TLHE5., TLHG5., TLHK5. High Intensity LED, Ø 5 mm Untinted Non-Diffused Package DESCRIPTION 9223 The TLH.5.. series is a clear, non diffused 5 mm LED for outdoor application. These clear lamps utilize the highly developed technologies like AlInGaP and GaP. The lens and the viewing angle is optimized to achieve best performance of light output and visibility. FEATURES Untinted non-diffused lens Choice of three colors TLH.5 for cost effective design Medium viewing angle Material categorization: for definitions of compliance please see www.vishay.com/doc?9992 APPLICATIONS Outdoor LED panels Central high mounted stop lights (CHMSL) for motor vehicles Instrumentation and front panel indicators Light guide design Traffic signals PRODUCT GROUP AND PACKAGE DATA Product group: LED Package: 5 mm Product series: standard Angle of half intensity: ± 9 PARTS TABLE PART COLOR LUMINOUS INTENSITY WAVELENGTH FORWARD VOLTAGE (mcd) at I F (nm) at I F (V) at I F (ma) (ma) (ma) MIN. TYP. MAX. MIN. TYP. MAX. MIN. TYP. MAX. TECHNOLOGY TLHK5 Red 32 4-2 626 63 639-2 2.6 2 AlInGaP on GaAs TLHK5-AS2Z Red 32 4-2 626 63 639-2 2.6 2 AlInGaP on GaAs TLHE5 Yellow 75 8-2 58 588 594-2 2.6 2 AlInGaP on GaAs TLHG5 Green 24 45-2 562-575 - 2.4 3 2 GaP on GaP ABSOLUTE MAXIMUM RATINGS (T amb = 25 C, unless otherwise specified) TLHK5., TLHE5., TLHG5. PARAMETER TEST CONDITION SYMBOL VALUE UNIT Reverse voltage V R 6 V DC forward current T amb 65 C I F 3 ma Surge forward current t p μs I FSM A Power dissipation T amb 65 C P V mw Junction temperature T j C Operating temperature range T amb -4 to + C Storage temperature range T stg -55 to + C Soldering temperature t 5 s, 2 mm from body T sd 26 C Thermal resistance junction/ambient R thja 35 K/W Rev. 2.5, 6-Mar-5 Document Number: 83 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9
TLHE5., TLHG5., TLHK5. OPTICAL AND ELECTRICAL CHARACTERISTICS (T amb = 25 C, unless otherwise specified) TLHK5., RED PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT Luminous intensity () I F = 2 ma I V 32 4 - mcd Dominant wavelength I F = ma λ d 626 63 639 nm Peak wavelength I F = ma λ p - 643 - nm Angle of half intensity I F = ma ϕ - ± 9 - deg Forward voltage I F = 2 ma V F - 2 2.6 V Reverse voltage I R = μa V R 5 - - V Junction capacitance V R = V, f = MHz C j - 5 - pf () In one packing unit I Vmin. /I Vmax..5 OPTICAL AND ELECTRICAL CHARACTERISTICS (T amb = 25 C, unless otherwise specified) TLHE5., YELLOW PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT Luminous intensity () I F = 2 ma I V 75 8 - mcd Dominant wavelength I F = ma λ d 58 588 594 nm Peak wavelength I F = ma λ p - 59 - nm Angle of half intensity I F = ma ϕ - ± 9 - deg Forward voltage I F = 2 ma V F - 2 2.6 V Reverse voltage I R = μa V R 5 - - V Junction capacitance V R = V, f = MHz C j - 5 - pf () In one packing unit I Vmin. /I Vmax..5 OPTICAL AND ELECTRICAL CHARACTERISTICS (T amb = 25 C, unless otherwise specified) TLHG5., GREEN PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT Luminous intensity () I F = 2 ma I V 24 45 - mcd Dominant wavelength I F = ma λ d 562-575 nm Peak wavelength I F = ma λ p - 565 - nm Angle of half intensity I F = ma ϕ - ± 9 - deg Forward voltage I F = 2 ma V F - 2.4 3 V Reverse voltage I R = μa V R 6 5 - V Junction capacitance V R = V, f = MHz C j - 5 - pf () In one packing unit I Vmin. /I Vmax..5 Rev. 2.5, 6-Mar-5 2 Document Number: 83 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9
