Floor Finishing Accessories Adaptors Reducers Transitions Corner Guards Wall Protectors Edge Guards Mouldings Leveler System
3 To have an integrated system you have to have all the pieces of the puzzle. You must be able to complete the entire space. Meet Johnsonite Finishing Accessories. They hold everything together, leaving nothing to chance. Every detail considered, every element coordinated, they re the final components that let you finish off space design functionally, without compromising aesthetics. Created for a myriad of everyday needs, Johnsonite Finishing Accessories are also designed to meet, or exceed, the recommendations of the Americans with Disabilities Act (ADA). Special engineering means they can help minimize the potential for slip and fall accidents, avoiding the costly drain on resources that often follows. Accessories help demonstrate Johnsonite innovation at its best. For instance, Wheeled Transitional Mouldings that create a gradual transition between floors of varying heights, helping both wheeled and ambulatory traffic move about more easily and safely. And every other accessory needed to complete your space without compromising. TRACK BASE CDB--A Rigid Vinyl MT--A Aluminum MT--B Aluminum MTC--A Aluminum Pinless for glue-down installation. Neutral color only. Pinless for glue-down installation. Pin type for stretch-in installation. Pinless for glue-down installation. Minimum contour radius 6'. MTC--B Aluminum Pin type for stretch-in installation. Minimum contour radius 6'.
4 5 EXPANSION JOINT SEALS T MOULDINGS EJS-XX EJS-XX-B 1-1/2" wide expansion joint strip for resilient 3" wide expansion joint strip for resilient CE-XX-A CE-XX-C CD-XX 1/2 " or " to " " leg. 1/2" to " or " 1/2" leg. " or " to " or " " leg. U.S. Patent No. 5,888,17 CD-XX-A 1/2 1/2 1/2" to 1/2" 1/2" leg. CD-XX-B 1/2 1/2" to " 1/2" leg. CD-XX-C " or " to " or " " leg. CD-XX-W " or " to " or " " leg.
6 7 ADAPTORS REDUCERS CTA-XX-A " to " CRS-XX-A " material to floor. CTA-XX-C " to " CRS-XX-B " material to floor. CTA-XX-D 1/16 " to 1/16" or " CRS-XX-C 5' roll 3/16" material to floor. 3/16 CCA-XX " to " CRS-XX-D 1/2" material to floor. 1/2 CWA-XX 1/2" to " SSR-XX-B 35' roll 1/16 1/16" or " material 1/2 RRS-XX-A 3' pieces 1/16" material 1/16 RRS-XX-B 3' pieces.8" material.8 RRS-XX-C 3' pieces " material RRS-XX-D 25' roll " material
8 9 SLIM LINE TRANSITIONS WHEELED TRAFFIC TRANSITIONS SLT-XX-A SLT-XX-B " to ".8" to " CTA-XX-H CTA-XX-HL " to " " to " SLT-XX-C.8.8".8" to " CTA-XX-HT.8 " to.8" or 2 mm.8 CTA-XX-J " material CTA-XX-JL " material CTA-XX-K " to " CTA-XX-L " to " CTA-XX-M " to " CTA-XX-N " to "
1 11 WHEELED TRAFFIC TRANSITIONS CTA-XX-P CTA-XX-PL " material " material FLEXIBLE VINYL CORNER GUARDS Johnsonite s corner guards will not only complement the interior space, but also work to protect your finished design. Will not shrink, crack or chip Three return sizes: 2-", 1-1/2" and 3/4" Available in 32 ColorMatch colors and 5 additional colors CTA-XX-Q 1/2" material FLEXIBLE VINYL CORNER GUARDS CTA-XX-X 1/2.8.8" to " VBG-XX-B-48 VBG-XX-B-96 4' or 8' pieces Corner guard. 3/4" returns. " thick. Tapered ends. CTA-XX-Y CTA-XX-Z.8.8.8.8" to.8".8" to " U.S. Patent No. 5,581,967 VBG-XX-A-48 VBG-XX-A-96 4' or 8' pieces VBG-XX-48 VBG-XX-96 4' or 8' pieces Corner guard. 1-1/2" returns. " thick. Tapered ends. Corner guard. 2-" returns. " thick. Tapered ends. For available colors reference color palette A on last page. +14 Tropical Storm, 15 Cabernet, 129 Silk and 132 Espresso. VBG-XX-C 8' pieces Millwork profile corner guard. " thick. A Also available in 68 White Sand and 79 Bone White. Available in Selects Color Palette. See Johnsonite Story or Color Guide for details.
