ACCESSORIES CATALOG BORING AND FACING HEADS SKODA LIVE CENTERS www.sowatool.com
SKODA LIVE CENTERS Skoda Heavy Duty Live Centers - CSN 4334/CSN 4334M Features The rotating spindle is extended right through the tapered shank Two specially designed adjustable needle-roller bearings carry all radial loads A heavy duty ball thrust bearing takes all axial thrust Complete protection of bearings form the ingress of coolant, dirt or swarf is provided by the built-in oil-seal, which also prevents loss of lubricant Centre Maximum Morse Point Body Body Body Weight of SKODA STM Taper Angle Dia. (in) Dia. (in) Length (in) Work Piece Code No. Price $ Code No. Price $ 60 5 8-3 8 4-3 8 00 lb 30-05 30-05 58.00 60 7 8-5 750 lb 30-0 53.00 30-0 0.70 3 60-8 -7 8 6-4 880 lb 30-5 9.30 30-5 9.00 4 60 - -3 6 7-860 lb 30-0 4.50 30-0 34.70 5 60-3 4-3 4 9-4400 lb 30-5 335.90 30-5 73.90 6 60-3 8 3- -3 4 8800 lb 30-30 58.0 30-30 339.60 PARTS FOR HEAVY DUTY LIVE CENTERS Skoda Model #CSN4334M has new design for part # s,3 & 6 (red) All remaining parts are used in both models Parts For Heavy Duty Live Centers Morse -Point -Point M Model 3-Ring 3-Ring M Model 4-Sleeve 5-End Plug 6-Seal 6-Seal M Model Taper Code No. Price $ Code No. Price $ Code No. Price $ Code No. Price $ Code No. Price $ Code No. Price $ Code No. Price $ Code No. Price $ 30-05 78.0 30-05M 80.70 30-0 9.80 30-0M 0.65 30-5 5.0 30-0 6.60 30-5 8.0 30-5M 4.50 3 30-305 8.50 30-305M 83.50 30-30 7.40 30-30M 8.0 30-35 59.80 30-30 8.70 30-35 8.0 30-35M 7.90 4 30-405 07.60 30-405M 09.40 30-40 0.70 30-40M.30 30-45 63.00 30-40 8.70 30-45 0.50 30-45M 6.90 5 30-505 58.60 30-505M 63.40 30-50.90 30-50M 5.40 30-55 88.00 30-50 9.80 30-55 9.30 30-55M 3.70 6 30-605 96.50 30-605M 30.80 30-60 7.80 30-60M 73.60 30-65 6.0 30-60.80 30-65 9.30 30-65M 8.00 Morse 7-Roller Bearing 8-Thrust Bearing 9-Ball Bearing 0-Set Screw -Slot Screw -Ring Taper Code No. Price $ Code No. Price $ Code No. Price $ Code No. Price $ Code No. Price $ Code No. Price $ 30-30 33.70 30-35 33.70 30-40 0.70 30-45.0 30-50 30-55 0.70 3 30-330 5.0 30-335 39.0 30-340.80 30-345 30-350.0 30-355 4 30-430 57.60 30-435 44.60 30-440.90 30-445 30-450.0 30-455.40 5 30-530 69.50 30-535 55.40 30-540 7.0 30-545 30-550.0 30-555.40 6 30-630.70 30-635 89.0 30-640 3.60 30-645.40 30-650.40 30-655.40
SKODA LIVE CENTERS Skoda Extra Heavy Duty Live Centers - CSN 4335 For clamping of heavy workpieces at lathes. The rigid structure and seating of the turning part is characterized by long service life The model EXTRA is commonly used for work at grinding machines Centers with the apex angle of 60 for reduction of deformations of the machine (tailstock, bed, headstock) from axial clamping forces The live centers are provided with shanks according to DIN 8 and ISO 96 (without clamping thread) Morse D d I L Load Weight Taper (in.) (in) a (in.) (in.) (lb) (lb) Code No. Price $ 4 3.4.58 60 4.0 7.85 3300 5 30-90,04.00 5 3.54.65 60 5.60 9.48 5500 9 30-95,36.80 6 4.9.6 60 6.4 3.38 000 7 30-930,576.40 7 5.70.56 60 7.80 5.5 7600 45 30-935 4,479.60 