FOMA M702iG Mnul for Dt Communiction Dt Communictions... 1 Before Using... 2 Prepring for Dt Communiction... 3 Instlling the Communiction Configurtion Files (Drivers)... 4 Connecting the FOMA Hndset nd PC Using the FOMA USB Cle (Optionl)... 5 Checking the Communiction Configurtion Files (Drivers)... 6 Uninstlling the Communiction Configurtion Files (Drivers)... 7 Prepring for Communiction vi Bluetooth... <Dil-up Network Gtewy> 7 Configuring Communiction Settings Using FOMA PC Configurtion Softwre FOMA PC Configurtion Softwre... 9 Instlling the FOMA PC Configurtion Softwre... 9 Configuring Communiction Settings... 11 Strt Communicting... 15 W-TCP Settings... 16 Setting APN... 17 Uninstlling the FOMA PC Configurtion Softwre... 18 Configuring Communiction Settings without Using FOMA PC Configurtion Softwre Configuring Dil-up Network... 19 Communicting... 24 AT Commnds... 26 AT Commnd List... 27 Aout Mnul for Dt communiction This mnul explins the items required for mking dt communiction on the FOMA M702iG s well s how to instll "M702iG (M702iG Communiction Configurtion Files (Drivers))" nd "FOMA PC (FOMA PC configurtion Softwre)" inside the CD-ROM. Aout Windows XP Opertion This mnul explins the contents complint with Windows XP Service Pck 2. Some procedures nd displys in this mnul my differ depending on your operting environment.
Dt Communictions Connecting the FOMA hndset nd PC llows you to use three types of dt communictions (pcket communiction, 64K dt communiction nd dt trnsfer (OBEX)). Aville Dt Communictions from the FOMA Hndset Pcket Communiction Pcket communiction is communiction method whose chrges re sed on the mount of dt exchnged. It llows dt communiction t mximum speed of 384Kps for receiving nd 64Kps for sending. In order to perform pcket communiction, connect the FOMA hndset nd PC using FOMA USB Cle (optionl) or vi Bluetooth nd connect to n ccess point of DoCoMo's Internet connection service "moper U" or "moper", tht hndles the FOMA pcket communiction. Note tht the communiction fees my ecome high if you use pcket communiction to send/ receive dt. 64K Dt Communiction 64K dt communiction is communiction method whose chrges re sed on the time connected to the network. It llows dt communiction t speed of 64Kps. In order to perform 64k dt communiction, connect the FOMA hndset nd PC using FOMA USB Cle (optionl) or vi Bluetooth nd connect to n ccess point of DoCoMo's Internet connection service "moper U" or "moper", tht hndles the FOMA 64K dt communiction or n ccess point tht hndles ISDN synchronous 64K. Note tht the communiction fees my ecome high if you use 64K dt communiction to connect for long time. Dt Trnsfer (OBEX) Dt trnsfer is communiction method tht exchnges dt using the FOMA USB Cle, infrred, or Bluetooth. In order to trnsfer dt y connecting the FOMA hndset nd PC with the FOMA USB Cle, dt link softwre must e instlled on the PC. In order to trnsfer dt using infrred or Bluetooth, communiction device such s PC must e equipped with infrred or Bluetooth cpility. Connecting the FOMA Hndset nd PC, etc. The following connection methods re ville to connect the FOMA hndset to PC to perform dt communictions: Using the FOMA USB Cle (optionl) (USB Connection) Connecting the FOMA hndset to PC with the FOMA USB Cle llows you to use ll communiction methods (pcket communiction, 64K dt communiction nd dt trnsfer (OBEX)). The communiction setup files (drivers) must e instlled efore connecting with the FOMA USB Cle. P4 When using the USB connection, set the USB mode to "Communiction mode". P5 Using Bluetooth (Bluetooth Connection) Using Bluetooth llows you to use ll communiction methods (pcket communiction, 64K dt communiction nd dt trnsfer (OBEX)). Use stndrd Bluetooth modem or Bluetooth modem provided y Bluetooth device mnufcturer to connect vi Bluetooth. For instlltion nd configurtion of modem, contct the mnufcturer of your PC or Bluetooth device. Using Infrred Using infrred llows you to use the communiction method of dt trnsfer (OBEX). You cn exchnge dt with PC, etc. with infrred cpility. Precutions efore Use Internet Service Provider Fees Fees to n Internet service provider (ISP) my e required to connect to the Internet. These fees re in ddition to the FOMA service fees nd re pid to your ISP directly. For detiled informtion on connection fees, contct your ISP. You cn use "moper U" or "moper", DoCoMo's Internet connection service. A seprte suscription (fee-sed) is required to use "moper U". To use "moper", no seprte suscription is required, nd no monthly usge fee pplies. Setting the Internet Connection (Internet service providers, etc.) Pcket communiction nd 64K dt communiction use different ccess points. For pcket communiction, use n ccess point comptile with pcket communiction, nd for 64K dt communiction, use the FOMA 64K dt communiction or use n ccess point comptile with ISDN synchronous 64K. DoP ccess points cnnot e connected. 1 Continued on the next pge
Access points for PHS 64K/32K dt communiction for PIAFS, etc. cnnot e connected. User Authentiction to Access Networks Depending on the ccess point, user uthentiction (ID nd pssword) my e required to connect. If required, enter the ID nd pssword from the dil-up network. The ID nd pssword will e provided y the network dministrtor of your ISP or ccess point. For detils, contct the network dministrtor of your ISP or the ccess point. Required Conditions for Pcket nd 64K Dt Communictions The following conditions must e met to perform communictions using the FOMA hndset ( connection my not e estlished if trffic is hevy t the se sttion or if rdio signls re wek). The PC must hve n interfce for the FOMA USB Cle. To connect vi Bluetooth, the device such s PC must e comptile with Dil-Up Networking. Profile of Bluetooth stndrd Version 1.2 The FOMA hndset must e in FOMA service re. The ccess point must support FOMA pcket communiction for pcket communiction. The ccess point must support FOMA 64K dt communiction or ISDN synchronous 64K for 64K dt communiction. Dt Communiction Glossry APN (Access Point Nme) Identifies n ccess point (ISP or LAN) for pcket communiction. The Internet connection service for DoCoMo, "moper U" hs "moper.net" s its APN. cid (Context Identifier) A registrtion numer of n APN of pcket communiction to the FOMA hndset. The FOMA hndset cn contin up to 10 APNs using cid 1-10. DNS (Domin Nme System) The dtse system tht trnsltes domin nme ddress such s "nttdocomo.co.jp" into numericl IP ddress for PCs. OBEX (Oject Exchnge) A protocol for file trnsfer defined y IrDA (Infrred Dt Assocition). Dt such s Contcts, Schedule events, or imges cn e exchnged with devices tht hndle the OBEX protocol. QoS (Qulity of Service) Indictes the