COMBINATION WRENCH SETS These combination wrenches are boxed on one end and open on the other. They are drop forged, machined, heat treated, triple chrome plated and held to tight tolerances so there is no sloppy fit on the bolt or nut. These wrenches have raised panels for strength and the sets come inside a roll up pouch with grommets on the corners for hanging. 5 PC. SAE COMBO WRENCH SET: 3/8-7/16-1/2-9/16-5/8 11 PC. SAE COMBO WRENCH SET: 3/8-7/16-1/2-9/16-5/8-11/16 3/4-13/16-7/8-15/16-1 810 11 PC. METRIC COMBO WRENCH SET: 6mm - 7mm - 8mm - 10mm - 11mm - 12mm 13mm - 14mm - 15mm - 17mm - 19mm N799 811 14 PC. SAE COMBO WRENCH SET: 3/8-7/16-1/2-9/16-5/8-11/16 3/4-13/16-7/8-15/16-1 - 1-1/16 1-1/8-1-1/4 14PC 14 PC. METRIC COMBO WRENCH SET: 9mm - 11mm - 13mm - 14mm - 15mm 17mm - 19mm - 21mm - 23mm - 24mm 25mm - 27mm - 30mm - 32mm 813
22 PC. SAE & METRIC COMBO SET Highly polished, chrome vanadium steel wrenches in both SAE and metric in an organized, vinyl pouch. These wrenches are heat treated and tempered for strength and feature the raised panel design. The set includes 11 SAE sizes from 1/4 to 7/8 and 11 metric sizes from 7mm to 19mm. The boxed ends are 12 point and this set is manufactured to rigid standards to assure a lifetime of use. Import. 24PC 22 PC. COMBO WRENCH SET SAE & METRIC
CONTINUOUS COMBO WRENCHES METRIC This is the Cadillac of metric box & open end wrench sets. Drop forged, specially hardened and triple chrome plated, but the best feature of this set is that they do not skip a size like other sets. They are 12 point boxed on one end and open on the other with rich, hand polished, smooth handles. Both versions of this set are exceptional quality at an incredible price. Imported. 808-11 PC. METRIC WRENCH SET SIZES: 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, & 19mm 809-13 PC. METRIC WRENCH SET SIZES: 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, & 32mm 808 11 PC. METRIC WRENCH SET - 9mm-19mm 809 13 PC. METRIC WRENCH SET - 20mm-32mm
LARGE COMBO WRENCH SETS These larger combination wrench sets are made of chrome vanadium steel with a black oxide finish and raised panel for extra strength. They feature 12 point, chamfered boxed ends and a 15 offset on the open end. Each set comes in a roll up, vinyl pouch with a Velcro fastener and a carry handle for convenience. Import. 6 PC. JUMBO WRENCH SET SAE 1-3/8, 1-1/2, 1-5/8, 1-3/4, 1-7/8, & 2 815 6 PC. JUMBO WRENCH SET METRIC 35mm, 38mm, 41mm, 44mm, 48mm, & 50mm 819 11 PC. COMBO WRENCH SET METRIC 34mm, 35mm, 36mm, 38mm, 40mm, 41mm, 42mm, 44mm, 46mm, 48mm & 50mm 814M 10 PC. COMBO WRENCH SET SAE 1-5/16, 1-3/8, 1-7/16, 1-1/2, 1-5/8, 1-11/16, 1-3/4, 1-13/16, 1-7/8 & 2 814 4 PC. SUPER JUMBO WRENCH SET - SAE 2-1/8, 2-1/4, 2-3/8, 2-1/2, 816
ANGLE WRENCHES Both ends of these wrenches are open for easy placement on hidden nuts or bolts. One end is offset 15 and the other end is offset 60 allowing better leverage and a longer turn on fasteners in a confined space or hidden behind a larger object. Made of chrome vanadium steel and triple chrome plated and polished to resist corrosion and wear. Sets come in a roll up, vinyl pouch. Import. 11 PC. ANGLE WRENCH SET SAE 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, & 1 807 6 PC. ANGLE WRENCH SET SAE - JUMBO 1-3/8, 1-1/2, 1-5/8, 1-3/4, 1-7/8, & 2 821 14 PC. ANGLE WRENCH SET SAE 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1, 1-1/16, 1-1/8, 1-1/4 ANGLE 10 PC. ANGLE WRENCH SET METRIC 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm ANGLEM
