Road Marking Systems AIRFIELD MARKINGS INNOVATIVE PRODUCTS FOR SAFETY AND ORIENTATION ON AIRPORTS SWARCO LIMBURGER LACKFABRIK GmbH is Germany s leading manufacturer of liquid road marking materials and a full-range supplier of conventional and special purpose marking systems. Your reliable partner for innovative and well-proven marking materials for airports. We are your one-stop shop for airport & airfield marking solutions. We integrate all factors that result in best-performing airfield marking systems: marking materials reflective glass beads application know-how MARKING MATERIALS Increase safety with materials from SWARCO LIMBURGER LACKFABRIK GmbH. Our solutions: LIMBOROUTE & LIMBOPLAST: The solution for heavy traffic impact on airfields. LIMBOROUTE - HIGH SOLID PAINT, SWARCOMARK: The solution for all kinds of airfield markings. ROAD MARKINGS: We offer the full range of paints, coldplastics and thermoplastics for roadways at airports. AFTERGLOW PAINTS: Luminescent markings for car parks, escape routes and indoor guidance & orientation. RETROREFLECTIVE GLASS BEADS SWARCO operates Europe s only production site for high-index beads with a refractive index of 1.9+. The marking itself is usually a system consisting of a road marking material and glass beads for retroreflection and night visibility. Trust in M. SWAROVSKI, SWARCO s competence centre for the production and R&D of high-quality glass beads. SWARCO plus9beads for airfield markings deliver 5 times better visibility compared to conventional microspheres and respond to the landing lights of airplanes. APPLICATION KNOW-HOW SWARCO has the professional equipment and expertise to apply all types of marking materials. SWARCO I First in Traffic Solutions.
Germany s no. 1 in liquid marking materials SWARCO LIMBURGER LACKFABRIK GmbH is the largest road marking material manufacturer in Germany. In 1997 the new production plant, sales and R&D departments were modernized and relocated to Limburg s neighbouring town of Diez / Germany. QUALITY MARKING SYSTEMS FOR AIRPORTS: The success of our airport marking systems can be seen from a long list of references: almost all German and Austrian airports numerous airports in the USA US air bases in Europe RAF bases in Great Britain airports of Copenhagen, Baghdad, Budapest, Aviano a number of Romanian airports such as International Airport Bucharest, Timisoara, Bacau and Sibiu airports in Riga, Tripolis, Tashkent, Moscow, Baku, Kuwait and Qatar All these airports have increased their safety by adopting our quality systems for runways, taxiways and aprons.
MARKING PRODUCTS & SYSTEMS FROM GERMANY S LEADING MANUFACTURER AIRPORT MARKINGS Markings on airports are a very economical contribution to the safety and orientation on airports, not only for planes on taxiways and runways but also for ground traffic vehicles. RETROREFLECTION: Our systems offer excellent retroreflection and night visibility on dry and wet surfaces due to innovative and clean SWARCO glass s (various particle sizes, low and high index). INNOVATION - MORE CONTRAST: Coloured granular glass can be added to our marking systems as needed to adjust the shade of colour. The resulting marking symbols and lines appear much more vivid and rich in contrast. DURABILITY: Our products have been successfully tested by independent bodies for resistance against fuels, deicers, engine oils and hydraulic fluids and excel in their resistance to kerosene. ABRASION RESISTANCE: By choosing the right solutions from our wide range of products, complemented by various glass s, excellent functionality and abrasion resistance of marking systems on airfields and runways, taxiways and aprons is guaranteed. SURFACE BONDING: Apart from their stipulated product-specific characteristics, markings need to have sufficient adherence to the surface to avoid engine ingestion of loose marking material. The right choice for an optimum and economical marking system for the different areas depends on airport specifications and other prerequisites. CERTIFIED: Our marking systems have been tested and approved by the German Federal Institute for Material Research and Testing in regard to colour standards according to DIN 5033, assessment according to ICAO Annex 14 Aerodromes and STANAG 3711. IN ADDITION TO OUR AIRPORT MARKINGS WE OFFER A WIDE RANGE OF PRODUCTS FOR... n road marking n markings for car parks n the marking of safety areas and safety guidance systems in repair shops and aircraft hangars