network service qulity. You cn specify conditions of dt communiction speed in the FOMA hndset configurtions (ctul communiction speed vries depending on the communiction conditions). W-TCP The TCP prmeter is used to get the full utiliztion of the TCP/IP trnsmission cpility for pcket communictions over the FOMA network. The TCP prmeter must e optimized to get the most out of the communiction cpility of the FOMA hndset. Administrtor Privileges Access rights tht llow ccess to ll functions on Windows XP or Windows 2000 system. A user without dministrtor privileges cnnot instll or uninstll drivers or FOMA PC Configurtion Softwre. Before Using Operting Environment The following operting environment is required for PC to use dt communiction: Item PC Min Unit Requirement PC-AT comptile mchine with CD- ROM cple drive USB port (in ccord with Universl Seril Bus Specifiction Rev1.1/2.0) Disply resolution of 800x600 dots, High Color (65,536 color) or higher recommended For Bluetooth connection -Dil-up Networking Profile comptile device tht complies with Bluetooth Stndrd Version 1.2 OS* 1 Windows XP, Windows 2000 (Jpnese version) Required Memory Hrd Disk Spce For windows XP, 128M ytes or more* 2 For windows 2000, 64M ytes or more* 2 Aville spce of 5M ytes or more* 2 *1: DoCoMo does not gurntee the opertion under the supported OS if it is chnged through upgrde. *2: Required memory or hrd disk spce my vry depending on the PC system configurtion. Depending on the operting environment, dt communiction my not e ville. DoCoMo does not respond to ny inquiries out the use nor gurntee proper opertion under operting environments other thn those descried in "Operting Environment". The FOMA hndset is not comptile with Remote Wkeup. The FOMA hndset does not support FAX communiction. 2
Required Devices To use dt communictions, the following re required in ddition to the FOMA hndset nd PC: FOMA USB Cle (optionl)* FOMA miniusb Conversion Adpter M01 (ccessory)* CD-ROM for FOMA M702iG (ccessory) *: For Bluetooth connection, the FOMA USB Cle nd FOMA mini USB Conversion Adpter M01 re not required. For USB connection, purchse the exclusive FOMA USB Cle. Commercilly ville USB cles hve the wrong shpe connectors nd cnnot e used. Prepring for Dt Communiction The flow for prepring for pcket communiction or 64K dt communiction is s follows: Communiction vi USB Connection Instll the communiction setup files (drivers) P4 Checking the USB mode setting of the FOMA hndset to "Communiction mode" P5 Communiction vi Bluetooth Connection Connect the FOMA hndset nd PC using Bluetooth P8 Connect the FOMA hndset nd PC using USB cle (optionl) P5 Checking fter instlltion P6 Checking the modem P8 The following settings re common for oth USB nd Bluetooth connections. Instll the FOMA PC configurtion softwre nd set up the ccess point P9 Set up the ccess point (for pcket communiction) nd dil-up network without using the FOMA PC configurtion softwre P19 Connect P15, P24 Dt Communiction Softwre included on the "CD-ROM for FOMA M702iG" M702iG communiction setup files (drivers) These files must e instlled on PC so tht communiction or file exchnge cn e performed fter the FOMA hndset nd PC re connected using the FOMA USB Cle. 3 Continued on the next pge
FOMA PC configurtion softwre This softwre is to e instlled on PC to quickly configure settings of dil-up connections, etc. tht re required to perform dt communiction. Instlling the Communiction Configurtion Files (Drivers) You need to instll the communiction configurtion files so tht the FOMA hndset cn e used from the PC efore connecting the FOMA hndset nd the PC vi USB connection for the first time. The communiction configurtion file is not required for Bluetooth connection. The communiction configurtion files instlling with the FOMA hndset not connected to PC. Be sure to instll the communiction configurtion files from user ccount with the dministrtor privileges. For settings nd opertions regrding PC dministrtor privileges, contct your PC mnufcturer or Microsoft Inc. Check tht no other softwre is running efore instlling the communiction configurtion files. Terminte ny running softwre efore instlling the files. d e f Click [ (Continue)] to continue the instlltion. The M702iG communiction configurtion file opertes in the sme wy s the softwre hs pssed the Windows logo uthentiction test. Click [] on the confirmtion screen Connect the FOMA hndset nd the PC Connecting P5 After the hndset is connected properly, the tskr of the PC displys popup messge " (New hrdwre found)" for few seconds. Select " (No, not this time)" y Click [ (Next)] Depending on your PC sttus or settings, this screen my not pper. In this cse, go to Step 7. Instlling to Windows XP Insert the CD-ROM for FOMA M702iG into PC c Click " (Strt)" y " (Select file nme nd run)" then enter " "<CD-ROM drive letter>: Drivers Setup.exe" in " (Nme)"field y Click [] Click [ (Instll)] Instlltion of the drivers egins. g Select " ( ) (Instll the softwre utomticlly (recommended))" y Click [ (Next)] If the screen to recommend the instlltion interruption is displyed 4 Continued on the next pge
h i If the screen to recommend the instlltion interruption is displyed Click [ (Continue)] to continue the instlltion. The M702iG communiction configurtion file opertes in the sme wy s the softwre hs pssed the Windows logo uthentiction test. Click [ (Finish)] Instll ll drivers of the other three types Instll ll drivers of three types performing Steps 6 to 9. After the instlltion completes, the tskr of the PC displys popup messge " (New hrdwre instlled nd redy)" for few seconds. Go to "Checking the Communiction Configurtion Files (Drivers)". P6 Instlling to Windows 2000 Insert the CD-ROM for FOMA M702iG into PC c Click " (Strt)" y " (Select file nme nd run)" then enter " "<CD-ROM drive letter>: Drivers Setup.exe" in " (Nme)"field y Click [] Click [ (Instll)] Instlltion of the drivers egins. e Connect the FOMA hndset nd the PC 4 types of drivers re utomticlly instlled in row. Connecting P5 If the screen to confirm the instlltion continution is displyed Click [ (Yes)] to continue the instlltion. The M702iG communiction configurtion file opertes in the sme wy s the softwre hs verified the Microsoft digitl signture. Go to "Checking the Communiction Configurtion Files (Drivers)". P6 Connecting the FOMA Hndset nd PC Using the FOMA USB Cle (Optionl) This section explins the steps to connect the FOMA hndset nd PC using the USB cle. USB Mode Setting Setting the USB Mode Set the USB mode setting of the FOMA hndset to "Communiction mode" c y (Connection) y (USB Mode Setting) h [Chnge] y "Communiction mode" y h [Select] d If the screen to confirm the instlltion continution is displyed Click [ (Yes)] to continue the instlltion. The M702iG communiction configurtion file opertes in the sme wy s the softwre hs verified the Microsoft digitl signture. Click [] on the confirmtion screen 5 Connecting the FOMA Hndset nd PC Using the FOMA USB Cle (Optionl) Open the cover of the externl connector nd plug the FOMA miniusb conversion dpter M01 (Accessory) There is 2mm-gp etween the hndset nd the FOMA miniusb conversion dpter. This is norml. Plug the FOMA USB Cle connector, with the lel up, stright into the FOMA miniusb conversion dpter Slide in the connector until it securely clicks into plce. Continued on the next pge
