Equipm and Technical Guide for: IC21 (7721) Carp I Return to the Equipm and Technical Guide home page n 1/2" drill, variable speed, reversible, portable, corded 1/2" Hammer drill 10" adjustable wrench 10" C- clamp 10" sliding compound miter saw 10" table saw 10" vise grip pliers 100' 12AWG
extension cord 100-ft steel measuring tape 12" adjustable wrench 16 oz. claw hammer 1S 2 lb. sledge hammer 2' bar clamp 20 oz. claw hammer 1S 20" band saw 24-foot aluminum extension ladder 25-foot tape measure 1S 3' bar clamp 3/8" drill,
variable speed, portable 3/8" drill, variable speed, portable, reversable, cordless 30" spirit level 4' bar clamp 4-ft T- square 48" spirit level 5-cubicfoot wheelbarr ow 50' extension cord 6" C- clamp 6" slipjoint pliers 6' folding rule 6-foot step ladder
7-1/4" circular saw with machined base, eleric brake, LH & RH 8 lb. sledge hammer 8" adjustable wrench 8" bench duster brush 8" Needle nose pliers 8" steel t square 8-foot step ladder Air Compress er - portable or fixed, 100 ft. 3/8 air hose Bastard file Belt Sander
Bench grinder Block plane Broad Knife Carper framing square 1 Cats paw nail puller 10C Caulking gun Chalk line 1 Channel lock pliers Combinati on square Combinati on wrench set, 3/8" - 1-1/4" Computer, Windows 7, i5 processor, 4 GB RAM, 500
GB hard drive, CD/DVD- RW, 10/100 Ethernet, 17" LCD monitor Coping saw Cordless trim saw Crosscut hand saw Data projeor Door hanging kit w/ hole saw and bits Drill bit set for metal Drill bit set for wood Drill bit set, high speed, 1/16" - 1/2" Drill bit set, mason
Drill bit set, speed bore, 1/4" - 1-1/4" Dwall circle cutter Dwall corner Dwall hammer Dwall router w/zip Dwall saw Dwall screen Face shield Flat bar nail puller Germicida l cabinet for safety glass storage Grinder wheel dresser
Hacksaw Hard Hat 1S Hex key (Allen wrench) set, SAE and metric Jack plane Jig saw Joint Trowel Keyhole saw Laser level Long handled, roundpoint shovel Long handled, squarepoint shovel Longblade spade Mattock Metal cabinet for paint
storage Miter Guage Mud mixer Mud pan or hawk Nail sets, 1/32" to 1/8" curricul um NCCER - Construi on 1B Cost is associat ed with the number of Contren Series Textboo ks ordered. Vend or Stephen Healy, Pearson/Contren, stepen.healy@pearso n.com, 1-800-720-3870 xt.2 LEAs who offer Carpr y, Elerical Trades, and/or Mason at their schools are required to use the Contren Series Text, which is develope d in partnersh ip between Pearson and NCCER. The LEA will need to request the "Annotat ed Instruor
Guides" upon purchase of the text. These guides are what the teacher uses to assist in the curriculu m presati on, and provide written and performa nce tests to the studs. Phillips screwdriv er set Plumb bob Pneumatic nailer - (brad) Pneumatic nailer - (finish) Pneumatic nailer -
(frame) Portable router with bits - plunge Portable Aluminum Break Portable belt sander Portable power planer Portable router with bits - fixed Putty knife, 1-1/4" Quickgrip clamp 1 Reciprocat ing saw Router laminate trim kit Safety boots, pair Safety glasses 1S
(meeting OSHA requireme nts) Safety goggles Safety harness w/lanyard Sanding Pole Screw gun Selfcering punch Sliding T- bevel Socket wrench set, 3/8" - 1" Speed square 1 Sponge Sander Stair guage set Standard screwdriv er set Tin snips
Tool storage cabinet Torpedo level Util knife Wood chisel set, 1/4" to 1-1/2" Work bench with 4 vises and cabinet storage underneat h Work gloves (pair) 1S Wrecking bar - - is a non-expendable, tangible item. It is usually more feasible to repair it rather than replace it with an irely new unit. It has a unit cost of over $100. - is an expendable, tangible item. It is usually more feasible to replace it with an irely new unit rather than repair it. It has a unit cost of less than $100. curriculum - is additional curriculum materials. software - is computer software that is required or can enhance the instruion. training - is coursework or other professional developm for the teacher.
subscription - is for curriculum or supplemal material for a specified period of time. supplemal - is instruional resources that provide more information about or extend the cont of a subje. licensure/certification - is examinations, license and certification fees for the studs. other - is additional instruional resources. - is the number of items needed for the (C) CTE classroom/lab, for the (B) school building, for the (L) LEA, or the number needed based on the number of (S) studs in the classroom/lab. In some cases the number is based on the (W) workstations in the classroom/lab. A classroom may be divided into several kitchen workstations or hospital bed workstations. In these cases the number of items is what is needed to equip one workstation. The number of workstations is based on the anticipated number of studs taking that course at one time. Examples: 1S = one of these items for each stud in the classroom/lab 1S, = one of these items for each stud in the classroom/lab and an additional one in the classroom for the teacher 1:4S = one item for eve four studs in the classroom/lab 1B = one of these items per school building. 1L = one of these items per LEA (school distri). = two of these items per CTE classroom/lab. 3W-kitchen = three of these items per kitchen workstation in the classroom/lab. = This is required to teach the course. no = This is not required to teach the course. - This is the estimated cost of this item. - Should you conta the DPI Consultant or conta the vendor direly?