TLHG46., TLHR46., TLHY46. High Efficiency LED in Ø 3 mm Tinted Total Diffused Package DESCRIPTION 922 The TLH.46.. series was developed for applications which need a very wide radiation angle like backlighting, general indicating and lighting purposes. It is housed in a 3 mm tinted total diffused plastic package. The wide viewing angle of these devices provides a high on-off contrast. Several selection types with different luminous intensities are offe. All LEDs are categorized in luminous intensity groups. The and LEDs are categorized additionally in wavelength groups. That allows users to assemble LEDs with uniform appearance. FEATURES Choice of three bright colors Standard Ø 3 (T-) package Small mechanical tolerances Suitable for DC and high peak current Very wide viewing angle Luminous intensity categorized Yellow and color categorized Material categorization: for definitions of compliance please see www.vishay.com/doc?9992 APPLICATIONS Status lights Off/ on indicator Background illumination Readout lights Maintenance lights Legend light PRODUCT GROUP AND PACKAGE DATA Product group: LED Package: 3 mm Product series: standard Angle of half intensity: ± 6 PARTS TABLE PART COLOR LUMINOUS INTENSITY WAVELENGTH FORWARD VOLTAGE (mcd) at I F (nm) at I F (V) at I F (ma) (ma) (ma) MIN. TYP. MAX. MIN. TYP. MAX. MIN. TYP. MAX. TECHNOLOGY TLHR46 Red 4-62 - 625-2 3 2 GaAsP on GaP TLHR465 Red 2.5 6-62 - 625-2 3 2 GaAsP on GaP TLHR465-MS2Z Red 2.5 6-62 - 625-2 3 2 GaAsP on GaP TLHY46 Yellow.63 3.5-58 - 594-2.4 3 2 GaAsP on GaP TLHY46 Yellow 4-58 - 594-2.4 3 2 GaAsP on GaP TLHY465 Yellow 2.5 5-58 - 594-2.4 3 2 GaAsP on GaP TLHY465-MS2Z Yellow 2.5 5-58 - 594-2.4 3 2 GaAsP on GaP TLHG46 Green 4-562 - 575-2.4 3 2 GaP on GaP TLHG465 Green 4 6-562 - 575-2.4 3 2 GaP on GaP TLHG465-AS2Z Green 4 6-562 - 575-2.4 3 2 GaP on GaP TLHG465-MS2Z Green 4 6-562 - 575-2.4 3 2 GaP on GaP Rev. 2.2, 4-Oct-5 Document Number: 837 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9
TLHG46., TLHR46., TLHY46. ABSOLUTE MAXIMUM RATINGS (T amb = 25 C, unless otherwise specified) TLHR46., TLHY46., TLHG46. PARAMETER TEST CONDITION SYMBOL VALUE UNIT Reverse voltage V R 6 V DC forward current T amb 6 C I F 3 ma Surge forward current t p μs I FSM A Power dissipation T amb 6 C P V mw Junction temperature T j C Operating temperature range T amb -2 to + C Storage temperature range T stg -55 to + C Soldering temperature t 5 s, 2 mm from body T sd 26 C Thermal resistance junction/ambient R thja 4 K/W OPTICAL AND ELECTRICAL CHARACTERISTICS (T amb = 25 C, unless otherwise specified) TLHR46, TLHR465, RED PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT Luminous intensity () I F = ma TLHR46 I V 4 - mcd TLHR465 I V 2.5 6 - mcd Dominant wavelength I F = ma λ d 62-625 nm Peak wavelength I F = ma λ p - 635 - nm Angle of half intensity I F = ma ϕ - ± 6 - deg Forward voltage I F = 2 ma V F - 2 3 V Reverse voltage I R = μa V R 6 5 - V Junction capacitance V R = V, f = MHz C j - 5 - pf () In one packing unit I Vmin. /I Vmax..5. OPTICAL AND ELECTRICAL CHARACTERISTICS (T amb = 25 C, unless otherwise specified) TLHY46, TLHY46, THLY465, YELLOW PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT TLHY46 I V.63 3.5 - mcd Luminous intensity () I F = ma TLHY46 I V 4 - mcd TLHY465 I V 2.5 5 - mcd Dominant wavelength I F = ma λ d 58-594 nm Peak wavelength I F = ma λ p - 585 - nm Angle of half intensity I F = ma ϕ - ± 6 - deg Forward voltage I F = 2 ma V F - 2.4 3 V Reverse voltage I R = μa V R 6 5 - V Junction capacitance V R = V, f = MHz C j - 5 - pf () In one packing unit I Vmin. /I Vmax..5. OPTICAL AND ELECTRICAL CHARACTERISTICS (T amb = 25 C, unless otherwise specified) TLHG46, TLHG465, GREEN PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT Luminous intensity () I F = ma TLHG46 I V 4 - mcd TLHG465 I V 4 6 - mcd Dominant wavelength I F = ma λ d 562-575 nm Peak wavelength I F = ma λ p - 565 - nm Angle of half intensity I F = ma ϕ - ± 6 - deg Forward voltage I F = 2 ma V F - 2.4 3 V Reverse voltage I R = μa V R 6 5 - V Junction capacitance V R = V, f = MHz C j - 5 - pf () In one packing unit I Vmin. /I Vmax..5. Rev. 2.2, 4-Oct-5 2 Document Number: 837 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9
TLHG46., TLHR46., TLHY46. LUMINOUS INTENSITY CLASSIFICATION GROUP LIGHT INTENSITY (mcd) STANDARD MIN. MAX. K.63.25 L 2 M.6 3.2 N 2.5 5 P 4 8 Q 6.3 2.5 R 2 S 6 32 T 25 5 U 4 8 Luminous intensity is tested at a current pulse duration of 25 ms and an accuracy of ± %. These type numbers represent the order groups which include only a few brightness groups. Only one group will be shipped on each bag (there will be no mixing of two groups on each bag). In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measu and binned, single wavelength groups will be shipped on any one bag. In order to ensure availability, single wavelength groups will not be orderable. COLOR CLASSIFICATION DOM. WAVELENGTH (nm) GROUP YELLOW GREEN MIN. MAX. MIN. MAX. 58 584 - - 2 583 586 - - 3 585 588 562 565 4 587 59 564 567 5 589 592 566 569 6 59 594 568 57 7 - - 57 573 8 - - 572 575 Wavelengths are tested at a current pulse duration of 25 ms. TYPICAL CHARACTERISTICS (T amb = 25 C, unless otherwise specified) 6 I F - Forward Current (ma) 5 4 3 2 t p /T=..5.2 T amb 65 C.2.5. 2 4 6 8.. 95 95 T amb - Ambient Temperature ( C) 95 47 t p - Pulse Length (ms) Fig. - Forward Current vs. Ambient Temperature Fig. 2 - Forward Current vs. Pulse Length Rev. 2.2, 4-Oct-5 3 Document Number: 837 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9
TLHG46., TLHR46., TLHY46. I vrel - Relative Luminous Intensity..9.8.7 95 43.6.4.2 2 3 4 5 6 7 8 ϕ - Angular Displacement 95 32 2.4 2..6.2.8.4 2 5 2 5.5.2..5.2 I F (ma) t p /T Fig. 3 - Relative Luminous Intensity vs. Angular Displacement Fig. 6 - Relative Luminous Intensity vs. Forward Current/Duty Cycle t p /T =. t p = µs. 2 4 6 8 95 26 V F - Forward Voltage (V).. 95 29 Fig. 4 - Forward Current vs. Forward Voltage Fig. 7 - Relative Luminous Intensity vs. Forward Current.6.2.8.4 95 27 I F = ma 2 4 6 8 T amb - Ambient Temperature ( C).2..8.6.4.2 59 6 63 65 67 95 4 λ - Wavelength (nm) 69 Fig. 5 - Relative Luminous Intensity vs. Ambient Temperature Fig. 8 - Relative Intensity vs. Wavelength Rev. 2.2, 4-Oct-5 4 Document Number: 837 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9