c Plug the USB connector of the FOMA USB Cle to USB connector on the PC Lel side is fced up Checking the Communiction Configurtion Files (Drivers) Check tht the M702iG communiction configurtion file hs een instlled correctly. USB connector Use the exclusive FOMA USB Cle to connect the FOMA hndset nd PC. A commercilly ville USB cle hs different connector shpe nd cnnot e connected to the FOMA miniusb conversion dpter M01. Do not use excessive force inserting the FOMA USB Cle or FOMA miniusb conversion dpter M01 connector. Connectors won't work unless they re inserted t the pproprite direction nd ngle. When connectors re inserted correctly, they cn e inserted smoothly without requiring force. If you cnnot insert connector properly, do not use excess force nd check the shpe nd direction of the connector. Unplugging While pressing the relese uttons of the externl connector of the FOMA USB Cle, pull the cle in horizontl position from the FOMA miniusb conversion dpter M01 If you pull it forcily, mlfunction my result. Pull out the FOMA miniusb conversion dpter M01 in horizontl position from the FOMA hndset If you pull it forcily, mlfunction my result. <Exmple: For Windows XP> Click " (Strt)" y " (Control Pnel)" nd click " (Performnce nd Mintennce)" y " (System)" c For Windows 2000 Click " (Strt)" y " (Settings)" y " (Control Pnel)", nd click " (System)" Click the " (Hrdwre)" t y Click [ (Device Mnger)] For Windows 2000 Click the [ (Device Mnger)] t Click device nme to view the instlled driver nme Check tht " (Port) (COM/LPT)", " (Modem)" nd "USB (Universl Seril Bus) (Controller)" hve drivers displyed. Relese utton Relese utton c Unplug the FOMA USB Cle from the PC Windows XP 6 Continued on the next pge
Device Port (COM/LPT) Modem USB (Universl Seril Bus) Controller Driver FOMA M702iG Commnd Port FOMA M702iG OBEX Port FOMA M702iG FOMA M702iG If the FOMA USB Cle (optionl) ws disconnected or the instlltion ws cncelled y pressing [ (Cncel)] on the PC screen while the M702iG communiction configurtion file ws eing instlled, the file ws not instlled successfully nd the driver nmes my not e verified on the " (Device Mnger)" screen. In this cse, uninstll then reinstll the M702iG communiction configurtion files. To view the FOMA hndset COM port numer The modem nme or COM port numer of the FOMA hndset my e required if you set up communiction without using the FOMA PC configurtion softwre. This section descries how to check the COM port numer on the Device Mnger screen. Connect the FOMA hndset nd the PC Connecting P5 Perform Step 1 nd 2 in "Checking the Communiction Configurtion Files (Drivers)" c Click " (Modem)" y Select the "FOMA M702iG" y From the menu r, click [ (Operte)] y [ (Properties)] y Click the " (Modem)" t The FOMA hndset COM port numer ppers on the right side of " (Port):". Uninstlling the Communiction Configurtion Files (Drivers) To uninstll the communiction configurtion files (drivers), perform the following steps: Uninstll the files fter disconnecting the FOMA hndset from the PC. Be sure to uninstll the communiction configurtion files from user ccount with the dministrtor privileges. For settings nd opertions regrding PC dministrtor privileges, contct your PC mnufcturer or Microsoft Inc. Verify tht no other softwre is running efore uninstlling the communiction configurtion files. Terminte ny running softwre efore uninstlling the files. <Exmple: For Windows XP> Insert the CD-ROM for FOMA M702iG into PC c d e Click " (Strt)" y " (Select file nme nd run)" then enter " "<CD-ROM drive letter>: Drivers M702iGUn.exe" in " (Nme)"field y Click [] Click [ (Uninstll)] Un-instlltion of the driver egins. Click [] on the confirmtion screen Click [ (Yes)] to restrt the PC The PC reoots nd un-instlltion completes. Dil-up Network Gtewy Prepring for Communiction vi Bluetooth This section descries preprtion for communiction y connecting the FOMA hndset nd the PC vi Bluetooth. 7
Mke the Device Registrtion of the FOMA Hndset nd PC After the FOMA hndset ecome serch redy, serch for the FOMA hndset from the PC, register the device, nd connect the FOMA hndset nd the PC vi Bluetooth. If you connect the FOMA hndset nd the PC fter registering the device, registering the device (Steps 1 to 4) re not necessry. For connecting the devices fter they re registered, refer to the instruction mnul tht cme with the PC or device such s the Bluetooth dpter tht is connected to the PC. (Connection) y (Bluetooth Link) y "Find Me" This screen does not open when Bluetooth on the FOMA hndset is turned on. In this cse, go to Step 3. h [Yes] Bluetooth on the FOMA hndset turns on nd ecomes serch redy. links t the top of the screen. While the device ecome serch redy, if no serching opertions were performed from the PC for out three minutes, the serch redy stte will e cncelled utomticlly. c d Serch nd register the Bluetooth device on the PC Select "FOMA M702iG" <checking the specifictions> from the found device nd perform steps to register it. The Device registrtion screen opens on the FOMA hndset when you strt the registering process. For serching nd registering devices, refer to the instruction mnul tht cme with the PC or the device such s Bluetooth dpter tht is connected to the PC. It is recommended tht you turn off Bluetooth devices round the PC other thn the FOMA hndset efore serching nd registering devices. Some instruction mnuls my use "Find" for "Serch" nd "Piring" for "Register". h [Yes] y Enter the psskey The Psskey uthentiction completion screen opens on the FOMA hndset fter the Bluetooth connection etween the FOMA hndset nd the PC is estlished. Go to "Checking the Registered Devices". P8 Checking the Registered Devices Check the settings of the Bluetooth devices registered to the FOMA hndset nd the PC to mke sure you re redy to perform dt communictions vi Bluetooth. For the device nme displyed on the FOMA hndset nd the modem nme displyed on the PC, refer to the instruction mnul of your PC or the device connected the PC, such s the Bluetooth dpter. Checking the Settings of Devices Registered to the FOMA Hndset Verify the connection method etween the FOMA hndset nd the device. Chnge if necessry. cy (Connection) y (Bluetooth Link) y "Device History" Bluetooth devices registered to the FOMA hndset re displyed. Select device ycy select "Access Settings" ycy check the settings in "Dilup Networking Gtewy" Select from the following s necessry: Alwys Ask The confirmtion is displyed ech time you connect. Automtic Connection is lwys permitted. Never The connection is denied nd communiction cnnot e performed. Just Once The confirmtion is displyed for the first connection. Lter ttempts will e rejected. Checking the Modem Check the COM port numer ssigned to the modem to set up dt communiction. <Exmple: For Windows XP> 8 Continued on the next pge
