Cloth Sheets Engineered for maximum flexing and fast cutting, cloth sheets have a longer life than paper sheets. They tear cleanly and straight without shedding and are packed in a protective dispenser to eliminate waste and damage. Typical Applications Scouring and light deburring Scale and rust removal Blending machine tool marks Fine sanding and polishing Metalite K225 Sheets General purpose metalworking applications Premium P-graded aluminum oxide Greater cut rate than competitive products abrasive Advanced full resin bond system Exceptional grain adhesion for longer life Flexible J-wt backing Superior conformability to complex surfaces and better finishes Lightning Metalite K227 Sheets For quality finishing and polishing P-graded aluminum oxide abrasive Fast cut rate and consistent finish Resin bond system Long life J-wt backing with increased Superior conformability to complex surfaces and better finishes flexibility Emery K622 Sheets Ideal for extra fine finishes K622 Highest quality, natural Produces extra fine finishes, ideal for lapping emery abrasive 89 Screen-Bak Durite Q421 Sheets For wet or dry applications P-graded silicon carbide Extreme resistance to loading, long life abrasive (220 and coarser) on an Waterproof open mesh backing www.nortonabrasives.com
9 x 11 Cloth Sheets METALITE K225 METALITE K227 EMERY K622 MIN./ SIZE GRIT STD. PKG. UPC NO. UPC NO. UPC NO. UPC NO. ** SCREEN-BAK Q421 9 x 11 50 25/125 66261101862* 60 25/125 66261101861* 80 25/125 66261126340 66261101750 66261100960** 100 50/250 66261126339 66261101745 66261100955 ** 120 50/250 66261126338 66261101740 66261100950 ** 150 50/250 66261126337 66261101735 66261100945 ** 180 50/250 66261126336 66261101730 66261100940 ** 220 50/250 66261126335 66261100935 ** 240 50/250 66261126334 280 50/250 66261126333 66261101720 320 50/250 66261126332 66261101710 66261100920 400 50/250 66261126331 66261101705 66261100915 500 50/250 66261101700 600 50/250 66261126330 Extra Coarse 25/125 66261101255 Coarse 25/125 66261101250 Medium 50/250 66261101245 Fine 50/250 66261101240 Finer than 500 50/250 *SUPPLIED IN E-Z FLEX METALITE K224 ** Q421 IS P-GRADED </=220 GRIT WATERPROOF PACKAGING STANDARDS: MIN./STD. PKG. Q421 = 25/125 SPEC check Cloth Sheet Starting Recommendations WATERPROOF FAST CUT SLOW CUT LOAD RESISTANT GENERAL FINISH FINE FINISH Screen-Bak Durite Q421 Metalite K225 Emery K622 90 Cloth Sheet Competitive Cross Reference NORTON 3M HERMES KLINGSPOR SIA VSM K224 311T Three-M-Ite BG RB317LX CS310X KK504X 211K Electrocut K225/K227 211K Three-M-Ite RB232J KL361 2947J KK504J 311K Three-M-Ite KK504X K622 011K Crystal Bay KL371 C680J Q421 481W TECHtips Use light machine oil with cloth sheets as a lubricant for finer finishes and quicker cut. It is the user s responsibility to refer to and comply with ANSI B7.7 www.nortonabrasives.com
Paper Sheets Full size (9" x 11") and cut sheets are used for both metalworking and woodworking applications. Packed in protective dispensers and/or convenient job packs to eliminate waste and permit easy, neat storage. Typical Applications Light duty, metal sanding Primer sanding, defect removal from painted surfaces Filler sanding Sanding and finishing of composites and fiberglass Bare wood sanding Sanding between sealer coats No-Fil Adalox A275 Sheets The performance leader for dry finishing Premium P-graded, heat-treated Superior life, fast cut rate, consistent finish aluminum oxide abrasive Unique fiber-reinforced, B-wt 50-60% improvement in tear strength latex-saturated backing Flexible; can be used wet Water-based