Safe BB Gun Shooting

Similar documents
Arisaka Type 38 Rifle Disassembly and Reassembly

AXIOM Rifle Stock. Owner s Manual. Installation Instructions

M14 MODULAR CHASSIS SYSTEM (MOD 1) INSTRUCTION MANUAL. West Springfield, MA Phone: (866) FAX: (413)

M14 MODULAR CHASSIS SYSTEM (MOD 1) INSTRUCTION MANUAL. West Springfield, MA Phone: (866) FAX: (413)

WHEATHAMPSTEAD ARCHERY CLUB

Marble Arms Front Sight Part Numbers Gun Sight Specifications Installation & Maintenance Instructions

Usage and Assembly Instructions

Assembly, Use and Care Instructions

ASSEMBLY INSTRUCTIONS

SPECIFICATIONS. The WM-6XL Long Wm. Malcolm Telescopic Riflescope Instruction Manual WARNING:

Rifle Stocks - the Dummies Guide

Usage and Assembly Instructions

Work Space Set-up. Slats will level the pipe during bending and help minimize twisting of the bow.

LG400 Operating Instructions

LifeGear G1 /HOME GYM ITEM NO.: 63100

CROWNARC. ARC Integrated Systems

Maintenance & Parts list for:

Owner s Manual #TSGUARD

Q-Zone Hoop-Frame. Assembly Instructions. Copyright July 11, 2018 Grace Company (Reproduction Prohibited) Version 1.8

and ps is ready to help!

CALIBURN ASSEMBLY INSTRUCTIONS

2014 Lancer Systems all rights reserved

CALIBURN ASSEMBLY INSTRUCTIONS

2008 Technical Manual

1) Place the magazine cut-off in the center position between off and on (as shown in figure 1). 2) Remove the bolt.

Lesson 3: Good Posture and Form

you can recover TRI with TARGETED REHABILITATION IMPROVED OUTCOMES Home Programme

Photographic Standards in Plastic Surgery

REVERSE DRAW CROSSBOW ASSEMBLY MANUAL

Hardware and Components:

Chapter - 1: Introduction to Pattern Making

7. The second practitioner should lower the measuring arm so that it is just above the head but not touching.

RIVAL CALIBURN ASSEMBLY

Portable Air Gun Range Patent Pending

Daisy National BB Gun Championship Advance Topics: Online Results. Erik Anderson Ph.D. Shooter s Technology LLC. 3 July 2016

New Skills: Finding visual cues for where characters hold their weight

MOUNTING AND ZEROING RIFLESCOPES FOR SERVICE RIFLE SHOOTING By Marcus O'Dean

Assembly Instructions. Table of Contents

Installation Instructions Universal Crossmember Kit - 60 Track Width BEFORE Measure Twice, Weld Once! II

Hot Stone Massage Routine. Order of routine

ASSEMBLY INSTRUCTIONS & OWNERS MANUAL

How to create a Fairy Tea Light with Polymer Clay

Workstation Layout. LC-0246 Rev. 03/16

QB78 CO 2 Pellet Rifle

Continuum Frame Assembly Instructions

This guided meditation will help you set an intention for the coming year. Intentions are

CALIBURN ASSEMBLY INSTRUCTIONS

AR-15 Lower Receiver Assembly Instructions

PORTA TRAK OWNERS MANUAL

Honda Gold Wing GL1800 Floorboards Installation Instructions #GL18020

General Camera Posing Tips. The following are some general camera posing tips that will help you get started. Dos and Don ts:

LINEAR BEARING SMITH MACHINE. Assembly Manual (888) FOR YOUR SAFETY READ ALL INSTRUCTIONS CAREFULLY

SURESHOT ARMAMENT GROUP SVD DRAGUNOV FREEFLOAT CHASSIS INSTALLATION MANUAL

Hitchhiking Ghosts : Phineas. Fold. Fold. Fold. Fold. Fold. Fold A A. Fold. Fold. Fold. Fold. Fold. Disney. Fold Fold. Disney. Fold.

