MMSZxxxETG Series, SZMMSZxxxETG Series Zener Voltage Regulators mw SOD Surface Mount Three complete series of Zener diodes are offered in the convenient, surface mount plastic SOD package. These devices provide a convenient alternative to the leadless package style. Specification Features mw Rating on FR or FR Board Wide Zener Reverse Voltage Range. V to V Package Designed for Optimal Automated Board Assembly Small Package Size for High Density Applications ESD Rating of Class (> kv) per Human Body Model Peak Power W ( X s) AEC Q Qualified and PPAP Capable SZ Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements Pb Free Packages are Available* Mechanical Characteristics CASE: Void-free, transfer-molded, thermosetting plastic case FINISH: Corrosion resistant finish, easily solderable MAXIMUM CASE TEMPERATURE FOR SOLDERING PURPOSES: C for Seconds POLARITY: Cathode indicated by polarity band FLAMMABILITY RATING: UL 9 V MAXIMUM RATINGS Rating Symbol Max Unit Peak Power Dissipation @ s (Note ) @ T L C Total Power Dissipation on FR Board, (Note ) @ T L = 7C Derated above 7C Thermal Resistance, Junction to Ambient (Note ) Thermal Resistance, Junction to Lead (Note ) P pk P D.7 W mw mw/c R JA C/W R JL C/W Junction and Storage Temperature Range T J, T stg to + C Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability.. Nonrepetitive current pulse per Figure. FR =. X. inches, using the ON minimum recommended footprint. Thermal Resistance measurement obtained via infrared Scan Method Cathode SOD CASE STYLE Anode MARKING DIAGRAM xxx = Device Code M = Date Code = Pb Free Package (Note: Microdot may be in either location) ORDERING INFORMATION Device Package Shipping MMSZxxxETG SZMMSZxxxETG MMSZxxxETG xxx M SOD (Pb Free) SOD (Pb Free) SOD (Pb Free), / Tape & Reel, / Tape & Reel, / Tape & Reel For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD/D. DEVICE MARKING INFORMATION See specific marking information in the device marking column of the Electrical Characteristics table on page of this data sheet. *For additional information on our Pb Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. Semiconductor Components Industries, LLC, January, Rev. 7 Publication Order Number: MMSZVET/D
MMSZxxxETG Series, SZMMSZxxxETG Series ELECTRICAL CHARACTERISTICS (T A = C unless otherwise noted, V F =.9 V Max. @ I F = ma) Symbol Parameter I F I V Z Reverse Zener Voltage @ I ZT I ZT Reverse Current Z ZT I R Maximum Zener Impedance @ I ZT Reverse Leakage Current @ V R V Z V R I R V F I ZT V V R Reverse Voltage I F Forward Current V F Forward Voltage @ I F Zener Voltage Regulator ELECTRICAL CHARACTERISTICS (T A = C unless otherwise noted, V F =.9 V Max. @ I F = ma) V Z (V) (Notes and ) Z ZT (Note ) V Z (V) (Notes and ) Z ZT (Note ) Max Reverse Leakage Current Device* MMSZVETG MMSZV7ETG MMSZVETG MMSZVETG MMSZVETG Device Marking CL CL CL CL CL @ I ZT = ma @ I ZT = ma I R @ V R Min Nom Max Min Max A V..7.....7.......7.7 9 9.7.9...7...7.9. MMSZV9ETG MMSZVETG MMSZV7ETG MMSZVETG MMSZVETG CL CL7 CL CL9 CM.7.9.7...9..7.....9...9..7.....7.. MMSZVETG MMSZVETG MMSZ7VETG MMSZVETG MMSZ9VETG CM CM CM CM CM.9. 7. 7.79... 7.. 9.. 7. 7.. 9....9 7... 7. 7.9.7 9..7. MMSZETG MMSZETG MMSZETG MMSZETG MMSZETG CM7 CM CM9 CN CN 9..........7 9.....7...7.. 7.... 7. MMSZETG MMSZETG MMSZETG MMSZETG MMSZETG CN CN CN CN CN7. 7. 9......... The type numbers shown have a standard tolerance of % on the nominal Zener Voltage.. Tolerance and Voltage Designation: Zener Voltage (VZ) is measured with the Zener Current applied for PW = ms.. Z ZT and Z ZK are measured by dividing the AC voltage drop across the device by the AC current applied. The specified limits are for I Z(AC) =. I Z(DC), with the AC frequency = khz. Devices listed in bold, italic are ON Semiconductor Preferred devices. Preferred devices are recommended choices for future use and best overall value. *Include SZ-prefix devices where applicable. 7..7.7.7.7 7. 9........