S SHAPED BOX WRENCHES These wrenches have 12 point box ends on each side and feature 90 offset heads. The lazy S design allows them to fit easily into hard to reach places while still providing a good grip and better leverage for the user. Each wrench is drop forged, machined, heat-treated and polished to last for years. There are two different sizes on each wrench, so each set has ten sizes even though there are only five wrenches. Available in both SAE and metric and includes a vinyl, roll up pouch. Imported. SAE 3/8 & 7/16 1/2 & 9/16 5/8 & 11/16 3/4 & 13/16 7/8 & 1 Metric 10mm & 11mm 12mm & 13mm 14mm & 15mm 16mm & 17mm 18mm & 19mm 822 822M 822 5 PC. S SHAPED BOX WRENCH SET SAE 822M 5 PC. S SHAPED BOX WRENCH SET METRIC
5 PC. RATCHETING BOX WRENCH SET These boxed end wrenches have a ratcheting mechanism built right into each box end of the wrench. No need for changing sockets on a ratchet. Just grab the ratcheting wrenches and go to work! These wrenches make great emergency tool kit items because they save space, and each end is a different size, so you actually get ten sizes with just five wrenches. They are offset at the heads for easy use in tight spots. The laminated steel construction adds strength and reduces weight. For reversing action, simply push the reverse button. Available in both SAE and metric. Imported. SAE 1/4 x 5/16, 3/8 x 7/16, 1/2 x 9/16, 5/8 x 3/4, 11/16 x 7/8 Metric 5.5mm x 7mm, 6mm x 8mm, 10mm x 11mm, 12mm x 14mm, 15mm x 17mm 638 5 PC. RATCHETING BOX WRENCH SET - SAE 638M 5 PC. RATCHETING BOX WRENCH SET - METRIC
6 PC. FLEX COMBO WRENCH SETS These combo wrench sets have 6 wrenches that have standard open ends on one side and feature a swivel socket on the other. Not only do you get the same size socket as the open end size, but the socket can swivel from side to side, making it very useful in confined spaces. The socket ends are 12 point for sure grip and they are drop forged, heat treated, machined, triple chrome plated and polished. They come in a handy roll up pouch and are available in SAE only. Import. SAE 3/8, 7/16, 1/2, 9/16, 5/8, 3/4 637 6 PC. FLEX COMBO WRENCH
FLEX GEAR WRENCH SETS These flex gear wrenches are constructed of heat treated chrome vanadium steel with a highly polished mirror finish. The ratcheting box end flexes 180 to allow the user to attack a fastener at any angle. Available in SAE and metric and each set comes in a roll up pouch. SAE 3/8, 7/16, 1/2, 9/16, 5/8, 11/16 & 3/4 Metric 10mm, 12mm, 13mm, 14mm, 15mm, 17mm & 18mm 828 7 PC. FLEX HEAD GEAR WRENCH SET - SAE 828M 7 PC. FLEX HEAD GEAR WRENCH SET - METRIC
CROWFOOT WRENCH SETS Crowfoot wrenches are open end wrench heads that are used with a 3/8 drive hand ratchet. They re made to get into hard to reach areas where there is limited room for turning a nut or bolt. They work excellent with extension bars attached to the ratchet and when attached are set at a 90 angle. These 10 piece sets are available in SAE or in metric sizes and come on a rail type holder. They re heat treated and triple chrome plated. Imported. SAE 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 1 Metric 10mm, 11mm, 13mm, 14mm, 15mm, 17mm, 19mm, 21mm, 22mm, 23mm 801 10 PC. CROWFOOT WRENCH SET - SAE 801M 10 PC. CROWFOOT WRENCH SET - METRIC
STEEL PIPE WRENCH SET These are drop forged, cast steel pipe wrenches with hardened steel jaws and precision milled teeth. They have a smooth spinning thumb dial to adjust the jaw opening. The handles are electrostatically powder coated and heat cured which is a harder and more durable finish than standard enamel paint. This four piece set includes one each of 8, 10, 14 and 18. Import. 837 4 PC. STEEL PIPE WRENCH SET
