Performance Specifications

Similar documents
TX-500 Temperature Compensated Crystal Oscillator

VX-706 Voltage Controlled Crystal Oscillator

TX-700 Temperature Compensated Crystal Oscillator

VX-505 Voltage Controlled Crystal Oscillator Extended Temperature

VX-701 Voltage Controlled Crystal Oscillator

MX-600 Microprocessor Controlled Crystal Oscillator High Precision

MX-503 Microprocessor Controlled Crystal Oscillator High Precision

Performance Specifications

OX-200 Oven Controlled Crystal Oscillator

TX-707 Low g-sensitivity Temperature Compensated Crystal Oscillator

VS-504 Dual Frequency VCSO High Frequency

VS-507 Voltage Controlled SAW Oscillator

TX-705 Temperature Compensated Crystal Oscillator

TX-801 Temperature Compensated Crystal Oscillator

PS-701 SAW Oscillator

EX-421 Evacuated Miniature Crystal Oscillator

Performance Specifications

PX-421 Crystal Oscillator

OX-171 Oven Controlled Crystal Oscillator

VX-990 Voltage Controlled Crystal Oscillator Ultra Low Noise and G-Sensitivity

OX-221 Oven Controlled Crystal Oscillator

VX-500 Voltage Controlled Crystal Oscillator

MD-403 I2C InterfaceOven Controlled Crystal Oscillator

PX-990 Crystal Oscillator Ultra Low Noise and G-Sensitivity

VX-503 Voltage Controlled Crystal Oscillator

Performance Specifications. Parameter Min Typ Max Units Condition. ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm

PX-422 Hybrid TTL Clock Oscillator

OX-175 Ultra Low Noise Oven Controlled Crystal Oscillator

C MHz 52 MHz

VT-860 Temperature Compensated Crystal Oscillator

Typical Applications Base Stations Test Equipment Synthesizers. Frequency stabilities 1 [Standard]

C5310. Tight Stability. 1 MHz 700 MHz

C

MX-503 High Precision Microprocessor Controlled Crystal Oscillator

VT-800 Temperature Compensated Crystal Oscillator Previous Vectron Model VTC4

Performance Specifications. Frequency Stabilities Supply Voltage (Vs) ma ma. RF Output

VT-501 Temperature Compensated Crystal Oscillator Previous Vectron Model VTD3

VT-701 Temperature Compensated Crystal Oscillator Previous Vectron Model VTC2

Performance Specifications. Frequency Stabilities 1 ( MHz) -20 to +70 C -40 to +85 C -40 to +95 C Residual error compare to fit curve

Additional parameters Parameter Min Typ Max. Units Condition Weight 1 g

Performance Specifications. Frequency Stabilities 1 ( 10 & 20 MHz)

MHz. Performance Specifications

OX-400 / OX 401 Oven Controlled Crystal Oscillator

VC-827 Differential (LVPECL, LVDS) Crystal Oscillator

VTC2 Series Voltage Controlled Temperature Compensated Crystal Oscillator

VTC4 series Voltage Controlled Temperature Compensated Crystal Oscillator

VC-820 CMOS Crystal Oscillator

Note. Figure1. The Temperature Stability ranges of various oscillator types

VVC1 VVC2 Voltage Controlled Crystal Oscillator

VC-711 Differential (LVPECL, LVDS) Crystal Oscillator

VX-805 Voltage Controlled Crystal Oscillator

OX-204 at 10 MHz Ultra Low Phase Noise Oven Controlled Crystal Oscillator

VV-701 Voltage Controlled Crystal Oscillator Previous Vectron Model VVC1/VVC2

VCC4 series 1.8, 2.5, 3.3, 5.0 volt CMOS Oscillator

PX-570 High Temperature Crystal Oscillator

PARAMETER SYMBOL CONDITIONS VALUE UNIT

Description. Block Diagram. Complementary Output. Output. Crystal. Oscillator. E/D or NC

VC-801 CMOS Crystal Oscillator Previous Vectron Model VCC4

VX-705 Voltage Controlled Crystal Oscillator

VCC6-L/V 2.5 or 3.3 volt LVDS Oscillator

Reflow Process Compatible Low Phase Noise Build in PLL-Circuit

VCC M CMOS Crystal Oscillator

MX-041 Oven Controlled Crystal Oscillator

PX-702 PX-570 PX-420

HT RTCXO High Temperature Low Power Real Time Clock Crystal Oscillators

VS-800 Ultra-Low Jitter High Frequency VCSO

VC-708 VC-708. LVPECL, LVDS Crystal Oscillator Data Sheet Ultra Low Phase Noise. Description

