Client Project name Order# Type Qty FEATURES AND BENEFITS Physical : Low copper content extruded aluminum housing Available in 1, 2, or 4 sections Electro-statically applied polyester powder coat finish Aluminum end caps Stainless steel hardware Clear acrylic lens Asymmetric wallwash, 1 x 1, 1 x 6, x 6 or 6 x 6 optics Interior applications only Performance : Dynamic Warm variable color temperature: 12 LEDs/ft (4x 2200K, 4x 2700K, 4x 000K) Dynamic White variable color temperature: 12 LEDs/ft (4x 2700K, 4x 4000K, 4x 6500K) Lumen maintenance L70 @ 25 C - 120,000 hrs Resolution per foot or per fixture (configured with LumenID V software & RDM) Operating temperatures: -25 C to 5 C [-1F to 122F] Electrical : Line voltage luminaire for 100 to 277 volts Power and data in 1 cable (#18-5) Up to 112 feet with 1 power/data feed 17.25W/ft DMX/RDM enabled CERTIFICADO No.05884, 05885 RETILAP Minimum 1 " 4 ETE spacing [7mm] 6, 48 12, 24, [14mm, 619mm, 924mm, 1229mm] " [76mm] TOP VIEW 2 4 " [70mm] 2 [56mm] FRONT VIEW 2 1 [52mm] SIDE VIEW 1/8 Consult
ASYMMETRIC WALLWASH OPTIC FEEDING SIDE DETAIL Wall side Wall side INPUT WWLF Asymmetric Wallwash Optic, Left Feed WWRF Asymmetric Wallwash Optic, Right Feed INPUT TOP VIEW Always position frosted side toward the wall *Fixture s feeding side is based on uplight installations. Feeding sides are reversed when fixture is used in a downlight application. Recommended setback from wall is 1/10 of the wall height. Example: 2ft setback for a 20ft wall. FRONT VIEW RIGHT SIDE VIEW (Fixture pointing upwards) 2/8 Consult
MOUNTING OPTIONS Surface Mount SAM Slim Adjustable Mounting UMP Fixed Mounting 1 [mm] R 1 [4mm] 1 4 " [8mm] 2 1 [71mm] SAM Mounting Hole Pattern Wall Mount UMAS Universal Adjustable Mounting 18 9 /8 /4 [19mm] 2 7/8 [7mm] 1/2 [89mm] /16 [5mm] 75 WAM2 Adjustable Wall Mounting 2" -75 2X 9/2 THRU ALL UMP Mounting Hole Pattern WAM6 Adjustable Extended Arm Mounting 6" 12 /8 /4 [19mm] /8 2 1/2 [64mm] -12 1 /4 [45mm] 12 2X 9/2 THRU ALL WAM12 Adjustable Extended Arm Mounting 12" UMAS Mounting Hole Pattern -12 12 1 1/16 [27mm] /8 WAM18 Adjustable Extended Arm Mounting 18" 2 1/2 [64mm] -12 2X 1/4 THRU ALL 1 /4 [45mm] 0 1 7 4 1 4 " [5mm][108mm][187mm] 1 19 [40mm] [492mm] WAM Mounting Hole Pattern /8 Consult
LOUVER ACCESSORY INSTALLATION DETAIL Not suitable for asymmetric wallwash optic TOP VIEW Blade spacing 1" [25mm] 12 7 7 7 ", 24 ", 6 7 ", 48 16 16 16 [16mm,621mm, 926mm, 120mm] " [76mm] Blade depth 7 [11mm] 4 " [19mm] 2 [60mm] [81mm] FRONT VIEW SIDE VIEW LOGiRD Radial Louver for Lumenfacade Interior (see page 5 for ordering code) 4/8 Consult
ACCESSORIES Order separately Control Systems: Control Boxes: LTO2 LCU LID LTN CBX Lumentouch is a wall mount DMX 512 controller keypad. Lumencue is a USB / mini SD DMX 512 controller. LumenID is a diagnostic and addressing DMX 512 controller. It must be specifi ed on all DMX applications. Refer to LID specifi cation sheet for details. Lumentone is a simple pre-programmed DMX 512 controller with a push button rotary dial and live feedback. DMX/RDM control box. Up to six power and data outputs to fi xtures or fi xture runs. Ethernet enabled option. Refer to CBX specifi cation sheet for details. Leader Cable : LOGiLCD Leader Cable for Lumenfacade interior. Please add desired cable length : 10, 25 or 50 feet [m, 7.6m or 15.2m] standard lengths Sealing endcap is mandatory for any unused connector. (1) included with every leader cable Jumper Cable : LOGiJCD Jumper Cable for Lumenfacade interior. Please add desired cable length : 1, 2, 4, 8, 10, 15 or 20 feet [0.m, 0.6m, 1.2m, 2.4m, m, 4.5m or 6m] standard lengths Radial Louver : Not suitable for asymmetric wallwash optic LOGiRD - Radial louver for Lumenfacade Interior. Louver blade depth: 7/16 [11mm]; louver blade spacing: 1 [25mm] 1. Please specify desired nominal length: 1, 2, or 4. 2. Please specify fi nish as SI - Silver SandText, BK - Black SandText or WH - White (Custom color available on request, please specify as CC together with RAL color : ) 5/8 Consult
RESOLUTION DETAILS Fixture resolution can be configured on-site within the LumenID V software. A DMX/RDM enabled CBX is required. Resolution per foot: each foot is addressed independently DMX ADDRESSES: 1,2, (color 1) 4,5,6 (color 2) 7,8,9 (color ) 10,11,12 (color 4) LOGi 48 inches 1,14,15 (color 5) 16,17,18 (color 6) LOGi 48 inches 19,20,21 (color 7) 22,2,24 (color 8) Resolution per fixture: each fixture is addressed independently DMX ADDRESSES: 1,2, (color 1) LOGi 48 inches 4,5,6 (color 2) LOGi 48 inches 6/8 Consult
TYPICAL WIRING DIAGRAMS Star Layout (DMX/RDM) American Color Code CE Color Code USE Green Yellow/Green Ground Black Brown Live 100-277V White Blue Neutral Red/Purple Black 0-10V / Data + Orange Grey 0-10V / Data - LOGiLCD #16-5 100-277V Data input CBX-ST Maximum run length by 15A circuit Cable length/voltage 120V 240V 277V 10ft leader cable 50ft leader cable 78ft 100ft 112ft 68ft 80ft 88ft *Up to 170 individually addressable 1 foot sections per DMX/RDM run. *Maximum run length calculations are typically based on 4ft fixtures. Consult factory for specific applications. Data input Lumentouch 2.0 100-240V Daisy Chain Layout (DMX/RDM) Lumentouch 2.0 LOGiLCD #16-5 CBX-DS 100-240V Data input 100-277V CBX-DS 100-277V 7/8 Consult
HOW TO ORDER LOGi DMX/RDM 1 2 4 5 6 7 8 1 6 Housing: Mounting Option: 2 LOGi - Lumenfacade interior Voltage: 100-100 volts 120-120 volts 208-208 volts 220-220 volts 240-240 volts 277-277 volts 7 SAM - Slim Adjustable Mounting UMP - Fixed Mounting UMAS - Universal Adjustable Mounting WAM2 - Adjustable Wall Mounting 2 WAM6 - Adjustable Extended Arm Mounting 6 WAM12 - Adjustable Extended Arm Mounting 12 WAM18 - Adjustable Extended Arm Mounting 18 Finish: Length: 12-12 /8 inches (14mm) (0.95 kg/2.1 lbs) 24-24 /8 inches (619mm) (1.68 kg/.7 lbs) 6-6 /8 inches (924mm) (2.41 kg/5. lbs) 48-48 /8 inches (1229mm) (.08 kg/6.8 lbs) 8 SI - Silver SandText BK - Black SandText WH - White CC - Custom (please specify RAL color) 4 Control: Colors and Color temperatures: DWW - Dynamic warm white color temperature ranging from 2200K to 000K. DWH - Dynamic white color temperature ranging from 2700K to 6500K. DMX/RDM - DMX/RDM enabled Fixtures come pre-addressed by fixture ( DMX channels per fixture). 5 Optics: WWLF - Asymmetric Wallwash optic, left feed* WWRF - Asymmetric Wallwash optic, right feed* 10x10-1 x 1** 10x60-1 x 6 0x60 - x 6 60x60-6 x 6 *Available September 2015. Right feeding side is standard unless otherwise specified. **For best results, we recommend a 6-inch (15cm) setback from surface. Contact factory for application support. 8/8 Consult