12 13 FLEXIBLE VINYL CORNER GUARDS CLEAR LEXAN CORNER GUARDS AND WALL PROTECTORS TRANSITIONS FOR LAMINATE FLOORING CD-XX-B1 Flexible transition for laminate flooring to same height CLEAR LEXAN CORNER GUARDS AND WALL PROTECTORS DPT-XX-A Flexible transition for laminate to laminate flooring or laminate to same height Clear Lexan Corner Guards and Wall Protectors allow the wall surface to show through while protecting wall coverings and finishes. DPT-XX-B Flexible transition for laminate to carpet or resilient CLEAR LEXAN CORNER GUARDS AND WALL PROTECTORS *Available in 3/4" and 1-" returns. *Available in 1-", 1-1/2", 2" and 2-1/2" returns. *Available in 3" and 4" widths. 4' and 8' lengths. Available in selfstick or with self-tapping nail screws. 4' and 8' lengths. Pre-drilled mounting holes and chrome screws. Wall protector. 8' lengths. Fasten with screws provided. DPT-XX-C DPT-XX-D DPT-XX-FR 4' pieces 5/8 Flexible track base for DPT-XX-A and DPT-XX-B profiles. Flexible edge to finish exposed laminate surfaces. Flexible reducer for transitioning from 5/8" laminate Available in clear material only.
14 15 LAMINATE TRANSITION COLORS COVE CAPS SCC-XX-A For " 169 Tamarind 17 Brownie 171 Golden 172 Acorn SCC-XX-B For " 173 Auburn 174 Ginger 175 Caramel Transitions for laminate flooring are available in the 7 colors shown above plus additional colors shown below, which can be found on the color palette on the last page. 29 Moon Rock 34 Almond 45 Sandalwood 49 Beige 8 Fawn 129 Silk 13 Sisal 132 Espresso 167 Fudge CCC-XX-A CCC-XX-B 9/32 For " or " 9/32" inside dimension. COVE FILLER STRIPS CCC-XX-C For " CFS- 1-3/4" radius. Neutral only. CCC-XX-D For 3/16" 3/16 CFS--A 1-" radius. Neutral only. RCC-XX 25' roll For " or " CFS--M 5' pieces 1" radius. Neutral only. SCC-XX-D with selfstick tape For.8.8
16 17 THRESHOLDS U.S. Patent No. 6,553,616 VT-XX-M2 3' pieces VT-XX-M6 3' pieces 5-1/2" carpet threshold. For stretchin and glue-down carpet and ceramic. 1-3/4" carpet threshold. For stretch-in and glue-down carpet and ceramic. FEATURE STRIPS FS-XX-DW1 5' roll " " " wide feature strip for " MATTE FS-XX-DW2 5' roll " 1/2" 1/2" wide feature strip for " CT-4 Black CT-218 Bluebell CT-217 Evergreen CT-213 Slate FS-XX-DW3 5' roll " 1" 1" wide feature strip for " SPECKSTONE CONTOUR EDGES CT-216 Bluestone METALLIC CT-214 Greystone CT-219 Drystone CT-215 Tundra CT-XX 8.1' pieces " to " material for curved installations up to 2" radius. CT-25 Burnt Almond CT-27 Doubloon CT-29 Tin CT-21 Silver CT-212 Zinc
18 19 SAFETY STRIDE TRANSITIONS SST-XX-A.171 Safety Stride to floor. Tapered reducer. EDGE GUARDS SST-XX-B Safety Stride to " EG-XX-G EG-XX-H " material " material SST-XX-C.171.171 Safety Stride to " or " EG-XX-J 3/16" material TUB MOULDINGS EG-XX-K EG-XX-L 3/16 3/16 3/16" material " material TM-5* 5' pieces (Self-Stick) Luster finish cove for bathtub, counter and shelves. 1-1/2" height. White only. EG-XX-M EG-XX-W " or " carpet over tackless " material TM-5-A* 5' pieces (Self-Stick) * Available in 5 White only. Luster finish cove for bathtub, counter and shelves. 1" height. White only.
