Low-temperature Operation for Applications in Cold-storage Warehouses

Compact Photoelectric Sensor with Built-in Amplifier EZ CSM_EZ_DS_E_8_2 The Standard for Photoelectric Sensors with a Secure Track Record of One Million Sold early. Long sensing distance of m for Through-beam Models, m for Retro-reflective Models, and m for Diffuse-reflective Models. Mechanical axis and optical axis offset of less than ±2.5 simplifies optical axis adjustment. High stability with unique algorithm that prevents interference of external light. For the most recent information on models that have been certified for safety standards, refer to your OMRON website. Features Industry's Top-level Sensing Distance with Built-in Amplifier A separately sold filter is available to prevent mutual interference for Through-beam Models with red lights sources and a sensing distance of m. Reflective Models include functionality to prevent mutual interference (up to 2 sensors). Long-distance, Through-beam Sensors with a detection distance of m (response time: 2 ms) are also available. Be sure to read Safety Precautions on page. Through-beam m Retro-reflective with MSR function m Diffuse-reflective m Distance-settable 2 cm Low-temperature Operation for Applications in Cold-storage Warehouses A wider ambient operating range from to 55 C (main models with connectors). We also provide Sensor I/O Connectors with PUR Cables for high resistance to cold environments. Improved Matching of Optical Axis and Mechanical Axis for Through-beam Models and Retro-reflective Models The offset between the optical axis and the mechanical axis is kept within ±2.5, so the optical axis can be accurately set simply by mounting the Sensor according to the mechanical axis. Sensor Protection against Incorrect Wiring The Sensor includes output reverse polarity protection. (A diode to protect against reverse polarity is added to the output line.) Complete Compliance with the EU's RoHS Directive Lead, mercury, cadmium hexachrome, polybrominated biphenyl (PBB), and polybrominated diphenyl ether (PBDE) have all been eliminated. Also, burnable polyethylene packaging has been used. m mechanical 2.5 max. axis Optical axis The receiver will always be in the range of light diffusion. Through-beam Model receivers and Reflective Models (except the EZ-LS) Operation Stability (green) Photoelectric Sensor main circuit Brown ma max. Black ZD Blue Protection for NPN output models Pb 2 to 2 VDC Load (relay) V eco Phone: 8.89.2 - Fax: 888.72.77 - Web: www.clrwtr.com - Email: info@clrwtr.com

Ordering Information EZ Sensors [Refer to Dimensions on page.] Red light Infrared light Sensing method Appearance Connection method Sensing distance Model NPN output PNP output EZ-T6 2M * *5 EZ-T8 2M * *5 Pre-wired (2 m) Emitter EZ-T6-L 2M Emitter EZ-T8-L 2M Receiver EZ-T6-D 2M Receiver EZ-T8-D 2M 5 m EZ-T66 EZ-T86 Standard M8 connector Emitter EZ-T66-L Emitter EZ-T86-L Receiver EZ-T66-D Receiver EZ-T86-D EZ-T6A 2M * EZ-T8A 2M * Pre-wired (2 m) Emitter EZ-T6-A-L 2M Emitter EZ-T8-A-L 2M Through-beam Receiver EZ-T6-A-D 2M Receiver EZ-T8-A-D 2M (Emitter + Receiver) m * EZ-T66A EZ-T86A Standard M8 connector Emitter EZ-T66-A-L Emitter EZ-T86-A-L Receiver EZ-T66-A-D Receiver EZ-T86-A-D EZ-T62 2M * EZ-T82 2M Pre-wired (2 m) Emitter EZ-T62-L 2M Emitter EZ-T82-L 2M m Receiver EZ-T62-D 2M Receiver EZ-T82-D 2M EZ-T67 EZ-T87 Standard M8 connector Emitter EZ-T67-L Emitter EZ-T87-L Receiver EZ-T67-D Receiver EZ-T87-D Retro-reflective with Pre-wired (2 m) EZ-R6 2M * *5 EZ-R8 2M * *5 m *2 MSR function * Standard M8 connector ( mm) EZ-R66 EZ-R86 Diffuse-reflective Distance-settable Refer to EZ-LS. Slit-type Throughbeam Refer to EZ-G. Limited-reflective for transparent glasses Retro-reflective without MSR function for clear, plastic bottles Pre-wired (2 m) 5 to mm EZ-D6 2M * EZ-D8 2M * *5 Standard M8 connector (wide view) EZ-D66 EZ-D86 Pre-wired (2 m) EZ-D62 2M * *5 EZ-D82 2M * *5 Standard M8 connector m EZ-D67 EZ-D87 Pre-wired (2 m) 9± mm EZ-L6 2M * *5 EZ-L8 2M * *5 Standard M8 connector (narrow beam) EZ-L66 EZ-L86 Pre-wired (2 m) 2 to mm (BGS min setting) EZ-LS6 2M * EZ-LS8 2M * 2 to 2 mm (BGS max setting) Standard M8 Connector min. Incident threshold (FGS min setting) 2 min. Incident threshold (FGS max setting) EZ-LS66 EZ-LS86 Pre-wired (2 m) 2 to 2 mm (BGS min setting) EZ-LS6 2M EZ-LS8 2M *5 Standard M8 connector 2 to 8 mm (BGS max setting) EZ-LS68 EZ-LS88 axis EZ-G6 2M * *5 EZ-G8 2M * *5 Pre-wired (2 m) 2 axes EZ-G62 2M * EZ-G82 2M * 25 mm axis EZ-G6-MJ EZ-G8-MJ Pre-wired M8 connector 2 axes EZ-G62-MJ EZ-G82-MJ * Pre-wired (2 m) EZ-L6 2M EZ-L8 2M ±2 mm Standard M8 connector EZ-L68 EZ-J88 Pre-wired (2 m) *2 EZ-B6 2M EZ-B8 2M * Standard M8 connector 5 mm (8 mm) EZ-B66 EZ-B86 Pre-wired (2 m) *2 EZ-B62 2M * EZ-B82 2M * Standard M8 connector 2 m (5 mm) EZ-B67 EZ-B87 *. The Reflector is sold separately. Select the Reflector model most suited to the application. *2. The sensing distance specified is possible when the E9-RS is used. Values in parentheses indicate the minimum required distance between the Sensor and Reflector. *. Through-beam Sensors are normally sold in sets that include both the Emitter and Receiver. *. M2 Standard Pre-wired Connector Models are also availavble. When ordering, add "-MJ.M" to the end of the model number (e.g., EZ-T6-MJ.M). The cable is. m long. *5. M2 Pre-wired Smartclick Connector Models are also availavble. When ordering, add "-MTJ.M" to the end of the model number (e.g., EZ-T6-MTJ.M). The cable is. m long. Phone: 8.89.2 - Fax: 888.72.77 - Web: www.clrwtr.com - Email: info@clrwtr.com