TLHE5., TLHG5., TLHK5. LUMINOUS INTENSITY CLASSIFICATION GROUP LIGHT INTENSITY (mcd) STANDARD MIN. MAX. Z 24 48 AA 32 64 BB 43 86 CC 575 5 DD 75 5 EE 2 FF 35 27 GG 8 36 HH 24 48 II 32 64 KK 43 86 Luminous intensity is tested at a current pulse duration of 25 ms. The above type numbers represent the order groups which include only a few brightness groups. Only one group will be shipped on each bag (there will be no mixing of two groups on each bag). In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped in any one bag. In order to ensure availability, single wavelength groups will not be orderable. COLOR CLASSIFICATION DOM. WAVELENGTH (nm) GROUP YELLOW GREEN MIN. MAX. MIN. MAX. 58 584 2 583 586 3 585 588 562 565 4 587 59 564 567 5 589 592 566 569 6 59 594 568 57 7 57 573 8 572 575 Wavelengths are tested at a current pulse duration of 25 ms. TYPICAL CHARACTERISTICS (T amb = 25 C, unless otherwise specified) 6 5 4 3 2 t p /T =..5 T amb 85 C.2.5. 2 4 6 8 95 46 T amb - Ambient Temperature ( C).. 95 25 t p - Pulse Length (ms) Fig. - Forward Current vs. Ambient Temperature Fig. 2 - Forward Current vs. Pulse Length Rev. 2.5, 6-Mar-5 3 Document Number: 83 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9
TLHE5., TLHG5., TLHK5. S rel - Relative Sensitivity..9.7 94 835 2 3 4 5 6 7 8 ϕ - Angular Displacement. red. 75 Fig. 3 - Relative Radiant Sensitivity vs. Angular Displacement Fig. 6 - Relative Luminous Intensity vs. Forward Current red..5 2. 2.5 3. 759 V F - Forward Voltage (V) Fig. 4 - Forward Current vs. Forward Voltage I rel - Relative Intensity.2. red..9.7.5.3.. 6 62 64 66 68 7 752 - Wavelength (nm) Fig. 7 - Relative Intensity vs. Wavelength I V rel - Relative Luminous Intensity 2..8 red.6.4.2. I F = 2 ma. 2 3 4 5 6 7 8 9 75 T amb - Ambient Temperature ( C) Fig. 5 - Relative Luminous Intensity vs. Ambient Temperature yellow.5 2 2.5 3 95 878y V F - Forward Voltage (V) Fig. 8 - Forward Current vs. Forward Voltage Rev. 2.5, 6-Mar-5 4 Document Number: 83 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9
TLHE5., TLHG5., TLHK5. 758.6 yellow.4.2. I F = 2 ma. 2 3 4 5 6 7 8 9 T amb - Ambient Temperature ( C) Fig. 9 - Relative Luminous Intensity vs. Ambient Temperature. green 2 4 Fig. 2 - Forward Current vs. Forward Voltage 6 t p /T =. t p = µs 95 34 V F - Forward Voltage (V) 8 yellow.. 75 Fig. - Relative Luminous Intensity vs. Forward Current.6.2 95 35 green I F = ma 2 4 6 8 T amb - Ambient Temperature ( C) Fig. 3 - Relative Luminous Intensity vs. Ambient Temperature I rel - Relative Intensity 95 88y.2 yellow.. 55 57 59 6 63 65 λ - Wavelength (nm).. 83_4 Fig. - Relative Intensity vs. Wavelength Fig. 4 - Relative Luminous Intensity vs. Forward Current Rev. 2.5, 6-Mar-5 5 Document Number: 83 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9
TLHE5., TLHG5., TLHK5..2. green I rel - Relative Intensity 52 54 56 58 6 95 38 λ - Wavelength (nm) 62 Fig. 5 - Relative Intensity vs. Wavelength PACKAGE DIMENSIONS in millimeters A C R 2.49 (sphere) min. 2.9 ±.3 8.7 ±.3 35.9 ±.55 7.7 ±.5 (5.) <.7 Ø 5.8 ±.5. ± 5 Area not plane Ø 5 ±.5.5 +.5 -.5.5 +.5 -.5 technical drawings according to DIN specifications Drawing-No.: 6.544-5258.4-4 Issue: 9; 23.7. 96 22 2.54 nom. Rev. 2.5, 6-Mar-5 6 Document Number: 83 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9
TLHE5., TLHG5., TLHK5. AMMOPACK Tape feed direction Diodes: cathode before anode Transistors: collector before emitter Label Tape feed direction Diodes: anode before cathode Transistors: emitter before collector 94 8667-2 Fig. 6 - Tape Direction The new nomenclature for ammopack is e.g. ASZ only, without suffix for the LED orientation. The carton box has to be turned to the desired position: + for anode first, or - for cathode first. AS2Z and AS2Z are still valid for already existing types, BUT NOT FOR NEW DESIGN. TAPE DIMENSIONS in millimeters ± 2.7 ± ± 2 8 - +.5 2 ±.3 9 ±.5.3 ± Quantity per: 94 872 Ø 4 ± 2.54 + -. 5.8 ±.7 2.7 ± 6.35 ±.7 Measure limit over 2 index-holes: ± Reel (Mat.-no. 764).9 max. OPTION DIMENSION H ±.5 mm DIMENSION X ±.5 mm AS 7.3 - Rev. 2.5, 6-Mar-5 7 Document Number: 83 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9
Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Revision: 3-Jun-6 Document Number: 9