ALUMINUM PIPE WRENCHES Aluminum pipe wrenches are lightweight, easy to handle, and will do the same job that steel pipe wrenches do, but with half the effort. They are made from a special alloy called AMT (Aluminum, Magnesium, & Titanium). They feature heavy duty, tempered steel jaws and though these wrenches are super lightweight, they re not easily broken or warped even when using a cheater bar for better leverage. Available in individual sizes or in a 3 piece set which includes each of the following: 14, 18, and 24. Import. 831 3 PC. ALUMINUM PIPE WRENCH (14, 18, 24 ) 832 14 ALUMINUM PIPE WRENCH 833 18 ALUMINUM PIPE WRENCH 834 24 ALUMINUM PIPE WRENCH 835 36 ALUMINUM PIPE WRENCH 836 48 ALUMINUM PIPE WRENCH
SELF ADJUSTING PIPE WRENCHES These self adjusting pipe wrenches automatically grip pipes, tie rods, and suspension rods and will release quickly, a great function in confined areas. They have CrV jaws and dual color, malleable cast iron bodies and they are designed with fewer moving parts. This 4 piece set includes a 10, 14, 18 and 24 wrench and they have maximum effective gripping ranges of 1-5/8 on the 10, 2 on the 14, 2-3/8 on the 18 and 3 on the 24. Set weighs 15.5 lbs. Import. N831 4 PC. SELF ADJUSTING PIPE WRENCH SET
ADJUSTABLE WRENCHES These heavy duty, adjustable wrenches have a Rockwell hardness of HRC 60 and are triple chrome plated and polished. They close tight and won t slip off of the nut or bolt head because the jaws remain parallel even when under extreme pressure. Import. Specifications: Size: Capacity: Weight: 6 7/8 0.4 oz 8 1 0.8 oz 10 1-3/16 1 lb 12 1-3/8 1.08 lb 15 1-3/4 2.10 lb 18 2-1/16 4.11 lb 24 2-1/2 8.50 lb SIZE: AW6 6 ADJUSTABLE WRENCH AW8 8 ADJUSTABLE WRENCH AW10 10 ADJUSTABLE WRENCH AW12 12 ADJUSTABLE WRENCH AW15 15 ADJUSTABLE WRENCH 817 18 ADJUSTABLE WRENCH 818 24 ADJUSTABLE WRENCH
6 PC. FLARE NUT WRENCH SET These are also called line wrenches. They re almost a boxed end but opened slightly so that they can be slipped over tubing or hoses to get to a nut or fitting. They hold on better than an open end wrench and fit exactly like a boxed end wrench but slip easily over a connected line. Made of chrome vanadium, machined and hardened steel. Imported. SAE SIZES 1/4 to 5/16 3/8 to 7/16 1/2 to 9/16 5/8 to 11/16 3/4 to 13/16 7/8 to 1 METRIC SIZES 6mm to 8mm 10mm to 12mm 13mm to 14mm 15mm to 17mm 19mm to 21mm 22mm to 24mm 802 6 PC. FLARE NUT WRENCH SET - SAE 802M 6 PC. FLARE NUT WRENCH SET - METRIC
6 PC. OFFSET WRENCH SET These wrenches have 12 point boxed ends on both sides that are offset 90 to easily access tight places. The angle allows the handle to sit up higher turning freely above an obstacle that would otherwise be in the way. They re drop forged, machined, heat treated and polished and come in a roll up canvas and vinyl pouch. Imported. SAE SIZES 3/8 to 7/16 1/2 to 9/16 5/8 to 11/16 3/4 to 25/32 13/16 to 7/8 15/16 to 1 METRIC SIZES 10mm to 11mm 12mm to 13mm 14mm to 15mm 16mm to 17mm 18mm to 19mm 20mm to 22mm 805 6 PC. OFFSET BOX END WRENCH SET - SAE 805M 6 PC. OFFSET BOX END WRENCH SET - METRIC
7 PC. PRO GEAR WRENCH SET Gear wrenches are box & open wrenches with a thin, heavy duty ratchet system built into the boxed end side of the wrench. This allows for the quick movement of a 5 rotation over and over until the nut or bolt is off. They are also very handy in tight spaces. These wrenches are made of chrome vanadium steel that is drop forged, heat treated, and polished to a mirror finish. Imported. SAE 3/8, 7/16, 1/2, 9/16, 5/8, 11/16 & 3/4 Metric 8mm, 10mm, 12mm, 13mm, 14mm, 15mm & 18mm 825 7 PC. PRO GEAR WRENCH SET - SAE 825M 7 PC. PRO GEAR WRENCH SET - METRIC