Assembly Instructions for model: VMPR1

WESTERN PISTOL.22 CALIBER SINGLE SHOT. Entire pamphlet Copyrighted by JACO Designs 1972

SET-UP & MAINTENANCE GUIDE. DME Helical Gear Stack Mold Centering Devices

BIFOLD FUTON FRAME TRINITY ARM. Seat Rails and Slats x 1. *Note: Use 4pc of 100mm Bolts and 4pc of 60mm Bolts to attach the arms to the Stretchers.

The Basics of Longarm Quilting

Kitronik Ltd How to make a be seen be safe armband

Brochure Includes: Set-up Instructions Operating Instructions Parts List Fundamentals of Drill Sharpening. Patent 3,952,459

Hardware and Components:

POWER TOWER OWNER S. Item #1720

Welcome to this free sample of Fantastic Fingers activities for preparing children s bodies and minds for school

INTRODUCTION THANK YOU FOR CHOOSING OUR OVERLOCK MACHINE FOR YOUR SAFETY BEFORE YOU USE - 1 -

45 CUTTING HEAD TILE SAW-BLADE ALIGNMENT PROCEDURE

Lab 10 Orienting with a Twist

Dynamic Stander (21") K130 Product Manual

Series Assembly Instructions

JumpKing Combo (JKCB1505 & JKCB1405) Trampoline Section Instructions.

Build your own. Stages 7-10: See Robi s head move for the first time

WORK ORDER. Good Measure Designs, Inc.

Using the Ruler Tool to Keep Your Tracks Straight Revised November 2008

Page 1. Jumblenut. The Head. Design by Barbara Allen

INSTALLATION INSTRUCTIONS

ADJUSTABLE BUTT PLATE. Instruction manual for K-80 and KX-6

CROSSBOWS AXCT185. Compound Crossbow OWNER S MANUAL

GUNSMITHING. TEL NO: G UNSM I T H I N G

White Quail Auto Trap

WORK ORDER. Good Measure Designs, Inc.

Supplies: * 18 gauge wire * 28 gauge wire * Needle nose wire cutters * Sherry s pattern * Embellishments

PRO-TACH CHRONOGRAPH OPERATING INSTRUCTIONS *** WARNING ***

HQ Studio Frame Two-Foot Section Assembly Instructions From Twelve-Foot to Ten-Foot

THE ACOUSTIC GUITAR BAPAM FACTSHEET. Playing technique and ergonomics

Dream Fabric Frame Assembly Instructions

Bend-Tech Dragon Assembly Manual

Dynamic Stander (25") K150 Product Manual

CV1B Sliding Table Installation and Setup Guide

ALOIS TOMÁNEK FORMS OF PUPPETS

CLOTHING MEASUREMENT BEST PRACTICES MEN S / UNISEX WOMEN S

Dream Fabric Frame Assembly Instructions

Instructions For PRECISION FIT STOCK. Welcome To The New World Of Shooting! Expect To Win!

BF12-SERIES Flash Stands

Wiring Techniques for Wiring a Lamp

HOW TO TUNE A QB SERIES CO2 AIRGUN FOR NOOBS.

HOW TO RESTORE THE FLOW OF ENERGY TO YOUR LIGHT BODY AND TO ENGAGE YOUR CHAKRAS IN 3 EASY STEPS. Sarah Negus

Office Ergonomics. Proper Ergonomics Training

Assembly Instructions

Elevation M16 A2-1 click=1 ¼ MOA M4-1 click=2 MOA

MARCHING BATTERY TECHNIQUE Mark Lortz Director of Bands Stevenson University

Transcription:

CMP BB Gun Shooting Poster Series - I Safe BB Gun Shooting Safe BB Gun Handling: 1. I will always keep my gun muzzle pointed in a safe direction I will never point it at a person 2. I will always keep my finger outside of the trigger guard until I start to aim at a target 3. I will never cock or load a BB gun anywhere except on the firing line after a Range Officer commands LOAD 4. I will never attempt to fire a BB gun except on the firing line after a Range Officer commands START 5. After I fire my last shot, I will put my BB gun on half-cock and ground it BB Gun Half-Cock BB gun shooters shoot in pairs one shooter and one helper (for safety, loading, etc.) Safe BB Gun Loading For Daisy M499 BB Gun 1. Shooter: Lower BB gun from shoulderopen to half-cock 2. Helper: Drop BB in gun muzzle 3. Shooter: Cock BB Gun replace buttplate in shoulder fire next shot