stearate, non- Provides maximum load resistance and extended life; pigmented, No-Fil coating no color transfer to work Improved - Ultra fine grit (P1000, Better cut rate and total cut, while minimizing loading P1200, P1500) upgrade = maximum life NEW File sheets Used on manual or air file boards; ideal for sanding, shaping or finishing plastic filler, gel coat, composities, paint, and primer expanded offering! the Finest Sandpaper just got FINER! Black Ice T402 Waterproof Sheets Ultimate surface finishes wet Premium, ultra fine (1000 2500 Ultimate finish in wet applications grits) silicon carbide abrasive Strong resin bond system Long life in wet applications A-wt waterproof paper backing Ultimate flexibility design Wet-curl resistance Environmentally stable; resists humidity-caused curling BETTER NorZon Plus H875 Sheets Excellent for soft material applications Patented NorZon Plus zirconia Extended life over original NorZon products abrasive Strong E-wt paper, latex Increased durability and chip resistance, flexible impregnated Open coat design Reduced loading; ideal for body filler, fiberglass and composite sanding 91 BETTER Blue-Bak T414 Waterproof Sheets Exceptional finishing in wet applications Sharp silicon carbide abrasive (220-600 grit range) Strong resin bond A-wt waterproof paper backing Exceptional finishes in wet applications Longer life in wet applications Extremely flexible Improved wet-curl resistance Environmentally stable; resists humidity-caused curling
Paper Sheets (CONTINUED) Tufbak Waterproof T247 Sheets For long life wet Premium P-graded aluminum Extended life oxide grain P2000 grain For the ultra fine finish B-wt waterproof paper Excellent flexibility and tear-resistance Tufbak Waterproof T461 Sheets For more aggressive applications Silicon carbide abrasive Fast cutting with excellent finish in wet applications Strong, waterproof C-wt Ideal for more aggressive applications backing design Environmentally stable, resists product curl in humidity Resists chipping and cracking Advanced resin bond system Excellent flexibility and abrasive adhesion No-Fil Adalox A251 Sheets Unrivaled flexibility and finish dry P-grade aluminum oxide abrasive Increased life, consistent finish A-wt paper backing Increased flexibility for hand sanding applications Stearated (No-Fil), open coat Reduced loading No-Fil Adalox A290 Sheets Unrivaled durability and value for dry finishing P-graded aluminum oxide abrasive Increased life, fast cut rate, consistent finish Heavy-duty, C-wt backing Edge-tear resistance, durable for cut sheet machine sanding applications Stearated (No-Fil), open coat Reduced loading No-Fil Durite A413/A414 Sheets Good general purpose choice Sharp silicon carbide abrasive Excellent for finishing Penetrates dense, hard materials (glass, ceramics, etc.) A413 B-wt paper backing Flexible, yet durable A414 A-wt paper backing Very flexible and conformable Stearated (No-Fil), open coat Reduced loading 92 Adalox A212, A213, A211 Sheets For dry, general purpose sanding Aluminum oxide grain, open-coat Aggressive cutting action for all dry sanding applications Available in three backing weights: A212 A-wt, A213 C-wt, A211 D-wt Extensive, P-graded grit range Designed for heavy-duty to light-duty hand and machine sanding, (P36 P220 grit) coarse to fine Garnet A511, A513, A514 Sheets Ideal on soft woods Natural garnet grain Excellent for soft woods, consistent finishes Available in three backing weights: Designed for heavy-duty to light-duty hand and machine sanding, A511 A-wt, A513 C-wt, A514 D-wt coarse to fine www.nortonabrasives.com