SPARE PARTS FOR EXTRA HEAVY DUTY LIVE CENTERS Spare Parts For Extra Heavy Duty Live Centers Spare Parts For Extra Heavy Duty Live Centers Parts No. Description Code No. Price $ MT 4-0 90 Point 30-80 363.40 4-03 60 Point 30-803 374.0 4-04 Ring 30-804 48.40 4-05 End Plug 30-805 5.0 4-06 Sealing 30-806 7.50 4-07 Roller Bearing 30-807 07.30 4-08 Thrust Bearing 30-808 5.30 4-09 Radial Bearing 30-809 7.50 4-0 Lock Screw 30-80.30 4- Packing Piece 30-8 48.90 4- Packing Ring 30-8.90 4-3 Packing Ring 30-83.50 MT 5-0 90 Point 30-86 45.0 5-03 60 Point 30-87 433.50 5-04 Ring 30-88 97.90 5.05 End Plug 30-89 3.50 5.06 Sealing 30-80 5-07 Roller Bearing 30-8 60.30 5-08 Thrust Bearing 30-8 79.80 5-09 Radial Bearing 30-83 80.30 5-0 Lock Screw 30-84.30 5- Packing Piece 30-85 05.30 5- Packing Ring 30-86.40 5-3 Packing Ring 30-87.50 Parts No. Description Code No. Price $ MT 6-0 90 Point 30-830,058.0 6-03 60 Point 30-83,097.0 6-04 Ring 30-83 3.0 6-05 End Plug 30-833 03.40 6-06 Sealing 30-834 3.50 6-07 Roller Bearing 30-835 33.40 6-08 Thrust Bearing 30-836 373.80 6-09 Radial Bearing 30-837 79.70 6-0 Lock Screw 30-838.0 6- Packing Piece 30-839 5.0 6- Packing Ring 30-840 5.00 6-3 Packing Ring 30-84.30 3
SKODA LIVE CENTERS Skoda Precision CNC Live Centers - CSN 4337-II The centers are intended for NC lathes. Their face parts are formed to allow easy access of the tool to the workpiece, which is an advantage with workpieces of complex shapes A special ring is used to set the radial clearance of the center. It also prevents cutting lubricant from leaking into the center bearing space, and so extends the operational life of the center Spindle-like point extends into shank where it is supported by a needle bearing, increasing rigidity, reducing point deflection and dampening vibration Morse D d L l Load Taper (in.) (in) (in.) (in.) (lb) Code No. Price $.5.695 5.5.65 594 30-00 304.50 3.85.750 6.75 3.50 704 30-05 3.90 4.0.5 8.5 3.95 00 30-00 376.40 5 3.0.375 0.50 4.85 350 30-05 473.60 SPARE PARTS FOR CNC LIVE CENTERS Spare Parts For CNC Live Centers Spare Parts For CNC Live Centers Parts No. Description Code No. Price $ MT -0 Point 30-855 70.0-03 Ring 30-857 0.0-04 Set Ring 30-856 33.70-05 End Plug 30-858 7.70-07 Needle Bearing 30-860 33.70-08 Thrust Bearing 30-86 39.0-09 Radial Bearing 30-86 65.0-0 Packing Piece 30-859 3.60 - Snap Ring 30-865 6.60 - Countersink Screw 30-863.00-3 Lock Screw 30-864.0 MT 3-0 Point 30-869 349.70 3-03 Ring 30-87 03.00 3-04 Set Ring 30-870 35.90 3-05 End Plug 30-87 8.70 3-07 Needle Bearing 30-874 5.0 3-08 Thrust Bearing 30-875 45.70 3-09 Radial Bearing 30-876 67.40 3-0 Packing Piece 30-873 33.70 3- Snap Ring 30-879 6.60 3- Countersink Screw 30-877.40 3-3 Lock Screw 30-878.0 Parts No. Description Code No. Price $ MT 4-0 Point 30-88 384.50 4-03 Ring 30-884 3.40 4-04 Set Ring 30-883 38.30 4-05 End Plug 30-885 8.70 4-07 Needle Bearing 30-887 57.60 4-08 Thrust Bearing 30-888 5.0 4-09 Radial Bearing 30-889 7.80 4-0 Packing Piece 30-886 34.80 4- Snap Ring 30-89 7.70 4- Countersink Screw 30-890.40 4-3 Lock Screw 30-89.0 MT 5-0 Point 30-895 343.80 5-03 Ring 30-897 88.00 5-04 Set Ring 30-896 43.50 5-05 End Plug 30-898 9.80 5-07 Needle Bearing 30-900 7 5-08 Thrust Bearing 30-90 6.90 5-09 Radial Bearing 30-90 07.60 5-0 Packing Piece 30-899 37.00 5- Snap Ring 30-905 9.80 5- Countersink Screw 30-903.40 5-3 Lock Screw 30-904.0 4
