*RoHS OMPLINT & **HLOGN R eatures n Protects one line or one I/O port n idirectional configuration n S protection 30 max. n Low capacitance ~ 3 p typ. n Replaces 0805 MLV devices n RoHS compliant* n Halogen free** pplications n VSL lines n Modems n Routers SO323-Txx-SL - TVS iode Series General Information Portable communications and telecom equipment manufacturers are challenging the semiconductor industry to develop increasingly smaller electronic components for highspeed communication rates. IIRTIONL ourns offers Transient Voltage Suppressor iodes for surge and S protection applications in SO323 package size format. The Transient Voltage Suppressor iode series offers a choice of voltage types ranging from 2 V to 24 V in a bidirectional configuration. ourns hip iodes conform to J standards, are easy to handle on standard pick and place equipment and their flat configuration minimizes roll away. The ourns device will assist compliance with I 6000-4-2 (S), I 6000-4-4 (T) and will assist in meeting I 6000-4-5 (Surge) requirements. 2 bsolute Maximum Ratings (@ T = 25 Unless Otherwise Noted) Parameter Symbol T2-SL T24-SL Unit Peak Pulse urrent (t p = 8/20 µs) I PPM 6 Peak Pulse Power (t p = 8/20 µs) P PP 350 Operating Temperature T J -55 to +50 º Storage Temperature T STG -55 to +50 º S Protection (per I 6000-4-2) ontact ischarge Minimum Maximum ir ischarge Minimum Maximum S S S S ±8 ±30 ±5 ±30 lectrical & Thermal haracteristics (@ T = 25 Unless Otherwise Noted) Parameter Symbol Note: The electrical specifications apply in both polarities. T2-SL SO323- SO323- T24-SL Min. reakdown Voltage @ m V R 3.3 26.7 V orking Peak Voltage V wm 2.0 24.0 V Maximum lamping Voltage @ I P = V 9.0 43.0 V Typical lamping Voltage @ 8/20 µs @ I PP V 28.3 V @ 56.0 V @ 6 V Maximum Leakage urrent @ V M I n Typical apacitance @ 0 V, MHz J 3 p Unit * RoHS irective 2002/95/ Jan. 27, 2003 including annex and RoHS Recast 20/65/U June 8, 20. ** ourns considers a product to be halogen free if (a) the romine (r ) content is 900 ppm or less; (b) the hlorine ( l ) content is 900 ppm or less; and (c) the total romine (r) and hlorine ( l ) content is 500 ppm or less.
SO323-Txx-SL - TVS iode Series Performance Graphs Peak Pulse Power vs. Pulse Time 0,000 PPP Peak Pulse urrent (),000 350, 8/20 µs aveform 00 0 0. 0 00,000 0,000 td Pulse uration (µs) Pulse aveform IPP Peak Pulse urrent (% of IPP) 20 00 80 60 40 20 tt e t td = t IPP/2 0 0 5 0 5 20 25 30 t Time (µs) Test aveform Parameters tt = 8 µs td = 20 µs lock iagram IIRTIONL 2 How to Order ommon ode hip iode Package SO323 = SO-323 Package Model T = Transient Voltage Suppressor orking Peak Reverse Voltage 2 = 2 V RM (Volts) 24 = 24 V RM (Volts) Suffix = idirectional iode -SL = or use in VSL applications SO323 - T 2 - SL nvironmental Specifications Moisture Sensitivity Level.3 S lassification (HM)... 3
SO323-Txx-SL - TVS iode Series Product imensions This is a molded J SO-323 package with lead free 00 % Sn plating on the terminations. It weighs approximately 30 mg and has a flammability rating of UL 94V-0. Recommended ootprint L S L imensions (Nominal) L 0.80 (0.03) H S.40 (0.055) 0.50 (0.020) H J J imensions.60 -.90 (0.063-0.075).5 -.45 (0.045-0.057) 2.39-2.70 (0.094-0.06) 0.92 -.4 (0.036-0.045) 0.25-0.40 (0.00-0.06) 0.08-0.20 (0.003-0.008) 0.3 MX. (0.005).. 0.30-0.45 (0.02-0.08) Typical Part Marking IMNSIONS: (INHS) ach device has device marking outlined below. SO323-T2-SL.2 SO323-T24-SL..4 IMNSIONS: (INHS)
SO323-Txx-SL - TVS iode Series Packaging Information The surface mount product is packaged in an 8 mm x 4 mm tape and reel format per I-48 standard. P 0 P d Index Hole T 20 2 P Trailer evice Leader nd 0 pitches (min.) 0 pitches (min.) Start IMNSIONS: (INHS) irection of eed evices are packed in accordance with I standard RS-48-. Item Symbol SO-323 arrier idth arrier Length arrier epth Sprocket Hole Reel Outside iameter d.55 ± 0.0 (0.06 ± 0.004) 2.90 ± 0.0 (0.4 ± 0.004).35 ± 0.0 (0.053 ± 0.004).55 ± 0.05 (0.06 ± 0.002) 78 (7.008) Reel Inner iameter 80.0... (3.50) Min. eed Hole iameter 2 3.0 ± 0.20 (0.52 ± 0.008) Sprocket Hole Position Punch Hole Position Punch Hole Pitch P.75 ± 0.0 (0.069 ± 0.004) 3.50 ± 0.05 (0.38 ± 0.002) 4.00 ± 0.0 (0.57 ± 0.004) Sprocket Hole Pitch P 0 4.00 ± 0.0 (0.57 ± 0.004) mbossment enter P 2.00 ± 0.05 (0.079 ± 0.002) Overall Tape Thickness Tape idth T 0.20 ± 0.0 (0.008 ± 0.004) 8.00 ± 0.20 (0.35 ± 0.008) Reel idth 3.5. (0.53) Max. Quantity per Reel -- 3,000 RV. 0/7
