0 eatures High duty sugar cube relay with 6A 77VAC, A 77VAC. Contact gap can be greater than.mm,.mm. Conforms to European photovoltaic standard IEC 609-. Coil holding can be reduced to 6%, %V of the nominal coil for saving energy. High performance PCB power relay for photovoltaic power generation systems (solar inverter), motor control, compressor control, home appliances. Type List Standard type Complies with RoHS-Directive 0/6/EU. Terminal Contact Insulation Contact Designation (provided with) style form system gap lux tight A.mm.mm 0A-AH--C 0BA-AH--C 0A-AH--C 0BA-AH--C High power type A.mm.mm 0HA-AH--C 0BHA-AH--C 0HA-AH--C 0BHA-AH--C Extremely high capacity type A.mm 0E-AH--C 0BE-AH--C Ordering Information 0 - A H - - C 4 6 7 8 9 0. 0 -- Basic series designation 6. H -- Contact material Ag alloy. Blank -- Standard type B -- With insulation barrier. Blank -- Standard type E H -- Extremely high capacity type (Only for.mm contact gap) -- High power type 4. Blank -- Standard type A -- Double pin type (not available with 0E version). A -- Single pole normally open 7. Blank -- Contact gap.mm -- Contact gap.mm 8. Blank -- Standard type -- Class 9. C -- lux tight V S -- Sealed type -- Sealed type washable 0. -- Coil (please refer to the coil rating data for the availability) 9
0 Contact Rating Standard type Inductive load 6A 40VAC, On s /Off 9s, at 7 C, 0K ops. A 40VAC, On s /Off 9s, at 8 C, 0K ops. 6A 40VAC, AC-7a, cosφ0.8, On 0.s / Off 0s, at 8 C, 0K ops. High power type Inductive load 6A 40VAC, On s /Off 9s, at 8 C, 0K ops. 6A 40VAC, AC-7a, cosφ0.8, On 0.s / Off 0s, at 8 C, 0K ops. Extremely high capacity type A 40VAC, On s /Off 9s, at 8 C, 0K ops. Making 6A, Carrying A, Breaking 6A / 40VAC, On s /Off 9s, at 8 C, 0K ops. Coil Rating (DC) or contact gap. mm current ±0 % at C ±0 % at C at C () at C at 8 C () at / holding 40 86 4 70 4 48 80 7 % of % of 0~ % of approx..67w / 0.W () Notes:() To energize relay properly apply 00%~0% nominal coil for 00ms. () Coil holding is 0~% of nominal after applying nominal for 00ms. or contact gap. mm current ±0 % at C ±0 % at C at C () at C at 8 C () at / holding 40 86 4 70 4 48 80 80 % of % of 0~ % of approx..67w / 0.W () Notes:() To energize relay properly apply 00%~0% nominal coil for 00ms. () Coil holding is 0~% of nominal after applying nominal for 00ms. Extremely high capacity type for contact gap. mm current ±0 % at C ±0 % at C at C () at C at 8 C () at / holding 4 7 06 80 % of % of ~6 % of approx..8w / 0.9W () Notes:() To energize relay properly apply 00%~0% nominal coil for 00ms. () Coil holding is ~6% of nominal after applying nominal for 00ms. 60
0 Specification Contact material Contact resistance () Operate time () Release time () Ag alloy 00m Max. (at A/6VDC by 4-wire resistance measurement) ms Max. 0ms Max. Vibration resistance Shock resistance Life expectancy Operating ambient temperature Operating extremes Damage limits Operating extremes Damage limits Mechanical 0 0Hz, amplitude.0 mm 0 0Hz, amplitude.0 mm 0G 00G 00,000 ops. 00,000 ops. (for 0E type) (frequency 9,000 ops./hr) -40 +8 C (no freezing) Weight Note:() Initial value. Operate and release