Gibson 2015 Les Paul Supreme Additional Specifications New and Improved in 2015 Zero Fret Adjustable Nut (patent applied for): Added action adjustment Upgraded Tune o matic bridge with titanium saddles: Ease of height adjustment and sustain Wider neck and fingerboard: Increased playing area with same string spacing Comprehensive wood selection and grading: Rarest and finest materials for best instruments Pearl Inlays: Better appearance and value Comprehensive Setup (Lower Frets, Improved Plek, Intonation): Silky smooth action and bending, improved intonation Improved contact output jack: Secure contact and uninterrupted signal More robust cables: Stronger signal strength Les Paul Hologram: Authenticity and tribute New & Improved Hardshell Case: Improved protection (up to 15 foot drop), sleek, ergonomic, made in USA Body Top Back Wood Species: Maple Mahogany/Maple Pieces: 2 2 Grade (Top)/Density (Back): AAAA Ultra Low/AAA Binding: 7-Ply Black and White 3-Ply Black and White Weight Relief: Tonal, Resonant, and/or Technical Effect: Body Contour/Carve: Supreme Glue: Franklin Titebond 50 The only guitar in the 2015 lineup with a figured maple back provides a solid mass to generate maximum sustain and beautiful looks Neck Neck Wood Species: Mahogany Pieces: 1 Classic
Truss Rod: Les Paul Profile: Rounded Asymmetrical Thickness at Fret 1: 20.78 mm /.818" Thickness at Fret 12: 24.46 mm /.963" Other Materials: Franklin Titebond 50 Tonal, Resonant, and/or Technical Effect: The rounded asymmetrical neck provides an ergonomic feel and the mahogany adds a rich tonal quality Neck Fit Joint Angle: 2.5 Degrees Joint Angle Tolerance: 0 Deg 0 Min 15 Sec Type: Mortise and Tenon Adhesive: Franklin Titebond 50 Gauges Used: Pitch Height Gauge, Alignment Gauge Fingerboard Wood Species: Composite Pieces: 1 Shade: Black Radius: 30.48 cm / 12" Frets: 22 Nut/End of Board: 4.5993 cm / 1.795" @ Nut 5.9944 cm / 2.360" @ End of Board Scale: 62.865 cm / 24.75 Binding: White Side Dots (Color): Black Inlay Style: Crown Inlay Material: Mother of Pearl Dimensions: From 25.4 mm x 24.765 mm / 1.0" x 0.975" to 5.08 mm x 36.195 mm / 0.20" x 1.425" Nut Style: Zero Fret Nut Material: Cryogenically Treated Brass Width: 4.5993 cm / 1.795" Slots: E: 1.4732 mm / 0.058 inches A: 1.2192 mm / 0.048 inches D: 0.9652 mm / 0.038 inches G: 0.7112 mm / 0.028 inches B: 0.4826 mm / 0.019 inches e: 0.3556 mm / 0.014 inches Peghead Type: SP-2
Inlay: Pearl Peg Head Binding: 5-Ply Black and White Logo: Mother of Pearl Gibson Silkscreen: Gold Les Paul 100 Headstock Angle: 17 Degrees Finishes Seafoam Green Heritage Cherry Sunburst Perimeter Color Code: 6G 6H Surface Texture: Smooth/ Hi Gloss 90 Sheen Lacquer Smooth/ Hi Gloss 90 Sheen Lacquer Filler: Clear Walnut Sealer: 1 1.5 mils 1 1.5 mils Top Coat: Hi Gloss Lacquer/ 90 Sheen 7 8 mils Hi Gloss Lacquer/ 90 Sheen 7 8 mils Scraped: Fingerboard Sides, F Holes, Headstock, Body and Nut Fingerboard Sides, F Holes, Headstock, Body and Nut Pickups Rhythm Lead Style: Floating Mini Humbucker (Gold Cover) 492R (Gold Cover) Winds/Coil: Screw side/slug side: 4250 3800/3800 Material of