General Description The series are monolithic integrated circuits designed as fixed-voltage regulators for a wide variety of applications including local, on-card regulation. This series of regulators are complete with internal current limiting, thermal shutdown protection, and safe-area compensation which make them virtually immune from output overload. If adequate heat sinking are provided, these regulators can deliver output currents up to 1.0A. The series are available in two standard plastic packages: TO-220-3 and TO-252-2 (1). Features Constant Output Current up to 1.0A Fixed Output Voltages of 5V, 6V, 8V, 9V and 12V Output Voltage Tolerances of ±5% over the Full Temperature Range Internal Short Circuit Current-limiting Internal Thermal Overload Protection Applications Consumer Electronics Microprocessor Power Supply Mother Board I/O Power Supply TO-220-3 TO-252-2 (1) Figure 1. Package Types of 1
Pin Configuration T Package (TO-220-3) D Package (TO-252-2 (1)) 3 2 OUTPUT GND 3 2 OUTPUT GND 1 INPUT 1 INPUT Figure 2. Pin Configuration of (Top View) Pin Description Pin Number Pin Name Function 1 INPUT Voltage Input 2 GND Ground 3 OUTPUT Voltage Output 2
Functional Block Diagram INPUT Q9 R9 Q14 R16 Q21 D1 Zener Q24 R1 Q18 C1 R20 R21 R12 R17 R23 Q3 Q6 OUTPUT Q1 Q4 R3 Q7 Q10 Q11 R7 Q16 Q22 R18 R2 2 R4 R14 R5 Q8 R11 R15 Q2 Q5 R6 Q13 Q15 C2 Q23 R19 Q19 Q12 Q17 Q20 R2 R8 R10 R13 GND Figure 3. Functional Block Diagram of 3
Ordering Information - Circuit Type Output Voltage 05: 5V 06: 6V 08: 8V 09: 9V 12:12V E1: Lead Free Blank: Tin Lead TR: Tape and Reel Blank: Tube Package T: TO-220-3 D: TO-252-2 (1) Package TO-220-3 TO-252-2 (1) Temperature Range -40 to 125 o C -40 to 125 o C Part Number Marking ID Tin Lead Lead Free Tin Lead Lead Free Packing Type AZ7805T AZ7805T-E1 AZ7805T AZ7805T-E1 Tube AZ7806T AZ7806T-E1 AZ7806T AZ7806T-E1 Tube AZ7808T AZ7808T-E1 AZ7808T AZ7808T-E1 Tube AZ7809T AZ7809T-E1 AZ7809T AZ7809T-E1 Tube AZ7812T AZ7812T-E1 AZ7812T AZ7812T-E1 Tube AZ7805D AZ7805D-E1 AZ7805D AZ7805D-E1 Tube AZ7805DTR AZ7805DTR-E1 AZ7805D AZ7805D-E1 Tape & Reel AZ7806D AZ7806D-E1 AZ7806D AZ7806D-E1 Tube AZ7806DTR AZ7806DTR-E1 AZ7806D AZ7806D-E1 Tape & Reel AZ7808D AZ7808D-E1 AZ7808D AZ7808D-E1 Tube AZ7808DTR AZ7808DTR-E1 AZ7808D AZ7808D-E1 Tape & Reel AZ7809D AZ7809D-E1 AZ7809D AZ7809D-E1 Tube AZ7809DTR AZ7809DTR-E1 AZ7809D AZ7809D-E1 Tape & Reel AZ7812D AZ7812D-E1 AZ7812D AZ7812D-E1 Tube AZ7812DTR AZ7812DTR-E1 AZ7812D AZ7812D-E1 Tape & Reel BCD Semiconductor's Pb-free products, as designated with "E1" suffix in the part number, are RoHS compliant. 4