MARKING SYSTEMS FOR AIRPORTS Our marking systems are made from well-proven, high-quality raw materials and use sophisticated formulations. They ensure best-possible daytime visibility and optimum embedding of drop-on materials. PRODUCT GROUP LAYER THICKNESS CHARACTERISTICS APPLICATION RECOMMENDATIONS 1-C HIGH SOLID PAINT LIMBOROUTE K828F wet film thickness 0.4 mm; 0.7 mm 0.6 mm; 0.7 mm + cost-efficient + good day and night visibility low wear resistance Well suited for runways and areas where tyre particles have to be removed and markings have to be frequently renewed DISPERSIONS LIMBOROUTE LW48F wet film thickness 0.3 mm; 0.4 mm 0.6 mm + environmentally friendly + reduced emissions respect WOT low wear resistance Well suited for runways and areas where tyre particles have to be removed and markings are frequently renewed 2-C HIGH SOLID PAINT LIMBOROUTE 2-K K809F wet film thickness 0.3 mm; 0.4 mm 0.6 mm + good wear resistance and night visibility + good adhesion on damp, mineral substrates longer drying time Well suited for taxiways and permanent markings on aprons; Application possible until autumn on permanently damp substrates COLD SPRAY PLASTIC LIMBOPLAST KSP 120F dry film thickness 0.3 mm; 0.4 mm 0.6 mm + economical + good day and night visibility + good wear resistance + quickly trafficable Well suited for taxiways and permanent markings on aprons; for heavier traffic load (aircraft and land-based vehicles)
Road Marking Systems GLASS BEAD BLENDS FROM SWARCO SWARCO s innovative glass bead mixes with low and high index beads excel through excellent reflection of aircraft landing lights. Very good visibility at night and in foggy conditions is achieved if type II glass beads are used for markings on airfields and aprons. PRODUCT GROUP COMPONENTS CHARACTERISTICS APPLICATION RECOMMENDATIONS AIRPORT BEAD 2002 TYPE I - MEGALUX-BEADS - high index glass beads plus9beads - 25% anti-skid aggregates - particle sizes 106-850 µ - reflectivity value approx. 400 mcd - refractive index 1.5/1.9 - no night visibility in wet 0.3 0.4 mm AIRPORT BEAD 2007 TYPE I - 50% SolidPlus glass beads Type A - 30% anti-skid aggregates - particle sizes 250-850 µ - reflectivity value approx. 450 500 mcd - refractive index 1.5 Type A - longer durability - no night visibility in wet 0.3 0.4 mm PLUS9BEADS high index glass beads American standard TT-B- 1325 D TYPE III - plus9beads crystal clear, transparent microspheres, directly from the glass melt - particle sizes 300-850 µ - reflectictivy value approx. 800 1000 mcd - refractive index 1.9 - with highly reflective properties 0.3 0.4 mm SWARCO No.1 BEADS AIRPORT BEAD 2010 TYPE II - MEGALUX-BEADS - high index glass beads plus9beads - 25% anti-skid aggregates - particle sizes 212-1000 µ - reflectivity value approx. 450 mcd - refractive index 1.5 /1.9 - night visibility in wet 0.4 0.7 mm SWARCO No.1 BEADS AIRPORT BEAD TYPE II COLOURED T14 GG30 - SolidPlus glass beads - high index glass beads plus9beads - coloured anti-skid aggregates - particle sizes 212-1000 µ - refractive index 1.5 / 1.9 - coloured glass granulate as anti-skid aggregates in RAL colours 3020; 5015; 1023; 6024; 5017 - night visibility in wet 0.4 0.7 mm - high colour contrast A large number of different glass s, with and without anti-skid aggregates, that form a system in combination with marking materials is our contribution to innovative and efficient airport marking systems, which can be selected to optimally suit your particular needs. Get information about our highlight: coloured glass granulate used as anti-skid aggregate replacement for white cristobalite, for vivid and high-contrast coloured markings.
SWARCO LIMBURGER LACKFABRIK GmbH has long-standing experience and specialist expertise in the development and production of liquid road marking materials and systems. As market leader in Germany, our primary market, and with one of Europe s most modern paint factories we are a competent partner for road marking contractors and road administrations. We are proud of successful business relationships with partners in over 30 countries. Our quality and environmental management is certified according to ISO 9001:2008 and DIN EN ISO 14001:2009. Our accredited apprenticeship programme, awarded by Germany s Federal Employment Agency, has been focusing on the training and development of our junior staff in all corporate areas for years. This is a cornerstone in ensuring the success of our company also in the future. SWARCO LIMBURGER LACKFABRIK GmbH is a company of the international SWARCO Group which offers the complete range of products, systems, services and turnkey solutions for road marking, signage, traffic signalling and traffic management. SWARCO is the first choice when it comes to designing the growing mobility needs of society in an innovative, environmentally sound and safe manner. Talk to us first. SWARCO LIMBURGER LACKFABRIK GmbH Robert-Bosch-Straße 17 D-65582 Diez, Deutschland T. +49-6432-9184-0 F. +49-6432-9184-18 E. info.limburgerlackfabrik@swarco.com www.swarco.com/limburgerlackfabrik Your local contact: SWARCO LIMBURGER LACKFABRIK GmbH. Specifications are subject to change without further notice.