time excluding contact bounce. () All tests are conducted under room temperature and room humidity. () Consider the heat of PCB is necessary, please check the actual condition of PCB. (4) Applying no diode to this relay. The life expectancy will be lower when a diode is used. To use a varistor (ZNR) could absorb the coil surge of relay that is recommended. () Do not use the relay exceeding the coil rating, contact rating and life expectancy, or this may cause the risk of overheating. (6) To assure optimum performance, avoid the relay from dropping, hitting, or other unnecessary shocks. (7) Do not switch the contacts without any load as the contact resistance may become increased rapidly. (8) Please contact Song Chuan for the detailed information. Insulation Data Insulation resistance () 00M Min. (DC 00V) Approx. g Dielectric strength () Insulation of IEC 680- Clearance / creepage distances insulation impulse withstand Pollution degree Over category Between open contact Between contact and coil Between coil to contact Between open contact 0V 00V 0 / 400V II : AC 00V, 0/60Hz min. : AC 00V, 0/60Hz min. : AC 4000V, 0/60Hz min. (for 0B series) : Basic,.mm /.mm : Double, Reinforce mm / mm (for 0B series) : Basic,.mm /.mm Compliant with European photovoltaic standard Contact gap Note:() Initial value..mm (VDE 06).mm (IEC 609 and VDE 06) 6
0 Safety Approval Certified UL / CUL VDE ile No. E8899 40080 Safety Approval Rating UL / CUL VDE 0 0H 0E 0 0H 0E A 77VAC 6A 77VAC A 77 VAC A 0VAC T8 6A 0VAC T8 A 0VAC T8 6A 77VAC 6A 0VAC T7 Note lux tight version is recommended in high temperature. If production includes a cleaning process and sealed type is selected, the vent-nib should be removed after the process is completed. Outline Dimensions 0, 0H 0A, 0HA. (0.8). (0.8) (0.09). 0. (0.00) (0.0). (0.08) 0. (0.0) (0.8). (0.09) 0. (0.0) 0. (0.0) 0.6 (0.8) 0.6 (0.8) 0. (0.0) 0.6 (0.8) 6 (0.60) 0B, 0BH 0BA, 0BHA 0. (0.0) 0. (0.0) 0.6 (0.8) 0.6 (0.8) 0. (0.0) 0.6 (0.8) (0.09) 6 (0.60). 0. 0. (0.00) (0.0) (0.0). (0.08). (0.09). (0.8) (0.09) 6 (0.60). 0. (0.00) (0.0). (0.08) 0. (0.0).. (0.8) (0.09). 0. 0. (0.00) (0.0) (0.09) (0.0) 6. (0.8) (0.60) (0.08).. (0.8) (0.09) 0E 0BE (0.079) 6 (0.60). (0047). (0.08) 0. 0.- (0.0 0.0). 0. (0.00 0.8). (0.8) 6 (0.60) (0.079). (0047). (0.08) 0. 0.- (0.0 0.0). 0. (0.00 0.8) TOLERANCE: LESS THAN: (0.09) ±0.(0.004) (0.97) ±0.(0.0) 0(0.787) ±0.(0.00) MORE THAN: 0(0.787) ±(0.09) 6
0 Wiring Diagram BOTTOM VIEW 0, 0H, 0E 0A, 0HA 0B, 0BH, 0BE 0BA, 0BHA PC Board Layout BOTTOM VIEW 0, 0H 0A, 0HA Ø.9 (0.07). (0.480) 4.4 (0.69) Ø.- (0.0) (0.47) Ø.9 (0.07). (0.480) 4.4 (0.69) (0.8) Ø.-4 (0.0) (0.47) 0B, 0BH 0BA, 0BHA Ø.9 (0.07) 8.9 (0.0) 4.4 (0.69) Ø.- (0.0) (0.47) Ø.9 (0.07) 8.9 (0.0) 4.4 (0.69) (0.8) (0.47) Ø.-4 (0.0) 0E Ø.- (0.0).8 (0.4)..0 (0.8 0.09) 0BE Ø.- (0.0) 0. (0.4)..0 (0.8 0.09)..7 (0.098 0.067) (0.47)..7 (0.098 0.067) (0.47) 6 (0.60) 6 (0.60) Engineering Data Coil (%) 0 0 00 80 60 40 0 00 90 80 70 60 0 0 Coil operating range DC (0A-A.67W) 6A 0A With coil 4% 0 40 60 A Without coil Ambient temperature( C) 80 00 All specifications subject to change. Please contact Song Chuan for update. 6