2 way full range loudspeaker for portable PA applications 2,500 Watt power featuring KLARK TEKNIK Class-D technology KLARK TEKNIK Digital Signal Processing for total system control ULTRANET digital audio networking connects to mixers and other sources Carbon fibre loaded 12" low frequency driver with inside/outside wound coil Titanium dome 1" neodymium motor compression driver Fully featured user interface with LCD display for ease of navigation USB remote control via PC or Mac* Computer Low distortion waveguide provides 90 H x 50 V dispersion 15 mm (5 8") birch plywood enclosure, finished in a black semi-matt textured paint Rugged powder coated perforated steel mesh grille Dual angle pole mount for accurate coverage control Multiple internal rigging points for install applications Mains input and link output on Neutrik powercon* connectors 3-Year Warranty Program** Designed and engineered in England The TURBOSOUND SIENA TSP122-AN is a powered two way full range loudspeaker with digital networking designed for a wide range of portable PA applications. The carbon fibre loaded 12" low frequency driver utilises a specialised voice coil wound on both the inside and the outside of the coil former for higher magnetic density, which results in better cooling, higher power handling, and improved efficiency. The titanium dome 1" neodymium high frequency compression driver is mounted on a low distortion waveguide providing 90 horizontal x 50 vertical dispersion. As with all TURBOSOUND powered loudspeakers, the TSP122-AN features a very efficient and lightweight two channel KLARK TEKNIK Class-D power amplifier which provides 2,500 Watts of peak power. A high degree of control over the loudspeaker system's performance is provided by the highly sophisticated KLARK TEKNIK Digital Signal Processing which offers dynamic EQ for impressive full range response at low volume levels, and transparent limiting to ensure the utmost clarity at high output levels, and the assurance of long term reliability. The loudspeaker's rear panel amplifier module carries a fully featured user interface consisting of a LCD display providing intuitive access to level, EQ, and pre-set frequency contours that optimise response, and provides USB remote control via PC or Mac* Computer. *Mac is a trademark of Apple Inc. All third-party trademarks are the property of their respective owners. Their use neither constitutes a claim of the trademark nor affiliation of the trademark owners with MUSIC Group. Product names are mentioned solely as a reference for compatibility, effects and/or components. **Warranty details can be found at music-group.com.
In addition to the balanced combination Jack/XLR input, a balanced XLR output is provided. The TSP122-AN is equipped with proprietary ULTRANET technology, using CAT5 cables to transmit pristine quality multi-channel audio signals and other information between ULTRANET enabled products such as digital mixers and personal monitor systems. Mains power is connected via a locking Neutrik powercon* connector. The TSP122-AN is fitted with a dual angle pole mount socket, allowing it to be pole mounted straight on or raised higher and angled downwards to optimise audience coverage. The roadworthy 15 mm (5/8") birch plywood cabinet with rugged powder coated perforated steel mesh grille and is fitted with multiple internal rigging points for permanent installations, and is finished in hard wearing semi matt black paint. 2 of 6
Technical Specifications Dimensions (H x W x D) 612.4 x 384.6 x 341.4mm (24.11x 15.14 x 13.44") Net Weight 19.4 kg (42.5 lbs) Components 1 x 12" (305 mm) LF Driver, 1 x 1" (25 mm) HF Compression Driver Frequency Response 56 Hz - 18 khz ±3 db, 45 Hz - 20 khz ±10 db Maximum SPL 135 db Peak Construction 15 mm (5/8") Birch Plywood. Finished in Semi Matt Black Paint Connectors 1 x Jack/XLR Input, 1 x XLR Output, Neutrik powercon* Mains In, USB, ULTRANET In and Thru Output Power 2,500 Watts Peak Controls Gain (Per Channel) Indicators Signal, Peak, LCD Panel Flying hardware M10 Internal Rigging Points More Information More information can be found on our website: www.turbosound.com Grille Powder Coated Perforated Steel with Foam Backing Amplifier Type Class-D Input Sensitivity: Mic: -32 dbu; Line: -2 dbu Input Impedance: Mic: 560 Ohms Unbalanced, 1k Ohms Balanced Line: 20k Ohms Unbalanced, 40k Ohms Balanced Amplifier Protection: Full Short Circuit, Open Circuit, Thermal 3 of 6
4 of 6
5 of 6
For service, support or more information contact the TURBOSOUND location nearest you: Europe MUSIC Group Services UK Tel: +44 156 273 2290 Email: CARE@music-group.com USA/Canada MUSIC Group Services NV Inc. Tel: +1 702 800 8290 Email: CARE@music-group.com Japan MUSIC Group Services JP K.K. Tel.: +81 3 6231 0454 Email: CARE@music-group.com MUSIC Group accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein. Technical specifications, appearances and prices are subject to change without notice. All trademarks are the property of their respective owners. MIDAS, KLARK TEKNIK, TURBOSOUND, BEHRINGER and BUGERA are trademarks or registered trademarks of MUSIC Group IP Ltd. MUSIC Group IP Ltd. 2014 All rights reserved.