BOX & OPEN END WRENCHES INDIVIDUAL SIZES These individual sized box and open end wrenches are made from drop forged A36 steel that is heat treated, precision ground and then triple chrome plated and polished for a great look and feel. They have raised panels for extra strength and are available in all sizes in metric from 6mm to 65mm or SAE from 1/4 to 2-1/2. Imported. Metric Wrench SAE Wrench SIZE: SIZE: OB6 6 mm OB14 1/4 OB7 7 mm OB516 5/16 OB8 8 mm OB38 3/8 OB9 9 mm OB716 7/16 OB10 10 mm OB12 1/2 OB11 11 mm OB916 9/16 OB12M 12 mm OB58 5/8 OB13 13 mm OB1116 11/16 Sizes continue on next page
Metric Wrench SAE Wrench OB14M 14 mm OB34 3/4 OB15 15 mm OB1316 13/16 OB16 16 mm OB78 7/8 OB17 17 mm OB1516 15/16 OB18 18 mm OB1 1 OB19 19 mm OB1&116 1-1/16 OB20 20 mm OB1&18 1-1/8 OB21 21 mm OB1&316 1-3/16 OB22 22 mm OB1&14 1-1/4 OB23 23 mm OB1&516 1-5/16 OB24 24 mm OB1&38 1-3/8 OB25 25 mm OB1&716 1-7/16 OB26 26 mm OB1&12 1-1/2 OB27 27 mm OB1&58 1-5/8 OB28 28 mm OB1&1116 1-11/16 OB29 29 mm OB1&34 1-3/4 OB30 30 mm OB1&1316 1-13/16 OB31 31 mm OB1&78 1-7/8 OB32 32 mm OB2 2 OB33 33 mm OB2&18 2-1/8 OB34M 34 mm OB2&14 2-1/4 OB35 35 mm OB2&38 2-3/8 OB36 36 mm OB2&12 2-1/2 OB38M 38 mm OB40 40 mm OB41 41 mm OB42 42 mm OB44 44 mm OB45 45 mm OB46 46 mm OB48 48 mm OB50 50 mm OB55 55 mm OB57 57 mm OB60 60 mm OB65 65 mm
JUMBO CROWFOOT WRENCHES Crowfoot wrenches help to speed up installation of hard to reach fasteners and work where no conventional socket can. They snap onto any 1/2 drive ratchet and operate just like a socket but with the configuration of an open end wrench. Each wrench features the size clearly imprinted on it. These sets are 1/2 drive, available in SAE and Metric and made of black oxide coated, chrome vanadium steel. Each set comes in a heavy duty, blow mold carrying case. Ratchet not included. Import. 14 PC. SAE CROWFOOT WRENCH SET 1-1/16", 1-1/8", 1-3/16", 1-1/4", 1-5/16", 1-3/8", 1-7/16", 1-1/2", 1-5/8", 1-11/16", 1-3/4", 1-13/16", 1-7/8"& 2" 14 PC. METRIC CROWFOOT WRENCH SET 27mm, 29mm, 30mm, 32mm, 33mm, 34mm, 35mm, 36mm, 38mm, 41mm, 43mm, 46mm, 48mm & 50mm. N803 N803M JUMBO CROWFOOT WRENCH SET - SAE JUMBO CROWFOOT WRENCH SET - METRIC
5 PC. BLACK CR-V ADJUSTABLE WRENCH SET This is a top quality, Chrome Vanadium Steel, adjustable wrench set with the black oxide, industrial finish. The finish on this set will prevent chipping and flaking and resists rust and corrosion. The hardened steel jaws provide greater strength and they are tapered to allow easy access in tight work areas. They have easy to read measurements in SAE on one side and Metric on the other with an alignment arrow on the sliding jaw to make adjusting to the correct size of the nut or bolt very easy. This is a really nice 5 wrench set that anyone would be proud to have in their shop, truck or toolbox. Includes one each of 4, 6, 8, 10 and 12 and stores in a heavy duty canvas pouch. N158 5 PC. BLACK CRV ADJUSTABLE WRENCH SET
BLACK CR-V ADJUSTABLE WRENCHES These are top quality, Chrome Vanadium Steel, adjustable wrenches with the black oxide, industrial finish. The finish on this set will prevent chipping and flaking and resists rust and corrosion. The hardened steel jaws provide greater strength and they are tapered to allow easy access in tight work areas. They have easy to read measurements in SAE on one side and Metric on the other with an alignment arrow on the sliding jaw to make adjusting to the correct size of the nut or bolt very easy. These are really nice, heavy duty, individual wrenches that anyone would be proud to have in their shop, truck or toolbox. N159 N160 N161 15 BLACK CRV ADJUSTABLE WRENCH SET 18 BLACK CRV ADJUSTABLE WRENCH SET 24 BLACK CRV ADJUSTABLE WRENCH SET