MMSZxxxETG Series, SZMMSZxxxETG Series ELECTRICAL CHARACTERISTICS (T A = C unless otherwise noted, V F =.9 V Max. @ I F = ma) V Z (V) (Notes 7 and ) Z ZT (Note 9) V Z (V) (Notes 7 and ) Z ZT (Note 9) Max Reverse Leakage Current Device* MMSZ7ETG MMSZETG MMSZETG MMSZETG MMSZ9ETG Device Marking CN CN9 CP CP CP @ I ZT = ma @ I ZT =. ma @ I ZT =. ma I R @ V R Min Nom Max Min Max A V.... 7. 7 9... 7..9 7....7.9.9.. 7. MMSZETG MMSZ7ETG MMSZETG MMSZETG CP CP CP CP7.... 7. 9... 7. The type numbers shown have a standard tolerance of % on the nominal Zener Voltage.. Tolerance and Voltage Designation: Zener Voltage (VZ) is measured with the Zener Current applied for PW = ms. 9. Z ZT and Z ZK are measured by dividing the AC voltage drop across the device by the AC current applied. The specified limits are for I Z(AC) =. I Z(DC), with the AC frequency = khz. Devices listed in bold, italic are ON Semiconductor Preferred devices. Preferred devices are recommended choices for future use and best overall value. *Include SZ-prefix devices where applicable. 7 9.7.7 7.. 7 7..9.7 9.
MMSZxxxETG Series, SZMMSZxxxETG Series TYPICAL CHARACTERISTICS VZ, TEMPERATURE COEFFICIENT (mv/ C) 7 TYPICAL T C VALUES FOR MMSZxxxTG SERIES, SZMMSZxxxTG SERIES 7 V Z @ I ZT 9 VZ, TEMPERATURE COEFFICIENT (mv/ C) TYPICAL T C VALUES FOR MMSZxxxTG SERIES, SZMMSZxxxTG SERIES V Z @ I ZT Figure. Temperature Coefficients (Temperature Range C to +C) Figure. Temperature Coefficients (Temperature Range C to +C) PD, POWER DISSIPATION (WATTS)...... P D versus T L P D versus T A 7 T, TEMPERATURE (C) Ppk, PEAK SURGE POWER (WATTS). RECTANGULAR WAVEFORM, T A = C PW, PULSE WIDTH (ms) Figure. Steady State Power Derating Figure. Maximum Nonrepetitive Surge Power ZZT, DYNAMIC IMPEDANCE ( ) I Z = ma ma ma T J = C I Z(AC) =. I Z(DC) f = khz V Z, NOMINAL ZENER VOLTAGE IF, FORWARD CURRENT (ma). C. 7 V (MMSZ7BTG) 9 V (MMSZ7BTG) 7C C C..7..9. V F, FORWARD VOLTAGE (V).. Figure. Effect of Zener Voltage on Zener Impedance Figure. Typical Forward Voltage
MMSZxxxETG Series, SZMMSZxxxETG Series TYPICAL CHARACTERISTICS C, CAPACITANCE (pf) V BIAS V BIAS BIAS AT % OF V Z NOM T A = C I R, LEAKAGE CURRENT ( A)... +C +C. C. 7 Figure 7. Typical Capacitance Figure. Typical Leakage Current T A = C T A = C I Z, ZENER CURRENT (ma). I Z, ZENER CURRENT (ma).. V Z, ZENER VOLTAGE (V). 7 V Z, ZENER VOLTAGE (V) Figure 9. Zener Voltage versus Zener Current (V Z Up to V) Figure. Zener Voltage versus Zener Current ( V to 9 V) % OF PEAK PULSE CURRENT 7 t r t P PEAK VALUE I RSM @ s PULSE WIDTH (t P ) IS DEFINED AS THAT POINT WHERE THE PEAK CURRENT DECAY = s HALF VALUE I RSM / @ s t, TIME (s) Figure. s Pulse Waveform
MMSZxxxETG Series, SZMMSZxxxETG Series PACKAGE DIMENSIONS SOD CASE ISSUE G H E D ÂÂÂÂ b E C A A L NOTES:. DIMENSIONING AND TOLERANCING PER ANSI Y.M, 9.. CONTROLLING DIMENSION: INCH. MILLIMETERS DIM MIN NOM MAX A.9.7..7 A... b...7. c --- ---. D... E..9.. H E.... L. --- ---. STYLE : PIN. CATHODE. ANODE INCHES MIN NOM MAX..... --- ---.....7.. --- --- --- --- SOLDERING FOOTPRINT*.9.....9.9. SCALE : mm inches *For additional information on our Pb Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Typical parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typicals must be validated for each customer application by customer s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box, Denver, Colorado 7 USA Phone: 7 7 or Toll Free USA/Canada Fax: 7 7 or 7 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 9 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 7 Japan Customer Focus Center Phone: 7 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative MMSZVET/D