EZ Oil-resistive Sensors [Refer to Dimensions on page.] Sensing method Appearance Connection method Sensing distance Through-beam (Emitter + Receiver) * Retro-reflective with MSR function * Diffuse-reflective *. The Reflector is sold separately. Select the Reflector model most suited to the application. *2. The sensing distance specified is possible when the E9-RS is used. Values in parentheses indicate the minimum required distance between the Sensor and Reflector. *. Through-beam Sensors are normally sold in sets that include both the Emitter and Receiver. *. M2 Standard Pre-wired Connector Models are also availavble. When ordering, add "-MJ.M" to the end of the model number (e.g., EZ-T6-MJ.M). The cable is. m long. Accessories (Order Separately) Pre-wired (2 m) Pre-wired M8 connector Red light Infrared light Model NPN output PNP output EZ-T6K 2M * EZ-T8K 2M * Emitter EZ-T6K-L 2M Emitter EZ-T8K-L 2M Receiver EZ-T6K-D 2M Receiver EZ-T8K-D 2M EZ-T6K-MJ.M EZ-T8K-MJ.M Emitter EZ-T6K-L-MJ 2M Emitter EZ-T8K-L-MJ 2M Receiver EZ-T6K-D-MJ 2M Receiver EZ-T8K-D-MJ 2M Pre-wired (2 m) *2 EZ-R6K 2M * EZ-R8K 2M Pre-wired M8 connector m (5 mm) EZ-R6K-MJ.M EZ-R8K-MJ.M Pre-wired (2 m) EZ-D6K 2M * EZ-D8K 2M Pre-wired M8 connector 5 to mm (wide view) EZ-D6K-MJ.M EZ-D8K-MJ.M Pre-wired (2 m) EZ-D62K 2M * EZ-D82K 2M Pre-wired M8 connector m EZ-D62K-MJ.M EZ-D82K-MJ.M Slit (A Slit is not provided with Through-beam Sensors) Order a Slit separately if required. [Refer to Dimensions on page 6.] Sensing distance Minimum detectable object Slit width Model Contents EZ-T@@ EZ-T@@A (Reference value).5-mm dia. 5 mm 5 mm.2-mm dia. E9-S65A -mm dia. 2 mm 5 mm.-mm dia. E9-S65B 2-mm dia. 8 mm 55 mm.7-mm dia. E9-S65C.5 mm m 7 mm.2-mm dia. E9-S65D mm 2.2 m.5 m.5-mm dia. E9-S65E 2 mm 5 m.5 m.8-mm dia. E9-S65F Mutual Interference Protection Filter A Filter is not provided with the Sensor (for the through-beam EZ-T@@A). Order a Filter separately if required. Sensing distance Appearance/Dimensions Model Quantity Remarks 5 m One set (contains Slits for both the Emitter and Receiver) Reflectors (Reflector required for Retroreflective Sensors) A Reflector is not provided with the Sensor. Be sure to order a Reflector separately. [Refer to Dimensions on E9-L/E9-S/E9-R] Sensing distance * EZ-R EZ-R@K EZ-B@/-B@6 EZ-B@2/-B@7 Name Rated value Reference value Model Quantity Remarks (sensing (sensing Rated value Rated value Rated value distance of 5 m) distance of m) m ( mm) --- 2 m ( mm) --- --- E9-R m ( mm) --- m (5 mm) 5 mm (8 mm) 2 m (5 mm) E9-RS Reflector --- 5 m ( mm) --- --- --- E9-R2 Retro-reflective --- 2.5 m ( mm) --- --- --- E9-R9 models are not ---.5 m( mm) --- --- --- E9-R provided with Fog Preventive --- m ( mm) --- 5 mm (8 mm) 2 m (5 mm) E9-RK Reflectors. Coating The MSR function Small Reflector ---.5 m (5 mm) --- --- --- E9-R is enabled. --- 7 mm (5 mm) --- --- --- E9-RS Tape Reflector ---. m (5 mm) --- --- --- E9-RS2 ---. m (5 mm) --- --- --- E9-RS Note:. If you use the Reflector at any distance other than the rated distance, make sure that the stability lights properly when you install the Sensor. 2. Refer to Reflectors on E9-L/E9-S/E9-R for details. * Values in parentheses indicates the minimum required distance between the Sensor and Reflector. m E9-E..2.8 7..9.2 Two sets each for the Emitter and Receiver (total of four pieces) Can be used with the EZ-T@@A Throughbeam models. The arrow indicates the direction of polarized light. Mutual interference can be prevented by altering the direction of polarized light from or to adjacent Emitters and Receivers. Note: The polarization directions of the Filters are offset by 9º to prevent interference. When you install the Emitter and Receiver, install them at the same angle to maintain this offset. Phone: 8.89.2 - Fax: 888.72.77 - Web: www.clrwtr.com - Email: info@clrwtr.com

