CES MOUNT SMS MOUNT EAS MOUNT PNS MOUNT LOUVER ITEM LIGHT SOURCE SPECIFICATION 6W/FT, 9W/FT, 12W/FT OPTICS COLORS RGB, RGBW, RGBWWA, RGB+W PERFORMANCE RGB - 48" FIXTURE FIXTURE WATTAGE (TOTAL WATTAGE) OPTICS LUMENS EFFICACY MAX CANDELA (CD / m 2 ) 9 (12.1W/FT) 12 1044 22 LM/W 5104 LUMEN MAINTENANCE 75,000 hrs L70 75,000 hrs L70 ELECTRICAL DC VOLTAGE 120V OR 277V POWER SUPPLY REMOTE POWER SUPPLY CONTROL DMX READY PHYSICAL HOUSING Aluminum extrusion with cast aluminum end caps, powder-coated finish DIMENSIONS H X W X L: 3" X 2-5/8 X 1, 24" / 36" / 48" CERTIFICATION LENS OPERATING TEMPERATURE RoHS COMPLIANT Clear extruded acrylic Optional White acrylic diffusing lens -20 C to 40 C ETL and cetl approved for Damp Location WARRANTY 5 YEAR LIMITED All MEDLEY products are tested to IES LM-79, LM-80 and ANSI C78.377A standards 6W & 9W RGB Tri-chromatic Superior color saturation Eliminates individual colored dots (red dot, green dot & blue dot) 6W RGB Low wattage RGB Ideal for exterior cove, wash or direct view applications 9W RGB Ideal for line of site architectural applications to enhance the wall/façade 15W RGBWWA Delivers the complete color spectrum by combining red, green, blue, cool white, warm white and amber The perfect choice when for a smooth algorithm and a full spectrum. 12W RGB + W Delivers 76 lumens per watt at 6 w/ft of white light for general lighting and 6 w/ft of Insight s RGB tri-chromatic chip. Ideal for coves and accent lighting and offers the specifier superior value in color changing applications. 1 of 6
MC PREFIX MC MEDLEY C SERIES WATTAGE WATTS /FT STEP 2 - POWER SUPPLY ORDERING INFORMATION CONTRA DAT POWER SUPPLIES (FOR 9W RGB & 12W RGBWWA) C1 / 100 / DAT / 120V (1)-100W POWER/DATA SUPPLY, 120V Due to remote power supply application variances, it is recommended to load the C1/100/DAT drivers at 80% of the wattage capacity. C1 / 100 / DAT / 277V (1)-100W POWER/DATA SUPPLY, 277V For specific and case by case requirements, please contact factory for assistance. CONTRA RGB POWER SUPPLIES (FOR 6W RGB & 12W RGB+A) C1 / 100 / RGB / 120V (1)-100W RGB POWER SUPPLY, 120V Due to remote power supply application variances, it is recommended to load the C1/100/RGB drivers at 80% of the wattage capacity. C1 / 100 / RGB / 277V (1)-100W RGB POWER SUPPLY, 277V For specific and case by case requirements, please contact factory for assistance. PL-120 PL-277 LED COLOR/ CCT OPTICS RGB (TRI-CHROMATIC) STEP 1 - FIXTURE ORDERING INFORMATION LIGHT DIRECTION U = Uplight 120V PLENUM RATED THERMAL PROTECTOR 277V PLENUM RATED THERMAL PROTECTOR MOUNTING FIXTURE LENGTH 6 RGB 100 =100 X 100 D = Downlight CES = Close End 9W RGB: Red, green & blue color changing. Must order with Contra-DAT remote power supply. See below. RGB (TRI-CHROMATIC) 9 RGB 12 =12 X 60 20 =20 X 60 100 =100 X 100 9W RGB: Red, green & blue color changing. Must order with Contra-DAT remote power supply. See below. RGB+W (TRI-CHROMATIC) 12 RGB+W 100 =100 X 100 12W RGB (tri-color) + W: Red, green, blue + 4000K white color changing (fixture control only). Must order with Contra-RGB remote power supply. See below. RGBWWA (DISCREET) 12 RGBWWA 18 =18 X 60 42 =42 X 60 100 =100 X 60 RGBWWA (discreet): Red, green, blue, 4000K white, 6500K white & amber color changing. Must order with Contra-DAT remote power supply. See below. SMS = Surface EAS = Extended Arm PNS-X = Pendant (X = Pendant Length) 1 24" 36" 48" VOLTAGE/ WIRING METHOD REM = Remote power supply CONTRA POWER SUPPLY S DESCRIPTION CONTROL