n Y-Design n range DC to n Impedance n Small dimensions (x7.6x.6mm) n form C contact ( changeover contact) n Immersion cleanable n Low power consumption ( 4mW) Typical applications Cable modems and linecards CATV, Tabs, measurement and test equipment ATE, satellite audio video tuners, wireless base stations and antennas, power stages Contact Contact arrangement Max. switching voltage Rated current Limiting continuous current, 2 C Switching power form C, CO 22VDC, 2VAC 2A 2A 6W, 62.VA, W (2.) Max. Continuos RF-Power, at 2 C., VSWR <.2 W @ ) W @ 2 ) Breaking capacity max. W ) Contact material Ag, Au covered Minimum switching voltage µv Initial contact resistance <m at mamv Operate time typ. ms, max. ms Release time without diode in parallel typ. 2ms, max. ms with diode in parallel typ. 4ms, max. 6ms Bounce time max. typ. ms, max. ms Duration of setreset pulse min. 2ms Mechanical endurance 7 operations ) with appropriat cooling only Coil (continued) Coil versions, bistable Coil Rated Set Limiting Reset Coil Rated coil code voltage voltage voltage voltage resistance power VDC VDC VDC VDC ±% mw version, bistable, coil 7S.. -. 7 7 version, bistable, 2 coils 9S 2.2 6. 2.2 64 4 92S 4..8 9.8.8 4 4 9S..9. 78 4 9S 9 6. 9.6 6. 74 4 96S 2 9. 26. 9. 28 4 version, bistable, 2 coils 4S 2.2 6. 2.2 64 4 42S 4..8 9.8.8 4 4 4S..9. 78 4 46S 2 9. 26. 9. 28 4 All figures are given for coil without pre-energization, at ambient temperature +2 C. Coil operating Range Coil Coil voltage range to 24VDC Coil versions, monostable Coil Rated Operate Limiting Release Coil Rated coil code voltage voltage voltage voltage resistance power VDC VDC VDC VDC ±% mw version, monostable, coil S 2.2 6.. 64 4 2S 4..8 9.8.4 4 4 S..9. 78 4 S 9 6. 9.6.9 74 4 6S 2 9. 26..2 28 4 7S 24 8. 4 mw 2. 2.4 44 4 7 mw version, monostable, coil S 2.2 6.. 64 4. 2S 4..8 9.8.4 4 4 S..9. 78 4 S 9 6. 9.6.9 74 4 2. 6S 2 9. 26..2 28 4 All figures are given for coil without pre-energization, at ambient temperature +2 C. 2 Coil Voltage [UU nom ] Coil Voltage [UU nom ]. U nom. nominal coil voltage Uop. min. Urel. min. Umax. at A U nom. nominal coil voltage U nom. nominal coil voltage Umax. at A 4 mw 7 mw. Uop. min. 6-2, Rev. 6 U nom 2 Tyco Electronics Corporation, U max. sheets and product specification = Nominal according coil to voltage IEC 68- and to be used = Upper only limit together of with the the operative Definitions range section. of the coil voltage (limiting voltage) U op. min. = Lower limit of the operative range of the coil voltage (reliable operate voltage) For latching relays U set min. resp. U reset min. sheets and product data is subject to the http:relays.te.comdefinitions - -4 - -2 - - 2 4 6 8 9 2 sheets, product data, Definitions section,
RF Signal s 8-982 8-982 Rev. Rev. D D Signal Signal ands RF s S (Continued) 8-982 8-982 Rev. D Rev. D SignalSignal ands RF s Insulation version version SignalSignal and s RF s Initial dielectric strength Other 8-982 8-982 Rev. DRev. D Material compliance: EU RoHSELV, China RoHS, REACH, Halogen content refer to the Product Compliance Support Center at customersupportrohssupportcenter Ambient temperature - C to +8 C Thermal resistance <6KW -8dB -8dB -db -db -8dB -8dB -db -db Category of environmental protection -.db -.db -.2dB -.2dB -.db -.db -.db -.db -.2dB -.2dB -.db -.db