EZ Mounting Brackets A Mounting Bracket is not enclosed with the Sensor. Order a Mounting Bracket separately if required. [Refer to Dimensions on E9-L/E9-S/E9-R] Appearance Model (material) Quantity Remarks Appearance Model (material) Quantity Remarks E9-L5 (SUS) * E9-L98 (SUS) *2 Metal Protective Cover Bracket Mounting Brackets E9-L (SUS) * E9-L5 (SUS) (Sensor adjuster) E9-L (SUS) *2 Horizontal Mounting Brackets Easily mounted to the aluminum frame rails of conveyors and easily adjusted. E9-L2 (SUS) *2 Horizontal Protective Cover Bracket E9-L5 (SUS) For left to right adjustment E9-L (SUS) Rear Mounting Bracket E9-L (SUS) *2 Compact Protective Cover Bracket (For EZ only) Note:. When using Through-beam models, order one bracket for the Receiver and one for the Emitter. 2. Refer to Mounting Brackets on E9-L/E9-S/E9-R for details. *. Cannot be used for Standard Connector models with mounting surface on the bottom. In that case, use Pre-wired Connector models. *2. Cannot be used for Standard Connector models. Sensor I/O Connectors (Sockets on One Cable End) (Models for Connectors and Pre-wired Connectors: A Connector is not provided with the Sensor. Be sure to order a Connector separately.) [Refer to Dimensions for S.] Size Cable Appearance Cable type Model 2 m SF-M2-2-A Straight * 5 m SF-M2-5-A M8 * Standard -wire 2 m SF-M22-2-A L-shaped * * 5 m SF-M22-5-A 2 m SF-M2-2-L Straight * PUR 5 m SF-M2-5-L M8 (Polyurethane) cable *2 2 m SF-M22-2-L -wire L-shaped * * 5 m SF-M22-5-L Note: When using Through-beam models, order one connector for the Receiver and one for the Emitter. *. Refer to Introduction to Sensor I/O Connectors/Sensor Controllers for details. *2. The Sensor can be used in low-temperature environments ( 25 C to C). Do not use the Sensor in locations that are subject to oil. *. The connector will not rotate after connecting. *. The cable is fixed at an angle of 8 from the sensor emitter/receiver surface. Phone: 8.89.2 - Fax: 888.72.77 - Web: www.clrwtr.com - Email: info@clrwtr.com

