Shaping the Experience of Light QUADRA EXTERIOR PATHWAY www.insightlighting.com 1
CONTENTS QUADRA PRODUCT SPECIFICATIONS QUADRA ORDERING INFORMATION 9 QUADRA MOUNTING & DIMENSIONS 10-11 QUADRA ACCESSORY DIMENSIONS 12-1
EXTERIOR LED PATHWAY LIGHTING Insight is excited to introduce QUADRA; the new standard for high performance LED pathway lighting! Constructed of extruded and die cast aluminum, QUADRA is a fully sealed, IP 65 listed exterior fixture that is both stylish and built for today s demanding exterior environments. Designed for optimized lighting performance and International Dark Sky Association Guidelines. The QUADRA includes a recessed housing for stud, brick or concrete poured walls, a sealed module with plug and play disconnects, and a choice of faceplate options including louver, visor or simple slotted opening. Quadra is available in nominal lengths of 12, 24 and 6, and is offered in static white, static color and RGB color changing options. QUADRA means versatility, integrity of design, low maintenance and enhanced performance. Investigate the new benchmark in pathway lighting: QUADRA by Insight! Shaping the Experience of Light
Abbotts Creek Community College - Raleigh, NC Architect: Clark Nexsen Photography: Brett Osborn, Clear Sky Images 4 www.insightlighting.com
www.insightlighting.com 5
Venice Island Performing Arts & Recreation Center - Philadelphia, PA Architect: Buell Kratzer Powell Photography: Jonathon Kolbe 6 www.insightlighting.com
www.insightlighting.com 7
Specifications SPECIFICATION OPTICS LED COLOR/CCT ASYMMETRIC 2700K, 000K, 500K, 4000K, static red, static green, static blue, static amber RGB Color Changing Color temperature conforms to ANSI C7 77A 4000K, 9 Fixture OUTPUT LUMENS & EFFICACY WATTAGE 12W LUMENS 600 lm EFFICACY (lm/w) 16.5 lm/w ELECTRICAL LUMEN MAINTENANCE POWER SUPPLY L70 AT 25 C, MINIMUM 75,000 HOURS Integral within the fixture housing INPUT VOLTAGE 120V to 277V PHYSICAL HOUSING A recessed rough-in box, constructed of extruded aluminum and die cast end caps A temporary cover is factory installed on the rough-in box which can be pre-shipped for installation Powder-coat painted finish LENS White light & static colors: Unshielded, clear tempered glass lenses are standard for white light Optional White Translucent (WL) lenses are suitable for direct view applications RGB Color Changing: Unshielded, white translucent tempered glass lenses are standard for RGB color changing CERTIFICATION ETL and cetl approved for Wet Location RoHS COMPLIANT WARRANTY 5 YEAR Limited Lumen measurement tested in accordance with IES LM-79-0 www.insightlighting.com
Ordering Information PREFIX WATTAGE WATTS /FT LED COLOR/CCT MOUNTING FIXTURE LENGTH VOLTAGE/ WIRING METHOD FINISH OPTIONS WHITE LIGHT & STATIC COLORS QD QUADRA 6 12 27K = 2700K 0K = 000K 5K = 500K 40K = 4000K R = Red G = Green B = Blue A = Amber SW = Stud Wall BW = Brick Wall CW = Concrete Wall 15 27 9 INT1 = 120V Integral Power Supply INT2 = 277V Integral Power Supply Thru-Wiring is available. Contact factory for details. TW = Textured White TBL = Textured Black TBR = Textured Bronze TLB = Textured Light Bronze TN = Textured Natural TS = Textured Sandstone CC = Custom Color Contact factory. Additional charges may apply. LV = Louver VS = Visor WL = White Translucent Lens (Suitable for direct view applications) CRF = Corrosion Resistant Finish Corrosion resistant finish is recommended for coastal or extreme exterior environments Please contact factory for controls and programming assistance. RGB COLOR CHANGING QD QUADRA 6 RGB = RGB Color Changing All RGB Color Changing products require a DMX programmer for proper mixing. Must order separately. One LPT is required for field re-addressing of factory DMX settings. See below. SW = Stud Wall BW = Brick Wall CW = Concrete Wall 15 27 9 INT1 = 120V Integral Power Supply INT2 = 277V Integral Power Supply Thru-Wiring is available. Contact factory for details. TW = Textured White TBL = Textured Black TBR = Textured Bronze TLB = Textured Light Bronze TN = Textured Natural TS = Textured Sandstone CC = Custom Color Contact factory. Additional charges may apply. LV = Louver VS = Visor CRF = Corrosion Resistant Finish Corrosion resistant finish is recommended for coastal or extreme exterior environments Please contact factory for controls and programming assistance. www.insightlighting.com 9
Mounting & Dimensions Plaster Sheathing Face Plate 2X 1/2 NPT Holes Stucco Stop 4X Luminaire Mounting Brackets STUD WALL MOUNT 2 X 6 Brick Face Face Plate Sheathing 2X Luminaire Mounting Brackets 2X 1/2 NPT Holes BRICK WALL MOUNT Concrete Face Plate 2X Luminaire Mounting Brackets 2X 1/2 NPT Holes CONCRETE WALL MOUNT 10 www.insightlighting.com
Ordering Information Active White & Color Changing Standard Unshielded 5 7 4 6 5 B A 1-1/2 LUMINOUS APERTURE OPENING UNSHIELDED C Optional Louver (LVR) 5 4 5 6 4 B A 1 5 LUMINOUS APERTURE OPENING W/ LVR 4 C 1 5 1 7 Optional Visor (VS) 5 4 B 5 7 4 6 5 A C 1 1 4 LUMINOUS APERTURE OPENING W/ VISOR 1 7 1 Nominal Fixture Length Dim. A Dim. B Dim. C 15 15-7/ 11-5/ 15 27 27-7/ 2-5/ 27 9 9-7/ 5-5/ 9 www.insightlighting.com 11
Shaping the Experience of Light QUADRA TM EXTERIOR LED PATHWAY LIGHTING QUADRA_05-25-16