8 PC. BLACK CR-V ADJUSTABLE WRENCH SET This is a top quality, Chrome Vanadium Steel, adjustable wrench set with the black oxide, industrial finish. The finish on this set will prevent chipping and flaking and resists rust and corrosion. The hardened steel jaws provide greater strength and they are tapered to allow easy access in tight work areas. They have easy to read measurements in SAE on one side and Metric on the other with an alignment arrow on the sliding jaw to make adjusting to the correct size of the nut or bolt very easy. This is a really nice 8 wrench set that anyone would be proud to have in their shop, truck or toolbox. Includes one each of 4, 6, 8, 10, 12, 15, 18, and 24. N162 8 PC. BLACK CRV ADJUSTABLE WRENCH SET
ADJUSTABLE FAS-WRENCHES This remarkable tool works like a ratchet wrench but with the features of an adjustable wrench. No more lifting the wrench from the bolt to tighten or loosen after each movement, simply adjust the jaws to fit and tighten like a ratchet. They are made of chrome vanadium steel with a matt finish and have a rubberized, anti-slip handle which ensures a comfortable grip. They read in inches on one side of the wrench head and in metric on the other. Available in 8 and 10. Import. N174 N175 8 ADJUSTABLE FAS-WRENCH 10 ADJUSTABLE FAS-WRENCH
10 PC. JUMBO SAE WRENCH SET The wrenches in this monster, 10 piece set are between 18 to 24 long with a capacity from 1-5/16 to 2 between the 10 wrenches. They are made extra long for maximum grip and leverage. They have a 12 point box end on one side and the open end on the other and are made tough from chrome vanadium steel with the black oxide finish and raised panels along the sides for extra strength. They are corrosion proof and rust resistant and come with a roll up, vinyl and canvas, hang up pouch. 1-5/16, 1-3/8, 1-7/16, 1-1/2, 1-5/8, 1-11/16, 1-3/4, 1-13/16, 1-7/8 & 2 Imported N10PCB 10 PC. JUMBO COMBO WRENCH SET
16 PC. COMBO WRENCH SET These are Neiko Tools, raised panel wrenches that are case hardened from pure alloyed steel, and drop forged in a unique two step process. They have a black oxide finish for longer durability and corrosion resistance, and because they are so tough, they carry a Lifetime Guarantee. Imported. N16PC - 16 PC. SAE SET N16PCM - 16 PC. METRIC 1/4 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4 3/16 7/8 15/16 1 1-1/16 1-1/8 1-1/4 6 mm 8 mm 9 mm 10 mm 11 mm 12 mm 13 mm 14 mm 15 mm 17 mm 19 mm 21 mm 24 mm 27 mm 30 mm 32 mm Vinyl carrying pouch included. N16PC N16PCM 16 PC. COMBO WRENCH SET - SAE 16 PC. COMBO WRENCH SET - METRIC
4 PC. ADJUSTABLE WRENCHES W/ COMFORT GRIP These Adjustable wrenches are manufactured to precision standards. The jaws remain tight no matter how far you open them which prevents slipping as well as scraped and banged knuckles. The 6 wrench opens to 3/4 and the largest, the 12 wrench, opens to a maximum 1-3/8 and they feature soft grip, coated handles for comfort. The jaws are nickel plated to prevent rust and corrosion and a millimeter scale is imprinted on the jaw opening for accuracy. This set includes one each of 6, 8, 10 and 12 and comes in a handy rollup, vinyl pouch. Imported. N4PCA 4 PC. COMFORT GRIP WRENCH SET
JUMBO GEAR WRENCHES These gear wrenches are box & open wrenches with a thin, but heavy duty ratcheting system built into the box end side of the wrench. The gears are 72 tooth precision cut cogs that allow for a quick movement of 5 rotations over and over until the nut or bolt is off. They can be used just like regular wrenches but where space is limited and a turning radius is restricted, the gear end is extremely convenient. Imported. SAE 13/16, 15/16", 7/8" & 1" Metric 21mm, 22mm, 24mm & 25mm N829 N829M 4 PC. JUMBO GEAR WRENCH SET - SAE 4 PC. JUMBO GEAR WRENCH SET - METRIC