Paper Sheets (CONTINUED) SPEC check Paper Sheet Starting Recommendations GENERAL MATERIAL PERFORMANCE DUTY Unfinished Metal A275 A251 Primed/Painted Surfaces A275 A251 Fiberglass/Composites A275, H875 A251, H290 Bare Wood A275 A511, A513, A514 Clear Coat Sanding T402 Sealer Sanding A275, A251 A413, A414 Lacquer Sanding T402, T414 Wet Sanding T402, T414 T247, T461 Paint Stripping A275, H875 A290, H290 Drywall Sanding Q421 A412 All Purpose Dry Sanding A212, A213, A211 Recommended Grit Selection ROUGHING TO INTERMEDIATE TO FINE ULTRA FINE INTERMEDIATE FINISHING FINISHING FINISHING 36 80 80 240 240 400 400 2500 Paper Sheet Competitive Cross Reference NORTON 3M HERMES KLINGSPOR MIRKA VSM A211 230U, 240N, 346U KP31C A212 210N HFB PL31 A213 230N HFB PL31 KP31B A251 316U PL36 GoldFlex A275 214U, 216U, 334U HC133, HCAB PS33 Q-Silver, Royal A290 236U, 316U HCAB PS33, PL36 Bulldog Gold KP911 A413 414N, 415N PSF-LL, SA167 PL35 Carat(B) CP131A A414 404N, 405N, 414N PSF-LL, SA167 FineFlex CP131A A511 110N A513 130N GCAB A514 140N GCAB A621 H875 750U, 751U, 740I, 745I Royal Coarse Cut KP510E, KP709 T402 401Q WSFlex18B PS11 Waterproof (A) CP918A T414 413Q WSFlex18B PS11 Waterproof (A) CP918A T247 213Q PS12 T461 438Q, 431Q WSFlex18C PS11 CP918C Paper Sheet Recommended Backing Weight A-WT B-WT C-WT D-WT E-WT 93 Most Flexible/ Lightest Applications Stiffest/Strongest Most Aggressive Applications
9 x 11 Paper Sheets A275 T402 BETTER T414 A211 A213 A212 A514 MIN./ STD. SIZE GRIT PKG. 9 x 11 36 25/125 66261100335 40 66261100330 66261101570 50 50/250 66261100325 66261101565 60 66261100320 80 66261131634 66261100315 100 100/500 66261131633 66261100295 120 66261131632 66261100290 150 66261131631 66261100285 180 66261131630 66261100245 220 66261131629 66261139367* 66261100240 240 66261131628 66261139366* 280 66261131627 66261139365* 320 66261131626 66261139364* 360 66261139363* 400 66261131624 66261139362* 500 66261131623 66261139361* 600 66261131622 66261139360* 800 66261131621 1000 100/500 66261131620 66261139381* 1200 66261131619 66261139380* 1500 66261131618 66261139379* 2000 66261139378* 2500 66261139377* WATERPROOF * PACKAGING STANDARDS: T247, T402, T414, T461 = 50/250 Emery Sheets On durable C-wt. paper for fine metal polishing and metallurgical sample preparation. A621 EMERY CAMI MIN./ 9 X 11 9 X 13-3/4 GRIT GRIT STD. PKG. UPC NO. UPC NO. 3 180 100/500 66261101315* 2 220 66261101310* 1 280 66261101263 66261101300* 0 500 66261101261 66261101290* 2/0 600 66261101260 66261101285* 3/0 1000 66261101259 66261101280* 4/0 1200 66261101258 66261101275* *PACKAGING STANDARDS: MIN. PKG./STD. PKG. = 100/1000 Rubber Hand Sanding Block A resilient rubber block that conforms well to mild contours and flat surfaces. 3-2/3" x 9" sheets are securely held by slotted jaws at each end of the block to permit quick, easy sheet changes. SIZE STD. PKG. UPC. NO. 3-2/3 x 9 14 07660743140 94 Paper Cut Sheets BETTER T414 A211 A213 A290 SIZE GRIT MIN/STD. PKG. UPC NO. UPC NO. UPC NO. UPC NO. 3-2/3 x 9 60 100/1000 66261102925 80 66261102920 66261101119 100 66261102900 120 66261102895 150 66261101125 180 66261101124 220 66261139359 66261101123 280 66261139357 320 66261139356 400 66261139354 500 66261139353 600 66261139352 WATERPROOF www.nortonabrasives.com
