COMPACT POWER TWIN RELAY POLE x 2 3A (Dual relay) (FOR AUTOMOTIVE APPLICATIONS) FBR2, 22 SERIES FEATURES DISCONTINUED (2) Two independent relays mounted in a single package Miniature size (4% of the volume of the FBR6 relays) High current contact capacity (carrying current: 3 A/ minutes, 2 A/ hour) High to vibration and shock Improved heat and extended operating range Two contact gap options (FBR:.3 mm, FBR:.6 mm) Two types of contact materials ORDERING INFORMATION FBR2 N D2 W ** [Example] (a) (b) (c) (d) (e) (a) Series Name FBR2 : Standard type (contact gap.3 mm) FBR22 : Wider contact gap type (contact gap.6 mm) (b) Enclosure N : Plastic sealed type (c) Nominal Voltage D6 : 6 VDC D9 : 9 VDC D : VDC D2 : 2 VDC (d) Contact Material W : Silver-tin oxide indium (high power type) (e) Custom Designation To be assigned custom specification
FBR2, 22 SERIES SPECIFICATIONS Item Contact Arrangement form C 2 (SPDT 2) Material Voltage Drop (Resistance) Rating Maximum Carrying Current* Max. Inrush Current (Reference) Max. Switching Current (Reference) Min. Switching Load* 2 (Reference) Silver-tin oxide indium (high power type) Maximum mv (at A 2 VDC) 4 VDC 2 A (locked motor load) 3 A/ minutes, 3 A/ hour (2 C, % rated coil voltage) 6 A 3 A 6 VDC A 6 VDC Coil Operating Temperature C to + 8 C (no frost) Storage Temperature C to + C (no frost) Time Value Operate (at nominal voltage) Maximum ms Release (at nominal voltage) Maximum ms Life Mechanical 7 operations minimum Electrical 2 operations minimum 4 VDC 2 A (locked motor load) Specifications W contact DISCONTINUED (2) Other Vibration Resistance to Hz (double amplitude of. mm) Shock Misoperation m/s 2 Resistance Endurance, m/s 2 Weight Approximately 3 g * Need to consider the head from PCB when max. current is more than A. *2 Values when switching a resistive load at normal room temperature and humidity, and in a clean environment. The minimum switching load varies with the switching frequency and operating environment. COIL DATA CHART. FBR2 SERIES MODEL W contact Nominal voltage Coil (±%) (at C) Must operate voltage* Thermal FBR2ND6-W 6 VDC 6 Ω FBR2ND9-W 9 VDC 3 Ω FBR2ND-W VDC 8 Ω FBR2ND2-W 2 VDC 2 Ω * Pulse drive 3.6 VDC (at C) 4. VDC (at 8 C).4 VDC (at C) 6.8 VDC (at 8 C) 6.3 VDC (at C) 7.9 VDC (at 8 C) 7.3 VDC (at C) 9.2 VDC (at 8 C) 73 C/W 2
FBR2, 22 SERIES 2. FBR22 SERIES MODEL W contact Nominal voltage Coil (±%) (at C) Must operate voltage* Thermal FBR22ND6-W 6 VDC 4 Ω 3.6 VDC (at C) 4. VDC (at 8 C) FBR22ND9-W 9 VDC Ω FBR22ND-W VDC 3 Ω.4 VDC (at C) 6.8 VDC (at 8 C) 6.3 VDC (at C) 7.9 VDC (at 8 C) 6 C/W FBR22ND2-W 2 VDC 8 Ω 7.3 VDC (at C) 9.2 VDC (at 8 C) * Pulse drive SUITABLE APPLICATIONS Application Normal load current (2 VDC system) Description Recommended model (example) For 6 V or less motor load voltage For instantaneous V or more load voltage Power Windows Automatic Door Lock to 2 A forward and reverse FBR2N -W FBR22N -W 8 to 2 A forward and reverse FBR2N -W FBR22N -W Automatic Antenna 8 to 2 A (INRUSH) forward and reverse break 2 A maximum (motor-free) motor control FBR2N -W Intermittent Wipers (Front and Rear) to 3 A break 2 to 8 A (motor-free) forward only FBR2N -W FBR22N -W Tilt-Lock Wheel Power Seat Sunroof DISCONTINUED (2) A forward and reverse FBR2N -W FBR22N -W to 3 A forward and reverse FBR2N -W FBR22N -W to 3 A forward and reverse FBR2N -W FBR22N -W For the load condition where higher voltage would be encountered during contact break, FBR22 series with wider contact gap is recommended. 3
