Table of Contents History... 3 Cold Chisels... 4 Punches... 7 Masonry... 14 Floor/Electrician/Wood... 21 Nail Sets... 23 TargetGuard Tools... 24 Bars... 25 Hammer, Sledge & Replacement Handles... 29 Angle Finders... 30 Miscellaneous... 31 Kits... 33 Assortments... 36 Contact Information... 37 2
Our Story DASCO PRO, Inc. has been in the forged hand tool industry since 1922. Our company has been a leader of innovation, new packaging and superior technology. In 1984, DASCO merged with angle finder manufacturer Pro Products and formed DASCO PRO, Inc. Today DASCO PRO, Inc. offers the highest quality line of striking tools, a complete line of angle finders, fiberglass replacement handles, and boundary marker/reflectors. Our production facilities include three manufacturing plants in Rockford, IL. totaling 216,000 square feet. The upset head on the largest striking tools was developed and trademarked as Targethead tools in 1948. This feature gives a large surface to strike and allows protection to the hand holding the tool. The DASCO PRO TargetGuard tool holder is featured on all of our best selling Targethead struck tools. The TargetGuard offers a 3 ¾ circle of protection against glancing blows and missed hits. Our TargetGuard is made of a special blend of durable molded plastic that is permanently force-fit around the shaft of select striking tools and is a DASCO PRO exclusive. It features a full 360-degree handhold for a firm, comfortable grip. We pad print our tools with epoxy ink that is easily legible to the customer, giving size, tool name, model number, warnings and Made in USA information. All products have an individual UPC code. Our company is EDI integrated. DASCO PRO is a member of the American Hardware Manufacturers Association. 3
Cold Chisels DASCO PRO cold chisels are precision ground for cutting, shaping and removing metal that is softer than the cutting edge of the chisel. Made of high carbon steel that has been heat treated, these chisels are to be used on cast iron, wrought iron, steel, bronze and copper. COLD CHISELS 400-0 1/4 COLD CHISEL 4-7/8 040006 3 401-0 5/16 COLD CHISEL 5-1/4 040105 3 402-0 3/8 COLD CHISEL 5-5/8 040204 3 405-0 1/2 COLD CHISEL 6-3/8 040501 3 406-0 5/8 COLD CHISEL 6-3/4 040600 3 408-0 3/4 COLD CHISEL 7-1/8 040808 3 413-0 7/8 COLD CHISEL 7-1/2 041300 3 417-0 1 COLD CHISEL 7-7/8 041706 3 400 1/4 COLD CHISEL 4-7/8 004008 3 401 5/16 COLD CHISEL 5-1/4 004015 3 402 3/8 COLD CHISEL 5-5/8 004022 3 405 1/2 COLD CHISEL 6-3/8 004053 3 406 5/8 COLD CHISEL 6-3/4 004060 3 408 3/4 COLD CHISEL 7-1/8 004084 3 413 7/8 COLD CHISEL 7-1/2 004138 3 417 1 COLD CHISEL 7-7/8 004176 3 4