MD-173 High Stability Coefficient Oscillator I C interface Oven Controlled Crystal Oscillator

OX-304 at 10 MHz Ultra Low Phase Noise Oven Controlled Crystal Oscillator

VS-708 Single Frequency VCSO

VCA1 series 3.3, 5.0 volt CMOS Oscillator

VX-703 Data Sheet VX-703. Voltage Controlled Crystal Oscillator Previous Vectron Model V-Type. Description. Features. Applications.

VS-701 High Shock Discrete Voltage Controlled SAW Oscillator

VS-751 VS-751. Dual Frequency VCSO. Description. Features. Applications. Block Diagram. Vcc COutput Output SAW 1 SAW 2. Vc FS Gnd

OX-043 Low g-sensitivity Oven Controlled Crystal Oscillator

OX-046 VHF low g-sensitivity Oven Controlled Crystal Oscillator

VCC6-Q/R Series 2.5 and 3.3 volt LVPECL Crystal Oscillator

VCC4 series 1.8, 2.5, 3.3, 5.0 volt CMOS Oscillator

VSS4 series 3.3 Volt Spread Spectrum CMOS Oscillator

HT-MM900A Military Temperature Oscillator

Description. Block Diagrams. Figure 1b. Crystal-Based Multiplier w/saw

MD-261 MD-261. Features. Applications. Block Diagram. GNSS (GPS and GLONASS) Disciplined Oscillator Module

VVC4 Voltage Controlled Crystal Oscillator

MV-9300A 1-80 MHz High Performance VCXO

Rakon Product Proposal

2.0 FREQUENCY CHARACTERISTICS Line Parameter Test Condition Value Unit 2.1 Nominal frequency range

SONET / SDH. Block Diagram. COutput Output XTAL HPLL. OE or NC. Figure 1 - Block Diagram

OX-175 Ultra Low Noise Oven Controlled Crystal Oscillator

Block Diagram. Figure 1. Functional Block Diagram

Description. Block Diagram. Complementary Output. Output. Crystal. Oscillator E/D

Description. Block Diagram LD (10) VMON (5) Phase Detector & LD (9) FIN 4 CFOUT 1 GND (3, 7, 11, 12) Figure 1. Functional block diagram

RFPT Specifications. SMD Low Acceleration Sensitivity TCXO / TCVCXO. Product description. Applications

ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL CONDITION VALUE UNIT

Typical Applications Satellite and Deep Space Radiation Tolerance Required Severe Environmental Conditions. 10 MHz 40 MHz 10, 20 MHz

Block Diagram. COutput Output XTAL HPLL. Vc OE Gnd. Figure 1 - Block Diagram

VS-500A Voltage Controlled Saw Oscillator

J-Type Voltage Controlled Crystal Oscillator

Rakon Product Proposal

Model 149 Stratum 3E, 9x14 mm OCXO

VT-841 VT-841. Temperature Compensated Crystal Oscillator. Description. Applications. Features. Block Diagram. Output V DD.

Transcription:

TX-502 Temperature Compensated Crystal Oscillator High Precision TX-502 Features High Precision TCXO OCXO Replacement OCXO Temperature Performance Low power consumption Tight Tolerances Frequency range 1 of 6.4-26 MHz Standard Frequencies : 10, 12.8, 19.2, 20, 26 MHz up to 40MHz on request 1 Performance Specifications Applications Base Station Test Equipment Femto Base Station Communication Equipment Digital Switching Frequency Stabilities 1 (Standard - 6.4 to 26 MHz Parameter Min Typical Max Units Condition vs. operating temperature range (referenced to +25 C Initial tolerance vs. supply voltage change vs. load change vs. aging / day vs. aging / year vs. aging / 10 years -280-140 -70-50 -0.5-1.0-3.0 +280 +140 0 +70 +50 +0.5 +1.0 +3.0-40 to +85 C -40 to +85 C -40 to + 85 C for some frequencies 1-20 to +70 C -20 to +70 C -20 to + 70 C for some frequencies 1 at time of shipment, nominal EFC V S ±5% static Load ±5% static Options 3 Page 1 of 5

