MDF 1-Piece / 3D Laminate (RTF)

abinet Doors & s MDF 1-Piece / 3D Laminate (RTF) MDF 1-Piece Doors & - Standard Style: 500* Style: 501* Style: 500 Style: 501 Raised Panel Style: 518 Style: 521 Style: 522 Style: 580* See next page for thickness and profile options. Style: 590* Style: 525 Style: 570 Style: 580 Style: 590 Style: 515 Style: 516 Style: 517 Style: 519 14-1 Style: 522* - 2 518 shown with 2¼" wide top and bottom rails. Style: 570* Style: 525* Style: 518* Style: 523 (Phone) 1-800-237-1326 6:00AM - 4:30PM ST (24 Hour Fax) 1-608-781-3667

MDF 1-Piece / 3D Laminate (RTF) abinet Doors & s MDF 1-Piece Doors & - Standard Style: 520 Style: 528 Style: 529 Style: 530 MDF & 3D Laminate (RTF) Raised Panel (2 ) s The dashed line on the profile drawings indicate the difference in thickness from the Look D (1" thick) to the Look (¾" thick). Please see Section 15 for more infomation on Looks. All Raised Panel Profiles are shown with the D33 Outside Edge Profile. 300-32RP 300-32RPD 302-32RP 302-32RPD 301-25RP 301-25RPD 99.7% American Made 14-2

MDF 1-Piece / 3D Laminate (RTF) abinet Doors & s MDF 1-Piece Doors - Quarter ircle Style: 526L Style: 526R Style: 524L Style: 524R Style: 527L Style: 527R MDF 1-Piece Doors - Quarter ircle - Frame & Mullions Style: 526L Style: 526R Style: 524L Style: 524R Style: 527L Style: 527R Style: 526L Style: 526R 14-3 Style: 524L Style: 524R Style: 527L Style: 527R (Phone) 1-800-237-1326 6:00AM - 4:30PM ST (24 Hour Fax) 1-608-781-3667