Absolute Maximum Ratings (Note 1) Parameter Symbol Value Unit Input Voltage V IN 20 V Lead Temperature (Soldering, 10sec) T LEAD 260 o C Power Dissipation P D Internally Limited W Operating Junction Temperature T J 150 o C Storage Temperature Range T STG -65 to 150 o C Thermal Resistance θ JA TO-220-3 60 TO-252-2 (1) 100 o C/W ESD (Human Body Model) ESD 3500 V ESD (Machine Model) ESD 500 V Note 1: Stresses greater than those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "Recommended Operating Conditions" is not implied. Exposure to "Absolute Maximum Ratings" for extended periods may affect device reliability. Recommended Operating Conditions Parameter Symbol Min Max Unit AZ7805 15 Input Voltage AZ7806 15 AZ7808 V IN 15 AZ7809 15 AZ7812 17 V Operating Junction Temperature Range T J -40 125 o C 5
Electrical Characteristics AZ7805 (V I =10V, I O =1A, T J =-40 to 125 o C, unless otherwise specified.) Parameter Symbol Conditions Min Typ Max Unit T Output Voltage V J =25 o C 4.9 5.0 5.1 O V I O =5mA to 1A, V I =7.5 to 15V, P D 15W 4.8 5.0 5.2 Line Regulation V RLINE V I =8V to 15V, I O =1A, T J =25 o C 1 30 mv Load Regulation V RLOAD V I =10V, I O =5mA to 1A, T J =25 o C 10 35 mv Quiescent Current I Q V I =10V, I O =0 3.2 6.0 ma Quiescent Current Change I Q V I =8V to 15V, I O =500mA, T J =25 o C 0.3 0.8 I O =5mA to 1A, T J =25 o C 0.08 0.5 ma Ripple Rejection V I / V O V I =8V to 15V, f=120hz, I O =300mA 63 73 db Dropout Voltage V DROP V O /V O =1%, I O =1A, T J =25 o C 2.0 V Output Noise Voltage N O f=10hz to 100KHz, T A =25 o C 10 µv/v O Output Resistance R O f=1.0khz 10 mω Short Circuit Current I SC V I =15V, T A =25 o C 0.8 A Peak Output Current I PK V I =10V, T J =25 o C 2.2 A Output Voltage Drift V O / T 0.3 mv/ o C AZ7806 (V I =11V, I O =1A, T J =-40 to 125 o C, unless otherwise specified.) Parameter Symbol Conditions Min Typ Max Unit T Output Voltage V J =25 o C 5.88 6.0 6.12 O I O =5mA to 1A, V I =8.6 to 15V, P D 15W 5.76 6.0 6.24 V Line Regulation V RLINE V I =9V to 15V, I O =1A, T J =25 o C 1.6 30 mv Load Regulation V RLOAD V I =11V, I O =5mA to 1A, T J =25 o C 20 37 mv Quiescent Current I Q V I =11V, I O =0 3.3 6.0 ma Quiescent Current Change I Q V I =9V to 15V, I O =500mA, T J =25 o C 0.3 0.8 I O =5.0mA to 1A, T J =25 o C 0.08 0.5 ma Ripple Rejection V I / V O V I =9V to 15V, f=120hz, I O =300mA 58 65 db Dropout Voltage V DROP V O /V O =1%, I O =1A, T J =25 o C 2.0 V Output Noise Voltage N O f=10hz to 100KHz, T A =25 o C 10 µv/v O Output Resistance R O f=1.0khz 10 mω Short Circuit Current I SC V I =15V, T A =25 o C 0.8 A Peak Output Current I PK V I =11V, T J =25 o C 2.2 A Output Voltage Drift V O / T 0.3 mv/ o C 6
Electrical Characteristics (Continued) AZ7808 (V I =14V, I O =1A, T J =-40 to 125 o C, unless otherwise specified.) Parameter Symbol Conditions Min Typ Max Unit T Output Voltage V J =25 o C 7.8 8.0 8.2 O I O =5mA to 1A, V I =10.6 to 15V, P D 15W 7.7 8.0 8.3 V Line Regulation V RLINE V I =11V to 15V, I O =1A, T J =25 o C 2 30 mv Load Regulation V RLOAD V I =14V, I O =5mA to 1A, T J =25 o C 15 37 mv Quiescent Current I Q V I =14V, I O =0 3.3 6.0 ma V I =10.6V to 15V, I O =500mA, T J =25 o C 0.8 Quiescent Current Change I Q I ma O =5.0mA to 1A, T J =25 o C 0.5 Ripple