www.nemko.com Nemko Canada Inc., 303 River Road, R.R. 5, Ottawa, Ontario, Canada, K1V 1H2 Report Number: Product Marketing Name: 123766-1TRFEMC Paycheck 4 Thermal Ticket Printer Test Specification: FCC 47 CFR Part 15, Subpart B Verification (USA) ICES-003 Issue 4 February 2004 (Canada) EN 55022: 2006 (European Union) Reviewed by: March 11, 2009 Signature Date Daniel Hynes, Senior EMC Specialist Tested by: David Duchesne, Senior EMC Specialist Nemko Canada Inc. authorizes the applicant to reproduce this report provided it is reproduced in its entirety and for use by the company s employees only. Any use which a third party makes of this report, or any reliance on or decisions to be made based on it, are the responsibility of such third parties. Nemko Canada Inc. accepts no responsibility for damages, if any suffered by any third party as a result of decisions made or actions based on this report. This report shall not be reproduced except in full without the written approval of the testing laboratory. Nemko Canada Inc., a testing laboratory, is accredited by the Standards Council of Canada. The tests included in this report are within the scope of this accreditation. EN22-CISPR22-FCC-ICES-AS-EN6100032-EN6100033.doc - Date: November 18, 2008
Table of Contents Declaratory Statements...3 Statement of Compliance...4 Measurement Uncertainty...5 Lab Environmental Conditions...5 Engineering Considerations...6 General Information Regarding the Equipment Under Test (EUT)...7 Equipment Configuration...7 Radiated Disturbance...8 Conducted Disturbance at Mains Port...14 Page 2 of 19
Declaratory Statements Product Marketing Name: Paycheck 4 Thermal Ticket Printer Model #: 950020 Trademark: Serial #: P353722 Applicant: Nanoptix Inc 699 Champlain Street Dieppe, NB, Canada E1A1P6 Manufacturer: Nanoptix Inc 699 Champlain Street Dieppe, NB, Canada E1A1P6 Product Background details New Product Configuration Change Other Test Specification: FCC 47 CFR Part 15, Subpart B Verification (USA) ICES-003 Issue 4 February 2004 (Canada) EN 55022: 2006 (European Union) Engineering Changes Product Audit Test Location: 303 River Road, R.R. 5, Ottawa, Ontario, Canada, K1V 1H2 Limits of Responsibility: The results included in this test report apply only to the equipment listed within this report as being the Equipment Under Test (EUT). Equipment listed as support equipment is not considered to be part of the EUT. In some instances, the EUT may consist of multiple devices, and will be so indicated in the report. Page 3 of 19
Statement of Compliance EN 55022: 2006: Class B Radiated Disturbance Conducted Disturbance at Mains Port Conducted Common mode (asymmetric mode) Disturbance at Telecommunication Ports Test Method Used: CISPR 22 System Power: 230 VAC / 50 Hz All tests were performed using measurement apparatus defined in CISPR 16-1. TEST RESULT PASS/FAIL/NA PASS PASS N/A TEST RESULT FCC 47 CFR Part 15, Subpart B for Digital Devices: Class B PASS/FAIL/NA Radiated Disturbance PASS Conducted Disturbance at Mains Port PASS Test Method Used: ANSI C63.4-2003 System Power: 120 VAC / 60 Hz The equipment was tested for conducted emissions from 0.15 MHz to 30 MHz using a 50 µh line impedance stabilization network (L.I.S.N.) as described in ANSI C63.4-2003. Peripheral equipment was also operated through a 50 µh L.I.S.N. ICES-003 Issue 4 February 2004: Class B Radiated Disturbance Conducted Disturbance at Mains Port Test Method Used: CISPR 22 System Power: 120 VAC / 60 Hz All tests were performed using measurement apparatus defined in CISPR 16-1. TEST RESULT PASS/FAIL/NA PASS PASS Page 4 of 19
