A ree Project Sheet NOT OR RSAL Spring as Sprung QULT 1 eaturing fabrics from the Spring as Sprung collection by Sharla ults for abric Requirements (A) 3900P-10... 1 panel () 3904-22... ½ yard () 3904-60... ⅛ yard () 3905-1... ⅛ yard () 3902-1... ⅛ yard () 3907-10... ⅛ yard () 3905-11... ⅛ yard () 1351-rape**... ⅞ yard* () 1351-Pigment White** ⅞ yard () 3901-10... 1 ⅔ yards acking 3902-50... 3 ½ yards *ncludes inding **ust olor! ollection Additional Supplies Needed atting 61 x 69 (Recommended: Air Lite olor Me 100% otton) Piecing and sewing thread Quilting and sewing supplies Quilt designed by eidi Pridemore inished Quilt Size 53 x 60 ½ Skill Level: eginner
STUO e PROTS Page 2 of 5 utting utting nstructions Please note: All strips are cut across the width of fabric (WO) from selvage to selvage edge unless otherwise noted. WO= Width of abric LO = Length of abric abric A (3900P-10 36 appy Spring Panel Multi): ussy cut (1) 35 ½ x 43 panel. abric (3904-22 uzzing ees Pink), cut: (5) 2 x WO Sew the strips together end to end with diagonal seams and cut (2) 2 x 43 strips and (2) 2 x 38 ½ See instructions to cut (4) eggs. abric (3904-60 uzzing ees reen): abric (3905-1 hicks and ggs White): abric (3902-1 ecorative ggs White): abric (3907-10 elly eans Multi): abric (3905-11 hicks and ggs lue): See instructions to cut (4) eggs. abric (1351-rape ust olor! rape), cut: (3) 1 ½ x WO Sew the strips together end to end with diagonal seams and cut (2) 1 ½ x 53 (3) 1 ½ x WO Sew the strips together end to end with diagonal seams and cut (2) 1 ½ x 47 ½ (6) 2 ½ x WO strips for the binding. abric (1351-Pigment White ust olor! Pigment White), cut: (3) 4 ½ x WO Sew the strips together end to end with diagonal seams and cut (2) 4 ½ x 45 (3) 4 ½ x WO Sew the strips together end to end with diagonal seams and cut (2) 4 ½ x 45 ½ abric (3901-10 Spring unnies Multi), cut: (2) 3 ½ x 55 LO (2) 3 ½ x 53 ½ WO strips from the remaining fabric, piece as needed. acking (3902-50 ecorative ggs Lilac), cut: (2) 61 x WO Sew the strips together and trim to 61 x 69 for the back.
STUO e PROTS Page 3 of 5 Sewing Sew using a ¼ seam allowance with right sides together (RST) unless otherwise indicated. Always press towards the darker fabric while assembling, unless otherwise noted by the arrows. lock Assembly 1. Sew (1) 2 x 43 abric strip to each side of the 35 ½ x 43 abric A panel. Sew (1) 2 x 38 ½ abric strip to the top and to the bottom of the abric A panel. Trim the block to measure 37 ½ x 45 to make the enter lock (ig. 1). A 2. ollowing the manufacturer s instructions, trace the listed number of each template onto the paper side of the fusible web. Roughly cut out each template about 1/8 outside the drawn lines. 3. Press each template onto the wrong side of the fabrics as listed on the templates. ut out each template on the drawn lines. Trim to measure 37 ½ x 45 after the borders are added ig. 1 4. Refer to the igure 2 to arrange and press (7) assorted eggs onto (1) 4 ½ x 45 ½ abric strip. 5. inish the raw edges of each shape with a decorative stitch such as a buttonhole or satin stitch to make the Top order. 6. Repeat Steps 4-5 and use igure 3 for fabric identification and location to make (1) ottom order (ig. 3). ig. 2 Top order ottom order ig. 3
STUO e PROTS Page 4 of 5 7. Refer to igure 4 and repeat Steps 4-5, using (1) 4 ½ x 45 abric strip and (7) assorted eggs to make the Left Side order. 8. Refer to igure 5 and repeat Steps 4-5, using (1) 4 ½ x 45 abric strip and (7) assorted eggs to make the Right Side order. Quilt Top Assembly (ollow the Quilt Layout while assembling the quilt top.) 9. Sew the Left and Right Side orders to the enter lock. Sew the Top and ottom orders to the enter lock. 10. Sew (1) 1 ½ x 53 abric strip to each side of the enter lock. Sew (1) 1 ½ x 47 ½ abric strip to the top and to the bottom of the enter lock. 11. Sew (1) 3 ½ x 55 abric strip to each side of the enter lock. Sew (1) 3 ½ x 53 ½ abric strip to the top and to the bottom of the enter lock to make the quilt top. Layering, Quilting and inishing 12. Press the quilt top and 61 x 69 backing well. Layer backing (wrong side up), batting, pressed quilt top (right side up) and baste. Quilt as desired and trim excess batting and backing when quilting is complete. Left Side order Right Side order inding 13. ut the ends of the (6) abric binding strips at a 45-degree angle and sew end to end to make (1) continuous piece of binding. old in half lengthwise and press wrong sides together. ig. 4 ig. 5 14. Sew the binding to the front of the quilt, raw edges together. Turn the folded edge to the back, and hand stitch in place. gg Template Trace 28 (4) abric (5) abric (5) abric (5) abric (5) abric (4) abric
STUO e PROTS Page 5 of 5 Quilt Layout very effort has been made to ensure that all projects are error free. All the information is presented in good faith, however no warranty can be given nor results guaranteed as we have no control over the execution of instructions. Therefore, we assume no responsibility for the use of this information or damages that may occur as a result. When errors are brought to our attention, we make every effort to correct and post a revision as soon as possible. Please make sure to check for pattern updates prior to starting the project. We also recommend that you test the project prior to cutting for kits. inally, all free projects are intended to remain free to you and are not for resale. 2017 Studio e abrics