Ratings and Specifications EZ Sensing method Through-beam Retro-reflective with MSR function *. Values in parentheses indicate the minimum required distances between the Sensors and Reflectors. *2. Plastic bottles must pass with the minimum clearance of 5 mm. Diffuse-reflective (Narrowbeam Models) NPN Pre-wired EZ-T6 EZ-T62 EZ-T6A EZ-R6 EZ-D6 EZ-D62 EZ-L6 output Connector (M8) EZ-T66 EZ-T67 EZ-T66A EZ-R66 EZ-D66 EZ-D67 EZ-L66 Model PNP Pre-wired EZ-T8 EZ-T82 EZ-T8A EZ-R8 EZ-D8 EZ-D82 EZ-L8 Item output Connector (M8) EZ-T86 EZ-T87 EZ-T86A EZ-R86 EZ-D86 EZ-D87 EZ-L86 Sensing distance 5 m m m Spot diameter (reference value) --- m ( mm) * (when using E9-RS) m ( mm) * (when using E9-R) mm (white paper: mm) m (white paper: mm) Standard sensing object Opaque: 2-mm dia. min. Opaque: 75-mm dia. min. --- Minimum detectable object (reference value) --- Differential travel --- 2% max. of setting distance Directional angle Both emitter and receiver: to 5 2 to --- Red LED Light source (wavelength) Infrared LED (87 nm) Red LED (66 nm) Infrared LED (86 nm) (66 nm) 5 ma max. (Emitter: 5 ma max., Receiver: 2 ma Current consumption ma max. max.) Protection circuits Response time Reversed power supply polarity protection, Output short-circuit protection, and Reversed output polarity protection Operate or reset: ms max. IEC, IP67 Operate or reset: 2 ms max. 9 + mm (white paper, x mm) (2.5 dia. and sensing distance of 9 mm). mm (copper wire) Refer to Engineering data on page 8. Red LED (65 nm) Reversed power supply polarity protection, Output short-circuit protection, Mutual interference prevention, and Reversed output polarity protection Operate or reset: ms max. Degree of protection Connection method Pre-wired cable (standard length: 2 m and.5 m), Connector (M8) Weight Pre-wired cable (2 m) Approx. 2 g Approx. 65 g (packedstate) Connector Approx. g Approx. 2 g Material Case PBT (polybutylene terephthalate) Lens Modified polyarylate Methacrylic resin Modified polyarylate Sensing method Retro-reflective for clear, plastic bottles (without MSR function) NPN output EZ-B6 EZ-B66 EZ-B62 EZ-B67 Model Item PNP output EZ-B8 EZ-B86 EZ-B82 EZ-B87 Sensing distance 5 mm (8 mm) * (using E9-RS) 2 m (5 mm) * *2 (using E9-RS) Opaque materials, 75mm dia. min. Standard sensing object (Standard detectable object :glass Cylinder 5mm dia. thickness.mm length 5mm, and the transmission factor 92% or less in wave length 66nm) Light source (wavelength) Red LED (66 nm) Current consumption ma max. Protection circuits Reversed power supply polarity protection, Output short-circuit protection, Mutual interference prevention, and Reversed output polarity protection Response time Operate or reset: ms max. Degree of protection IEC, IP67 Connection method Weight (packed state) Material Pre-wired cable (2 m) Standard Connector Case Lens Pre-wired cable (standard length: 2 m and.5 m) Approx. 65 g Approx. 2 g PBT (polybutylene terephthalate) Modified polyarylate Connector (M8, pins) Pre-wired cable (standard length: 2 m and.5 m) Connector (M8, pins) Phone: 8.89.2 - Fax: 888.72.77 - Web: www.clrwtr.com - Email: info@clrwtr.com

EZ Sensing method Transparent glass Limited-reflective (for transparent object detection ) Model NPN output EZ-L6 EZ-L68 Item PNP output EZ-L8 EZ-L88 Sensing distance Spot diameter (reference value) Minimum detectable object (reference value) Light source (wavelength) Current consumption Protection circuits ±2 mm (transparent glasses mm) 2-mm dia. min. (at sensing distance of mm). mm dia. (copper wire) Red LED (66 nm) ma max. Power supply reverse polarity protection, Output short-circuit protection, Mutual interference prevention, Reverse output polarity protection Response time Operate or reset: ms max. Degree of protection IEC, IP67 Connection method Pre-wired (standard length: 2 m) M8 connector Weight (packed state) Material Pre-wired cable (2 m) Standard Connector Case Lens Approx. 65 g Approx. 2 g PBT (polybutylene terephthalate) Modified polyarylate Phone: 8.89.2 - Fax: 888.72.77 - Web: www.clrwtr.com - Email: info@clrwtr.com