Long Cold Chisels DASCO PRO long cold chisels are precision ground for cutting, shaping and removing metal that is softer than the cutting edge of the chisel. Made of high carbon steel that has been heat treated, these chisels are to be used on cast iron, wrought iron, steel, bronze and copper. 441-0 1/2 LONG COLD CHISEL 12 044103 3 410-0 3/4 LONG COLD CHISEL 12 041003 3 415-0 7/8 LONG COLD CHISEL 12 041508 3 419-0 1 LONG COLD CHISEL 12 041904 3 337-0 1-1/4 X 12 FLAT UTILITY CHISEL 12 033701 3.... 441 1/2 LONG COLD CHISEL 12 004411 3 407 5/8 LONG COLD CHISEL 12 004077 3 410 3/4 LONG COLD CHISEL 12 004107 3 411 3/4 X 18 LONG COLD CHISEL 12 004114 3 415 7/8 LONG COLD CHISEL 12 004152 3 419 1 X 12 LONG COLD CHISEL 12 004190 3 420 1 X 18 LONG COLD CHISEL 12 004206 3 337 1-1/4 FLAT UTILITY CHISEL 12 000352 3 COLD CHISELS Cold Chisel Kits DASCO PRO cold chisels are precision ground for cutting, shaping and removing metal that is softer than the cutting edge of the chisel. Made of high carbon steel that has been heat treated, these chisels are to be used on cast iron, wrought iron, steel, bronze and copper. Item # Description Pieces UPC Pack 29 4 PIECE KIT 4 502368 3.. 44 3 PIECE KIT 3 000635 3 5
Cold Chisels With TargetGuard The DASCO PRO Cold Chisel with TargetGuard is designed for shearing nuts, bolts, rivets and other materials. Its large target head striking area reduces mushrooming and protects hands from missed hits. COLD CHISELS 018371- G410 3/4 LONG COLD CHISEL W/TG 12 001038 3 G417 1 COLD CHISEL W/TG 7-7/8 001069 3 G419 1 LONG COLD CHISEL W/TG 12 001076 3 G337 1-1/4 FLAT UTILITY CHISEL W/TG 12 001014 3 6
Center Punches DASCO PRO Center punches have a precision ground point for making accurate hole starting easier. Made of high carbon steel that has been heat treated. Use on metals softer than their point. PUNCHES 530-0 1/4 CENTER PUNCH 4 053006 3 531-0 5/16 CENTER PUNCH 4-1/2 053105 3 532-0 7/16 CENTER PUNCH 5 053204 3 534-0 1/2 CENTER PUNCH 5-1/2 053402 3.... 528 3/16 CENTER PUNCH 4 503051 3.. 529 5/32 CENTER PUNCH 4 503068 3 530 1/4 CENTER PUNCH 4 005302 3 531 5/16 CENTER PUNCH 4-1/2 005319 3 532 7/16 CENTER PUNCH 5 005326 3 534 1/2 CENTER PUNCH 5-1/2 005340 3 7
Prick Punches DASCO PRO Prick punches are used to mark and scribe work pieces. Made of high carbon steel that has been heat treated. Use on metals softer than their points. PUNCHES 539-0 1/4 PRICK PUNCH 4 053907 3 540-0 5/16 PRICK PUNCH 4-1/2 054003 3 541-0 3/8 PRICK PUNCH 5 054102 3.... 539 1/4 PRICK PUNCH 4 005395 3 540 5/16 PRICK PUNCH 4-1/2 005401 3 541 3/8 PRICK PUNCH 5 005418 3 Starter Punches Starter punches are used to loosen frozen pins and keys. 562-0 3/32 STARTER PUNCH 5-1/2 056205 3 562 3/32 STARTER PUNCH 5-1/2 005623 3 8
Solid Punch DASCO PRO Solid Punches are made of heat treaded high carbon steel. It is a perfect tool for loosening frozen or tight pins and keys or knocking out rivets. Once loosened, follow up with a pin punch to drive the pin or key out. It can be used on any softer metal. PUNCHES 564-0 1/8 SOLID PUNCH 5 502399 3 565-0 5/32 SOLID PUNCH 5-1/2 502405 3 566-0 3/16 SOLID PUNCH 7 502412 3 568-0 7/16 SOLID PUNCH 9 502429 3 569-0 1/4 SOLID PUNCH 7 502436 3 560 1/16 SOLID PUNCH 4-1/2 503075 3 561 3/32 SOLID PUNCH 4-1/2 503082 3 563 7/32 SOLID PUNCH 3-1/4 503099 3 564 1/8 SOLID PUNCH 5 502894 3 565 5/32 SOLID PUNCH 5-1/2 502900 3 566 3/16 SOLID PUNCH 7 502917 3 568 7/16 SOLID PUNCH 9 502924 3 569 1/4 SOLID PUNCH 7 502931 3 572 5/16 SOLID PUNCH 6-1/4 503105 3 9