MDF 1-Piece / 3D Laminate (RTF) abinet Doors & s MDF & 3D Laminate (RTF) Door Notes 1) Maximum Sizes The maximum size of a raw MDF product is 48"W x 96"H. The maximum size of an RTF product is 40"W x 90"H. Products with a specified grain direction that exceed 40" in width will be manufactured with Horizontal Grain. 2) PR40 enter Panel Profile Not available in raw MDF, must be used with an RTF pattern. Maximum size for any RTF product using the PR40 enter Panel Profile is 18"W x 36"H. If looking for something larger, please consider using our SR92/PR41 profile. If looking for a raw MDF door with a flat panel Look, please also refer to our 5-Piece Raw MDF Door section. 3) PR41 enter Panel Profile Maximum size for a Raw MDF door or a door using 3D Laminate is 24"W x 42"H. 4) Stile & Rail Minimum Width The minimum width, at the narrowest point, for an outside stile or rail is 1¼". 5) Style 500 an be paired with the #1803, #1804 and #2211 Finger Pull Moldings (D7 outside edge only). Finger Pull Moldings are shown on page F8-1. For raw MDF slab door with maple wood veneer edgbanding please see Section 12 - Veneered & Edgebanded Doors. 6) Style 501 The depth of the routing is the same as that of door Style 522, which is (approximately) 5/32". 7) Style 522 Hinge bores are available on the fluted side of the Style 522 door as well as the side opposite the flutes. When ordering, indicate which side of the door gets bored. 8) Style 525 Only available with the SR24/PR24 Profiles. The placement of the routing is as described on page 8-4 for the Style 1025 hardwood door. 9) Style 570 & 580 Only available with the SR24/PR24 Profiles. 10) Style 590 Only available with the SR24/PR24 Profiles. The placement of the routing is as described on page 8-1 for the Style 1050 hardwood door. 11) es es refer to the number of N Router cycles required to complete a door. omplex doors require more es. 12) MDF Outside Edge Profiles Most outside edge profiles shown in Section E14 are available for MDF doors and drawer fronts. Limitations apply for raised panel drawer fronts, see the compatibility chart on our website. If ordering an applied molding edge on an MDF product, the applied molding will utilize a Maple-Hard / Soft-Mixed Paint Grade Wood Species. The indicates Stile & Rail and enter Panel Profile combinations that are available on products using 3D Laminate 13) 3D Laminate (RTF) (RTF). See Section E14 for compatible Outside Edge Profiles. harges are calculated using the total square footage of the door, whether the door is a frame or mullion. 14) Panel Opening MDF & RTF doors and drawer fronts are a one piece constructed product, if choosing a door style with a raised or flat panel, the minimum panel opening size that can be accommodated would be 1". 15) True Divided Lites Not available with MDF and RTF Frame and Mullion doors. 16) Frame & Mullion Doors The routed recessed areas on the back of 3D Laminate/RTF frame and mullion doors are painted to blend with the color/ pattern on the back side of the frame or mullion door. The backs can be either white or almond melamine or they can match the face of the 3D Laminate/RTF door. Glass openings are routed to follow the contour of the shape for Styles 523, 524L, 524R, 526L, 526R, 527L, 527R, 528. Rubber Glass Retainer is available with MDF/ 3D Laminate (RTF) Frame & Mullion doors. See page E16-11. The standard method of placement for mullions shall be to equally divide the openings, unless specified otherwise. ustom placements are available, please provide a drawing to quote. 17) D7 Edge D7 can be used in combination with another outside edge to result in profiles that vary from side to side. 18) Finishing See Finishing Methods for more information on pre-finishing MDF with Primed Only for Paint or Solid Tone olors. Style 500/500* are the only One-Piece MDF door styles that accept PFR. 19) enter Panel Face Routing - Raw MDF Style 500/500* can accept all PFR patterns. PFR 3D Lamiante/RTF Style 500/500* can accept the following PFR patterns: PFR100, PFR500, PFR600, PFR700, PFR1900 and PFR2100. 20) Appliance Panels Style A and Style are the only options available. See Section M12. An RTF door in a mitered lazy susan configuration will look like the drawing on page F6-1. (The back corners are clipped.) In order to facilitate the pressing operation, the mitered doors can not come to a sharp point. 21) Lazy Susan Doors Lazy susan doors will come to you a 1 /16" smaller in width than the size you order. When you assemble the pair, the size will be correct because you are matching up the inside corners. FP100 is available on all ¾" or 1" MDF and RTF doors and drawer fronts. 22) Finger Pulls FP200 is not an option on ¾" MDF and RTF drawer front styles M300-32RP, M301-25RP and M302-32RP. White High Gloss Foil is not an option for ¾" or 1" thick MDF doors or drawer fronts with an FP200 Finger Pull. FP300 and FP400 are not available with RTF. 23) Radius orners See Section G11. 24) Hinge oring See Section F1. MDF & 3D Lamiante (RTF) Notes 1) Looks MDF and RTF Raised Panel s are available as LOOK (¾ thick) and LOOK D (1" thick). These LOOKS, in relation to a door can be found in Section 15. 2) Outside Edge Profiles Reference the compatibility chart on our website under Technical Information to determine the outside edge profile options available for MDF and RTF drawer fronts. 3) Style 500* s Style 500* drawer fronts are similar to a LOOK A drawer front, see Section 15. 4) Style 500* The minimum size for a Style 500* drawer fronts is 3"x 3". If your drawer front is below the 3" minimum Minimum for Pricing required, a 2 square foot minimum per item, for pricing will apply. 5) Applied Molding For solid wood applied molding outside edge options on Raw MDF, please reference Notes, Applied Molding Outside Profiles, page E14-7. Price lass ode 1001 will be used. Add the Lineal Inch price per Price lass, plus $2.00 per Outside Edge Options Joint for the applied molding edge. Lineal inch pricing can be found in Section E7. 6) Finishing See Finishing Methods for more information on pre-finishing MDF with Primed Only for Paint or Solid Tone olors. 7) Vertical Grain Leather White Alligator and Peppered rosswood have distinct grain patterns. As such, when using these patterns, Walzraft recommends Vertical Grain on drawer fronts when used in conjunction with Vertical Grain doors. 99.7% American Made 14-4