CMP BB Gun Shooting Poster Series - II Firing the Shot 2. Breath Control: Stop breathing to aim and fire 1. Sight Alignment: Shoulder gun--look through the rear sight aperture see the front sight in the center of the rear aperture Breathe normally before starting to aim, exhale and stop breathing while aiming 3. Aiming (Sight Picture): Point aligned sights at target center target or bull s-eye in front sight ring keep movements centered Trigger pressure chart--apply pressure smoothly 4. Trigger Control: With the target or bull s-eye centered in the front sight ring, press the trigger smoothly until the shot fires. When the shot fires, remember where the bull was at that instant (shot call and follow-through)

CMP BB Gun Shooting Poster Series - III Supported Position Supported Position Keys: 1. Rifle support (rest) should be 8-10 high 2. Lie behind support with body at a 20-30 angle 3. Hold fore-end with left hand rest hand and gun on support 4. Keep butt-plate up in shoulder so head is erect 5. To shoot center bull in aligned sights press trigger smoothly

CMP BB Gun Shooting Poster Series - IV Standing Position 3 4 2 1 Standing Position Keys: 1. Turn feet and body 90 degrees away from target 2. Relax left arm on side-- keep left elbow directly under rifle 3. Keep butt-plate up in shoulder so head is erect 4. Adjust left hand position to raise sights to target height (wrist straight = higher, wrist bent = lower) 5. To shoot--align sights on target center press trigger smoothly

CMP BB Gun Shooting Poster Series - V Proper Sling Use 1. Hold sling with loop in right hand and loop buckle up 2. Open sling loop place loop high on arm 3. Tighten sling on upper arm 4. Twist sling swivel one-half turn to right, attach to foreend start with sling as long as possible 5. Get into position with the sling adjusted long & loose --move left hand back & forth to raise gun sights to target level 6. Tighten sling so it supports gun

CMP BB Gun Shooting Poster Series - VI Prone Position Prone Position Keys: 1. Lay at a 20-30 angle to the line of fire 2. Form straight line along left side from left hand to left foot place left elbow under this line 3. Keep butt-plate up in shoulder so head is erect 4. Adjust rifle height by moving left hand forward & rearward 5. Tighten sling so it supports gun and upper body 6. Rotate position over the left elbow if the sights do not point at your target 7. To shoot center target in aligned sights press trigger smoothly

Kneeling Position Keys: 1. Turn kneeling roll 40-60 away from target place right ankle on top of kneeling roll 2. Sit on right heel keep body weight back on heel 3. Keep butt-plate up in shoulder so head is erect 4. Move left hand forward & rearward on fore-end until sights are at target level 5. Tighten the sling so it supports the gun 6. Rotate the position over the kneeling roll if the sights do not point at your target 7. To shoot center target in aligned sights press trigger smoothly Kneeling Position CMP BB Gun Shooting Poster Series - VII

CMP BB Gun Shooting Poster Series - VIII Sitting Position Two Options: 1. Cross-Legged (left) for shooters with longer arms/shorter bodies or-- 2. Cross-Ankled (below) for shooters with shorter arms/longer bodies Try them both see which position makes it easier to keep your head up and the sights at target level move left hand to rear to raise gun and sights Sitting Position Keys: 1. Turn body 45 for cross-legged, 30 for cross-ankled position 2. Cross left leg over right leg the leg that supports the gun goes on top 3. Place both elbows on legs 4. Keep butt-plate up in shoulder so head is erect 5. Move left hand back until sights are at target level 6. Tighten sling so it supports the gun 7. Rotate position over the buttocks if the sights do not point at your target 8. To shoot center target in aligned sights press trigger smoothly