Click " (Strt)" y " (Control Pnel)" then click " (Performnce nd Mintennce)" y " (System)" c For Windows 2000 Click " (Strt)" y " (Settings)" y " (Control Pnel)", nd click " (System)" Click the " (Hrdwre)" t y Click [ (Device Mnger)] Click " (Modem)" y Select the modem nme y From the menu r, click [ (Operte)] y [ (Properties)] y Click the " (Modem)" t The FOMA hndset COM port numer ppers on the right side of " (Port):". FOMA PC Configurtion Softwre Vrious settings regrding communiction re required to perform pcket communiction or 64K dt communiction connecting the FOMA hndset nd PC. Using the FOMA PC configurtion softwre llows you to perform the following settings quickly: (Esy Settings) Follow the instructions to "Set up the dil-up connection for FOMA dt communiction" nd t the sme time "Configure W-TCP" utomticlly. W-TCP Settings Optimize the communiction settings on the PC efore using "FOMA pcket communiction". Communiction settings need to e optimized y W-TCP settings in order to get the most out of the communiction cpility. APN Settings Configure the ccess point (APN) settings required for pcket communiction. The regulr phone numer is not used to connect to the FOMA pcket communiction ccess point, unlike 64K dt communiction. Sve APN (Access Point Nme) for ech ccess point on the FOMA hndset in dvnce, then specify the registrtion numer (cid) in the ccess point numer field to connect. "moper.ne.jp",the ccess point of "moper", is sved in cid1 nd "moper.net", the ccess point of "moperu" is sved in cid3 y defult. Terminting Bluetooth Connection After dt communiction finished, terminte the Bluetooth connection etween the PC nd the FOMA hndset. Perform steps to disconnect the PC nd the FOMA hndset For disconnection steps, refer to the instruction mnul of your PC or the Bluetooth device dded to the PC. You cn configure settings for pcket communiction or 64K dt communiction without using the FOMA PC configurtion softwre. P19, P24 If the FOMA PC configurtion softwre version 3.0.1 or its older version (herefter old FOMA PC configurtion softwre) is instlled, uninstll the old FOMA PC configurtion softwre in dvnce. P11 Instlling the FOMA PC Configurtion Softwre Be sure to instll the FOMA PC configurtion softwre from user ccount with the dministrtor privileges. For settings nd opertions regrding PC dministrtor privileges, contct your PC mnufcturer or Microsoft Inc. 9 Continued on the next pge
Check tht no other softwre is running efore instlling the FOMA PC configurtion softwre. Terminte ny running softwre efore instlling the configurtion softwre. <Exmple: For Windows XP> Insert the included CD-ROM for FOMA M702iG into PC c Click " (Strt)" y " (Select file nme nd run)" then enter " "<CD-ROM drive letter>: FOMA_PCSET Setup.exe" in " (Nme)"field y Click [] Click [ (Next)] If messge indicting tht " (Old W-TCP configurtion softwre)", " (Old APN configurtion softwre)", or " (Old FOMA PC configurtion softwre)" is instlled ppers, uninstll the softwre referring to P9. f g Check the instlltion destintion folder nd click [ (Next)] To chnge the instlltion destintion Click [ (Browse)] to specify n instlltion destintion then click [ (Next)]. Check the nme of the " (Progrm folder)" field y Click [ (Next)] d Click [ (Yes)] to gree to the license greement Clicking [ (No)] cncels the instlltion nd the FOMA PC configurtion softwre will not e ville. e Checkmrk " (Reside in the tsk try)" y Click [ (Next)] After the instlltion, (W-TCP settings) resides in the PC tsk try. It is recommended tht you keep it in the tsk try ecuse it llows you to chnge or view the W-TCP settings quickly. The FOMA PC configurtion softwre cn e instlled even if " (Reside in the tsk try)" is set to. To plce the icon in the tsk try fter the initil instlltion, on the FOMA PC configurtion softwre opertion screen (P11), click " (Menu)" y " (Plce W-TCP settings in the tsk try)". h Click [ (Finish)] After the instlltion completes, the FOMA PC configurtion softwre lunches nd the opertion screen opens. Wrning or confirmtion screens tht open during the instlltion of FOMA PC configurtion softwre This section descries opertions if wrning or confirmtion opens during the instlltion. If wrning indicting tht the FOMA PC configurtion softwre hs lredy een instlled ppers The old version of FOMA PC configurtion softwre hs een instlled. Uninstll the old version of FOMA PC configurtion softwre from the " (Add or Remove Progrms)" (for Windows 2000, " (Add or Remove Applictions)", then instll the FOMA PC configurtion softwre. If wrning indicting tht n old version of W-TCP environment configurtion softwre hs een instlled ppers 10 Continued on the next pge
Uninstll the old version of W-TCP environment configurtion softwre from the " (Add or Remove Progrms)" (for Windows 2000, " (Add or Remove Applictions)", then instll the FOMA PC configurtion softwre. If wrning indicting tht n old version of FOMA dt communiction configurtion softwre hs een instlled ppers Click [] to uninstll the FOMA dt communiction configurtion softwre utomticlly. After the un-instlltion, the FOMA PC configurtion softwre instlltion resumes. If confirmtion indicting to cncel the wizrd ppers when clicking [ (Cncel)] or [ (No)] Click [ (Finish)] to finish the instlltion. If reinstlling, perform the instlltion steps from the eginning. Checking the FOMA PC Configurtion Softwre Version On the FOMA PC configurtion softwre opertion screen, click " (Menu)" y " (Version)" to open the version informtion screen. 