Date Hour Minute On Off Off 3 Min No Yes No Yes (All contents on microsd/mircosdhc card will be erased) 6. Using the Portable Scanner 6.1. Using the hand-held scanner to scan NOTE: To scan, make sure your scanner is not connected to the computer. 1. Power on your scanner by pressing and holding for 3 seconds. 2. Hold the document firmly with one hand on a flat surface. 3. Place the scanner on the edge of the paper approximately 5/8 to 3/4 of an inch onto the edge of the paper to ensure the whole document can be scanned. Make sure to keep the scanning area within the scanning width indicators marked on the side of the scanner. 4. Hold the scanner flat against the material and then press once to start the scanning process. 7
5. Slide the scanner across the document slowly, keeping your hand stable to get the best picture quality. 6. Press again to stop scanning when the scanner has reached to the end of the document. NOTE: 1. If the scan is done too quickly or when there is any abnormal operation, Scan Error icon will display on the LCD screen. The image will still be saved after the scanning stops. 2. If Instant Preview feature is set to on, scan result will shortly be displayed on the LCD screen before the scanner returns to standby mode. 3. When the memory card is full, the scanner is unable to scan more images. If you press the scan button under such situation, Full will flash rapidly on the File Counter of the LCD screen for 2 seconds. 6.2. Viewing scanned files after scanning Connect the scanner to the computer via USB cable provided for power. Refer to Section 8.2 for more information. 8
7. Using the Docking Station 7.1. Attaching the scanner to the Docking Station to scan 1. Slide the docking latch from Lock to Release 2. Place the scanner on the Docking Station inserting the right side of the scanner first. Make sure the scanner is securely locked to the Docking Station with a microsd card properly inserted to the portable scanner. 3. Connect the Docking Station to an outlet with the adapter or plug directly to the computer via USB cable for power. 4. Press and hold the button to turn on the scanner. 5. Adjust the paper guide tab to the size of the original. 6. Smooth the edges of the original before scanning. 7. Always align the original against the right side of the slot. 9
8. The Docking Station will automatically pass the original through. During the scan, scanning status icon will be displayed on the LCD screen to indicate scanning is in progress. Scan complete. 9. If the scanner is connected to the computer via the USB interface, press once to enter into USB mode to view scanned files on your computer. Refer to Section 8.1 for more information. NOTE: 1. If the docking station does not detect the document paper within 4-5 seconds, remove the document, realign, and try scanning again. 2. When docked, the scanner is unable to scan black or transparent documents. 3. When scanning relatively thick documents such as credit card or ID card, it is suggested to insert it vertically into the slot for a better scan. 4. The scanner will enter charging mode if no scanning action is detected within 1 minute of each scan. 10
5. If Scan Error" icon display on the LCD screen, you need to replace the original memory card with a higher class microsd/microsdhc card. (Class 6 or above is recommended). The error will still save the image after the scan completes. 6. If instant preview is set to "on", no matter if the scan result is normal or abnormal, the scanned image will be displayed shortly on the LCD screen before the scanner returns to standby mode. 7. When the memory card is full, the scanner is unable to scan more images. If you press the scan button under such situations, Full will flash rapidly on the File Counter of the LCD screen for 2 seconds. 7.2. Releasing the scanner from the Docking Station 1. Slide the docking latch from Lock to Release. 2. Take the scanner out from the docking station by lifting the left side first. WARNING: Do not press the Eject Button inside the Docking Station 8. Connecting to a Computer 8.1. Scanner with Docking Station Computer Connect your scanner with Docking Station to your computer to view pictures on the computer monitor. 1. Lock your scanner to the Docking Station and connect to your computer and then turn on your scanner. 2. Press the button once to switch into USB mode. Your computer will recognize the scanner as a Removable Disk, USB symbol will display on status LCD screen. Click Open folder to view files to view, import, copy, move or delete scanned files. 11
3. Press the button again to switch back to scanning mode. NOTE: If the Removable Device Window does not launch automatically, go to your My Computer and find the device under Removable Storage. 8.2. Scanner only Computer Connect your scanner to your computer to view pictures on the computer monitor. 1. Connect your scanner to your computer and then turn on your scanner. 2. Your computer will recognize the scanner as a Removable Disk. USB symbol will display on status LCD. Click Open folder to view files to view, import, copy, move or delete scanned files. NOTE: If the Removable Device Window does not launch automatically, go to your My Computer and find the device under Removable Storage. 12