A513 A511 A251 A413 A414 T247 T461 MIN./ STD. SIZE GRIT PKG. 9 x 11 36 40 50 50/250 60 66261101560 66261101175 80 66261101555 66261101505 66261184107 66261100801 66261101170 100 100/500 66261101535 66261101500 66261184106 66261100800 66261101165* 120 66261101530 66261101495 66261184105 66261100799 66261101160* 150 66261101525 66261101490 66261184108 66261100802 66261101155* 180 66261101489 66261184104 66261100803 66261134608 66261101150* 220 66261101488 66261184103 66261100804 66261134606 66261126063* 240 66261101487 66261184102 66261100805 66261134604 66261126062* 66261130331* 280 66261101486 66261184101 66261134602 320 66261184100 66261100807 66261134600 66261126060* 66261130332* 360 400 66261184098 66261126059* 66261130333* 500 50/250 66261126058 600 66261126057 66261130334 800 66261139347 1000 50/250 66261126056 1200 66261126055 1500 66261126054 2000 66261126053 2500 WATERPROOF * PACKAGING STANDARDS: T247, T402, T414, T461 = 50/250 File Sheets Used on manual or air file boards for sanding, shaping, and finishing. A275 H290 BETTER H875 BETTER H875 MIN/ MIN/ MIN/ STD. SPEED-GRIP STD. STD. SIZE GRIT PKG. PSA SPEED-GRIP VACUUM PSA PKG. PSA PKG. SPEED-GRIP 2-3/4 100 50/500 66261131657 x 16 120 66261131656 180 66261131654 2-3/4 36 50/500 66261130840 50/250 66261123610 25/125 66261123616 x 16-1/2 40 66261123609 66261123615 80 66261131640 66261131646 66261123608 66261123614 100 66261131639 66261131645 120 66261131644 150 66261131643 180 66261131636 66261131642 220 66261131641 2-3/4 36 50/500 50/250 66261123622 x 17-1/2 40 66261123621 80 66261131652 66261123620 100 66261131651 66261126512 120 66261131650 150 66261131649 180 66261131648 66261126511 220 66261131647 95
9 x 11 Paper Sheet Job Packs A line of abrasive sheets for general contractors, small light contractors, institutional and serious do-it-yourselfers. Job Packs Packaging highlights Tri-lingual, job-specific application information Durable packages Norton 3X N0-Fil Paper Sheet Job Packs Open coat, premium aluminum oxide abrasive grain Non-pigmented stearate coating High-strength, fiber-reinforced, latex-saturated paper backing Full resin adhesive bond Hard, tough; provides a free cutting action for quick initial cut and maximum life Provides maximum resistance to clogging for longer life especially when sanding soft materials Tear resistant; provides exceptional flexibility when folding to get into corners and crevices Provides exceptional resistance to abrasive grain shedding especially when folding to sand into corners; long life MultiSand Paper Sheet Job Packs Aluminum oxide open coat Versatile; for hand or machine sanding wood, metal, plastic and Extensive, P-graded grit range fiberglass and for removing old paint (P36 P220 grit) Simplifies selection Better product visibility; minimize waste and damage Portable; ideal for showroom merchandising and carrying to the job site WoodSand Paper Sheet Job Packs Natural garnet grain The choice when preparing bare wood surfaces for stains or finishes SandWet Paper Sheet Job Packs Sharp silicon carbide abrasive Ideal for wet, oil or dry sanding primer, sealer, varnish, lacquer, Waterproof A-wt backing design enamel and other topcoats 96 NORTON 3X MULTISAND WOODSAND SANDWET STD. JOB PACK STD. JOB PACK JOB PACK JOB PACK SIZE GRIT PKG. UPC NO. PKG. UPC NO. UPC NO. UPC NO. 9 x 11 36 200* 250 07660700361 50 07660700360 60 07660702642 07660701624 80 07660702641 07660700359 07660701584 100 07660702640 07660700358 07660701583 120 07660702639 07660700357 07660701582 150 07660702638 07660700356 07660701581 180 07660702637 07660700355 07660701580 220 07660702636 07660700354 07660701579 07660701226 320 07660702633 400 07660702632 assorted 07660700365 WATERPROOF * PACKED 20 SHEETS PER JOB PACK, 10 JOB PACKS PER STANDARD PACKAGE. PACKED 25 SHEETS PER JOB PACK, 10 JOB PACKS PER STANDARD PACKAGE.