64K dt communiction settings using " (Esy Settings)" P14 Optimizing nd chnging the trnsmission cpility of dt communiction using "W- TCP Settings" P16 APN settings for pcket communiction using "APN Settings" P17 <Exmple: For Windows XP> Click " (Strt)" y " (All Progrms)" y "FOMA PC (FOMA PC configurtion Softwre)" y "FOMA PC (FOMA PC configurtion Softwre)" The FOMA PC configurtion softwre lunches nd the opertion screen opens. For Windows 2000 Click " (Strt)" y " (Progrms)" y "FOMA PC (FOMA PC configurtion Softwre)" y "FOMA PC (FOMA PC configurtion Softwre)" Configuring Communiction Settings This section descries steps to set up pcket communiction/64k dt communiction using the FOMA PC configurtion softwre. Check tht the FOMA hndset nd the PC re connected properly efore configuring the settings. P5 Lunching the FOMA PC Configurtion Softwre Lunch the FOMA PC configurtion softwre instlled on the PC. The following cn e configured from the opertion screen when the FOMA PC configurtion softwre is lunched: Pcket communiction settings using " (Esy Settings)" P12 Specifying COM Port When performing dt communiction vi Bluetooth connection, you need to specify the COM port numer of the PC under " (Communiction Settings)" of the FOMA PC configurtion softwre. This opertion is usully not required for USB connection. Perform this opertion if you wnt to specify the COM port. Check the COM port ssigned to the FOMA hndset Checking the COM port P7, P8 From the FOMA PC configurtion softwre opertion screen, click " (Menu)" y " (Communiction Settings)" 11 Continued on the next pge
c d Select " (Specify COM port)" y Click the "COM:" field to set the COM port numer ssigned to the FOMA hndset A COM port numer cn e specified etween 1 nd 99. Click [] Setting completes. Setting Pcket Communiction Using Esy Settings Pcket communiction is communiction method whose chrges re sed on the mount of dt exchnged. It llows dt communiction t mximum speed of 384Kps for receiving nd 64Kps for sending. It is recommended tht you use "moper U" tht hndles rodnd connection options or interntionl roming to connect to the Internet using the FOMA hndset (seprte suscription is required). You cn perform only pcket communiction using interntionl roming. Note tht pcket communiction fees under interntionl roming differ from those in Jpn. If you wnt to connect to the Internet now, "moper" is convenient. This section descries the steps to set up USB connection s n exmple. d e Click [] The APN settings will e downloded from the FOMA hndset. Plese wit. For Bluetooth Connection The confirmtion my e displyed depending on the FOMA hndset connection settings. Press h [Accept] to connect. Enter connection nme in the " (Connection Nme)" field y Select [ (Connection Method)] ("PPP (PPP Connection)"/"IP (IP Connection)" y Select " (Show Cller ID)" y Click [ (Next)] The following hlf-pitch chrcters cnnot e entered in the " (Connection Nme)" field. /:?!<> " To connect to "moper U", select " (Connection Method)" to "IP (IP Connection)". When using in Jpn, you cn select ny " (Connection Method)". To connect to "moper", select "PPP (PPP Connection)". To connect to "moper U" or "moper", Cller ID must e sent. Do not select " (Hide Cller ID)". If using overses, select "NW (Follow the NW Service)" nd on the FOMA hndset, operte c y (Network Services) y "Cller ID Notifiction" y "Chnge Notifiction Setting" to set whether to show your Cller ID. For Bluetooth Connection Check tht the nme displyed under " (Modem Nme)" is correct y referring to the instruction mnul for your PC or the Bluetooth dpter connected to the PC. Using "moper U" or "moper" On the FOMA PC configurtion softwre screen, click [ (Esy Settings)] c Select " (Pcket Communiction)" nd click [ (Next)] Select " (Connect to moper U)" or " (Connect to moper)" y Click [ (Next)] If you select " (Connect to moper U)", screen to inquire whether you re suscrier to "moper U" ppers. Click [ (Yes)] if you re suscrier nd continue with the settings. 12 Continued on the next pge
f g h i Select ny users under " (Select permitted user)" nd click [ (Next)] To connect to "moper U" or "moper", the " (User Nme)" nd " (Pssword)" fields cn e left unfilled. Set " (Optimize)" to y click [ (Next)] If lredy optimized A conformtion to optimize does not pper. Go to Step 8. Check the settings y Click [ (Finish)] If " (Crete shortcut to dil-up on the desktop)" is set to, shortcut to the dil-up connection will e creted on the desktop. To chnge settings Click [ (Bck)]. Click [] Setting completes. If the optimiztion setting ws chnged You need to restrt the PC. Click " (Yes)" on the screen to reoot. Using Another Provider On the FOMA PC configurtion softwre screen, click [ (Esy Settings)] c d e Select " (Pcket Communiction)" nd click [ (Next)] Select " (Other)" nd click [ (Next)] Click [] The APN settings will e downloded from the FOMA hndset. Plese wit. For Bluetooth Connection The confirmtion my e displyed depending on the FOMA hndset connection settings. Press h [Accept] to connect. Enter connection nme in the " (Connection Nme)" field The following hlf-pitch chrcters cnnot e entered in the " (Connection Nme)" field. /:?!<> " Follow the instructions from your ISP to set the " (Connection Method)" nd Cller ID notifiction. f g h i j If using overses, select "NW (Follow the NW Service)" nd on the FOMA hndset, operte c y (Network Services) y "Cller ID Notifiction" y "Chnge Notifiction Setting" to set whether to show your Cller ID. For Bluetooth Connection Check tht the nme displyed under " (Modem Nme)" is correct y referring to the instruction mnul for your PC or the Bluetooth dpter connected to the PC. To set the IP ddress nd DNS If your ISP requires setting IP ddresses nd DNS, click [ (Advnced Informtion Settings)] nd set these items. Click [ (APN Settings)] Click [ (Add)] y Set up the APN y Click [] Set " (cid)" to 2 or 4-10. Click [] The " (APN Setting)" screen closes. Click [ (Next)] Set " (User Nme)" nd " (Pssword)" y Select ny users under " (Select permitted user)" y Click [ (Next)] Enter the user nme nd pssword provided y your ISP ccurtely pying ttention to upper or lower cse. 13 Continued on the next pge
k l m Set " (Optimize)" to y Click [ (Next)] If lredy optimized A conformtion to optimize does not pper. Go to Step 12. Check the settings y Click [ (Finish)] If " (Crete shortcut to dil-up on the desktop)" is set to, shortcut to the dil-up connection will e creted on the desktop. To chnge settings Click [ (Bck)]. Click [] Setting completes. If the optimiztion setting ws chnged You need to restrt the PC. Click " (Yes)" on the screen to reoot. Setting 64K Communiction Using Esy Settings 64K dt communiction is communiction method whose chrges re sed on the connection time. It llows mximum speed of 64Kps to trnsfer dt. It is recommended tht you use "moper U" tht hndles rodnd connection options or interntionl roming to connect to the Internet using the FOMA hndset (seprte suscription is required). You cn perform only pcket communiction using interntionl roming. Note tht pcket communiction fees under interntionl roming differ from those in Jpn. If you wnt to connect to the Internet now, "moper" is convenient. This section descries the steps to set up USB connection s n exmple. Using "moper U" or "moper" On the FOMA PC configurtion softwre screen, click [ (Esy Settings)] c Select " (64K Dt Communiction)" nd click [ (Next)] Select " (Connect to moper U)" or " (Connect to moper)" y Click [ (Next)] d e f g When selecting (Connect to moper U)" A screen to confirm whether you re suscrier to "moper U" ppers. Click [ (Yes)] if you re suscrier nd continue with the settings. Enter connection nme in the " (Connection Nme)" field y Select " (Show Cller ID)" y Click [ (Next)] The following hlf-pitch chrcters cnnot e entered in the " (Connection Nme)" field. /:?!