EZ Oil-resistant * Values in parentheses indicate the minimum required distance between the Sensor and Reflector. Common Sensing method Through-beam Retro-reflective Diffuse-reflective Pre-wired Models EZ-T6K EZ-R6K EZ-D6K EZ-D62K NPN output M8 Pre-wired connector EZ-T6K-MJ EZ-R6K-MJ EZ-D6K-MJ EZ-D62K-MJ Model PNP Pre-wired Models EZ-T8K EZ-R8K EZ-D8K EZ-D82K output Item M8 Pre-wired connector EZ-T8K-MJ EZ-R8K-MJ EZ-D8K-MJ EZ-D82K-MJ Sensing distance 5 m m (5 mm) * (when using E9-RS) 2 m ( mm) * (when using E9-R) mm (white paper: mm) Standard sensing object Opaque: 2-mm dia. min. Opaque: 75-mm dia. min. --- Differential travel --- 2% max. of setting distance Directional angle Both emitter and receiver: to 5 2 to --- Light source (wavelength) Infrared LED (87 nm) Red LED (66 nm) Infrared LED (86 nm) Current consumption 5 ma max. (Emitter: 5 ma max., Receiver: 2 ma max.) ma max. Protection circuits Response time Reversed power supply polarity protection, Output short-circuit protection, and Reversed output polarity protection Operate or reset: ms max. m (white paper: mm) Reversed power supply polarity protection, Output short-circuit protection, Mutual interference prevention, and Reversed output polarity protection Degree of protection IP67 (IEC), Oil resistant models: IP67 (IEC) (in-house standards: oilproof), excluding cables and connectors Connection method Pre-wired cable (standard length: 2 m), M8 Pre-wired Connector Weight Pre-wired cable (2 m) Approx. 2 g Approx. 65 g (packed state) Connector (M8, pins) Approx. 5 g Approx. g Material Case PBT (polybutylene terephthalate) Lens Modified polyarylate Methacrylic resin Modified polyarylate Power supply voltage Control output Sensitivity adjustment Ambient illumination (Receiver side) Ambient temperature range Ambient humidity range Insulation resistance Dielectric strength Vibration resistance Shock resistance Indicator Accessories 2 to 2 VDC±%, ripple (p-p): % max. Load power supply voltage: 26. VDC max., Load current: ma max. Residual voltage: Load current of less than ma: V max. Load current of to ma: 2 V max. Open collector output (NPN/PNP depending on model) Light-ON/Dark-ON selectable One-turn adjuster Incandescent lamp:, lx max. Sunlight:, lx max. Operating: 25 to 55 C, Some connector models: C to 55 C * (with no icing or condensation) Storage: to 7 C (with no icing or condensation) Operating: 5% to 85%, Storage: 5% to 95% (with no condensation) 2 MΩ min. at 5 VDC, VAC, 5/6 Hz for min Destruction: to 55 Hz,.5 mm double amplitude for 2 hours each in,, and Z directions Destruction: 5 m/s 2 times each in,, and Z directions Operation Stability (green) Through-beam Emitter has power only. Instruction manual (Neither Reflectors nor Mounting Brackets are provided with any of the above models.) * The ambient temperature range during operation for connector models depends on the model. For the EZ-T66/T86/R66/R86, the range is C to 55 C. For the EZ-D66/D86/D67/D87, the range is C to 55 C. For other connector models, the range is 25 C to 55 C. The sensing distance for Retro-reflective Models (EZ-R66/R86) between C to 25 C, however, will be as follows (not the values in the table): With E9-RS: m ( mm), With E9-R: 2 m ( mm). Also, use the SF-M2@-@@-L Sensor I/O Connector (PUR cable) for applications between 25 C to C. (Refer to page.) Phone: 8.89.2 - Fax: 888.72.77 - Web: www.clrwtr.com - Email: info@clrwtr.com

Engineering Data (Reference Value) EZ Parallel Operating Range Through-beam Models Through-beam Models Through-beam Models EZ-T@(T@6) EZ-T@A EZ-T@2(T@7) 8 6 2 8 6 2 2..5..5 2 6 8 2 Distance (m) 2 6 8 Distance (m) Through-beam Models Through-beam Models Retro-reflective Models EZ-T@(T@6) and Slit (A Slit is mounted to the Emitter and Receiver.) EZ-T@A and Slit (A Slit is mounted to the Emitter and Receiver.) EZ-R@(R@6) and Reflector 2.5..5 2. 2 Distance (m) 25 2 5 5 5 5 2 25 E9-S65B E9-S65C E9-S65D E9-S65E 2 E9-S65F 5 Distance (m) 2 5 5 5 5 2 E9-S65B E9-S65C 2 E9-S65D E9-S65E 5 Distance (m) E9-S65F 2 5 5 5 5 2 E9-RK E9-R 2 E9-R9 E9-R Distance (m) 6 8 E9-R E9-RS E9-R2 EZ-B@/B@6 + E9-RS Reflector (Order Separately) EZ-B@2/B@7 + E9-RS Reflector (Order Separately) 5 2 Reflector: E9-RS 8 6 Reflector: E9-RS 2.5.5 2 2.5 Distance (m) 2.5.5 2 2.5.5 Distance (m).5 2 6 5 5-mm type 8 2-m type Phone: 8.89.2 - Fax: 888.72.77 - Web: www.clrwtr.com - Email: info@clrwtr.com

EZ Operating Range Diffuse-reflective Models Diffuse-reflective Models Narrow-beam Reflective Models EZ-D@(D@6) EZ-D@2(D@7) EZ-L@(L@6) 2 2 Sensing object: mm white paper 5 5 2 25 Distance (m) 8 6 2 2 6 8 Sensing object: mm white paper.2..6.8..2..6 Distance (m) Excess Gain vs. Set Distance Through-beam Models Retro-reflective Models Diffuse-reflective Models EZ-T@(T@6)/-T@A/-T@2(T@7) EZ-R@(R@6) and Reflector EZ-D@(D@6) Sensing object: mm white paper 8 6 2 2 6 8 5 5 2 25 Distance (m) Excess gain ratio EZ-T@2 (T@7) EZ-T@A Excess gain ratio E9-R9 E9-RK E9-R E9-RS E9-R2 Excess gain ratio 7 5 7 5 Sensing object: mm white paper EZ-T@ (T@6) E9-R Operating level.7.5 E9-R.. 2 5 6 7 8. 2 6 8. 5 5 2 25 5 Diffuse-reflective Models Narrow-beam Reflective Models Limited reflective Models EZ-D@2(D@7) EZ-L@(L@6) EZ-L@(L@8) Excess gain ratio 7 5 7 5 Sensing object: mm white paper Excess gain ratio 7 5 7 5 Excess gain ratio 7 5 7 5 SUS Operating level.7.5. Operating level.7.5. Operating level.7.5. White paper Glass..5.5 2 2.5. 5 5 2 25 5. 2 6 8 2 Phone: 8.89.2 - Fax: 888.72.77 - Web: www.clrwtr.com - Email: info@clrwtr.com