Pin Punch DASCO PRO Pin punches are used to remove a pin or key. Use a pin punch that is one size smaller than the pin being driven to prevent damage to the side walls containing the pin. PUNCHES 581-0 3/32 PIN PUNCH 5-1/2 058100 3 582-0 1/8 PIN PUNCH 5-1/2 058209 3 583-0 5/32 PIN PUNCH 5-1/2 058308 3 584-0 3/16 PIN PUNCH 5-1/2 058407 3 588-0 7/32 PIN PUNCH 6 000666 3 589-0 1/4 PIN PUNCH 6 058902 3 590-0 5/16 PIN PUNCH 6 059008 3 592-0 1/16 PIN PUNCH 4-1/2 059206 3.... 581 3/32 PIN PUNCH 5-1/2 005814 3 582 1/8 PIN PUNCH 5-1/2 005821 3 583 5/32 PIN PUNCH 5-1/2 005838 3 584 3/16 PIN PUNCH 5-1/2 005845 3 588 7/32 PIN PUNCH 6 005883 3 589 1/4 PIN PUNCH 6 005890 3 590 5/16 PIN PUNCH 6 005906 3 591 3/8 PIN PUNCH 8-1/2 503044 3 592 1/16 PIN PUNCH 4-1/2 005920 3 10
Long Pin Punch DASCO PRO Long Pin Punches are specifically designed for removing pins and keys in work area where extra length is needed. The punches are machined to exacting standards for years of reliable, durable service. PUNCHES 593-0 3/16 LONG PIN PUNCH 9 000680 3 594-0 1/4 LONG PIN PUNCH 9 000697 3 595-0 5/16 LONG PIN PUNCH 9 000703 3 596-0 3/8 LONG PIN PUNCH 9 000710 3 597-0 1/2 LONG PIN PUNCH 8-1/2 000727 3..... 593 3/16 LONG PIN PUNCH 9 000185 3 594 1/4 LONG PIN PUNCH 9 000192 3 595 5/16 LONG PIN PUNCH 9 000208 3 596 3/8 LONG PIN PUNCH 9 000215 3 597 1/2 LONG PIN PUNCH 8-1/2 000222 3 11
Roll Pin Punch Precision machined Roll Pin Punches are specifically designed to remove spring/roll pins. The heat treated point has a rounded nib to center the point into the pin allowing the point shoulder to maintain maximum contact with the pin during removal. The punch shaft allows for a long, straight removal of the pin without damaging the pin wall material. DASCO PRO offers a range of punch point sizes to accurately fit the pin size to be removed. All Roll Pin Punches are made of high strength steel for years of reliable, durable service. PUNCHES 253-0 1/8 ROLL PIN PUNCH 4 000536 3 255-0 3/16 ROLL PIN PUNCH 4-1/2 000550 3 258-0 5/16 ROLL PIN PUNCH 6 000581 3..... 250 1/16 ROLL PIN PUNCH 3 000383 3 252 3/32 ROLL PIN PUNCH 3-1/2 000406 3 253 1/8 ROLL PIN PUNCH 4 000413 3 254 5/32 ROLL PIN PUNCH 4-1/2 000420 3 255 3/16 ROLL PIN PUNCH 4-1/2 000437 3 256 7/32 ROLL PIN PUNCH 5 000444 3 257 1/4 ROLL PIN PUNCH 5-1/2 000451 3 258 5/16 ROLL PIN PUNCH 6 000468 3 12
Drift/Alignment Punches DASCO PRO drift punches feature a long, tapered point to aid in aligning and sizing holes in various materials. Made in USA of high carbon steel that has been heat treated to provide many years of use. PUNCHES 601-0 1/8 DRIFT PUNCH 8 060103 3 602-0 5/32 DRIFT PUNCH 10 000734 3 603-0 3/16 DRIFT PUNCH 9 060301 3 604-0 3/16 DRIFT PUNCH 11 502481 3 606-0 1/4 DRIFT PUNCH 12 060608 3.... 601 1/8 DRIFT PUNCH 8 060103 3 602 5/32 DRIFT PUNCH 10 000734 3 603 3/16 DRIFT PUNCH 9 006033 3 606 1/4 DRIFT PUNCH 10 006064 3 608 5/16 DRIFT PUNCH 12 006088 3 610 3/8 DRIFT PUNCH 10 502955 3 611 1/2 DRIFT PUNCH 10 502962 3 612 7/32 DRIFT PUNCH 10 502979 3 614 7/32 DRIFT PUNCH 12 502986 3 701 3/16 DRIFT PUNCH 16 502993 3 Long Drift/Alignment Punches 702 5/16 LONG DRIFT PUNCH 18 503013 3 705 3/8 LONG DRIFT PUNCH 21 503037 3 13