<> " Select "FOMA M702iG" for the " (Select the modem)" field. To connect to "moper U" or "moper", Cller ID must e sent. Do not select " (Hide Cller ID)". For Bluetooth Connection Check tht the nme displyed under " (Modem Nme)" is correct y referring to the instruction mnul for your PC or the Bluetooth dpter connected to the PC. Select ny users under " (Select permitted user)" y Click [ (Next)] To connect to "moper U" or "moper", the " (User Nme)" nd " (Pssword)" fields cn e left unfilled. Check the settings y Click [ (Finish)] If " (Crete shortcut to dil-up on the desktop)" is set to, shortcut to the dil-up connection will e creted on the desktop. To chnge settings Click [ (Bck)]. Click [] Setting completes. 14
Using Another Provider On the FOMA PC configurtion softwre screen, click [ (Esy Settings)] c d Select " (64K Dt Communiction)" y Click [ (Next)] Select " (Other)" y Click [ (Next)] When selecting (Connect to moper U)" A screen to confirm whether you re suscrier to "moper U" ppers. Click [ (Yes)] if you re suscrier nd continue with the settings. Configure the communiction settings y Click [ (Next)] Perform the following to configure the communiction settings: Enter connection nme in the " (Connection Nme)" field. The following hlf-pitch chrcters cnnot e entered in the " (Connection Nme)" field. /:?!<> " - Select "FOMA M702iG" for the " (Select the modem)" field. - Enter the phone numer to dil your ISP in the " (Phone Numer)" field. Follow the instructions of your ISP to set the " (Connection Method)" nd Cller ID notifiction. If using overses, select "NW (Follow the NW Service)" nd on the FOMA hndset, operte c y (Network Services) y "Cller ID Notifiction" y "Chnge Notifiction Setting" to set whether to show your Cller ID. For Bluetooth Connection Check tht the nme displyed under " (Modem Nme)" is correct y referring to the instruction mnul for your PC or the Bluetooth dpter connected to the PC. To set IP ddresses nd DNS If your ISP requires setting IP ddresses nd DNS, click [ (Advnced Informtion Settings)] nd set these items. 15 e f g Set " (User Nme)" nd " (Pssword)" y Select ny users under " (Select permitted user)" y Click [ (Next)] Enter the user nme nd pssword provided y your ISP ccurtely pying ttention to upper or lower cse. Check the settings y Click [ (Finish)] If " (Crete shortcut to dil-up on the desktop)" is set to, shortcut to the dil-up connection will e creted on the desktop. To chnge settings Click [ (Bck)]. Click [] Setting completes. Strt Communicting This section descries steps to strt nd terminte communiction set up using the FOMA PC configurtion softwre. Use the sme FOMA hndset tht ws connected when you set the communiction settings. Using nother FOMA hndset requires the instlltion of the communiction configurtion file. Doule click the connection icon on the PC desktop If connection icon is not displyed on the desktop, perform the following steps: For Windows XP Click " (Strt)" y " (All progrms)" y " (Accessories)" y " (Communiction)" y " (Network connection)" y Doule-click the ccess point tht hs een set up Continued on the next pge
For Windows 2000 Click " (Strt)" y " (Progrms)" y " (Accessories)" y " (Communiction)" y " (Network nd dil-up connection)" y Doule-click the ccess point tht hs een set up Enter " (User Nme)" nd " (Pssword)" y Click [ (Dil)] The ccess point will e connected. To connect to "moper U" or "moper", the " (User Nme)" nd " (Pssword)" fields cn e left unfilled. W-TCP Settings "W-TCP configurtion softwre" is tool to set TCP prmeters in order to optimize the TCP/IP trnsmission cpility when pcket communiction is performed over the FOMA network. In order to get most out of the FOMA hndset communiction cpility, you need to optimize the communiction settings using this softwre. Optimiztion is not necessry if you selected " (Optimize)" when configuring the communiction settings using "Esy Settings". The communiction speed displyed on the PC my e different from the ctul communiction speed. Disconnecting Communiction Exiting the Internet rowser my not terminte the connection. Perform the following steps to terminte the connection securely. Click the dil-up icon in the tsk try of the PC Click [ (Disconnect)] The communiction will e terminted. For Windows XP You cn set/cncel optimiztion per dil-up connection. <Exmple: Optimizing> Strt the FOMA PC configurtion softwre y Click [ (W-TCP settings)] To operte from the tsk try of the PC Click. On the W-TCP settings screen, click [ (Optimize)] To cncel optimiztion On the W-TCP settings (dil-up) screen, click [ (System Settings)] y [ (Cncel Optimizing)] If lredy optimized, the W-TCP settings screen will not open. In this cse, go to Step 3. 16 Continued on the next pge
c Set to dil-up connection to optimize y Click [ (Execute)] d Set to dil-up connection to cncel optimizing. Follow the instructions on the messge to reoot the PC to enle the optimiztion The optimiztion of the system settings will ecome enled fter the PC reoots. Check tht the FOMA hndset nd the PC re connected properly efore configuring the settings. P5, P8 Strt the FOMA PC configurtion softwre y Click [ (APN settings)] c Click [] on the Downlod FOMA hndset settings screen The informtion on the APN tht hs een ccessed nd registered y the connected FOMA hndset will e red. Configure APN To set the connection method, click [ (Edit)] y [ (Advnced Settings)] nd select connection method. For Windows 2000 <Exmple: Optimizing> Strt the FOMA PC configurtion softwre y Click [ (W-TCP settings)] To operte from the tsk try of the PC Click. c On the W-TCP settings screen, click [ (Optimize)] To cncel optimiztion On the W-TCP settings screen, click [ (Cncel Optimiztion)] Follow the instructions on the messge to reoot the PC to enle the optimiztion The optimiztion of the system settings will ecome enled fter the PC reoots. Setting APN Set the ccess point (APN) for pcket communiction. Up to 10 APN cn e set, nd cid of 1 to 10 cn e ssigned. Use cid to specify the ccess point for pcket communiction. The defult cid1 is registered "moper.ne.jp" for APN of "moper" nd cid3 is registered "moper.net" for APN of "moper U", when you set cid, 2 or numer etween 4 nd 10. 17 Editing/Deleting/Adding n APN To edit registered APN Select n APN from the list y Click [ (Edit)] To delete registered APN Select APN from the list y Click [ (Delete)] APN's registered for cid 1 nd cid 3 cnnot e deleted (Even if you select numer (cid) 1 or 3 nd click [ (Delete)], it will not e deleted, nd numer (cid) 1 reverts to "moper.ne.jp" nd 3 reverts to "moper.net"). To dd n APN Click [ (Add)] Sving to File You cn mke ckup of sved APN settings on the FOMA hndset or sve APN settings tht re eing edited. Click " (File)" y " (Sve s)" or " (Sve)" Reding from File You cn re-edit the APN settings sved on the PC or write the settings to the FOMA hndset. Click " (File)" y " (Open)"