SKODA LIVE CENTERS Skoda Extended Point Live Centers - CSN 4338 Designed to keep dust, chips and coolant from coming inside the bearings Hardened and ground to 6-65 Rockwell Concentricity within.000" Morse D d L I Load Weight Point Taper (in.) (in) (in.) (in.) (lb) (lb) Angle Code No. Price $.47.866 5.059.560 594.79 60 30-60 68.40 3.850.8 6.575 3.386 704.85 60 30-65 99.70 4.65.378 8.69 4.094 00 3.9 60 30-70 5.00 5.736.77 0.97 5.078 3960 7.04 60 30-75 346.60 6 3.504.36 3.45 6.39 600 7.05 60 30-80 60.50 Skoda Heavy Duty Bull Nose Live Centers - CSN 4339 Designed to hold pipe and hollow work. Pipe head can be used as an all-round center for light work. Two matched angular contact bearings preloaded at the factory. This achieves good thrust and radial capacities. Bearings are protected by a combination steel shield and neoprene seal. Accuracy: ±0.000" Morse D d L l Load Weight Taper a (in) (in.) (in.) (in.) (lb) (lb) Code No. Price $ 3 60 3.50.378 6.380 3.89 880 4.6 30-40 665.0 4 60 4.57.73 7.637 3.6 860 9.68 30-45,07.90 5 60 5.34.8 9.449 4.33 4400 7.60 30-50,58.30 6 60 6.693.50.5 4.96 8800 5.70 30-55 3,636.90 5
SKODA LIVE CENTERS Skoda Live Center Sets - CSN 4336 Features The rotating spindle is extended right through the tapered shank Two specially designed adjustable needle-roller bearings carry all radial loads A heavy duty ball thrust bearing takes all axial thrust Complete protection of bearings from the ingress of coolant, dirt or swarf is provided by the built-in oil-seal, which also prevents loss of lubricant Morse All A B-G A B C D E F G Taper d l L L D D D D D D D D D D D D D D D Code No. Price $ 3.590.984.968.77.787.09.47.36.480.99.47.0.47.77.496.866.787.098.984 30-705 693.0 4.784.8.36.086.984.09.77.393.755.378.77.456.669.480.086.8.984.96.59 30-70 89.30 5.984.496.874.559.59.039.04.55 3.49.496.04.73.787.775.36.47.59.96.77 30-75,97.0 6.8.8 3.543 3.49.47.039.755.708 3.937.968.755.83.950 3.937 3.464.6.47.35.04 30-70,75.00 Parts For Skoda Live Center Sets Morse Part A Part B Part C Part D Part E Part F Part G Taper Code No. Price $ Code No. Price $ Code No. Price $ Code No. Price $ Code No. Price $ Code No. Price $ Code No. Price $ 3 30-74 6.00 30-76 8.50 30-78 3.70 30-730 9.0 30-73 90.0 30-734 7.60 30-736 44.50 4 30-744 45.60 30-746 08.50 30-748 7.60 30-750 98.80 30-75 06.40 30-754 54.0 30-756 56.40 5 30-764 56.40 30-766.60 30-768 338.90 30-770 8.0 30-77 33.0 30-774 79.0 30-776 77.0 6 30-784 7.60 30-786 83.50 30-788 449.60 30-790 94.30 30-79 47.90 30-794 0.00 30-796 37.90 Additional Items For Skoda Live Center Sets Live Center Internal Wooden Drift Morse Only Point Case Key Taper Code No. Price $ Code No. Price $ Code No. Price $ Code No. Price $ 3 30-7 33.00 30-73 9.60 30-738 3.50 30-740 30.40 4 30-74 48.0 30-743 05.50 30-758 5.0 30-760 38.00 5 30-76 5.30 30-763 8.30 30-778 73.0 30-780 47.70 6 30-78 848.0 30-783 86.0 30-798 95.0 30-800 80.30 6