IEC 68 RT III - wash tight. of. 67, immersion Degree protection, IP cleanable...2.2iec 629...2.2.. Vibration g, to Hz -8dB resistance -8dB -db (functional) -db -8dB -8dB -db -db Shock resistance (functional), half sinus ms g -.db -.db -.2dB -.2dB -.db -.db -.db -.db -.2dB -.2dB -.db -.db Shock resistance (destructive), half sinus.ms g type.2.....2.2...2 SMT.. Terminal -8dB -8dB -db -db -8dB max. -8dB g -db -db Weight Resistance to soldering heat SMT Peak Value -.db -.db -.db -.2dB -.2dB -.db -.db -.db -.db -.2dB -.2dB -.db 668-2-8 2 Cs.Moisture. IEC...2.2...2.2.. sensitive level, JEDEC J-Std-2D MSL Ultrasonic not recommended cleaning Packagingunit, SMT reel2 pcs., box2 pcs. between open contacts 6Vrms between contact and coil Vrms surge withstand voltage RF Initial RF between open contacts V at at 9 9 between contact and coil V at at 9 9 RF RF at at 9 9 RF at at 9 9 at at 9 9 96dB8dB at 9 9dB8dB RF RF at at 9 db 9 at db at at 9 9 loss at 9.dB.2dB at at 9 9.dB.2dB at.db.db at at 9 9 Voltage standing wave ratio (VSWR) at 9-2 -2..2. [db] -2-6 -4-8 -4-8 [db] -2-6 -2-6 - -4-8 -2-8 -2-6 - 2 2 2 2 2 2 2 2 2 [] [] - -. -2. -2 [] [] 2 2 2 -loss [db]-loss [db]-loss [db] -.2 -.. -. -.2 -. -. -.2 -. -2-6 -4-8 -4-8 -2-6 - -2-6 - -6 - - 2 2 2 2 2 2 2 2 2 2 2 2 [] [] - -2-2.. [] []. -.. 2 2 2 2 2 2 2 2 [] [] -. -. -.2 -. 2 2 2 2 [] []..4.2..4..2. -8-2 -...4 -.4.2..4 [] [] -6 -..2. -.2 -. -.4 -.4 -. -. -.2 -.2 -.4 -.4 -. -. 2 2 2 2 2 2 2 2 2 2 2 2 [] [] [] [] [] []..4 -.2 -.2 -.4 -.4 -. -. -4-8 -2. -.4 -.4 -. -. -.2 -.2.4 -.4 -. -. -.. -.2 -.. -4-2 -6-8 -2-8 -2-2 RF performance, Ω version -4-8 -2 [] [] -loss [db]-loss [db] -loss [db] -2-4 -8-2 -.. -4-2 -6 - -6 - -4 RF performance, Ω version [db] [db] [db] [db] -4...2 -.4 -.4.4.4 [] []...4.4.2.2...4.4...2.2........2.2 2 2 2 2 [] [] 2..2 6-2, Rev. 6 sheets 2 and 2 product 2 specification 2 [] according [] to IEC 68- and to be used 2 Tyco Electronics Corporation,. 2 2 2 2 2 2 2 2 [] [].2......... 2 2 2 2 2 2 2 2.. sheets and product data is subject to the sheets, product data, Definitions sec [] [] tion,.. http:relays.te.comdefinitions [] [] All specifications All specifications subject subject to change. to change. Consult Consult TycoTyco Electronics Electronics for latest for latest specifications. specifications. [] [] 8 of82 of 2
(Continued) Terminal assignment TOP view on component side of PCB Monostable Bistable, coil Bistable, 2 coils + set - - reset + 22 2 2 9 8 7 6 4 2 Contacts are shown in reset condition. Contact position might change during transportation and must be reset before use. 2 4 6 7 8 9 + reset - - set + PCB layout TOP view on component side of PCB version version THIS DRAWING IS A CONTROLLED DOCUMENT. THIS DRAWING IS A CONTROLLED DOCUMENT. Dimensions version LOC DIST HJ - REVISIONS P LTR DESCRIPTION DATE DWN APVD E New Coplanarity, Solder Pad Layout JAN2 UKo HD F Printing 9JUL2 UKo HD F REVISED PER ECO-- 2MAR2 RK HMR F2 REVISED PER ECO--772 (ECR--964) 4JUN2 UKo AK version LOC DIST HJ - REVISIONS P LTR DESCRIPTION DATE DWN APVD E New Coplanarity, Solder Pad Layout JAN2 UKo HD F Printing 9JUL2 UKo HD F REVISED PER ECO-- 2MAR2 UKo AK F2 REVISED PER ECO--964 8JUN2 UKo AK 4.9 +. -. 7. +. -. A 4.9 +. -. 7. +. -. A 26 4 4.9 +.. +. 26 4 4 RELEASED FOR PUBLICATION ALL RIGHTS RESERVED..9 +.. +. 