Writing APN Informtion to the FOMA Hndset You cn write the APN settings tht hve een written to the FOMA hndset, to the FOMA hndset. Click [ (Write settings to FOMA hndset)] The confirmtion to overwrite ppers. Click [ (Yes)] If your ISP provided IP nd DNS informtion, click [ (Set detiled informtion)] on the Dil-up for pcket communiction cretion screen, entered ny necessry informtion, nd click []. APN informtion is sved on the FOMA hndset. If you connect different FOMA hndset, sve the APN informtion gin. If you wnt to use the APN informtion sved on the PC, register the sme APN to the sme cid on the FOMA hndset. Reding APN Informtion from the FOMA Hndset You cn red the registered APN from the FOMA hndset on demnd. Click " (file)" y " (Downlod settings from FOMA hndset)" The Downlod FOMA hndset setting screen is displyed. Click [] Creting Dil-up Connection Write the dded or edited APN to the FOMA hndset nd set up dil-up connection. Select the dded or edited APN y Click [ (Crete dil-up connection)] A confirmtion to write to the FOMA hndset ppers. c d Click [ (Yes)] After the APN informtion ws written to the FOMA hndset, clicking [] opens the " (Crete dil-up connection for pcket communiction)" screen. Enter connection nme y Click [ (Account/ pssword setting)] For "moper U" or "moper", the fields cn e left unfilled. Set " (User)" nd " (Pssword)" y Select ny users under " (Select permitted user)" y Click [] A dil-up connection is creted. 18 Uninstlling the FOMA PC Configurtion Softwre Be sure to uninstll the FOMA PC configurtion softwre from user ccount with the dministrtor privileges. For settings nd opertions regrding PC dministrtor privileges, contct your PC mnufcturer or Microsoft Inc. <Exmple: For Windows XP> Terminte ny running softwre Terminte " (W-TCP configurtion softwre)" Right click in the tsk try of the PC nd click " (Exit)". Exit the FOMA PC Configurtion Softwre Click [ (Exit)] t the lower right corner of the screen. c Terminte ny running softwre c d Click [ (Strt)] y [ (Control Pnel)] y [ (Add or Remove Progrms)] For Windows 2000 Click [ (Strt)] y [ (Settings)] y [ (Control Pnel)] y [ (Add or Remove Applictions)] Select "NTT DoCoMo FOMA PC (NTT DoCoMo FOMA PC configurtion Softwre)" y Click [ (Delete)] For Windows 2000 Select "NTT DoCoMo FOMA PC (NTT DoCoMo FOMA PC configurtion Softwre)" y Click " (Chnge / Delete)" Check the progrm nme to remove nd click [ (Yes)] Continued on the next pge
e Click [ (Finish)] The un-instlltion of the FOMA PC configurtion softwre completes. If W-TCP settings hve een optimized The following screen is displyed. If you do not intend to perform dt communiction y connecting the FOMA hndset, click [ (Yes)] to cncel optimiztion. c Click " (Strt)" y " (All progrms)" y " (Accessories)" y " (Communiction)" y " (Hyper Terminl)" Hyper Terminl lunches. For Windows 2000 Click " (Strt)" y " (Progrms)" y " (Accessories)" y " (Communiction)" y " (Hyper Terminl)" Enter connection nme in the " (Nme)" field y Click [] Configuring Dil-up Network This section descries the steps to configure settings for pcket communiction or 64K dt communiction without using the FOMA PC configurtion softwre. Becuse there re mny common steps to set up pcket communiction nd 64K dt communiction, this section descries how to set up the connection for pcket communiction. The steps to set up 64K dt communiction, different steps, nd cutions re descried on Pge 25. Setting APN Set the ccess point (APN) for pcket communiction. Up to 10 APN's cn e set up nd they re mnged with cid's. Communiction softwre requires setting up n APN in order to enter AT commnds. This section descries the steps necessry for using "Hyper Terminl" tht comes with Windows. To set up 64K dt communiction connection, or to use "moper U" or "moper" s n ccess point for pcket communiction, these settings re not required. For APN's other thn "mopoer U" or "moper", contct your ISP. <Exmple: Setting up USB connection in Windows XP> Connect the FOMA hndset nd the PC Connecting P5 For Bluetooth Connection Connecting P7 d Enter non-existing phone numer (such s "0") in the " (Phone Numer)" field y Check tht "FOMA M702iG " is displyed for " (Connection Method)" y Click [] If there re similr modem nmes displyed in the " (Connection Method)" field, check the FOMA hndset modem nme. P8 For Bluetooth Connection Set " (Connection Method)" to the modem nme verified in "Checking the Modem" (P8). 19 Continued on the next pge
e f Click [ (Cncel)] on the Connection screen The Hyper Terminl entry screen opens. Enter the APN in the following formt y Press [Entry Formt] AT+CGDCONT=<cid>,"<PDP type>","<apn>" <cid>: Enter the registrtion numer (cid) of the ccess point (APN). Cid1 is registered "moper.ne.jp" nd cid3 is registered "moper.net" lredy, when you set cid, 2 or numer etween 4 nd 10. <PDP type>: Enter the PDP type of the APN in PPP or IP. <APN>: Enter the ccess point (APN). [] ppers fter the ccess point is set up. Enter ATE1 if the entered chrcters re not displyed. Setting Disply/Hide Cller ID You cn set to disply or hide Cller ID for pcket communiction using the *DGPIR AT commnd. To set up 64K dt communiction connection, this setting is not required. Perform Step 1 to 5 in "Setting APN" Hyper Terminl lunches nd the entry screen opens. Set whether to disply or hide Cller ID using the following formt ypress [Entry Formt] AT*DGPIR=<n> <n> : Set to 1 to hide Cller ID ("184" is dded when diling). Set to 2 to disply Cller ID ("186" is dded when diling). [] ppers fter Cller ID notifiction is set. To use "moper U" or "moper", set to 2 (disply Cller ID). Enter ATE1 if the entered chrcters re not displyed. g h To reset the APN settings of the specified cid Enter AT+CGDCONT=<cid>. To view the registered APN Enter AT+CGDCONT?. Click " (File)" y " (Exit Hyper Terminl)" Click [ (Yes)] on the conformtion to disconnect screen y Click [ (No)] on the confirmtion to sve screen Hyper Terminl exits nd the APN settings complete. APN informtion is sved on the FOMA hndset. If you connect different FOMA hndset, sve the APN informtion gin. If you wnt to use the APN informtion sved on the PC, register the sme APN to the sme cid on the FOMA hndset. 