Measurement Uncertainty Measurement Test Specification Ulab 9 khz 150 khz 4.0 db Conducted disturbance 150 khz 30 MHz 3.6 db 30 MHz 200 MHz Horizontal polarization 4.7 db 200 MHz 1000 MHz Horizontal polarization 4.7 db Radiated disturbance 30 MHz 200 MHz Vertical polarization 4.9 db 200 MHz 1000 MHz Vertical polarization 4.9 db Accuracy of Measurement Measurement uncertainty was calculated using the methods described in CISPR 16-4 Specification for radio disturbance and immunity measuring apparatus and methods Part 4: Uncertainty in EMC measurements and Nemko Canada Inc. procedure EMC/MUC/001 Uncertainty in EMC Measurements. Lab Environmental Conditions Ambient Temperature: 15 C to 35 C, Relative Humidity: 30 % to 60 %, Atmospheric Pressure: 86 kpa (860 mbar) to 106 kpa (1 060 mbar) Page 5 of 19
Engineering Considerations Product Modification Required for Compliance None Justification None Deviations from Standard Test Procedure None Test Report Revision History Revision # Details of changes made to test report - Original Report Issued N/A N/A Page 6 of 19
General Information Regarding the Equipment Under Test (EUT) Date Received In Laboratory: March 2, 2009 Nemko Identification Number: Item # 7 Description & Theory of Operation: The EUT is a thermal printer for ticket application. EUT Clock and Operational Frequencies: 12MHz, 200MHz Exercise/Monitoring method: Continuous print state. Tickets were visually inspected to ensure no corruption. Firmware Version: 2.91V (Testing Continuous Print) Equipment Configuration Equipment Configuration List Description Identification: (MN#, SN#, PN#, Rev.) Paycheck 4 Thermal Ticket Printer MN# 950020, SN# P353722 Nanoptix ITE Power Supply PN# GS-1110, SN# 11270010209 IBM Think Pad FA001922 IIBM AC Adapter FA001922 Configuration of the Equipment Under Test (EUT) Page 7 of 19
Radiated Disturbance Test Date: March 9, 2009 Engineer s Name: David Duchesne Configuration: Table Top Enclosure Investigation Data Result: Refer to spectral plots and tables of this section. Facility: 3m Semi Anechoic Chamber Measuring Distance: = 3 m Antenna Height: 1-4 m Preview measurements: Final measurement: 30 MHz to 1 GHz 30 MHz to 1 GHz Receiver settings: Receiver settings: Peak Detector, Max Hold Q-Peak Detector 120 khz RBW 120 khz RBW 1 GHz to 40 GHz 1 GHz to 40 GHz Spectrum analyzer settings: Receiver settings: Peak Detector, Max Hold Average Detector 1 MHz RBW/3MHz VBW 1 MHz RBW The spectral plot is a combined vertical and horizontal scan. Spectral plots have been corrected with transducer factors for antennas, cable loss, amplifiers, and attenuators. Limits have been adjusted to reflect 3 m measurements. The preview measurement was generated with receiver in continuous scan mode while the EUT was rotated and antenna adjusted for maximized radiated emission. Emissions detected within 6 db of limit were remeasured with a quasi peak or average detector for a final measurement. Notes None Deviations Refer to Engineering Considerations. Test Result Final Test Result: Pass (Class B) Page 8 of 19
Radiated Disturbance, continued Test Equipment Used Equipment Manufacturer Model No. Asset/Serial No. Next Cal. 3 m EMI Test Chamber TDK SAC-3 FA002047 May 06/09 Bilog Sunol JB3 FA002108 Jan. 27/10 Flush Mount Turntable Sunol FM2022 FA002082 NCR Controller Sunol SC104V FA002060 NCR Mast Sunol TLT2 FA002061 NCR Horn Antenna #2 EMCO 3115 FA000825 Jan. 21/10 1 18 GHz Amplifier JCA JCA118-503 FA002091 Oct 2/09 50 Coax cable HUBER + SUHNER None FA002015 Aug. 05/09 50 Coax cable HUBER + SUHNER None FA002022 July 07/09 Receiver/Spectrum Analyzer Rohde & Schwarz ESU 26 FA002043 Dec. 16/09 Note: N/A = Not Applicable, NCR = No Cal Required, COU = CAL On Use Page 9 of 19