Excess gain ratio Excess gain ratio EZ Excess Gain vs. Set Distance EZ-B@/B@6 + E9-RS Reflector (Order Separately) EZ-B@2/B@7 + E9-RS Reflector (Order Separately) 5-mm type 2-m type..5.5 2 2.5..5.5 2 2.5.5.5 5 Sensing Object Size vs. Sensing Distance Diffuse-reflective Models Diffuse-reflective Models Narrow-beam Reflective Models EZ-D@(D@6) EZ-D@2(D@7) EZ-L@(L@6) Distance (mm) 5 25 d d White paper SUS (glossy surface).5.5 d d SUS (glossy surface) 25 2 d d White paper 2 2.5 5 5 2 5 Black paper.5.5 White paper Black paper 5 5 5 2 25 5 Side length (one side) of sensing object: d (mm) 5 5 2 25 5 Side length (one side) of sensing object: d (mm) 2 5 7.5 2 Side length (one side) of sensing object: d (mm) Spot Diameter vs. Sensing Distance Narrow-beam Reflective Models EZ-L@(L@6) Differential Travel vs. Sensing Distance Narrow-beam Reflective Models EZ-L@(L@6) Spot diameter (mm)..5. 2.5 2. Differential travel (mm) 25 2 5.5..5 5 2 6 8 2 6 5 75 25 5 Distance (mm) Distance (mm) Phone: 8.89.2 - Fax: 888.72.77 - Web: www.clrwtr.com - Email: info@clrwtr.com

I/O Circuit Diagrams EZ NPN Output Model* EZ-T6(K) EZ-T66 EZ-T62 EZ-T67 EZ-T6A EZ-T66A EZ-R6(K) EZ-R66 EZ-D6(K) EZ-D66 EZ-D62(K) EZ-D67 EZ-L6 EZ-L66 EZ-B6 EZ-B66 EZ-B62 EZ-B67 EZ-L6 EZ-L68 PNP Output Model* EZ-T8(K) EZ-T86 EZ-T82 EZ-T87 EZ-T8A EZ-T86A EZ-R8(K) EZ-R86 EZ-D8(K) EZ-D86 EZ-D82(K) EZ-D87 EZ-L8 EZ-L86 EZ-B8 EZ-B86 EZ-B82 EZ-B87 EZ-L8 EZ-L88 Operation mode Light-ON Dark-ON Through-beam Emitter Operation mode Light-ON Dark-ON Through-beam Emitter Timing charts Incident light No incident light Operation ON OFF Output ON transistor OFF Load Operate (e.g., relay) Reset (Between brown () and black () leads) Incident light No incident light Operation ON OFF Output ON transistor OFF Load Operate (e.g., relay) Reset (Between brown () and black () leads) Power Timing charts Photoelectric Sensor main circuit Incident light No incident light Operation ON OFF Output ON transistor OFF Load Operate (e.g., relay) Reset (Between blue () and black () leads) Incident light No incident light Operation ON OFF Output ON transistor OFF Load Operate (e.g., relay) Reset (Between blue () and black () leads) Power Photoelectric Sensor Main Circuit Operation selector L side (LIGHT ON) D side (DARK ON) Operation selector L side (LIGHT ON) D side (DARK ON) Brown Blue Brown Blue Ope r ation (O r ange ) Stability (Green) Photo - elect r ic Sensor main circuit Output circuit Through-beam Receivers, Retro-reflective Models, Diffuse-reflective Models, Limited reflective Models. Operation (Orange) Connector Pin Arrangement 2 to 2 VDC 2 (Control output) Pin 2 is not used. 2 Br o w n Output circuit ma max. Bla c k Z D Blue Connector Pin Arrangement Pins 2 and are not used. Through-beam Receivers, Retro-reflective Models, Diffuse-reflective Models, Limited reflective Models. Stability (Green) Photoelectric Sensor main circuit Connector Pin Arrangement 2 Pin 2 is not used. 2 Brown ZD Black (Control ma output) Blue max. Connector Pin Arrangement 2 to 2 VDC Pins 2 and are not used. 2 to 2 VDC Load (Rel a y ) V 2 to 2 VDC Load (Relay) V * Models numbers for Through-beam Sensors (EZ-T@@) are for sets that include both the Emitter and Receiver. The model number of the Emitter is expressed by adding "-L" to the set model number (example: EZ-T6-L 2M), the model number of the Receiver, by adding "-D" (example: EZ-T6-D 2M.) Refer to Ordering Information to confirm model numbers for Emitter and Receivers. Phone: 8.89.2 - Fax: 888.72.77 - Web: www.clrwtr.com - Email: info@clrwtr.com