NAREX BORING AND FACING HEADS Universal Boring And Facing Masterhead Solve ALL Your Boring and Facing Problems Model No. VHU 36 Price $ VHU 56 Price $ VHU 80 Price $ VHU 5 Price $ VHU 60 Price $ Code No. 300-007 3,59.0 300-055 4,57.0 300-05 4,830.70 300-55 6,38.70 300-05 6,90.30 QUICK RETURN MOVEMENT QUICK RETURN ADJUSTMENT THROUGH SLIDE SETTING SCREW Operating Accuracy ±.000 ±.000 ±.000 ±.000 ±.000 Boring and facing range from 0 up to 9 3 6 4 3 Max. adjustability of slide.375.5 3.5 4.875 5.750 Max. dia. of slide.750 4.50 6.50 9.750.500.00.00.00.00 Various automatic slide.006.004.004.004.004 feeds per revolution.003.006.006.006.006.0048.008.008.008.008 graduation of sensitive.0005.0005.0005.0005.0005 adjustments ins. on dia. Revolution of sensitive adjustment.06.06.06.06.06 Quick return per revolution.030.0.0.60.60 Diameter of tool post holes in slide 5 8-4 - 4 Height of Head without shank 3.5 4.350 4.350 5.000 5.000 Width of Head.875 4.500 5.500 7.000 8.75 Weight of head without shank 4 lb lb 6 lb 6.6 lb 3 lb Accessories 300-003 74.50 300-053,379.70 300-04,379.70 - - 300-0,80 Head only 300-004 3,03.0 300-054 3,430.50 300-03 3,636.0 300-54 4,598.60 300-03 4,949.0 Case only 300-006 93.40 300-05 73.70 300-0 46.80 300-04 564.90 300-04 564.90 Shank M.T. 300-00 84.90 Shank M.T. 3 300-05 300.30 Shank M.T. 4 300-00 346.60 300-060 375.40 300-0 384.0 Shank M.T. 5 300-5 467.30 300-5 467.30 300-5 467.30 300-5 467.30 Shank M.T. 6 300-65 569.70 300-65 569.70 300-65 569.70 Shank ISA - 30 300-05 6.90 Shank ISA - 40 300-030 84.90 300-070 37.90 300-070 37.90 Shank ISA - 50 300-075 40.30 300-075 40.30 300-075 40.30 300-075 40.30 Shank R - 8 300-035 9.30 300-080 60.0 Shank Straight 3/4 300-039 44.90 Shank Straight 300-040 89.00 Shank Cat - 40 300-033 384.0 300-073 44.50 Shank Cat - 50 300-076 467.30 300-076 467.30 300-076 467.30 300-076 467.30 Shank BT - 40 300-034 384.0 300-074 436.40 Shank BT - 50 300-077 467.30 300-077 467.30 300-077 467.30 300-077 467.30 Tang M.T. 300-45 4.60 Tang M.T. 3 300-50 54.60 Tang M.T. 4 300-55 75.40 300-55 75.40 300-55 75.40 Tang M.T. 5 300-60 9.00 300-60 9.00 300-60 9.00 300-60 9.00 Tang M.T. 6 300-65 0.40 300-65 0.40 300-65 0.40 Available only while supplies last. Standard Equipment Supplied With The Master Head In Case Boring bars 3 8 pcs. x 4 x 4-4 x 6-4 x 6 Boring bars 5 8 pcs. x 6 x 6-4 x 9-3 4-4 x 9-3 4 Boring bar holders * x 5- * x 5- *- 4 x 6-5 6 *- 4 x 6-5 6 * pcs. * pcs. * pcs. * pcs. Extension holder 5 8 x 3-7 8 x 6-7 8 x 6-5 8-4 x -3 6-4 x -3 6 Complete set of reinforcing rings 5 8-4 - 4 Carbide round tool bits *5 8 * * *- 4 *- 4 *4 pcs. *4 pcs. *4 pcs. *4 pcs. HSS square tool bits *5 6 x -3 6 *5 6 x -3 6 *3 8 x -3 3 *3 8 x -3 3 *4 pcs. *4 pcs. *4 pcs. *4 pcs. Reducing sleeve 5 8 x 3 8 x 3 4 x 3 4-4 x 3 4-4 x 3 4 Reducing sleeve x 5 8 x 5 8-4 x 5 8-4 x 5 8 7