Radiated Disturbance, continued Setup Photos Page 10 of 19
Radiated Disturbance, continued Spectral Plots 60 55 FCC Part 15 Class B Electric Field Strength 3m QP+AV 50 CISPR 22 Electric Field Strength 3 m QP Class B 45 Level in dbµv/m 40 35 30 25 20 15 10 30M 50 60 80 100M 200 300 400 500 800 1G Frequency in Hz Vertical and Horizontal (Paycheck 4 Ticket Printer) CISPR 22 QP Class B 3m Limit FCC Part 15 Class B 3m Limit Preview Peak Detector Final Q-Peak Detector Page 11 of 19
Radiated Disturbance, continued Spectral Plots, continued 60 58 56 54 FCC Part 15 Class B Electric Field Strength 3m QP+AV 52 50 Level in dbµv/m 48 46 44 42 40 38 36 34 32 30 1G 2G 3G 4G 5G 6G Frequency in Hz Vertical and Horizontal (Paycheck 4 Ticket Printer) Preview Peak Detector (Max Hold) FCC Part 15 Class B AV 3m limit Page 12 of 19
Radiated Disturbance, continued Tabular Data ICES-003 and EN 55022 Q-Peak Field Antenna Turn Freq. (MHz) Strength (dbµv/m) Meas. Time (ms) Bandwidth (khz) Height (cm) Pol. Table Position Correction (db) Margin (db) Limit (dbµv/m) 30.66 34.1 100 120 128.04 V 189 22.1 6.4 40.5 36.63 32.0 100 120 130 V 218 17.6 8.5 40.5 39.39 30.1 100 120 109.95 V 218 15.5 10.4 40.5 66.6 24.6 100 120 113 V 65 8.8 15.9 40.5 73.59 19.9 100 120 200.04 V 64 9.1 20.6 40.5 75.36 18.3 100 120 225 V 63 9.1 22.2 40.5 92.88 17.4 100 120 212.04 V 162 9.1 23.1 40.5 109.17 27.2 100 120 400.95 H 0 13.3 13.3 40.5 124.8 23.1 100 120 134 V 160 14.9 17.4 40.5 133.41 32.0 100 120 128 V 322 14.7 8.5 40.5 134.01 31.3 100 120 116.95 V 322 14.6 9.2 40.5 175.38 27.0 100 120 122.04 V -1 12.7 13.5 40.5 208.86 20.4 100 120 128.04 V 351 12.4 20.1 40.5 480.03 39.4 100 120 100 V 86 19.8 8.1 47.5 784.05 41.0 100 120 107.95 H 1 23.9 6.5 47.5 816.06 38.7 100 120 100.04 H -1 24.3 8.8 47.5 FCC 47 CFR Part 15, Subpart B Q-Peak Field Strength (dbµv/m) Antenna Height (cm) Turn Table Position Limit (dbµv/m) Freq. (MHz) Meas. Time (ms) Bandwidth (khz) Pol. Correction (db) Margin (db) 30.66 34.1 100 120 128.04 V 189 22.1 5.9 40.0 36.63 32.0 100 120 130 V 218 17.6 8.0 40.0 39.39 30.1 100 120 109.95 V 218 15.5 9.9 40.0 66.6 24.6 100 120 113 V 65 8.8 15.4 40.0 73.59 19.9 100 120 200.04 V 64 9.1 20.1 40.0 75.36 18.3 100 120 225 V 63 9.1 21.7 40.0 92.88 17.4 100 120 212.04 V 162 9.1 26.1 43.5 109.17 27.2 100 120 400.95 H 0 13.3 16.4 43.5 124.8 23.1 100 120 134 V 160 14.9 20.4 43.5 133.41 32.0 100 120 128 V 322 14.7 11.5 43.5 134.01 31.3 100 120 116.95 V 322 14.6 12.2 43.5 175.38 27.0 100 120 122.04 V -1 12.7 16.5 43.5 208.86 20.4 100 120 128.04 V 351 12.4 23.1 43.5 480.03 39.4 100 120 100 V 86 19.8 6.6 46.0 784.05 41.0 100 120 107.95 H 1 23.9 5.0 46.0 816.06 38.7 100 120 100.04 H -1 24.3 7.3 46.0 Note: Correction factor includes antenna, cable loss, amplifier, and attenuators. Page 13 of 19
Conducted Disturbance at Mains Port Test Date: March 9, 2009 Engineer s Name: David Duchesne Configuration: Table Top Port Investigation Data Port under test: AC input Result: Refer to spectral plots and tables of this section. Preview measurements: Final measurement: 0.15 MHz to 30 MHz 0.15 MHz to 30 MHz Receiver settings: Receiver settings: Peak Detector, Max Hold and Average Q-Peak Detector and Average 9 khz RBW 9 khz RBW Spectral plots have been corrected for transducer factors; cable loss, LISN, and attenuator. Emissions detected