EZ Plugs (Sensor I/O Connectors) M8 connector Pin arrangement 2 2 SF-M2-2-A SF-M2-5-A SF-M22-2-A SF-M22-5-A Wire color Brown White Blue Black Classification DC Wire color Note: Pin 2 is not used. Connector pin No. Application Brown Power supply (+V) White 2 Blue Power supply ( V) Black Output Nomenclature Through-beam Models EZ-T@@ (Receiver) EZ-T@@A (Receiver) Retro-reflective Models EZ-R@@ EZ-B@@ Diffuse-reflective Models EZ-D@@ Narrow-beam Reflective Models EZ-L@@ Limited reflective Models EZ-L@@ Stability (green) Operation selector Operation Sensitivity adjuster Phone: 8.89.2 - Fax: 888.72.77 - Web: www.clrwtr.com - Email: info@clrwtr.com

EZ Safety Precautions Refer to Warranty and Limitations of Liability. WARNING This product is not designed or rated for ensuring safety of persons either directly or indirectly. Do not use it for such purposes. Precautions for Correct Use Do not use the product in atmospheres or environments that exceed product ratings. Wiring M8 Metal Connector Be sure to connect or disconnect the metal connector after turning OFF the Sensor. Hold the connector cover to connect or disconnect the metal connector. Secure the connector cover by hand. Do not use any pliers, otherwise the connector may be damaged. The proper tightening torque range is between. and. N m. Be sure to tighten the connector securely, otherwise the specified degree of protection may not be maintained or the connector may be disconnected due to vibration. Mounting Sensor Mounting Use M screws to mount the sensor and tighten each screw to a maximum torque of.5 N m. EZ-@@@ E9-L Mounting Bracket (sold separately) Oil-resistant Models Oil Resistance Although the EZ-@@@K Sensors have oil-resistant specifications, performance may be affected by certain types of oil. Refer to the following table. EZ-@@@K Sensors are tested for resistance to the oils given in the following table. Refer to the information in the table when deciding which type of oil to use. Test oil classification Lubricant Water insoluble machining oil Water soluble machining oil Product name Velocity No. (manufactured by Exxon Mobil) ushiron Oil No.2 ac (manufactured by ushiro Chemical Industry Co., Ltd.) ushiroken EC5T- (manufactured by ushiro Chemical Industry Co., Ltd.) ushiron Lubic HWC68 (manufactured by ushiro Chemical Industry Co., Ltd.) Gryton 7D (manufactured by Toho Chemical Industry Co., Ltd.) Kinematic viscosity (mm 2 /s) at C 2.2 Less than ushironken S5N (manufactured by 7 to 9.8 ushiro Chemical Industry Co., Ltd.) Note:. The EZ maintained a minimum insulation resistance of MΩ after it was dipped in all the above oils for 2 hours. 2. When using the Sensors in environments subject to oils other than those listed above, use the figures for kinematic viscosity and ph from the table as general guidelines. Additives and other substances contained in oils may affect the EZ. Be sure to consider this before use. --- ph --- 7 to 9.5 7 to 9.9 7 to 9.2 Phone: 8.89.2 - Fax: 888.72.77 - Web: www.clrwtr.com - Email: info@clrwtr.com

Dimensions Sensors Through-beam* Pre-wired Models EZ-T6(K) EZ-T8(K) EZ-T6A EZ-T8A EZ-T62 EZ-T82 2. 2. Emitter.8 7.2 Lens Power 2.8 25. Two, M 2 2 dia. vinyl-insulated round cable with 2 conductors (Conductor cross section:.2 mm 2 (AWG2), Insulator diameter:. mm), Standard length: 2 m.2 Operation Indicator 7.5 Receiver.8 7.2 Stability (green) Lens 2.8 2 EZ (Unit: mm) Tolerance class IT6 applies to dimensions in this data sheet unless otherwise specified..5 2.7 Operation selector Sensitivity adjuster Terminal Specifications No. +V 2 --- V --- Pins 2 and are not used. M8 Pre-wired Connector (EZ-T@@K-MJ) dia. vinyl-insulated round cable with 2 or conductors, Standard length:. m 2 M8 * The Emitter cable has two conductors and the Receiver cable has three conductors. 25. Two, M dia. vinyl-insulated round cable with conductors (Conductor cross section:.2 mm 2 (AWG2), Insulator diameter:. mm), Standard length: 2 m 2.7 Terminal No. +V 2 --- V Output Pin 2 is not used. Through-beam* Connector Models EZ-T66 EZ-T86 EZ-T66A EZ-T86A EZ-T67 EZ-T87 2. Emitter.8 7.2 Lens Power 2.8 25.. Two, M M8 connector Operation Indicator 2 2 9.75.2 7.5 2.7.5 Operation selector Terminal No. +V 2 --- V --- Pins 2 and are not used. Receiver.8 Stability (green) Sensitivity adjuster 2. 7.2 Lens 2.8 2. 25. Two, M M8 connector 9.75 2.7 Terminal No. Specifications Specifications Specifications +V 2 --- V Output Pin 2 is not used. * Models numbers for Through-beam Sensors (EZ-T@@) are for sets that include both the Emitter and Receiver. The model number of the Emitter is expressed by adding "-L" to the set model number (example: EZ-T6-L 2M), the model number of the Receiver, by adding "-D" (example: EZ-T6-D 2M.) Refer to Ordering Information to confirm model numbers for Emitter and Receivers. Phone: 8.89.2 - Fax: 888.72.77 - Web: www.clrwtr.com - Email: info@clrwtr.com