NAREX BORING AND FACING HEADS Principal Component Part of Head Vhu-36. Braking ring. Engaging ring 3. Control ring 4. Scale 5. Slide 6. Setting screw 7. Holes for tools 8. Clamping screws 9. Screw for locking slide in position 0. Stop dog. Stop dog pin. Knob for rapid traverse control (only in Vhu -/4) 3. Lubricator 4. Screw for clutch adjustment 5. Clutch 6. Retaining rod Basic machining operations shown for the Vhu type universal boring heads:. Boring of holes. Spotfacing of small end large-diameter end faces 3. Recessing inside holes 4. Recessing on surfaces of parts 5. Free recessing 6. External diameter machining 7. Boring of tapered holes 8. External machining of taper 9. Facing of rear end faces 0. Thread cutting 8
NAREX BORING AND FACING HEADS NAREX BORING HEAD PARTS BREAKDOWN FOR VHU 36, 56, 80, 5, 60 VHU 36 9
NAREX BORING AND FACING HEADS NAREX BORING HEAD PARTS BREAKDOWN FOR VHU 36, 56, 80, 5, 60 CONTINUED 0
NAREX BORING AND FACING HEADS Narex Boring And Facing Head Parts VHU-36 (-3/8 ) VHU-56 (-/8 ) VHU-5 (4-7/8 ) New VHU-80 (3-/8 ) VHU-60 (6-/4 ) ID No. Description pcs Code No. Price $ pcs Code No. Price $ pcs Code No. Price $ Cap Screw 4 300-770 4 300-588.50 4 300-588.50 Ring 300-70 43.30 300-503 6.0 300-603 86.0 3 300-736 300-55 300-655 4 Flange (Hold-Ring) 300-77 90.50 300-480 (vhu-56) 304.50 300-69 537.40 300-59 (vhu-80) 50.50 5 Clutch (Safety pin) 300-76 35.80 300-505 46.80 300-605 46.80 6 Hold Ring (Brake ring) 300-703 07.90 300-504 394.0 300-604 358.30 7 Set Ring 300-704 97.0 300-506 6.70 300-606 94.00 8 300-736 300-554 300-658 9 Ring (Control Ring) 300-705 39.80 300-507 7.60 300-607 38.90 0 Spring 300-70 300-540.0 300-640.0 Spring 6 300-707 8 300-5 8 300-6 6 300-708 7.40 8 300-509 43.00 8 300-609 43.00 3 Cap Screw 300-764 300-546 300-650 4 Cover (Lid) 300-76 3.00 300-58 7.40 300-68 7.90 5 Washer 300-765 8.60 300-54.70 300-646.70 6 Star Gear (Ratchet Wheel) 300-75 6.0 300-50 75.50 300-60 79.0 7 Washer (Ring) 300-78 43.30 300-5 73.0 300-6 73.0 8 Slideguide 300-70 07.50 300-43 (vhu-56) 9.40 300-63 79.0 300-53 (vhu-80) 36.30 9 Screw 300-577.90 300-653.50 0 Spring 300-536.0 300-670.0 Brake 300-5.70 300-6.70 Washer (Ring) 300-7 50.30 300-55 6.0 300-65 6.0 3 300-769 300-55 300-655 4 Stop Screw 300-739 4 300-549.50 4 300-644.50 5 Stop (Dog) - L.H. Stop 300-78 64.60 300-55 96.90 300-65 96.90 6 Stop Nut (Insert) 300-74 40.30 300-54 9.0 300-64 9.0 7 Slide 300-73,008.80 300-40 (vhu-56),30.0 300-60 3,003.60 300-50 (vhu-80),445.30 300-680 3,633.0 8 (Bar) 300-747 6.80 300-54 6.80 300-64 9 Spring 300-746 300-570.90 300-670.0 30 Set Screw 300-774 300-508.0 300-67 3 Set Screw 3 300-735 4.80 3 300-568 9.50 3 300-674 9.50 5 300-674 9.50 3 Set Screw 3 300-74 4.80 3 300-567 9.50 3 300-673 9.50 5 300-673 9.50 33 Ball 3 300-775 3 300-558 3 300-66 34 Worm Rod (Screw) 300-7 465.80 300-43 (vhu-56) 573.0 300-63 788.0 300-53 (vhu-80) 76.50 300-69 895.60 35 Washer (Distance Ring) - Spacer 300-77 43.30 300-537 43.30 300-637 43.30 36 300-777 300-553 300-657 37 End Stop (Back Bearing) 300-77 57.60 300-538 50.30 300-638 6.0 38 End Screw 300-776 300-543 300-648 39 Stop (Dog) - R.H. Stop 300-56 96.90 300-66 96.90 40 Gear Ring 300-7 50.30 300-56 50.30 300-66 50.30 4 Spindle (Worm) 300-709 38.90 300-5 49.90 300-6 465.80 4 Worm Gear (Worm Wheel) 300-73 408.80 300-47 494.50 300-67 430.0 43 (Parallel Key) 300-766 8.60 300-59 8.60 300-69 8.60 44 Head Nut 3 300-749 3 300-57 4 300-647 45 Head Screw 3 300-748 3 300-545.50 4 300-649.50