Rejection V I / V O V I =11V to 15V, f=120hz, I O =300mA 56 62 db Dropout Voltage V DROP V O /V O =1%, I O =1A, T J =25 o C 2.0 V Output Noise Voltage N O f=10hz to 100KHz, T A =25 o C 10 µv/v O Output Resistance R O f=1.0khz 10 mω Short Circuit Current I SC V I =15V, T A =25 o C 0.8 A Peak Output Current I PK V I =13V, T J =25 o C 2.2 A Output Voltage Drift V O / T 0.4 mv/ o C AZ7809 (V I =15V, I O =1A, T J =-40 to 125 o C, unless otherwise specified. ) Parameter Symbol Condition Min Typ Max Unit T Output Voltage V J =25 o C 8.65 9.0 9.35 O I O =5mA to 1A, V I =11.5 to 15V, P D 15W 8.55 9.0 9.45 V Line Regulation V RLINE V I =11.5V to 15V, I O =1A, T J =25 o C 1.8 30 mv Load Regulation V RLOAD V I =15V, I O =5mA to 1A, T J =25 o C 14 36 mv Quiescent Current I Q V I =15V, I O =0 3.4 8.0 ma V I =11.5V to 15V, I O =500mA, T J =25 o C 1.0 Quiescent Current Change I Q I ma O =5.0mA to 1A, T J =25 o C 0.5 Ripple Rejection V I / V O V I =12V to 15V, f=120hz, I O =300mA 56 61 db Dropout Voltage V DROP V O /V O =1%, I O =1A 2.0 V Output Noise Voltage N O f=10hz to 100KHz, T A =25 o C 10 µv/v O Output Resistance R O f=1.0khz 12 mω Short Circuit Current I SC V I =15V, T A =25 o C 0.8 A Peak Output Current I PK V I =14V, T J =25 o C 2.2 A Output Voltage Drift V O / T 0.5 mv/ o C 7
Electrical Characteristics (Continued) AZ7812 (V I =17V, I O =1A, T J =-40 to 125 o C, unless otherwise specified.) Parameter Symbol Condition Min Typ Max Unit T Output Voltage V J =25 o C 11.5 12 12.5 O V I O =5mA to 1A, V I =14.8 to 17V, P D 15W 11.4 12 12.6 Line Regulation V RLINE V I =14.5 to 18V, I O =1A, T J =25 o C 2.2 30 mv Load Regulation V RLOAD V I =17V, I O =5mA to 1A, T J =25 o C 8.1 60 mv Quiescent Current I Q V I =17V, I O =0 3.4 6.5 ma Quiescent Current V I =14.5 to 17V, I O =1A, T J =25 o C 0.7 I Change Q I O =5.0mA to 1A, T J =25 o C 0.5 ma Ripple Rejection V I / V O V I =15V to 17V, f=120hz, I O =300mA 55 60 db Dropout Voltage V DROP V O /V O =1%, I O =1A, T A =25 o C 2.0 V Output Noise Voltage N O f=10hz to 100KHz, T A =25 o C 10 µv/v O Output Resistance R O f=1.0khz 13 mω Short Circuit Current I SC V I =15V, T A =25 o C 0.8 A Peak Output Current I PK V I =17V, T J =25 o C 2.2 A Output Voltage Drift V O / T 0.8 mv/ o C 8
Typical Performance Characteristics 2.75 5.16 Peak Output Current (A) 2.50 2.25 2.00 1.75 1.50 1.25 1.00 0.75 0.50 0.25 AZ7805 25 o C 125 o C -40 o C Output Voltage (V) 5.12 5.08 5.04 5.00 4.96 4.92 4.88 AZ7805 0.00 2 3 4 5 6 7 8 9 10 11 12 13 4.84 0 20 40 60 80 100 120 Input-Output Differential Voltage (V) Junction Temperature ( o C) Figure 4. Peak Output Current vs. Input-Output Differential Voltage Figure 5. Output Voltage vs. Junction Temperature 3.6 100 3.5 90 Quiescent Current (ma) 3.4 3.3 3.2 3.1 3.0 PSRR (db) 80 70 60 50 40 30 2.9 20 2.8 10 2.7-20 0 20 40 60 80 100 120 Junction Temperature ( o C) 0 10 100 1k 10k 100k 1M Frequency (Hz) Figure 6. Quiescent Current vs. Junction Temperature Figure 7. PSRR vs. Frequency 9