within 6 db of limit were re-measured with a quasi peak or average detector for a final measurement. Notes None Deviations Refer to Engineering Considerations. Test Result Final Test Result: Pass (Class B) Test Equipment Used Equipment Manufacturer Model No. Asset/Serial No. Next Cal. 3 m EMI Test Chamber TDK SAC-3 FA002047 May 06/09 International Power Supply California Inst. 3001i FA001021 Jan. 13/10 50 Coax cable HUBER + SUHNER None FA002015 Aug. 05/09 LISN Rohde & Schwarz ENV216 FA002023 Sept. 02/09 Receiver/Spectrum Analyzer Rohde & Schwarz ESU 26 FA002043 Dec. 16/09 Note: N/A = Not Applicable, NCR = No Cal Required, COU = CAL On Use Page 14 of 19
Conducted Disturbance at Mains, continued Setup Photos Page 15 of 19
Conducted Disturbance at Mains, continued Spectral Plots 90 85 80 75 70 Level in dbµv 65 60 55 50 45 40 35 30 25 20 15 10 5 CISPR 22 Voltage on Mains QP Class B CISPR 22 Voltage on Mains AV Class B 0 150k 300 400 500 800 1M 2M 3M 4M 5M 6 8 10M 20M 30M Frequency in Hz 120VAC/60Hz, Phase (Paycheck 4 Ticket Printer) CISPR 22 QP Class B Limit CISPR 22 AV Class B Limit Preview Peak Detector Preview Average Detector Page 16 of 19
Conducted Disturbance at Mains, continued Spectral Plots, continued 90 85 80 75 70 Level in dbµv 65 60 55 50 45 40 35 30 25 20 15 10 5 CISPR 22 Voltage on Mains QP Class B CISPR 22 Voltage on Mains AV Class B 0 150k 300 400 500 800 1M 2M 3M 4M 5M 6 8 10M 20M 30M Frequency in Hz 120VAC/60Hz, Neutral (Paycheck 4 Ticket Printer) CISPR 22 QP Class B Limit CISPR 22 AV Class B Limit Preview Peak Detector Preview Average Detector Page 17 of 19
Conducted Disturbance at Mains, continued Spectral Plots, continued 90 85 80 75 70 Level in dbµv 65 60 55 50 45 40 35 30 25 20 15 10 5 CISPR 22 Voltage on Mains QP Class B CISPR 22 Voltage on Mains AV Class B 0 150k 300 400 500 800 1M 2M 3M 4M 5M 6 8 10M 20M 30M Frequency in Hz 230VAC/50Hz, Phase (Paycheck 4 Ticket Printer) CISPR 22 QP Class B Limit CISPR 22 AV Class B Limit Preview Peak Detector Preview Average Detector Final Q-Peak Detector Final Average Detector Tabular Data Frequency Q-Peak Meas. Time Bandwidth Correction Margin Limit Filter Conductor (MHz) Result (dbµv) (ms) (khz) (db) (db) (dbµv) 0.339 48.5 100 9 On L1 10 10.7 59.2 0.39525 46.0 100 9 On L1 10 12.0 58 Frequency Average Meas. Time Bandwidth Correction Margin Limit Filter Conductor (MHz) Result (dbµv) (ms) (khz) (db) (db) (dbµv) 0.339 41.6 100 9 On L1 10 7.6 49.2 0.39525 39.8 100 9 On L1 10 8.2 48 Note: Correction factor includes cable loss, LISN, and attenuator. Page 18 of 19
Conducted Disturbance at Mains, continued Spectral Plots, continued 90 85 80 75 70 Level in dbµv 65 60 55 50 45 40 35 30 25 20 15 10 5 CISPR 22 Voltage on Mains QP Class B CISPR 22 Voltage on Mains AV Class B 0 150k 300 400 500 800 1M 2M 3M 4M 5M 6 8 10M 20M 30M Frequency in Hz 230VAC/50Hz, Neutral (Paycheck 4 Ticket Printer) CISPR 22 QP Class B Limit CISPR 22 AV Class B Limit Preview Peak Detector Preview Average Detector Final Q-Peak Detector Final Average Detector Tabular Data Frequency Q-Peak Meas. Time Bandwidth Correction Margin Limit Filter Conductor (MHz) Result (dbµv) (ms) (khz) (db) (db) (dbµv) 0.1635 50.5 100 9 On N 10.1 14.8 65.3 0.393 44.2 100 9 On N 10 13.8 58 Frequency Average Meas. Time Bandwidth Correction Margin Limit Filter Conductor (MHz) Result (dbµv) (ms) (khz) (db) (db) (dbµv) 0.33675 44 100 9 On N 10 5.3 49.3 0.393 44.1 100 9 On N 10 3.9 48 0.44925 35.6 100 9 On N 10 11.3 46.9 Note: Correction factor includes cable loss, LISN, and attenuator. Page 19 of 19