Brick Sets DASCO PRO brick sets are designed for scoring, cutting and trimming bricks and blocks. Made of high carbon steel that has been heat treated, these chisels feature a sharp, durable cutting edge for years of use. MASONRY 434-0 2-1/2 BRICK SET 7 043403 3 435-0 3 BRICK SET 7 043502 3 436-0 3-1/2 BRICK SET 7 043601 3 437-0 4 BRICK SET 7 043700 3 439-0 5 BRICK SET 7 043908 3.... 434 2-1/2 BRICK SET 7 004343 3 435 3 BRICK SET 7 004350 3 436 3-1/2 BRICK SET 7 004367 3 437 4 BRICK SET 7 004374 3 439 5 BRICK SET 7 004398 3 14
Mason Chisels DASCO PRO Mason Chisels are ideal for cutting or shaping brick, cement block, cinder block, or trimming excess mortar. MASONRY 332-0 1-1/4 MASONS CHISEL 7-1/2 033206 3 333-0 1-3/4 MASONS CHISEL 7-1/2 033305 3 334-0 2-1/4 MASONS CHISEL 7-1/2 033404 3 335-0 2-3/4 MASONS CHISEL 7-1/2 033503 3.... 332 1-1/4 MASONS CHISEL 7-1/2 003322 3 333 1-3/4 MASONS CHISEL 7-1/2 003339 3 334 2-1/4 MASONS CHISEL 7-1/2 003346 3 335 2-3/4 MASONS CHISEL 7-1/2 003353 3 15
Flat Utility Chisels The DASCO PRO Flat Utility chisel is used for cutting metal and other materials softer than the heat-treated cutting edge. MASONRY 337-0 1-1/4 FLAT UTILITY CHISEL 12 000352 3 337 1-1/4 FLAT UTILITY CHISEL 12 033701 3 Tooth Chisels DASCO PRO Tooth chisels have sharp teeth for accurately cutting and shaping soft stone. 1232-0 1-1/4 TOOTH CHISEL 7-1/2 123204 3 1233-0 1-3/4 TOOTH CHISEL 7-1/2 123303 3 1235-0 2-3/4 TOOTH CHISEL 7-1/2 123501 3.... 1232 1-1/4 TOOTH CHISEL 7-1/2 012324 3 1233 1-3/4 TOOTH CHISEL 7-1/2 012331 3 1235 2-3/4 TOOTH CHISEL 7-1/2 012355 3 16
Concrete Chisels The DASCO PRO Concrete chisel is designed to break up concrete floors, sidewalks and paving slabs when an air hammer would be impractical. MASONRY 480-0 3/4 CONCRETE CHISEL 12 048002 3.... 480 3/4 CONCRETE CHISEL 12 004800 10 Plugging Chisel DASCO PRO Plugging chisels are specially designed with tapered blade to clean mortar joints easily without binding. They also feature DASCO PRO s exclusive TargetHead design that increases the striking area and reduces spalling and mushrooming. 476 3/16 PLUGGING CHISEL 10 004763 10 17
Star Drills DASCO PRO Star drills are designed for drilling holes in masonry surfaces. Made of high carbon steel that has been heat treated. MASONRY 3621-0 1/4 STAR DRILL 12 362108 3 3635-0 1/2 STAR DRILL 12 363501 3 3643-0 5/8 STAR DRILL 12 364300 3 3651-0 3/4 STAR DRILL 12 365109 3.... 3621 1/4 STAR DRILL 12 036214 3 3635 1/2 STAR DRILL 12 036351 3 3643 5/8 STAR DRILL 12 036436 3 3651 3/4 STAR DRILL 12 036511 3 18
Masonry Chisels With TargetGuard DASCO PRO Mason Chisels are ideal for cutting or shaping brick, cement block, cinder block, or trimming excess mortar. The target head has been designed to help protect hands from missed hits and to reduce mushrooming from repeated blows. MASONRY Mason Chisel Brick Chisel Flat Utility Chisel Concrete Chisel.... 018371- G333 1-3/4 MASONS CHISEL W/TG 7-1/2 000987 3 G334 2-1/4 MASONS CHISEL W/TG 7-1/2 000994 3 G335 2-3/4 MASONS CHISEL W/TG 7-1/2 001007 3 G435 3 BRICK SET W/TG 7 001090 3 G436 3-1/2 BRICK SET W/TG 7 001106 3 G437 4 BRICK SET W/TG 7 001113 3 G337 1-1/4 FLAT UTILITY CHISEL W/TG 12 001014 3 G480 3/4 CONCRETE CHISEL W/TG 12 001182 3 19