DUOMETRIC GEAR WRENCH SETS These gear wrenches are made of chrome vanadium steel drop forged, hardened, tempered and then mirror polished with a black nickel finish. The box end features a 72 teeth gear with ratcheting action and they fit both SAE and metric sizes. These sets are beautifully placed in an aluminum carrying case with a hard foam interior and the sizes for each wrench are boldly marked on both the carrying case insert and the wrench itself. 12 PC. DUOMETRIC GEAR WRENCH SET 12 piece set covers 19 sizes: 8mm (5/16 ), 3/8, 10mm (25/64 ), 11mm (7/16 ), 12mm (15/32 ), 13mm, 1/2, 9/16, 15mm (19/32 ), 16mm (5/8 ), 11/16, & 19mm (3/4 ) DM12PC 13 PC. DUOMETRIC GEAR WRENCH SET - STUBBY This set is stubby length for hard to reach places. 13 piece set covers 20 sizes: 8mm (5/16 ), 3/8, 10mm (25/64 ), 11mm (7/16 ), 12mm (15/32 ), 13mm, 1/2, 9/16, 15mm (19/32 ), 16mm (5/8 ), 11/16, 18mm & 19mm (3/4 ) DM13PC
LONG REACH WRENCH SET The wrenches in these box and open end sets are just a couple of inches longer than the average combination wrench, so you get the advantages of a longer reach and more leverage to get the job done the first time. They re beautifully polished, triple chrome plated, and heat treated and they also have the raised panels for extra strength. They come with a heavy duty roll up pouch with grommets for hanging if needed. IMPORTED 14 PC. SAE LONG REACH SET N39 3/8-7/16-1/2-9/16-5/8-11/16 3/4-13/16-7/8-15/16-1 - 1 1/16 1 1/8-1 1/4 16 PC. METRIC LONG REACH SET N39M 10mm - 11mm - 12mm - 13mm - 14mm 15mm - 17mm - 18mm - 19mm - 20mm 21mm - 23mm - 25mm - 28mm - 30mm 32mm N39 N39M 14 PC. LONG REACH WRENCH SET - SAE 16 PC. LONG REACH WRENCH SET - METRIC
OFFSET ALUMINUM PIPE WRENCHES Made with a special alloy called A.M.T. (Aluminum, Magnesium, & Titanium, these pipe wrenches will do everything a steel pipe wrench will do and more. Because they re lighter in weight, however, user fatigue is greatly reduced. These wrenches have the same quality and specs as standard aluminum pipe wrenches but the steel heads are offset to a 20 angle allowing the user to reach into tighter areas including right up next to walls. They are available individually in 14 and 18 or as a 3 piece set which includes a 14, an 18 and the large 24. (24 wrench is not sold separately.) 140S 180S N3PC-AO 14 OFFSET ALUMINUM PIPE WRENCH 18 OFFSET ALUMINUM PIPE WRENCH 3 PC. OFFSET ALUMINUM PIPE WRENCH SET
SOFT GRIP WRENCH SETS These box and open end wrench sets consist of tool tempered steel cores that have been heat treated and triple chrome plated to a mirror finish. They are then form fitted with a bright red, comfort grip sleeve onto the full length of the handle to provide a cushion that absorbs shock. The grips are also a non slip material that will prevent the wrench from slipping if it becomes greasy or oily, and they wipe perfectly clean! The size of each wrench is also printed clearly on each handle and the set comes in a sturdy canvas, roll up pouch with grommets for hanging. Imported. 11 PC. SOFT GRIP SET- SAE 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, & 7/8 N11PC 14 PC. SOFT GRIP SET - METRIC 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm & 19mm N14PCM 5 PC. SOFT GRIP SET - SAE JUMBO 15/16, 1, 1-1/16, 1-1/8, & 1-1/4 N5PC 8 PC. SOFT GRIP SET - METRIC JUMBO 20mm, 21mm, 23mm, 24mm, 27mm, 29mm, 30mm & 32mm N8PCM