abinet Doors & s MDF 1-Piece / 3D Laminate (RTF) MDF - Raw & 3D Laminate (RTF) Door & Price alculation 1) Determine the # of square feet in your door or drawer front by multiplying the W x H 144. 2) Determine your Door Style and the number of es for that style. See the following page for an explanation of es. The number of passes can be determined by looking at the profile drawings in Section E16. 3) Refer to the chart on the following page to find the square foot price for your raw MDF Door or based on the Style and # of es. Multiply the square footage of the door or drawer front by the price per square foot to arrive at the cost of the raw MDF door. For pricing purposes, there is a 1 square foot minimum per piece for doors, frame doors and the 518* drawer front. Style 500* and Raised Panel drawer fronts have a ½ square foot minimum per item for pricing. 4) To determine the price for a 3D Laminate (RTF) Door or, you must ADD the appropriate square foot up-charge for the foil color chosen to the raw MDF Door or Square Foot price. Refer to the Foil olor price grid on the following page. Multiply this new calculated square foot price by the # of square feet in your MDF Door or to determine 3D Laminate (RTF) Door or cost. 5) To determine the price for a 3D Laminate Door or with matching 3D Laminate (RTF) back, please follow steps 1 through 4 above and then add the appropriate square foot up-charge for the matching 3D Laminate back. Use the RSS square foot price for the 3D Laminate with Phenolic back sheet stock in your chosen color (see Sheet Stock Section K3) and add charge per square foot for ustom Pressing one side. For packaging purposes, RTF products are considered finished product. MDF - Raw & 3D Laminate (RTF) Frame & Mullion Door Pricing Price alculation for Raw MDF or 3D Laminate (RTF) Frame & Mullion Door To price a frame door in Raw MDF, use the same steps as above, but use the Frame & Mullion column from the grid on the next page for your number of passes. In addition, if the door is an MDF mullion, add charge/lite. To price a frame door in 3D Laminate (RTF), use the same steps as above, but use the Frame & Mullion column from the grid on the next page for your number of passes. In addition, if the door is a 3D Laminate (RTF) mullion, add charge/lite. Add 30% for 1" thickness. 14-5 (Phone) 1-800-237-1326 6:00AM - 4:30PM ST (24 Hour Fax) 1-608-781-3667

MDF 1-Piece / 3D Laminate (RTF) abinet Doors & s How do I determine the number of es it takes to rout my door? The price of MDF and RTF doors is influenced by the complexity of the N routing that is required. In order to price a door, you will need to know how many es (N Router ycles) are made by the router. The number of es is listed on the profile drawings in Section E16. Raw MDF Square Foot Prices Minimum Width & Height Raised Panel 4 x 4 500 & 500* 3 x 3 515 7½ x 10 516 7½ x 10 517 7½ x 9¼ 518 & 518* 7½ x 7½ 519 7½ x 9¼ 520 7½ x 13¼ 521 12¾ x 7½ 523 7½ x 8 525 & 525* 8 x 6 528 7½ x 14½ 529 7½ x 14½ 530 7½ x 14½ 501 6 x 6 522 4 x 4 570 6⅞ x 6⅞ 580 6 x 6 590 4⅜ x 4⅜ 526L & 526R 8 x 10¼ 527L & 527R 8 x 10¼ 524L & 524R 8 x 8 One Two Three Four Five ontact Walzraft ustomer Support for pricing or complete our atalog Request Form to receive our latest Master Product Specifications & Wholesale Pricing atalog. Six Frame or Mullion 1" Thick Products: Add 30% to the ¾" Square Foot Price 3D Laminate (RTF) Pricing 3D Laminate (RTF) Foil olor Options Square Foot harge Foil Thickness 3D Laminate (RTF) Foil olor Options Square Foot harge Foil Thickness Almond rystal.012" Leather rown.016" Antique White.012" Leather White Alligator*.012" Arctic Ribbon*.014" Pearwood*.012" amboo*.012" Persian herry*.012" irds Eye Maple*.015" Pickled Maple*.012" lack rystal.012" Sculpted Wenge*.014" rushed Steel*.012" Solara Oak*.012" hocolate Pear*.012" Summer Flame*.012" Frosty White.012" Walnut*.016" Italian Macassar*.016" Peppered rosswood*.012" Italian Wenge*.016" White rystal.012" Italian Zebrano*.016" White High Gloss.022" Kensington Maple*.012" White Matte.016" Leather lack.016" White Woodgrain*.012" * These materials have a grain direction. Please specify Horizontal or Vertical Grain when ordering. 99.7% American Made 14-6