TRANSITION SELECTOR CHART BY DIMENSION 21 DIMENSIONS BY COLOR 1. Identify thickness of materials to be transitioned. 2. Find the corresponding color to match the thicknesses. 3. Find your colors together in any profile below. 1/16 = 1/16" = ".8 =.8" = " 3/16 = 3/16".171 =.171" = " = " 9/32 = 9/32" 5/8 = 5/8" = " 1/2 = 1/2" Example: " material to " Can t find a transition to meet your needs? Call your Johnsonite representative and ask about getting a custom transition made for you. Gauge Subfloor 1/16".8" ".171" 3/16" " " " 1/2" 5/8" Subfloor SSR-XX-B RRS-XX-B SSR-XX-B SST-XX-A CRS-XX-C CRS-XX-A EG-XX-G CRS-XX-B CRS-XX-D DPT-XX-FR RRS-XX-A RRS-XX-C EG-XX-J EG-XX-H EG-XX-L EG-XX-W CTA-XX-Q RRS-XX-D EG-XX-K EG-XX-M CTA-XX-P EG-XX-M CTA-XX-PL CTA-XX-J CTA-XX-JL 1/16" SSR-XX-B CTA-XX-D RRS-XX-A.8" RRS-XX-B CTA-XX-Y SLT-XX-B CTA-XX-HT CTA-XX-Z RRS-XX-B SLT-XX-C CTA-XX-X " SSR-XX-B SLT-XX-B CTA-XX-N SST-XX-B SLT-XX-A CTA-XX-D CTA-XX-K CD-XX-B RRS-XX-C RRS-XX-B FS-XX-DW1 CTA-XX-H CE-XX-A RRS-XX-D CTA-XX-X FS-XX-DW2 CTA-XX-HL FS-XX-DW3 CTA-XX-A CTA-XX-C CE-XX-A.171" SST-XX-A SST-XX-B SST-XX-C SST-XX-C 3/16" CRS-XX-C EG-XX-J " CRS-XX-A SLT-XX-C SLT-XX-A SST-XX-C CTA-XX-M CD-XX CTA-XX-L CE-XX-C EG-XX-H CTA-XX-HT CTA-XX-H CD-XX CD-XX-C CT-XX EG-XX-K CTA-XX-HL CD-XX-C CD-XX-W EG-XX-M CTA-XX-A CD-XX-W CTA-XX-J CTA-XX-C CTA-XX-JL CE-XX-A " EG-XX-G CTA-XX-D CTA-XX-D SST-XX-C CD-XX CD-XX CCA-XX CWA-XX EG-XX-L CE-XX-A CD-XX-C CD-XX-C EG-XX-M CD-XX-W CD-XX-W " CRS-XX-B CTA-XX-Z CTA-XX-K CTA-XX-L CCA-XX CE-XX-C EG-XX-W CT-XX CTA-XX-P CTA-XX-PL 1/2" CRS-XX-D CD-XX-B CE-XX-C CWA-XX CE-XX-C CD-XX-A CTA-XX-Q 5/8" DPT-XX-FR
color palette A For actual color representation please refer to the Johnsonite Color Guide or Johnsonite Story. ColorMatch is a designer palette of 32 leading colors that match Johnsonite s Rubber and Vinyl Specialty Flooring Products and Finishing Accessories. 1 Snow White W 34 Almond W 22 Pearl CB 24 Grey Haze WG 48 Grey WG 2 Charcoal WG 18 Navy Blue 41 Sea Breeze 31 Zephyr CB 49 Beige WB 9 Clay WB 42 Sable WB 59 Heather Green 86 Hunter Green 58 Windsor Blue 92 Blue Lagoon 45 Sandalwood WB 13 Sisal 33 Adobe Peach 76 Cinnamon 85 Burgundy 63 Burnt Umber B 47 Brown 4 Black B ADDITIONAL COLORS 8 Fawn CB 32 Pebble WG 55 Silver Grey WG 21 Platinum CG 14 Tropical Storm 15 Cabernet 129 Silk WB 132 Espresso = Indicates colors that are part of the Selects Color Palette 38 Pewter CG 28 Medium Grey CG 71 Storm Cloud CG 29 Moon Rock WG 22 For your convenience, we ve identified Color Foundations neutrals in the following way: WB (warm beige) WG (warm grey) B (black) CB (cool beige) CG (cool grey) W (white)
USA: (8) 899-8916 Fax (44) 543-892 Canada: (8) 661-2162 Fax (519) 747-9155 www.johnsonite.com 27 Johnsonite, Inc. A Tarkett Company. Printed in the U.S.A. 951-656 5/7