Typical Performance Characteristics (Continued) 18 6 16 Package: TO-220-3 Heatsink Size: 45*43mm 2 5 Power Dissipation (W) 14 12 10 8 6 Output Voltage (V) 4 3 2 1 AZ7805 V IN =10V, I OUT =5mA C IN = 0.33µF, C OUT =0.1µF 4-40 -20 0 20 40 60 80 100 120 Case Temperature ( o C) 0 0 20 40 60 80 100 120 140 160 180 Junction Temperature ( o C) Figure 8. Power Dissipation vs. Case Temperature Figure 9. Thermal Shutdown Protection 10
Typical Application V IN INPUT OUTPUT V OUT 0.33µF GND 0.1µF Figure 10. Typical Application of 11
Mechanical Dimensions TO-220-3 Unit: mm(inch) 9.660(0.380) 10.660(0.420) 3.560(0.140) 4.060(0.160) 2.580(0.102) 3.380(0.133) 0.550(0.022) 1.350(0.053) 1.850(0.073) 0.200(0.008) 1.500(0.059) 8.520(0.335) 9.520(0.375) 27.880(1.098) 30.280(1.192) 14.230(0.560) 16.510(0.650) 3 7 3.560(0.140) 4.820(0.190) 2.080(0.082) 2.880(0.113) 7 1.160(0.046) 1.760(0.069) 0.381(0.015) 60 0.813(0.032) 8.763(0.345) 60 2.540(0.100) 0.381(0.015) 2.540(0.100) 0.356(0.014) 0.406(0.016) 12
Mechanical Dimensions (Continued) TO-252-2(1) Unit: mm(inch) 1.350(0.053) 1.650(0.065) 6.350(0.250) 6.650(0.262) 5.200(0.205) 5.400(0.213) 0.430(0.017) 0.580(0.023) 2.200(0.087) 2.400(0.094) 4.300(0.169) 5.400(0.212) 9.500(0.374) 9.900(0.390) 0.600(0.024) 0.900(0.035) 2.300TYP 4.500(0.177) 4.700(0.165) 0.000(0.000) 0.127(0.005) 5 0.700(0.028) 0.900(0.035) 0.500(0.020) 0.700(0.028) 1.400(0.055) 1.780(0.070) 3 4 5 8 0.430(0.017) 0.580(0.023) 5.400(0.213) 5.700(0.224) 2.550(0.100) 2.900(0.114) 3.800REF(0.150REF) 4.800(0.189) 6.500(0.256) 13
http://www.bcdsemi.com IMPORTANT NOTICE reserves the right to make changes without further notice to any products or specifications herein. does not assume any responsibility for use of any its products for any particular purpose, nor does assume any liability arising out of the application or use of any its products or circuits. does not convey any license under its patent rights or other rights nor the rights of others. MAIN SITE - Wafer Fab Shanghai SIM- 800, Yi Shan Road, Shanghai 200233, China Tel: +86-21-6485 1491, Fax: +86-21-5450 0008 - IC Design Group Advanced Analog Circuits (Shanghai) Corporation 8F, Zone B, 900, Yi Shan Road, Shanghai 200233, China Tel: +86-21-6495 9539, Fax: +86-21-6485 9673 REGIONAL SALES OFFICE Shenzhen Office Shanghai SIM-BCD Semiconductor Manufacturing Co., Ltd. Shenzhen Office Advanced Analog Circuits (Shanghai) Corporation Shenzhen Office Room E, 5F, Noble Center, No.1006, 3rd Fuzhong Road, Futian District, Shenzhen 518026, China Tel: +86-755-8826 7951 Fax: +86-755-8826 7865 Taiwan Office BCD Semiconductor (Taiwan) Company Limited 4F, 298-1, Rui Guang Road, Nei-Hu District, Taipei, Taiwan Tel: +886-2-2656 2808 Fax: +886-2-2656 2806 USA Office BCD Semiconductor Corporation 30920 Huntwood Ave. Hayward, CA 94544, U.S.A Tel : +1-510-324-2988 Fax: +1-510-324-2788