abinet Doors & s MDF 1-Piece / 3D Laminate (RTF) Raw MDF Door & onstruction and Ordering MDF doors and drawer fronts are constructed of premium, ¾" or 1" thick 48# MDF that is precision routed in the Door or Style and Profiles that you select. To Order MDF Doors or s... 1) Select one of the available Door Styles or Styles. 2) Select one of the available Stile & Rail / Panel Profile combinations (See Profiles Section E18). 3) Select an Outside Edge Profile (See Profiles Section E15). 3D Laminate (RTF) Door & onstruction and Ordering 3D Laminate (RTF) doors and drawer fronts are constructed of premium, ¾" or 1" thick 48# MDF with an Almond or White True Thermofused Melamine back or a matching 3D Laminate (RTF) back. When choosing a matching 3D Laminate (RTF) back, the product will be approximately 0.040" (1.02mm) thicker than normal. They are precision routed in the Door or Styles and Profiles that you select. The 3D Laminate (RTF) foil covers the face and edges of the doors and drawer fronts. To Order an 3D Laminate (RTF) Door... 1) Select one of the available Door or Styles. 2) Select one of the available Stile & Rail / Panel Profile combinations (See Profiles Section E18). 3) Select one of the available Outside Edge Profiles (See Profiles Section E15). 4) Select one of the available foil colors for the face and edges and also a color for the back. For the back, specify either Almond or White melamine or matching 3D Laminate (RTF). For wood grain foils, please specify either horizontal or vertical grain for the doors and drawer fronts. White High Gloss requires a special board for pressing and is only available with a white melamine back. 3D Laminate (RTF) leaning and are 3D Laminate (RTF) doors are built to need very little attention. We recommend that you use only warm soapy water (dish soap) to clean them. Never use anything with abrasive in it. If using stronger cleaning materials, always test a new cleaning solution on a small less conspicuous area before doing an entire kitchen. If 3D Laminate (RTF) doors are installed near a self cleaning oven, dishwasher or any other appliance emitting high heat, we suggest you open the cabinet doors to avoid heat exposure. 14-7 (Phone) 1-800-237-1326 6:00AM - 4:30PM ST (24 Hour Fax) 1-608-781-3667

MDF 1-Piece / 3D Laminate (RTF) abinet Doors & s Walzraft RTF / 3D Laminate and Approximate Wood Species & Finish Matches 3D Laminate (RTF) olor Wood Species & Grade Walzraft Stain / Finish Type Almond rystal MAPLE Hard / Soft - Mixed Paint Grade Tan - SolidTone Antique White MAPLE Hard / Soft - Mixed Paint Grade Eggshell - SolidTone Arctic Ribbon NA NA amboo AMOO aramelized - ¾" Only Vertical Grain Lt American Walnut - Wiping irds Eye Maple MAPLE irdseye Select / Premium Grade Fruitwood - SNW lack rystal MAPLE Hard / Soft - Mixed Paint Grade lack - SolidTone rushed Steel NA NA hocolate Pear EEH European Steamed Natural / Standard Grade rownstone V2 - ombination Frosty White MAPLE Hard / Soft - Mixed Paint Grade Pearl - SolidTone Kensington Maple NA NA Italian Macassar NA NA Italian Wenge WENGE Straight Grain Reconstituted Veneer rownstone - ombination Italian Zebrano NA NA Leather lack NA NA Leather rown NA NA Leather White Alligator NA NA Pearwood HERRY Select / Premium Grade Sunrise SNW Persian herry ALDER Select / Premium Grade Natural / lear oat (no stain) Pickled Maple NA NA Sculpted Wenge NA NA Solara Oak NA NA Summer Flame NA NA Walnut WALNUT Select / Premium Grade rown Oak - Wiping Peppered rosswood NA NA White rystal MAPLE Hard / Soft - Mixed Paint Grade lassic White - SolidTone White High Gloss NA NA White Matte MAPLE Hard / Soft - Mixed Paint Grade lassic White - SolidTone White Woodgrain OAK udget / Value Grade lassic White - SolidTone WoodGrain Approximate matches determined by Walzraft. 99.7% American Made 14-8