Performance Specifications Supply Voltage (Vs Parameter Min Typical Max Units Condition Supply voltage (standard Current consumption 3.135 3.3 3.465 12 RF Output VDC ma @HCMOS Signal [standard] HCMOS Load 13.5 15 16.5 pf Signal Level (Vol 0.3 VDC with Vs=3.3V and 15pF Load Signal Level (Voh 2.6 with Vs=3.3V and 15pF Load Duty Cycle 40 60 % @ (Voh-Vol/2 Rise and Fall time 5 ns @15 pf 10 to 90 % Frequency Tuning (EFC 6.4 to 26 MHz Tuning Range Fixed TCXO; No adjust Tuning Range ±5.0 Linearity <10% Tuning Slope Positive Control Input Impedance 80 100 120 kohm Control Voltage Range 0.3 1.65 3.0 VDC with Vs=3.3V Additional Parameters Phase Noise 2-90 -117-137 -148-151 -152 10 Hz 100 Hz 1 khz 10 khz 100 khz 1 MHz Jitter 0.2 ps RMS @ 12 khz to 20 MHz Weight 8.0 g Processing & Packing Handling & Processing Note Absolute Maximum Ratings supply voltage (Vs 6.0 V with Vs=3.3 VDC Output Load 50 pf Operable Temperature Range -40 +85 C Storage Temperature Range -40 +90 C Option 5 @ 12.8 MHz HCMOS 3.3 V Page 2 of 5

Outline Drawing / Enclosure TX-502 Height H Pin Length L 5.9 NA Pin Connections 1 Control Voltage Input (Vc / N.C. 2 N.C. 3 Ground (Case 4 RF-Output 5 N.C. 6 Supply Voltage Input (Vs Dimensions in mm Page 3 of 5

Standard Shipping Method (TX-502 Enclosure Type Tape Width W (mm Quantity per meter Quantity per reel Dimension P G287 24 83,3 850 12 Recommended Reflow Profile Profile Feature Pb-Free Assembly/ Sn-Pb Assembly Profile Feature Page 4 of 5 Pb-Free Assembly/ Sn-Pb Assembly Average ramp-up rate (T L to T P 3 C/second max. Time 25 C to Peak Temperature 8 minutes max. Preheat -Temperature Min T Smin 150 C Time maintained above -Temperature Min T Smax -Time (min to max t S 200 C 60-180 seconds -Temperature (T L -Time (t L 217 C 60-150 seconds TSmax to TL -Ramp-up Rate 3 C/second max Time maintained above -Temperature (T L -Time (t L 217 C 60-150 seconds Time within 5 C of actual Peak Temperature (t P 20-40 seconds Peak Temperature (T P max 260 C Ramp-down Rate 6 C/ second max Note: All temperatures refer to topside of the package, measured on the package body surface.

Ordering Information TX - 502 0 - E A J - 107 0-10M0000000 Product Family TX: TCXO Package High PrecisionTCXO SMD version: 502 Frequency Frequency Control 0: No Tuning 1: > ±5.0 Height 0: 5.9 mm Supply Voltage E: 3.3V RF Output Code A: HCMOS Temperature Range J: -20 C to +70 C E: -40 C to +85 C Stability Code 287: ±280 147: ±140 107: ±100 708: ±70 508: ±50 Notes: 1. Contact factory for improved stabilities or additional product options. Not all options and codes are available at all frequencies. 2. Phase noise degrades with increasing output frequency. 3. Contact factory for availability. Unless other stated all values are valid at typical conditions for supply voltage, frequency control voltage, load, temperature (25 C. Subject to technical modification. USA: 267 Lowell Road, Suite 102 Hudson, NH 03051 Tel: 1.888.328.7661 Fax: 1.888.329.8328 For Additional Information, Please Contact Europe: Landstrasse, D-74924 Neckarbischofsheim, Germany Tel: +49 (0 7268.801.100 Fax: +49 (0 7268.801.282 Asia: 68 Yin Cheng Road(C, 22nd Floor One LuJiaZui Pudong, Shanghai 200120, China Tel: +86 21 6194 6886 Fax: +86 21 6194 6699 Disclaimer reserves the right to make changes to the product(s and or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s or information. Rev: 10/2013 Page 5 of 5