9. Image Preview 1. Press to enter Playback mode. The last scanned image will be displayed. 2. Press or to select your desired image. Press to zoom in the image. 3. The and indicators will appear on the screen when pressing in step 2, press to view the upper portion of the image, press to view the lower portion of the image. 4. Press to change the magnification between 4x, 8x and normal zoom options. 5. The and indicators will appear on the screen when is pressed again. The functions of and will be shifted to LEFT and RIGHT and you can press or button to view the left or right portion of the image. NOTE: When zooming in under Playback mode (4x, 8x), you may choose to view upper/lower or left/right portion of the image by pressing to shift the functions of and between UP/DOWN and LEFT/RIGHT according to your needs. 13
OR 6. Press to return to the previous Playback screen, press it again to return to standby mode. NOTE: When scanning one relatively long document or scanning several documents in a row, the scanned image cannot be magnified if the file size exceeds 9 MB. 10. Deleting Single File 1. Press to enter Playback mode. 2. Press or to select the file you want to delete. 3. Press to enter Delete File mode. 4. Press or to select Yes or No Select "Yes" to delete the current file in the memory card Select "No" to return to the Playback screen. 5. Press to confirm your selection and return to the previous Playback screen. 11. Specifications Image sensor Resolution Minimum scanning speed for Letter size document A4 Color Contact Image Sensor High resolution 1200x1200 dpi (when docked) 1050x1050 dpi Medium resolution 600x600 dpi Low resolution 300x300 dpi Scanner with Dock: Color High resolution Mono High resolution Color Medium resolution Color Medium resolution Color Low resolution Mono Low resolution 14 12 Seconds 12 Seconds 12 Seconds 12 Seconds 8 Seconds 8 Seconds
Capacity (Based on 1GB microsd card. Scan Letter size file, the quantity of scans varies depending on the content complexity) Scanner without dock: Color High resolution Mono High resolution Color Medium resolution Color Medium resolution Color Low resolution Mono Low resolution Color High resolution Mono High resolution Color Medium resolution Mono Medium resolution Color Low resolution Mono Low resolution 12 seconds 10 seconds 8 seconds 6 seconds 3 seconds 2 seconds 150 Scans (Min.) (when docked) 140 Scans (Min.) 150 Scans (Min.) (when docked) 150 Scans (Min.) 550 Scans (Min.) 600 Scans (Min.) 1580 Scans (Min.) 1600 Scans (Min.) Scanner document size A4 A5 5R 4R 3R and below Scan width 8.5 Scan length 300DPI:125"(max);600DPI:60"(max); 1050DPI:50"(max)/ 1200DPI:45 (max) File format JPEG/PDF LCD approx. 1.5 Class* Color LCD Dimensions (L x H x W) 10.5 x 1.1 x 1.5 Auto power off 3 Minutes USB port USB 2.0 high speed External memory microsd/microsdhc Card Standard battery Built-in 700mAH Lithium-Polymer 12. Computer System Minimum Requirements Operating System Windows XP, Windows Vista, Windows 7, Windows 8 and Mac OS 10.5 or above (direct plug-in, driver installation not required) CPU Pentium Ⅲ or above RAM Interface At least 256MB USB port 15
13. Troubleshooting Problem Cause Solution Cannot power on the scanner Pictures cannot be saved when scanning Scan Error" icon pops up on the LCD screen while scanning Scan Error" icon pops up on the LCD screen while scanning with the docking station Computer does not recognize the scanner when connected (cannot find your device under removable disk) Black & white stripes occur at the top or bottom of scanned document Blurry images Low battery 1. The microsd/microshdc card has not been installed 2. Memory is full 3. The microsd/microsdhc card has not been formatted properly Scanning speed is too quick microsd/microsdhc class speed is low Connection failure Original skewed or inserted crookedly into the docking station 1. The lens of scanner is dirty 2. Contact Image Sensor aged Recharge the battery 1. Insert a microsd/microsdhc card 2. Transfer the pictures from the scanner to the computer to create storage space in the memory card 3. Please refer to section 5 Rescan the document at a slower pace Replace the original memory card with another higher class microsd/microsdhc card (Class 6 or above is recommended) 1. Make sure all cable connections are secure 2. Restart the computer if necessary Align and rescan the document 1. Clean the lens with a soft and dry cloth 2. Recalibrate the scanner. Refer to section 4.5 Black Images/Black or white vertical lines 1. Scanner sensor's protective glass is dirty 2. Calibration data is off-set 1. Clean the sensor s protective glass with clean and soft dry cloth. 2. Recalibrate the scanner. Refer to section 4.5 NOTE: Model Number and Serial Number (S/N) is located on the packaging, instruction manual, or on the product. Please have this information ready before contacting customer support. 16
FCC (Federal Communications Commission) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. *Measured diagonally. Actual size is 1.48 ; viewable area is 1.44 Windows XP, Windows Vista, Windows 7, Windows 8 are registered trademarks of Microsoft Corporation. Mac OS 10.5 is a registered trademark of Apple Inc. microsd and microsdhc logo is a trademark of SD-3C, LLC. All trademarks are the property of their respective owner. PDSDK-ST470-BX2-VP_Manual_13-1231 AM-N470A02-GB-VPS-1 17