NAREX BORING AND FACING HEADS Narex Boring And Facing Head Parts VHU-36 (-3/8 ) New ID No. 47 48 49 50 5 5 53 54 55 56 57 58 59 60 6 6 63 64 65 66 67 68 69 0 0 03 04 05 06 07 08 09 0 3 4 5 6 7 8 9 0 7P 34P 4P Description Ring (Control Ring) Ball Stop Rod (Bar) Knob (Ball) Screw Spring Point Ball Cap Screw Cap Screw pcs Code No. 300-706 300-738 300-744 300-734 Price $ 47.30 6.80 6 300-763 300-74 300-75 300-75 300-740 300-73 300-79 300-779 300-770 9.0 46.80.70.70 300-778 Plug 300-780 Ring Clip (Circlip) 300-750 Parallel key Screw 300-78 Set Screw 300-74 Screw 300-78 Boring tool Ø5mmx3/8"x60mm 300-754 Boring tool Ø3mmx5/8"x90mm 300-75 Internal corner tool Ø5mmx3/8"x60 300-755 Internal corner tool Ø3mmx5/8"x90 300-753 Right hand tool S0 300-759 Right hand tool H0 300-758 Left hand tool S0 300-757 Left hand tool H0 300-756 Tool HSS Tool S0 Extension (Boring bar) Extension (Boring bar) Toolholder (Holder with screw) Toolholder (Holder with screw) 300-73 Collar Set (Set of spacing tubes) 300-730 Reducer (Reduction sleeve) 300-733 Reducer (Reduction sleeve) Allen (Hexagon) Wrench "NAREX" 300-773 Allen (Hexagon) Wrench 4 300-760 Hexagon wrench 6 Washer 300-79 Hex Screw 300-743 Slide-set consists of parts: 7+36+37+38+8+9+30+3+3 Screw-set consists of parts: 34+4+40++35+3 Worm wheel-set consists of: 4+40++3 5.0.40 8.0 4.80 88.30 93.60 74.30 58.0 80.80 80.80 80.80 80.80 394.0 50.30 39.80 5.50 39.70 3 pcs VHU-56 (-/8 ) VHU-80 (3-/8 ) Code No. 300-50 300-556 300-558 300-535 300-559 300-547 300-59 300-530 Price $ 394.0.90 3.50.30 35.80 pcs VHU-5 (4-7/8 ) VHU-60 (6-/4 ) Code No. 300-60 300-659 300-66 300-635 300-66 300-65 300-69 300-630 6 6 300-48(vhu-56) 300-589(vhu-80).50 6 300-689.50 4 4 300-59 300-560 300-587 300-590 300-593 300-567 300-548 300-594 5.0 8.60 5.00.0 9.50 4.80 4 4 300-694 300-663 300-687 300-690 300-695 300-673 300-65 300-696 5.0.0 5.00.50 9.50 4.80 300-565 300-575 300-566 300-576 300-564 300-563 300-58 300-57 L=85 300-534 L=0 300-533 300-53 300-54 300-544 3.0 3.0 3.0 3.0 57.60 39.70 93.60 93.60 58.60 557.90 80.80 6.0 6.0 300-668 300-677 300-666 300-676 300-667 300-669 300-68 300-67 300-634 L=350 300-633 300-63 300-64 300-608 50.80 50.80 50.80 50.80 68.0 09.60 3.80 333.30 557.90 63.30 00.50 93.60 97.0 300-56 300-56 300-53 300-550 39.70 48.50 46.80.0 300-664 300-665 300-63 300-654 39.70 5.40 46.80.0 Price $ 49.90.90 4.0.30 35.80 Distributed By: Pricing in US Dollars subject to change without notice. 46 Dussel Drive Maumee, Ohio 43537 Maumee, Ohio Toll Free: -800-65-8 Phone: (59) 748-5750 Toll Free Fax: -866-5-769 Fax: (59) 748-9304 Email: sales@sowatool.com web: www.sowatool.com *USAC4* Printed In Canada