TLHG46., TLHR46., TLHY46.. 2 95 3 V F - Forward Voltage (V) 4 6 t p /T =. t p = µs 8.. 95 33 Fig. 9 - Forward Current vs. Forward Voltage Fig. 2 - Relative Luminous Intensity vs. Forward Current.6.2.8.4 95 3 I F = ma 2 4 6 8 T amb - Ambient Temperature ( C) I rel - Relative Intensity.2..8.6.4.2 55 57 59 6 63 95 39 λ - Wavelength (nm) 65 Fig. - Relative Luminous Intensity vs. Ambient Temperature Fig. 3 - Relative Intensity vs. Wavelength I spec - Specific Luminous Intensity 2.4 2..6.2.8.4 2 5 2 5 95 26.5.2..5.2 Fig. - Relative Luminous Intensity vs. Forward Current/Duty Cycle I F (ma) t p /T. 2 4 Fig. 4 - Forward Current vs. Forward Voltage 6 t p /T =. t p = µs 95 34 V F - Forward Voltage (V) 8 Rev. 2.2, 4-Oct-5 5 Document Number: 837 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9
TLHG46., TLHR46., TLHY46..6.2.8.4 95 35 I F = ma 2 4 6 8 T amb - Ambient Temperature ( C). 95 37 Fig. 5 - Relative Luminous Intensity vs. Ambient Temperature Fig. 7 - Relative Luminous Intensity vs. Forward Current I vrel - Specific Luminous Intensity 2.4 2..6.2.8.4 I rel - Relative Intensity.2..8.6.4.2 6486 2 5 2 5 I F /ma.5.2..5.2 t p /T 52 54 56 58 6 95 38 λ - Wavelength (nm) 62 Fig. 6 - Relative Luminous Intensity vs. Forward Current/Duty Cycle Fig. 8 - Relative Intensity vs. Wavelength Rev. 2.2, 4-Oct-5 6 Document Number: 837 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9
TLHG46., TLHR46., TLHY46. PACKAGE DIMENSIONS in millimeters A C Ø 3.2 ±.5 R.4 (sphere) 34.4 ±.5 <.6 5.8 ±.3 4.4 ±.3 3.4 ±.5 (2.5) AREA NOT PLANE Ø 2.9 ±.5.5 +.2 -. 2.54 nom..5 ±.5.4 +.5 -.5 technical drawings according to DIN specifications Drawing-No.: 6.544-5255.-4 Issue: 9; 28.7.4 AMMOPACK Tape feed Label C A B 94 8667- Fig. 9 - Tape Direction The new nomenclature for ammopack is e.g. ASZ only, without suffix for the LED orientation. The carton box has to be turned to the desi position: + for anode first, or - for cathode first. AS2Z and AS2Z are still valid for already existing types, BUT NOT FOR NEW DESIGN. Rev. 2.2, 4-Oct-5 7 Document Number: 837 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9
TLHG46., TLHR46., TLHY46. TAPE DIMENSIONS in millimeters ± 2.7 ± ± 2.3 ±.2 8 - +.5 H 2 ±.3 9 ±.5 Ø 4 ±.2 2.54 +.6 -. 5.8 ±.7 6.35 ±.7 Angle φ = α/ 2.9 max. 2.7 ±.2 Measure limit over 2 index-holes: ± Quantity per: 95389 Reel (Mat. - No. 764) 2 94 87 Option Dim. H ±.5 mm AS 7.3 MS 25.5 Rev. 2.2, 4-Oct-5 8 Document Number: 837 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9
Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2/65/EU of The European Parliament and of the Council of June 8, 2 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 22/95/EC. We confirm that all the products identified as being compliant to Directive 22/95/EC conform to Directive 2/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS79A standards. Please note that some Vishay documentation may still make reference to the IEC 6249-2-2 definition. We confirm that all the products identified as being compliant to IEC 6249-2-2 conform to JEDEC JS79A standards. Revision: 2-Oct-2 Document Number: 9