Wire (gauge): Copper (42) Copper (42) Coil Dimensions (per coil): 63.5mm x 7.92 mm x 12.7 mm / 2.5" x. 312" x.500" 6.6294 cm x 1.7272 mm / 2.61" x 0.68" Coil Material: ABS ABS Coil Winding Process: Machine Wound Machine Wound Pole Piece Position from Nut: 47.3075 cm / 18.625" 59.52998 cm / 23.437 Slug Dimensions (diameter x length): 4.7498 mm x 1.24206 cm / 2.36" x 0.489" 4.7498 mm x 1.24206 cm / 0.187 x 0.489" Magnet Material: Alnico V Alnico #2 (smooth) Magnet Position from Nut: 48.26 cm / 19" 58.7375cm / 23.125" Magnet Dimensions: 5.94 cm x 1.27 cm / 2.33" x 0.5" 6.35 cm x 1.27 cm / 2.5" x 0.5" Polarities: Screw side is the south pole of magnet Screw side is the south pole of magnet Qfactor: 5.6 6.33 ResistanceDC: 6.18k ohms 5.51k ohms Resonant Frequency: 3857.48 Hz 3720.67 Hz Tonal & Resonant Advancements: Classic humbucker tone with historically "unmatched" bobbin windings for vintage humbucker tone with enhanced highs. Unbalanced windings similar to the Burstbucker except with coil offset reversed. (Screw coil has more winds than slug coil). Reversed coil offset designed to provide balance between coils, and still offer vintage humbucker voice. Electronics Control Pocket Assembly Lead Volume Rhythm Volume Type: 500K Non Linear 500K Non Linear Peak Voltage: 500V 500V Range: 0 500K 0 500K
Power Rating: 1/4 watt above 100K ohms 1/4 watt above 100K ohms Resistance Tolerance: +/ 20% +/ 20% Minimum Resistance: 200 ohms 200 ohms Lead/Rhythm Tone Type: 500K Non Linear Peak Voltage: 500V Range: 0 500K Power Rating: 1/4 watt above 100K ohms Resistance Tolerance: +/ 20% Minimum Resistance: 200 ohms Capacitors: Lead Value/Rhythm.022 uf Hardware Tuning Keys/Tuning Key Details Style: Locking Grover Keystone Material: Zamak Weight: 36.85 gm / 1.3 oz Tuning Ratio: 18:01 Gear Type: Worm What is allowable turn: +/ 4 degrees Plating specs: Gold Part numbers: 430 14770 / 430 14771 String Dimensions E: 1.1684mm / 0.046" A: 0.9144 mm / 0.036" D: 0.6604 mm / 0.026" G: 0.4064mm / 0.016" B: 0.2794mm / 0.011" e: 0.2286mm / 0.009" Bridge Style: Tune o matic w /Titanium saddles Material: Zamak base Plating Specs: Gold Plating on Base Only Part number: 430 14384 Dimensions of String Slots Weight: 72.5748 gm / 2.56 oz E: 1.4732mm / 0.058" A: 1.2192mm / 0.048" D: 0.9652mm / 0.038" G: 0.7112mm / 0.028" B: 0.4826mm / 0.019'' e: 0.3556mm / 0.014" Tailpiece Style: Stop Bar
Compensated: No Material: Zamak Plating Specs: Gold Part number: 430-10134 Weight: 82.21 gm / 2.9 oz Output Jack Style: 1/4" mono with dual tip contact Jack Plate Style: Supreme Material: Brass Part Number: 430 19462 Weight: 76.54 gms / 2.7 oz Strap Buttons Material: Brass Plating Specs: None Part numbers: 430 19160 / 430 19160E Weight: 4.0 gm / 0.14 oz Plastics Truss Rod Cover Style: Gold plated bell engraved "Les Paul" Part Number: 430 19377 Knobs Style: Gold Metal with pearl Part Number: 430 19126 Trim Rings Style: White with Gold cap Part Number: 430 13199 Accessories Case Style: Hard Shell Color: Gold Molded Strap Locks: No Truss Rod Wrench,.050 + Tools: 2.5mm Allen wrenches Manual: Gibson USA Owner's COA/Other: None