Legal isclaimer Notice This legal disclaimer applies to purchasers and users of ourns products manufactured by or on behalf of ourns, Inc. and its affiliates (collectively, ourns ). Unless otherwise expressly indicated in writing, ourns products and data sheets relating thereto are subject to change without notice. Users should check for and obtain the latest relevant information before placing orders and should verify that such information is current and complete. The characteristics and parameters of a ourns product set forth in its data sheet are based on laboratory conditions, and statements regarding the suitability of products for certain types of applications are based on ourns knowledge of typical requirements in generic applications. The characteristics and parameters of a ourns product in a user application may vary from the data sheet characteristics and parameters due to a combination of the ourns product with other components in the user s application or due to the environment of the user application itself. Such characteristics and parameters also can and do vary in different applications and actual performance may vary over time. Users should always verify actual performance of the ourns product in their specific devices and applications, and make their own independent judgments about how much additional test margin to design in to compensate for differences between laboratory and real world conditions. Unless ourns has explicitly designated an individual ourns product as meeting the requirements of a particular industry standard (e.g., ISO/TS 6949) or a particular qualification (e.g., UL listed or recognized), ourns is not responsible for any failure of an individual ourns product to meet requirements of such industry standard or such particular qualification. Users of ourns products are responsible for ensuring compliance with safety-related requirements and standards applicable to their applications. ourns products are not recommended, authorized or intended for use in nuclear, lifesaving, life-critical or life-sustaining applications, nor in any other applications where failure or malfunction may result in personal injury, death, or severe property or environmental damage. Unless expressly and specifically approved in writing by two authorized ourns representatives on a case-by-case basis, use of any ourns products in such unauthorized applications is at the user s sole risk. Life-critical applications include devices identified by the U.S. ood and rug dministration as lass III devices and generally equivalent classifications outside of the United States. ourns standard products that are designed and tested for use in automotive applications will be described on the applicable data sheets as compliant with the applicable -Q standard. Unless expressly and specifically approved in writing by two authorized ourns representatives on a case-by-case basis, use of any other ourns standard products in an automotive application is not recommended, authorized or intended and will be at the user s sole risk. ourns standard products are not tested to comply with United States ederal viation dministration standards generally or any other generally equivalent governmental organization standard applicable to products designed or manufactured for use in aircraft or space applications. ourns standard products that are designed and tested for use in aircraft or space applications will be described on the applicable data sheets as compliant with the RT O-60 standard. Unless expressly and specifically approved in writing by two authorized ourns representatives on a case-by-case basis, use of any other ourns standard product in an aircraft or space application is not recommended, authorized or intended and will be at the user s sole risk. The use and level of testing applicable to ourns custom products shall be negotiated on a case-by-case basis by ourns and the user for which such ourns custom products are specially designed. bsent a written agreement between ourns and the user regarding the use and level of such testing, the provisions above applicable to ourns standard products shall also apply to such ourns custom products. Users shall not sell, transfer, export or re-export any ourns products or technology for use in activities which involve the design, development, production, use or stockpiling of nuclear, chemical or biological weapons or missiles, nor shall they use ourns products or technology in any facility which engages in activities relating to such devices. The foregoing restrictions apply to all uses and applications that violate national or international prohibitions, including embargos or international regulations. urther, ourns products, technology or technical data may not under any circumstance be exported or re-exported to countries subject to international sanctions or embargoes, and ourns products may not, without prior authorization from ourns and/or the U.S. Government, be resold, transferred, or re-exported to any party not eligible to receive U.S. commodities, software, and technical data. To the maximum extent permitted by applicable law, ourns disclaims (i) any and all liability arising out of the application or use of any ourns standard product, (ii) any and all liability, including, without limitation, special, punitive, consequential or incidental damages, and (iii) any and all implied warranties, including implied warranties of fitness for particular purpose, non-infringement and merchantability. or your convenience, copies of this Legal isclaimer Notice with German, Spanish, Japanese, Traditional hinese and Simplified hinese bilingual versions are available at: eb Page: http://www.bourns.com/legal/disclaimers-terms-and-policies P: http://www.bourns.com/docs/legal/disclaimer.pdf 753 0/8/7