20 You cn lso enter the leding "184" or "186" to the phone numer of n APN for dil-up connection to disply or hide the Cller ID. P20, P22 If you set Cller ID notifiction using the *DGPIR commnd nd the dil-up connection setting, the dil-up connection setting tkes precedence. For exmple, even if you set <n> of the *DGPIR commnd to 2, entering the leding "184" (hide) to the APN numer in the dil-up network hides the Cller ID. When using overses, set AT*DGPIR=0 (Defult). Clls will e mde ccording to the registered APN. Configuring Dil-up Network Settings Set up the dil-up network on the PC. This section descries the steps to connect to "moper U" tht hs een set to <cid>=3 in the USB connection s n exmple. For setting up connections to other thn "mopoer U" or "moper", contct your ISP. For Windows XP Click " (Strt)" y " (All Progrms)" y " (Accessories)" y " (Communiction)" y " (New Connection Wizrd)" Continued on the next pge
c d e f g On the New connection wizrd screen, click [ (Next)] Select " (Connect to the Internet)" y Click [ (Next)] Select " (Set up the connection mnully)" y Click [ (Next)] Select " (Use dil-up modem to connect)" y Click [ (Next)] If the " (Select device)" screen opens, select "Modem - FOMA M702iG" y Click [ (Next)] The " (Select device)" screen opens only when there is more thn one modem. For Bluetooth Connection Select the modem you checked in "Checking the Modem" (P8). Enter nme in the " (ISP Nme)" field y Click [ (Next)] i j k l Enter " (User Nme)", " (Pssword)", nd " (Confirm pssword)" y Click [ (Next)] Enter the fields ccording to the informtion provided y your ISP. For "moper U" or "moper", the fields cn e left unfilled. Click [ (Finish)] The new connection wizrd ppers. Click " (Strt)" y " (All progrms)" y " (Accessories)" y " (Communiction)" y " (Network connection)" Select the icon of the creted dil-up connection y Click " (Chnge the setting of this connection)" h Enter the APN phone numer in the " (Phone Numer)" field y Click [ (Next)] When you connect "moper U", enter "*99***3#" to the ccess point numer. m Check the settings on the " (Generl)" t screen If two or more models re connected to the PC, set only "Modem -FOMA M702iG" to in the (Connection Method)" field. Set " (Use diling informtion)" to. 21 Continued on the next pge
n o p q Click the " (Network)" t y Set s the exmple on the screen Select "PPP:Windows 95/98/NT4/2000,Internet" in the " (Dil-up server type to cll)". Set " (Internet Protocol) (TCP/IP)" to in the " (This connection uses the following items)" field. You cnnot chnge the settings of " (QoS Pcket Scheduler)". Click [ (Settings)] Set ll items to y Click [] On the " (Network)" t screen, click [] For Windows 2000 Click " (Strt)" y " (Progrms)" y " (Accessories)" y " (Communiction)" y " (Network nd dil-up connection)" c d e f g h i On the Network nd Dil-up connection screen, doule-click the " (Crete new connection)" icon. If the loction informtion screen opens, enter " (City code)" y Click [] This ppers only when " (Crete new connection)" is lunched for the first time. Go to Step 5 when lunching this for the second time or lter. On the phone nd modem option screen, Click [] On the Network connection wizrd screen, Click [ (Next)] Select " (Connect to the Internet vi dilup)" y Click [ (Next)] Select " (Set up the Internet connection mnully, or connect using LAN)" y Click [ (Next)] Select " (Connect to the Internet using phone line nd modem)" y Click [ (Next)] If the modem selection screen opens, select "FOMA M702iG" y Click [ (Next)] This screen my not open depending on the operting environment of your PC. Go to Step 10 if this screen does not open. For Bluetooth Connection Select the modem you checked in "Checking the Modem" (P8). 22 Continued on the next pge
j Enter the APN phone numer in the " (Phone Numer)" field y Click [ (Advnced settings)] When you connect "moper U", enter "*99***3#" to the ccess point numer. Set " (Use city code nd diling informtion)" to. k Set the " (Connection)" t screen ccording to the exmple on the screen If you re connecting to other thn "moper U" or "moper", configure " (Connection type)" nd " (Log on procedures)" ccording to the settings provided y your ISP. m n On the " (Internet ccount connection informtion)" screen, click [ (Next)] Enter " (User Nme)" nd " (Pssword)" y Click [ (Next)] Enter the fields ccording to the informtion provided y your ISP. For "moper U" or "moper", the fields cn e left unfilled. If they re not filled, screens wrning tht the user nme nd pssword fields re not filled open one fter nother. Click [ (Yes)] on ech screen. l Click the " (Address)" t y configure settings ccording to the exmples on the screen y Click [] If you re connecting to other thn "moper U" or "moper", configure " (IP ddress)" nd (Assign DNS ddress utomticlly y ISP)" ccording to the settings provided y your ISP. o p q r Enter connection nme in the " (Connection Nme)" field y Click [ (Next)] Select " (No)" y Click [ (Next)] Click [ (Finish)] If " (Select this to connect to the Internet now nd click Finish)" ppers, set the option to. Select the icon of the creted dil-up connection y Click " (File)" y " (Properties)" 23 Continued on the next pge
s Check the settings on the " (Generl)" t screen If two or more models re connected to the PC, set only "Modem -FOMA M702iG" to in the " (Connection Method)" field. Set " (Use diling informtion)" to. u v Click [ (Settings)] Set ll items to y Click [] w On the " (Network)" t screen, click [] t Click the " (Network)" t y Set s the exmple on the screen Select "PPP:Windows 95/98/NT4/2000,Internet" in the " (Dil-up server type to cll)". Set only " (Internet protocol) (TCP/IP)" to in the " (Checked components re used for this connection)" field. Communicting This section descries steps to strt nd terminte communiction set up without using the FOMA PC configurtion softwre. Use the sme FOMA hndset tht ws connected when you set up the communiction. Using nother FOMA hndset requires re-instlltion of the communiction configurtion file. <Exmple: For Windows XP> Click " (Strt)" y " (All progrms)" y " (Accessories)" y " (Communiction)" y " (Network connection)" y Doule-click the ccess point tht hs een set up For Windows 2000 Click " (Strt)" y " (Progrms)" y " (Accessories)" y " (Communiction)" y " (Network nd dil-up connection)" y Doule-click the ccess point tht hs een set up 24 Continued on the next pge