TLHY58, TLHG58, TLHP58 High Efficiency LED, Ø 5 mm Untinted Non-Diffused Package DESCRIPTION 9223 The TLH.58 series was developed for standard applications which need a very small radiation angle or a very high luminous intensity. It is housed in a 5 mm untinted non-diffused plastic package. The very small viewing angle of these devices provide a very high luminous intensity. The and LEDs are categorized in luminous intensity and additionally in wavelength groups. That allows users to assemble LEDs with uniform appearance. PRODUCT GROUP AND PACKAGE DATA Product group: LED Package: 5 mm Product series: standard Angle of half intensity: ± 4 FEATRUES Standard T-¾ package Small mechanical tolerances Suitable for DC and high peak current Very small viewing angle Very high intensity Luminous intensity categorized Yellow and color categorized ESD-withstand voltage up to 2 kv according to JESD22-A4-B Material categorization: For definitions of compliance please see www.vishay.com/doc?9992 APPLICATIONS Status lights Off/on indicator Lightpipe Outdoor display Medical instruments Maintenance lights Legend lights PARTS TABLE PART COLOR LUMINOUS INTENSITY WAVELENGTH FORWARD VOLTAGE (mcd) at I F (nm) at I F (V) at I F MIN. TYP. MAX. MIN. TYP. MAX. MIN. TYP. MAX. TECHNOLOGY TLHY58 Yellow 25-2 58-594 - 2.4 3 2 GaAsP on GaP TLHG58 Green 43 7-2 562-575 - 2.4 3 2 GaP on GaP TLHP58 Pure 25 85-2 555-565 - 2.4 3 2 GaP on GaP ABSOLUTE MAXIMUM RATINGS (T amb = 25 C unless otherwise specified) TLHY58, TLHG58, TLHP58 PARAMETER TEST CONDITION SYMBOL VALUE UNIT Reverse voltage V R 6 V DC forward current T amb 65 C I F 3 ma Surge forward current μs I FSM A Power dissipation T amb 65 C P V mw Junction temperature T j C Operating temperature range T amb - 4 to + C Storage temperature range T stg - 55 to + C Soldering temperature t 5 s, 2 mm from body T sd 26 C Thermal resistance junction/ambient R thja 35 K/W Rev..8, 29-Apr-3 Document Number: 833 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9
TLHY58, TLHG58, TLHP58 OPTICAL AND ELECTRICAL CHARACTERISTICS (T amb = 25 C, unless otherwise specified) TLHY58, YELLOW PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT Luminous intensity () I F = 2 ma I V 25 - mcd Dominant wavelength I F = ma d 58-594 nm Peak wavelength I F = ma p - 585 - nm Angle of half intensity I F = ma - ± 4 - deg Forward voltage I F = 2 ma V F - 2.4 3 V Reverse voltage I R = μa V R 6 5 - V Junction capacitance V R = V, f = MHz C j - 5 - pf () In one packing unit I Vmin. /I Vmax..5 OPTICAL AND ELECTRICAL CHARACTERISTICS (T amb = 25 C, unless otherwise specified) TLHG58, GREEN PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT Luminous intensity () I F = 2 ma I V 43 7 - mcd Dominant wavelength I F = ma d 562-575 nm Peak wavelength I F = ma p - 565 - nm Angle of half intensity I F = ma - ± 4 - deg Forward voltage I F = 2 ma V F - 2.4 3 V Reverse voltage I R = μa V R 6 5 - V Junction capacitance V R = V, f = MHz C j - 5 - pf () In one packing unit I Vmin. /I Vmax..5 OPTICAL AND ELECTRICAL CHARACTERISTICS (T amb = 25 C, unless otherwise specified) TLHP58, PURE GREEN PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT Luminous intensity () I F = 2 ma I V 25 85 - mcd Dominant wavelength I F = ma d 555-565 nm Peak wavelength I F = ma p - 555 - nm Angle of half intensity I F = ma - ± 4 - deg Forward voltage I F = 2 ma V F - 2.4 3 V Reverse voltage I R = μa V R 6 5 - V Junction capacitance V R = V, f = MHz C j - 5 - pf () In one packing unit I Vmin. /I Vmax..5 LUMINOUS INTENSITY CLASSIFICATION GROUP LIGHT INTENSITY (mcd) STANDARD MIN. MAX. BB 43 86 CC 575 5 DD 75 5 EE 2 FF 35 27 Luminous intensity is tested at a currenulse duration of 25 ms and an accuracy of ± %. The above type numbers represent the order groups which include only a few brightness groups. Only one group will be shipped on each bag (there will be no mixing of two groups on each bag). In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped in any one bag. In order to ensure availability, single wavelength groups will not be orderable. Rev..8, 29-Apr-3 2 Document Number: 833 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9