8.6 +. -. Coplanarity<=.mm.8 +. -..8 +. -. 2.4 +. -..8.8 +. -. 6 +. -..8 +. -..8 2.4 +. -..4. 4.9 6.7 9.4 +.2 -.2. A.9.9 7.2.. 22 2 2 9.9 7.9 4 2.7.4 RELEASED FOR PUBLICATION ALL RIGHTS RESERVED. 8.6 +. -. Coplanarity<=.mm.8 +. -..8 +. -. 2.4 +. -...8 +. -. 6 +. -..8 +. -..8 2.4 +. -..4. 4.9 6.7 9.4 +.2 -.2. A.6.9 7.2.. 22 2 2 9.9 7.6 4 2.7.4 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 26 BY TE Connectivity..8.8.27 +. -. XX = type zz = nominal voltage.8 +. -..27 +. -..8 +. -. 6. +. -. 6. +. -. 6-2, YYWW Rev. 6 = Date code NNNN = Lot number 2 DIMENSIONS: Tyco Electronics DWN Corporation, a TE Connectivity mm Ltd. company CHK. 7 6.27 2.4.9..9 2.2 2 6 7.7..9 sheets and product specification according to IEC 68- and to be used only together with the Definitions FINISH section. 26JAN27 MATERIAL UKo 99 - - 26JAN27 HD 92 TOLERAES UNLESS OTHERWISE SPECIFIED: APVD 26JAN27 TE Connectivity DIN 768-m HD 92 PRODUCT SPEC PLC - NAME PLC - - - metal cover 2 PLC -. 7.6 housing THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 26 BY TE Connectivity..8..27 +. -. XX = type zz = nominal voltage.8 +. -..27 +. -..8 +. -. 6. +. -. 6. +. -. sheets YYWW and product = Date code data is subject to the terms of the NNNN disclaimer = Lot number and all chapters of the Definitions DIMENSIONS: section, available DWN at http:relays.te.comdefinitions mm. 7 6.27 2.4.9.6 2.2 2 6 7..9.. sheets, product data, Definitions section, are MATERIAL subject to change. FINISH UKo 99 6V26 - - CHK 6V26 HD 92 TOLERAES UNLESS 6V26 TE Connectivity APVD OTHERWISE SPECIFIED: DIN 768-m HD 92 PRODUCT SPEC PLC - NAME - - - metal cover PLC 2 PLC -. 7.6 housing
(Continued) Processing Packing Tape and reel for SMT Resistance to soldering heat Infrared soldering temperaturetime profile (lead and housing peak temp.) Temperature [ C] Time [s] Reel dimensions Recommended soldering conditions Vapour phase soldering 2 to 4s 24 C full line: typical dotted line: process limits Temperature [ C] 8 C C external preheating C forced cooling Vapour phase soldering temperaturetime profile (lead and housing peak temp.) Time [s] 4 6-2, Rev. 6 2 Tyco Electronics Corporation, sheets and product specification according to IEC 68- and to be used sheets and product data is subject to the http:relays.te.comdefinitions sheets, product data, Definitions section,
(Continued) Product code structure Typical product code S Type Coil Type s S Series form C, CO Coil code: please refer to coil versions table Performance type x version, monostable coil x version, monostable coil 7x version, bistable coil 2x version, bistable coil 9x version, bistable 2coils 4x version, bistable 2coils S performance shielded Product code Arrangement Version Coil Coil Type Part number S form C ( CO) ohm VDC Monostable 2-462- S 9VDC 4-462- 6S 2VDC -462-7S 24VDC 2-462-2 92S 4.VDC Bistable 2 coils 2-462- 9S VDC 2-462-4 9S 9VDC 4-462- 9S 9VDC 4-462- S ohm VDC Monostable 2-462-2 S 9VDC -462-6S 2VDC -462-7 4S VDC Bistable 2 coils -462-2 42S 4.VDC -462- This list represents the most common types and does not show all variants covered by this data sheet. 6-2, Rev. 6 2 Tyco Electronics Corporation, sheets and product specification according to IEC 68- and to be used sheets and product data is subject to the http:relays.te.comdefinitions sheets, product data, Definitions section,