FBR2, 22 SERIES CHARACTERISTIC DATA. MAXIMUM BREAK CAPACITY 2. LIFE Contact switching current (A) 3 3 2 Locked motor load FBR2 FBR22 2 Resistive load FBR2 FBR22 Number of operations (x 4 )3 4 VDC Motor locked load Standard type (ÐW) High power type (ÐW) 2 3 3 Voltage between contacts (VDC) 2 3 3 Locked motor current (A) 3. LIFE TEST (EXAMPLE) DISCONTINUED (2) Test item Shift of pick-up and drop-out voltage 4 V DC- A Motor lock, operations minimum (FBR2 -W type) 8 Test circuit RL- RL-2 M 6 Initial PICK-UP DROP-OUT Current wave form sec (RL-) A A (RL-2) A Shift of contact Break Make (measured at 6 V- A) A.3 sec sec.3 sec Initial No. of operations (x 4 ) 4
FBR2, 22 SERIES Test item 4 V DC-2 A Motor lock, operations minimum (FBR2 -W type) Test circuit RL- Current wave form (RL-) 2 A A (RL-2) 2 A A.3 sec sec RL-2 sec M.3 sec Shift of pick-up and drop-out voltage % of rated coil voltage 8 6 Shift of contact Contact PICK-UP DROP-OUT Break Make No. of operations (x 4 ) No. of operations (x 4 ) (measured at 6 V- A) 4. COIL TEMPERATURE RISE. OPERATING COIL VOLTAGE RANGE (EXAMPLE) ( C) [ FBR2ND9-W ] [ FBR2ND2-W ] Coil temperature rise 8 6.8 W.6 W (3) carrying current : A applied coil power (2) carrying current : A applied coil power.8 W.6 W.8 W.6 W () carrying current : A applied coil power at C DISCONTINUED (2) Applied voltage to the coil NOTE : Intermittent coil operation is required in this region at A or more carrying current. (V) CONTINUOUSLY APPLICABLE COIL VOLTAGE RANGE 3 Applied time (minutes) 3 Operating temperature ( C)
FBR2, 22 SERIES 6. VIBRATION RESISTANCE CHARACTERISTICS (m/s 2 ) Acceleration Dual amplitude (mm)... Frequency : ~ Hz Acceleration : m/s 2 maximum Automotive electronic standard Vibration direction : see diagram Detection Level : chatter > µs Range where chattering occurs contact coil not energized on X-direction Z FBR2 Frequency (Hz) Y X 7. SHOCK RESISTANCE CHARACTERISTICS (m/s 2 ), Shock level 8 6 DISCONTINUED (2) X X2 Y Y2 Z Z2 Shock direction : contact (coil de-energized) : contact (coil energized) Shock application time : ms, half-sine wave Test material : coil, energized and de-energized Shock direction: see diagram Detection Level : chatter > µs Z2 Z Y2 FBR2 Y X2 X Distribution (%) REFERENCE DATA Distribution of operate and release voltage 8 FBR22 Operate n = Release 6 Distribution (%) Distribution of operate and release time FBR22 n = 8 Operate Release 6 Distribution (%) Distribution of contact FBR22 n = 8 6 3 6 7 8 Nominal voltage multiplying factor (%) 2 3 4 6 7 8 Time (ms) 3 6 7 8 Contact (mω) 6
FBR2, 22 SERIES DIMENSIONS Dimensions PC board mounting hole layout (BOTTOM VIEW) 24. +.3 22ND2-W F&T.. 9327 6.2 +.3 3. 4. +.4 (.8) Terminal No., 9.3 t x. W ( Contact) Terminal No.3, 8.3 t x. W (Coil) Terminal No.4.6 t x. W (common coil) Terminal No.2, 7.4 t x. W ( contact) Terminal No., 6.4 t x. W ( contact) 2. 7.6 (.6) 3 Unit: mm Ø.4 +. Ð. 6-Ø.3 +. Ð. 8 ±.. ±.. ±. ±. 9 4 3 9. Max. 6 Maximum.3 Max. 7 2 6 ±. ±. Schematic (BOTTOM VIEW) 3 ±. 7.6 ±. 2. ±. * TERMINAL 8 COM 9 4 COM 3 7 DISCONTINUED (2) 2 6 Tube carrier pieces/tube Unit: mm Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-, Higashigotanda 2-chome, Shinagawa-ku Tokyo 4 863, Japan Tel: (8-3) 449-7 Fax: (8-3) 449-2626 Email: promothq@fcl.fujitsu.com Web: www.fcl.fujitsu.com North and South America Fujitsu Components America, Inc. E. Caribbean Drive Sunnyvale, CA 989 U.S.A. Tel: (-8) 74-49 Fax: (-8) 74-497 Email: components@us.fujitsu.com Web: http://www.fujitsu.com/us/services/edevices/components/ Europe Fujitsu Components Europe B.V. Diamantlaan 2 232 WV Hoofddorp Netherlands Tel: (3-23) 69 Fax: (3-23) 69 Email: info@fceu.fujitsu.com Web: emea.fujitsu.com/components/ Asia Pacific Fujitsu Components Asia Ltd. 2E Pasir Panjang Road #- Citilink Warehouse Complex Singapore 829 Tel: (6) 637-86 Fax: (6) 6273-32 Email: fcal@fcal.fujitsu.com Web: http://www.fujitsu.com/sg/services/micro/components/ 8 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice. Rev. January 3, 8. 7