TLHY58, TLHG58, TLHP58 TYPICAL CHARACTERISTICS (T amb = 25 C, unless otherwise specified) 6 5 4 3 2 /T =. = µs 95 46 2 4 6 8 T amb - Ambient Temperature ( C). 2 4 6 8 95 3 V F - Forward Voltage (V) Fig. - Forward Current vs. Ambient Temperature Fig. 4 - Forward Current vs. Forward Voltage /T =..5.2.2 T amb 85 C.5.. 95 25 - Pulse Length (ms)..6.2.8.4 95 3 I F = ma 2 4 6 8 T amb - Ambient Temperature ( C) Fig. 2 - Forward Current vs. Pulse Length Fig. 5 - Relative Luminous Intensity vs. Ambient Temperature - Relative Radiant Intensity I V rel..9.8.7.6 95 22.4.2 2 3 4 5 6 7 8 ϕ - Angular Displacement I spec - Specific Luminous Intensity 2.4 2..6.2.8.4 2 5 2 5 95 26.5.2..5.2 I F /T Fig. 3 - Relative Luminous Intensity vs. Angular Displacement Fig. 6 - Relative Luminous Intensity vs. Forward Current/Duty Cycle Rev..8, 29-Apr-3 3 Document Number: 833 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9
TLHY58, TLHG58, TLHP58.. 95 33.6.2.8.4 95 35 I F = ma 2 4 6 8 T amb - Ambient Temperature ( C) Fig. 7 - Relative Luminous Intensity vs. Forward Current Fig. - Relative Luminous Intensity vs. Ambient Temperature I rel - Relative Intensity.2..8.6.4.2 55 57 59 6 63 95 39 λ - Wavelength (nm) 65 I spec - Specific Luminous Intensity 2.4 2..6.2.8.4 2 5 2 5 I F 95 263.5.2..5.2 /T Fig. 8 - Relative Intensity vs. Wavelength Fig. - Specific Luminous Intensity vs. Forward Current. 2 95 34 V F - Forward Voltage (V) 4 6 /T =. = µs 8 95 37. Fig. 9 - Forward Current vs. Forward Voltage Fig. 2 - Relative Luminous Intensity vs. Forward Current Rev..8, 29-Apr-3 4 Document Number: 833 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9
TLHY58, TLHG58, TLHP58 I rel - Relative Intensity.2..8.6.4.2 I Spec - Specific Luminous Flux 2.4 2..6.2.8.4 52 54 56 58 6 95 38 λ - Wavelength (nm) 62 95 26 Fig. 3 - Relative Intensity vs. Wavelength Fig. 6 - Specific Luminous Intensity vs. Forward Current. 2 3 4 95 9988 V F - Forward Voltage (V) 5.. 95 9998 Fig. 4 - Forward Current vs. Forward Voltage Fig. 7 - Relative Luminous Intensity vs. Forward Current 2..6.2.8.4 2 4 6 8 95 999 T amb - Ambient Temperature ( C) I rel - Relative Intensity.2..8.6.4.2 95 325 5 52 54 56 58 λ - Wavelength (nm) 6 Fig. 5 - Relative Luminous Intensity vs. Ambient Temperature Fig. 8 - Relative Intensity vs. Wavelength Rev..8, 29-Apr-3 5 Document Number: 833 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9
TLHY58, TLHG58, TLHP58 PACKAGE DIMENSIONS in millimeters C A Ø 5.5 ±.5 Parabolic lens min. 2.7 ±.3 35.7 ±.55 (4.9) 7.7 ±.5 8.7 ±.3 <.7. ±.25 Ø 5 ±.5 Area nolane.5 +.5 -.5.5 +.5 -.5 technical drawings according to DIN specifications Drawing-No.: 6.544-53.-4 Issue: 4; 9.5.9 95 476 2.54 nom. Rev..8, 29-Apr-3 6 Document Number: 833 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9
Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extenermitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2/65/EU of The European Parliament and of the Council of June 8, 2 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 22/95/EC. We confirm that all the products identified as being compliant to Directive 22/95/EC conform to Directive 2/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS79A standards. Please note that some Vishay documentation may still make reference to the IEC 6249-2-2 definition. We confirm that all the products identified as being compliant to IEC 6249-2-2 conform to JEDEC JS79A standards. Revision: 2-Oct-2 Document Number: 9