Thanks for shopping with Improvements! Slanted Shoe Shelves Item #512142 Note: Read these instructions carefully before assembling. Tools required: Philips screwdriver (not included). Find a clean, smooth area on which to work, such as a carpet, in order to avoid scratching the wood surfaces. Wait to dispose of the packing material until assembly is complete and all parts and hardware are accounted for. 0116 Slanted Shoe Shelves #512142 Current instructions at www.improvementscatalog.com 1-800-642-2112 Page 1 of 8
Parts List: A. Top Qty: 1 B. Left Side Qty: 1 C. Right Side Qty: 1 D. Base Qty: 1 E. Front Brace Qty: 1 F. Back Brace Qty: 1 G. Adjustable Shelf Qty: 2 H. Back Qty: 2 Hardware List: 1. Cam Bolt Qty: 12 2. Cam Lock Qty: 12 3. Long Screw (1¼ long) Qty: 2 4. Round-Head Screw ( 5 / 8 long) Qty: 20 5. Shelf Support Qty: 8 6. Plastic Tie Qty: 2 7. Bracket Qty: 4 8. Anchor Qty: 4 9. Anchor Screw ( 7 / 8 long) Qty: 4 10. Short Screw (½ long) Qty: 4 11. Cam Cover Qty: 4 12. Connector Qty: 2 13. Cam Tool Qty: 1 Slanted Shoe Shelves #512142 Current instructions at www.improvementscatalog.com 1-800-642-2112 Page 2 of 8
To use Cam Locks - 1. Insert Cam Bolt until snug 2. Set boards together 3. Insert Cam Lock 4. Turn Cam Lock clockwise (half a turn) Do not overtighten Note arrow direction If it won t turn halfway, back out the Cam Bolt ½ turn and try Cam Lock again. Assembly Tips Find a clean, smooth area on which to work, such as a carpet, in order to avoid scratching the parts. Lay out all parts and hardware on the floor or on a table in the order of their number or letter. This will familiarize you with the parts and also help you find a part when you re ready to assemble it. Usually there is a small sticker on the part with the designating letter or number that matches the letter or number in the instructions. If that sticker is missing, look at the drawing in the instruction parts list, and try to recognize the part by its shape or characteristics like holes or grooves. We have provided both text and a drawing in each step, so using both will help the most. Each step assembles only a few parts, so just take it one step at a time. Slanted Shoe Shelves #512142 Current instructions at www.improvementscatalog.com 1-800-642-2112 Page 3 of 8
To assemble: Step 1 Insert four Cam Bolts (1) into the holes of the Left/Right Side (B/C). Use Cam Bolts and Cam Locks (2) to secure the Base (D) to the Sides. 1 4 2 4 Step 2 Insert four Cam Bolts (1) into the holes of the Front Brace (E). Use Cam Bolts and Cam Locks (2) to secure the Front Brace to the Base and the Sides. Use two Long Screws (3) to attach the Back Brace (F) to the Base. 1 4 2 4 3 2 Slanted Shoe Shelves #512142 Current instructions at www.improvementscatalog.com 1-800-642-2112 Page 4 of 8
Step 3 Insert four Cam Bolts (1) into the holes of the Top. Use Cam Bolts and Cam Locks (2) to secure the Top to the Sides. Press Cam Covers (11) onto the Cams. 1 4 2 4 11 4 Step 4 Use 16 Round-Head Screws (4) to attach the Back (H) to the unit. If you are stacking another unit of the same width, use four Round-Head Screws (4) and two Connectors (12) to secure the units as shown. 4 16 Slanted Shoe Shelves #512142 Current instructions at www.improvementscatalog.com 1-800-642-2112 Page 5 of 8
Step 5 Insert eight Shelf Supports (5) in the holes of the Sides at the desired level. Step 6 Place the Adjustable Shelves (G) on the Shelf Supports. 5 8 Slanted Shoe Shelves #512142 Current instructions at www.improvementscatalog.com 1-800-642-2112 Page 6 of 8
Step 7 The next two steps show how to use the tip-resistant hardware to attach the unit to the wall. Use four Short Screws (10) to attach the two Brackets (7) to the Top. 7 2 10 4 Slanted Shoe Shelves #512142 Current instructions at www.improvementscatalog.com 1-800-642-2112 Page 7 of 8
Step 8 Place the unit in the desired location. Mark the wall for mounting the other Brackets (7), directly behind the Brackets on the unit. For an even stronger connection, locate the center of a stud in the wall and use a 1.5 long screw (not included). A Plastic Anchor (8) is not needed for screws secured in a stud. Make holes in the wall and insert the Plastic Anchors (8). Secure the Bracket to the wall using the Anchor Screws (9). Place the unit against the Brackets on the wall. Use the Plastic Ties (6) to connect each Bracket set. Warning: It is important to attach the unit to the wall with the tip-resistant hardware (included), to help prevent injury from accidental tipping. DANGER: Do not allow children to climb on this unit. Bracket on the wall Bracket on the cabinet 6 2 7 2 8 4 9 4 Slanted Shoe Shelves #512142 Current instructions at www.improvementscatalog.com 1-800-642-2112 Page 8 of 8