MS070300TX- ANTIQUE WHITE MS070400TX- ANTIQUE BLACK For assistance with assembly contact: Southern Enterprises Inc. Customer Service 1-800-633-5096 service@seidal.com www.seidal.com PO:
Parts List Please review all parts and hardware before disposing of any packaging. Call Customer Service if missing hardware. Do not return to store/retailer. Using hardware that is too long will cause damage. Before beginning assembly, separate each type of hardware. Carefully study the hardware diagrams below. You may receive extra hardware with your unit. 1 2 3 Bottom Panel Left Side Panel Right Side Panel 4 5 6 Right Middle Panel 7 8 Left Middle Panel Fixed Shelf 9 Apron Foot Left Door 10 11 12 Right Door 13 Top Panel 14 Back Panel 15 Drawer Face Panel 16 Drawer Side Panel 17 Drawer Bottom Panel 18 Drawer Back Panel Adjustable Shelf Center Foot
Parts List Please review all parts and hardware before disposing of any packaging. Call Customer Service if missing hardware. Do not return to store/retailer. Using hardware that is too long will cause damage. Before beginning assembly, separate each type of hardware. Carefully study the hardware diagrams below. You may receive extra hardware with your unit. 7 8 (C) 0 3.5mm x 12 mm Screw For Back (D) (E) (F) Metal Nut 3/16 x 38 mm Bolt For Drawer Wood Knob (G) (H) (I) 5/32 x 22mm Bolt For Wood Knob Metal Pin Magnet Pin (J) (K) (L) 3mm x 10 mm Screw For Magnet Pin Magnet 3.5mm x 15 mm Screw For Magnet Care and Cleaning Instructions: Before using, wipe with a clean, dry cloth. Periodically apply furniture wax to renew the finish. Avoid rubbing or scratching the Assembly Tool Required No. 2 Phillips Screwdriver surface with rough or abrasive objects. For replacement parts or questions, please call Customer Service at 1-800-633-5096. Do not return product to store. Please call manufacturer for assistance, questions or parts. Assembly Tool Required No. 2 Phillips Screwdriver (Not Included)
: Wood may scratch easily. Be careful when assembling. Do not scratch. Figure 1 Step 1. Unpack and lay parts on clean, padded surface like carpet or blanket. Check that you have all parts indicated on the front page. Step 2. Insert two s into predrilled holes in Side Panel(2,3) each and two s in Right Middle Panel(4). Be sure that the cross bar on the Right Middle Panel(4) faces the Left Side Panel(2). Step 3. Attach Side Panels(2,3) and Right Middle Panel(4) to Bottom Panel(1) with Bolts and tighten. of 6 of 6 Step 1. Insert s in Right side of Fixed shelves(6) and s into decorative Apron(7). Step 2. Attach the decorative Apron(7) to Bottom Panel(1) by Bolts and tighten. Step 3. Attach the Fixed shelves(6) to the Right Middle Panel(4). of 7 Figure 2
B Step 1. Insert s in predrilled holes in the Left Middle Panel(5) and s in the other side of Fixed Shelf(6). Be sure the cross bar on the Left Middle Panel(5) faces the Right Side Panel(3). Step 2. Attach Left Middle Panel(5) to the Bottom Panel(1) and fasten by Bolts. Step 3. Screw Feet(8) and center foot(18) into Bottom Panel(1) and tighten. B of 6 Figure 3 Step 1. Attach the two side Doors(9,10) to hinged side panels(2,3) and insert the hinge. Figure 4 (I) (J) Magnet Pin 3mm x 10mm Screw For Magnet Pin Step 1. Attach the Magnet(K) to the Top Panel(11) with Screw For Magnet(L). (K) Magnet Figure 5 (L) 3.5mm x 15mm Screw For Magnet
Step 1. Insert the s into Predrilled top holes in Side Panels(2,3) and Middle Panel(4,5). Step 2. Attach the Top Panel (11) into the Panels(2,3,4,5) with Bolts and tighten. Figure 6 Step 1. Insert Back Panel(12) into grooves of side panels with Screw For Back(C) and tighten. Figure 7 (C) 3.5mm x 12 mm Screw For Back 0 Step 1. Insert Nut(D) into predrilled holes on Drawer Face Panel(13). Step 2. Attach Drawer Side Panels(14) to Drawer Face Panel(13) with Bolt for Drawer(E) through outer predrilled holes in Drawer Side Panels(14). (D) Metal Nut Figure 8 (E) 3/16 x 38 mm Bolt For Drawer
Step 1. Put the Drawer Bottom Panel(15) into inner grooves of Drawer Side Panels(14) and Drawer Face Panel(13). Figure 9 Step 2. Insert Nut(D) into predrilled holes on Drawer Back Panel(16), then be attach Drawer Back Panel(16) to end side of Drawer Side Panels(14),fasten with Bolts for Drawer(E) and tighten. (D) (E) Metal Nut 3/16 x 38 mm Bolt For Drawer Step 1. Attach Wood Knob(F) into the Drawer Face Panel(13) with Bolt For Wood Knob(G) and tighten. Figure 10 (F) (G) Wood Knob 5/32 x 22mm Bolt For Wood Knob Step 1. Insert the Metal Pins(H) into desired holes of side panels(2,3,4,5). Step 2. Put the Adjustable Shelves(17) above the Metal Pins(H). Step 3. Attach the Wood Knob(F) into the Doors(9,10) with Bolt For Wood Knob (G) and tighten. Step 4. Put the finish drawer in the Bottom space. Figure 11 (F) (G) (H) Wood Knob 5/32 x 22mm Bolt For Wood Knob Metal Pin
Parts Replacement Form Customer Information Name Address City/State/Zip Code Phone Number Please indicate where you purchased this item: Store/Website/Catalog Please indicate color/size/style number: Style No Parts Letter Parts Description Needed Please immediately examine this product carefully. Any request for missing parts or damage replacement must be received within 90 days of your receipt of the product. Replacement, if available, will be honored within this time frame. Parts will not be available for items arriving fully assembled. We do not recommend modifying product(s) and we are not responsible for any damages due to product modification(s). If damages or missing parts are not reported within 90 days of your receipt, we are under no obligation to provide parts or replacement merchandise. Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am 4pm Mon-Fri Central time if you have product issues or email us at service@seidal.com. Please ask for customer service representative for issues involving damages or replacement parts. Please ask for technical assistance representative for any issues with product and assembly/construction. Please contact the retailer that you purchased from for returns. Customer Service 1-800-633-5096 service@seidal.com Southern Enterprises, Inc. 600 Freeport Parkway, Suite 200 Coppell, Texas, 75019
CAUTION The top shelf is intended for a flat screen television with a maximum overall width of 50 and supports up to 175 lb. The top shelf is NOT INTENDED for tube televisions. Each center shelf should not be loaded with more than 20 lb. Each side shelf should not be loaded with more than 15 lb. DO NOT EXCEED RECOMMENDED LOAD. Use with products heavier than the maximum sizes and weights indicated may result in instability causing possible injury. This unit contains a permanent warning sticker located on under side of top shelf or inside drawer. Do not allow children under 16 years to move the cart. Model: MS070300TX & MS070400TX Large TV/Media Stand Southern Enterprises, Inc 600 Freeport Parkway, Suite 200 Coppell, Texas, 75019 Manufacture Date: 09/01/2011 Style No Parts Letter Parts Description Needed