NEIKO PRO TORQUE WRENCHES These torque wrenches can take a beating and will read accurately every time. They are the click type with the twist dial at the bottom of the wrench and have the soft grip handles. To operate, simply dial in the torque setting you want, tighten the bolt or nut, and when desired torque level is reached the wrench will click, letting you know you have achieved the correct tightness. These wrenches are rugged, professional, and precision machined for all high tech applications. IMPORTED 1/4 Dr. Torque Wrench Range: 40 250 Inch Lbs Grade: 1 In/Lb Length: 12 3/8 Dr. Torque Wrench Range: 15 80 Foot Lbs Grade:.5 Ft/Lb Length: 15 1/2 Dr. Torque Wrench Range: 50 250 Foot Lbs Grade: 1 Ft/Lb Length: 25.5 3/4 Dr. Torque Wrench Range: 50 300 Foot Lbs Grade: 1 Ft/Lb Length: 34 N114 N115 N116 N117 1/4 TORQUE WRENCH - NEIKO 3/8 TORQUE WRENCH - NEIKO 1/2 TORQUE WRENCH - NEIKO 3/4 TORQUE WRENCH - NEIKO
OCTA-METRIC COMBO WRENCHES These amazing wrenches eliminate the need for several different types of other wrenches by combining 6 point SAE and 6 point metric, 12 point SAE and 12 point metric, spline drive, E -torque, and square drive into one multi fit boxed wrench. Will also easily remove nuts and bolts up to 30% damaged and worn. Made of chrome vanadium steel and polished to a silver satin finish. This 11 piece set ranges from 8mm to 19mm or 5/16 to 3/4. Comes in a handy plastic holder with handle and conforms to ASME B 107-100.2002. Import. NOM11 11 PIECE OCTA-METRIC WRENCH SET
RATCHET CHAIN WRENCHES These ratcheting chain wrenches feature a high carbon drop forged steel ratcheting mechanism that can grab and turn objects as small as 1/2" up to as large as a 5" outside diameter on the 12 wrench and 6-1/2 outside diameter on the 20 wrench. The longer handle on the 20 wrench will give you more leverage. They re simple to use by wrapping the chain around any object and after a turn, just back the tool up in the opposite direction and it will grab again in a new position, without removing it from the object. Works easily on various shaped objects, such as square, round, hexagon, octagon, oval, and many irregular shapes and they work especially well with water pipes, filters and holding pulleys. The handles are made from drop forged, heat treated, alloy steel and the chain length is 19-1/2" on the 12 wrench and 24-1/2 on the 20. Both have a cushioned grip for better grasp and less hand fatigue. Imported. N141 N142 20 RATCHETING CHAIN WRENCH 12 RATCHETING CHAIN WRENCH
STUBBY WRENCHES These stubby wrenches are only 4 to 5 and fit right in the palm of your hand. They re boxed on one end and open on the other and made short to fit into very tight spots while still allowing good leverage. They re drop forged, machined, heat treated and triple chrome plated and are held to tight tolerances so they fit a nut or bolt snuggly without slipping. SAE 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 15/16 & 1 Metric 8mm, 10mm, 12mm, 14mm, 15mm, 16mm, 17mm & 19mm 804 8 PC. STUBBY WRENCH SET - SAE 804M 8 PC. STUBBY WRENCH SET - METRIC
STUBBY GEAR WRENCH SET Gear wrenches are box & open wrenches with a thin, heavy duty ratchet system built into the boxed end side of the wrench. This allows for the quick movement of a 5 rotation over and over until the nut or bolt is off. Because of their stubby length, these wrenches are real easy to get into a tight spot and fit right in the palm of your hand for a much more comfortable grip and better leverage than longer wrenches. These wrenches are made of chrome vanadium steel that is drop forged, heat treated, and polished to a mirror finish. Imported. Specifications: 7 PC. SAE 3/8, 7/16, 1/2, 9/16, 5/8, 11/16 & 3/4 10 PC. Metric 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, & 19mm Includes roll-up, canvas pouch 826 7 PC. STUBBY GEAR WRENCH SET SAE 827 10 PC. STUBBY GEAR WRENCH SET METRIC