S FINISH S DMXFX = DMX Fixture Resolution (1 power supply per fixture is required) Power suppy(s) must be ordered separately. DMXFT = DMX Foot By Foot Resolution See below. (DMXFT is not available with 6W RGB or 12W RGB+W) DMXSY = DMX System Resolution DMX Controls are required. Order separately Contact factory for Insight's Wireless Option All Color Changing products require a DMX programmer for proper mixing. Must order separately. One LPT is required for field re-addressing of factory DMX settings. See below. W = Semi-Gloss White BL = Semi-Gloss Black BR = Semi-Gloss Bronze N = Semi-Gloss Natural S = Semi-Gloss Satin CC = Custom Color Contact factory, additional charges will apply STEP 3 - DMX DISTRIBUTION & PROGRAMMING KIT - REQUIRED FOR INSTALLATIONS LPT CDS-A DESCRIPTION DMX PROGRAMMING TOOL: One LPT is required for field re-addressing of factory DMX settings. LV = Louver WL = Diffusing lens WL Lens is available with 100 optics only. WL Lens is not available with RGBWWA systems. DMX DISTRIBUTION KIT ONLY (4 OUTPUTS): CDS-A consists of four outputs. Each output accommodates up to 32 fixtures in INT/REM wiring methods and unlimted fixtures in ACV wiring method. Four terminators are included for use as required. STANDARD INTERIOR FINISHES SEMI-GLOSS WHITE SEMI-GLOSS BLACK SEMI-GLOSS BRONZE SEMI-GLOSS NATURAL SEMI-GLOSS SATIN Color Disclaimer Due to the many variations in monitors and browsers, color samples may appear different on different monitors. Computer monitors are not all calibrated equally and color reproduction on the Internet is not precise.please contact your local Insight Representative to obtain color chips for accurate colors. http:///agent-locator/ 2 of 6
SMS - SURFACE, REMOTE POWER SUPPLY 1-1/ 3-1/4" 4' Input Lead (no connector) Dim. B Max. Dim. B Min. Top View 55 100 1-1/ 2-3/4" 4' Input Lead (no connector) Top View 100 55 Fixture Length 1 24" 36" 48" 12-1/ 24-1/ 36-1/ 48-1/ Dim B Min / Max (adjustable brackets) 5-1/4" / 11" 19" / 23" 19" / 35" 29" / 47" CES - CLOSE END, REMOTE POWER SUPPLY Front View 1-1/ 45 87 2-1/ 1-3/4" Dim. B 4' Input Lead (no connector) Top View MOUNTING BRACKET DETAILS 1.08".50" 1.75" 1.00".28" Fixture Length 1 24" 36" 48" 12-1/ 24-1/ 36-1/ 48-1/ Dim. B 11-1/ 23-1/ 35-1/ 47-1/ 3 of 6
EAS - EXTENDED ARM, REMOTE POWER SUPPLY 1-1/ 2-1/ Dim. B 2-1/ 6-3/4" 5" Dia. Front View Dim. B 90 90 1 Input Lead (no connector) Fixture Length 1 24" 36" 48" 12-1/ 24-1/ 36-1/ 48-1/ Dim. B 13-1/4" 25-1/4" 37-1/4" 49-1/4" CANOPY S - EXTENDED ARM STANDARD 5" Round Low Profile Cat#: RLP5 5" Round High Profile Cat#: RHP5 EAS standard canopies are a 5" round, low profile canopy and painted to match fixture. Standard canopies are provided unless otherwise specified. Optional 5" Round High Profile canopy is painted to match fixture. 4 of 6
PNS - PENDANT, REMOTE POWER SUPPLY Dim. B Specify 9" - 48" 4" Dia. 1 Input Lead (no connector) 1-1/ Front View 90 90 Fixture Length 1 24" 36" 48" 12-1/ 24-1/ 36-1/ 48-1/ Dim. B 13-1/4" 25-1/4" 37-1/4" 49-1/4" CANOPY S - PENDANT STANDARD 4" Round Low Profile Cat#: RLP4 5" Round Low Profile Cat#: RLP5 5" Round High Profile Cat#: RHP5 4-1/ Square Cat#: SHP4.5 PNS standard canopies are a 4" round, low profile canopy and painted semi-gloss white. Standard canopies are provided unless otherwise specified. Optional canopies are painted semi-gloss white. 5 of 6
CONTRA1 - DAT OR RGB 2 1/4" 5" 7 1/ THERMAL PROTECTOR PLENUM RATED 14 1/ 12 7/8" SIDE VIEW 3 3/4" BACK VIEW FRONT VIEW ( PLENUM ) 6 of 6