EZ Retro-reflective Models Pre-wired Models EZ-R6(K) EZ-B6 EZ-R8(K) EZ-B8 EZ-D6(K) EZ-B62 EZ-D8(K) EZ-B82 EZ-D62(K) EZ-L6 EZ-D82(K) EZ-L8 EZ-L6 EZ-L8 2..8 2.8 Operation Indicator Stability (green) Receiver Lens 7 dia..2 7.5 2.5 Operation selector Sensitivity adjuster M8 Pre-wired Connector (EZ-T@@K-MJ) 8 25. 6.7 dia. vinyl-insulated round cable with conductors, Standard length:. m 2 Emitter Lens 7 dia. Two, M dia. vinyl-insulated round cable with conductors (Conductor cross section:.2 mm 2 (AWG2), Insulator diameter:. mm), Standard length: 2 m M8 Terminal No. +V 2 --- V Output Retro-reflective Models Connector Models EZ-R66 EZ-B66 EZ-R86 EZ-B86 EZ-D66 EZ-B67 EZ-D86 EZ-B87 EZ-D67 EZ-L68 EZ-D87 EZ-L88 EZ-L66 EZ-L86 2. Operation Indicator.8 Stability (green) Receiver Lens 7 dia. 2.8.2 7.5 2.5 Operation selector Sensitivity adjuster 8 25. 6.7 Emitter Lens 7 dia.. Two, M M8 connector 9.75 Terminal No. Specifications Specifications +V 2 --- V Output Note: The lens for the EZ-D@/D@6/L@@/B@@ is red. The lens for the EZ-D@2/D@7 is black. Phone: 8.89.2 - Fax: 888.72.77 - Web: www.clrwtr.com - Email: info@clrwtr.com

EZ Accessories (Order Separately) Slits E9-S65A E9-S65B E9-S65C. A 2.2 Slits E9-S65D E9-S65E E9-S65F. A 2.2 2.2 2.7 2.2 2.7.2-mm-thick Model Size A Material E9-S65A.5 dia. SUS E9-S65B. dia. stainless E9-S65C 2. dia. steel.2-mm-thick Model Size A Material E9-S65D.5 SUS E9-S65E. stainless E9-S65F 2. steel Slits E9-L (Mounting dimensions) Slits E9-L (Mounting dimensions) 9.5. 8.7 26.2 2.2 7.8 2. R2 29 6 7. 6.7.5 8 6.8 2 8.8 9 2.5 27 6.2.2 26.6 Mounting Brackets Refer to E9-R for details. Sensor I/O Connectors Refer to S@ for details. Phone: 8.89.2 - Fax: 888.72.77 - Web: www.clrwtr.com - Email: info@clrwtr.com

Terms and Conditions Agreement Read and understand this catalog. Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Warranties. (a) Exclusive Warranty. Omron s exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron disclaims all other warranties, express or implied. (b) Limitations. OMRON MAKES NO WARRANT OR REPRESENTATION, EPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABILIT OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. BUER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABL MEET THE REQUIREMENTS OF THEIR INTENDED USE. Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Products or otherwise of any intellectual property right. (c) Buyer Remedy. Omron s sole obligation hereunder shall be, at Omron s election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount equal to the purchase price of the non-complying Product; provided that in no event shall Omron be responsible for warranty, repair, indemnity or any other claims or expenses regarding the Products unless Omron s analysis confirms that the Products were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by Buyer must be approved in writing by Omron before shipment. Omron Companies shall not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice, recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above warranty. See OMRON website or contact your Omron representative for published information. Limitation on Liability; Etc. OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN AN WA CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANT, NEGLIGENCE OR STRICT LIABILIT. Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted. Suitability of Use. Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in the Buyer s application or use of the Product. At Buyer s request, Omron will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer s application, product or system. Buyer shall take application responsibility in all cases. NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERT OR IN LARGE QUANTITIES WITHOUT ENSURING THAT THE SSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT(S) IS PROPERL RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SSTEM. Programmable Products. Omron Companies shall not be responsible for the user s programming of a programmable Product, or any consequence thereof. Performance Data. Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Omron s test conditions, and the user must correlate it to actual application requirements. Actual performance is subject to the Omron s Warranty and Limitations of Liability. Change in Specifications. Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for your application. Please consult with your Omron s representative at any time to confirm actual specifications of purchased Product. Errors and Omissions. Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors or omissions. 25. In the interest of product improvement, specifications are subject to change without notice. (c)copyright OMRON Corporation 25 All Right Reserved. Phone: 8.89.2 - Fax: 888.72.77 - Web: www.clrwtr.com - Email: info@clrwtr.com