Brick Hammers DASCO PRO Brick Hammers are used for setting and cutting bricks, masonry tile, concrete blocks, plus chipping mortar from materials. Made with a long, thin tapered blade that can be kept sharp by filing or by using a hand stone. MASONRY 777 12 OZ BRICK HAMMER 12 OZ. 007771 10 877 24 OZ BRICK HAMMER 24 OZ. 008778 10 Tapered Jointers DASCO PRO Tapered Jointers are simple but useful tools to make smooth horizontal and vertical mortar joints with either a V or round pattern. 933 RD & V TAPERED JOINTER 1/2 009331 10 935 1/2 RD TAPERED JOINTER 1/2 009355 10 1935 TAPERED JOINTER 5/8 RD 5/8 019354 10 2935 TAPERED JOINTER 3/4 RD 3/4 029353 10 20
Floor Chisels The DASCO PRO Floor chisel can be used for removing tongue and groove flooring. These chisels have a strong, thin cutting blade for rough cutting and trimming hard and soft woods. 471-0 2 FLOOR CHISEL 10 047104 3 472-0 2-1/2 FLOOR CHISEL 10 047203 3 473-0 3 FLOOR CHISEL 11 047302 3 471 2 FLOOR CHISEL 10 004718 3 472 2-1/2 FLOOR CHISEL 10 004725 3 473 3 FLOOR CHISEL 11 004732 3 Electrician Chisels FLOOR/ELECTRICIAN/WOOD The electrician s chisel is designed with a shorter handle to enable electricians to work in tight, crowded areas. These chisels have a strong, thin cutting blade for rough cutting and trimming wood and building materials. 470-0 2-3/4 ELECTRICIANS CHISEL 8 047005 3.... 470 2-3/4 ELECTRICIANS CHISEL 8 004701 3 21
Floor/Electrician Chisels with TargetGuard The DASCO PRO chisels are designed for cutting, shaping, trimming and removing building materials. The short handle on electrician chisels get into small, tight areas..... 018371- G472 2-1/2 FLOOR CHISEL W/TG 10 001151 3 G473 3 FLOOR CHISEL W/TG 11 001168 3 G470 2-3/4 ELECTRICIANS CHISEL W/TG 8 001137 3 FLOOR/ELECTRICIAN/WOOD 22
Nail Sets DASCO PRO Nail Sets are designed for countersinking finishing nails in hard or soft wood. A knurled grip ensures tip placement on non-hardened finish nails. NAIL SETS Pro Nail Set Kit Nail Set Black Oxide Nail Set Zinc Plated 796-0 1/32 PRO NAIL SET 5 502351 5 76 3 PIECE PRO NAIL SET KIT 5 502344 5 696-0 1/32 NAIL SET (BLACK OXIDE) 4 500319 5 697-0 2/32 NAIL SET (BLACK OXIDE) 4 500326 5 698-0 3/32 NAIL SET (BLACK OXIDE) 4 500333 5 77 3 PC NAIL SET KIT (BLACK OXIDE) 4 500340 5..... 696 1/32 NAIL SET (ZINC PLATED) 4 500784 5 697 2/32 NAIL SET (ZINC PLATED) 4 500791 5 698 3/32 NAIL SET (ZINC PLATED) 4 500807 5 23
TargetGuard Tools The TargetGuard offers a 3.75 in. circle of protection against glancing blows and missed hits. Made of a special blend of durable, molded material that is permanently force-fit around the shaft of the tool. Features a full 360 hand hold for a firm, comfortable grip. Mason Chisel Brick Chisel Flat Utility Chisel Concrete Chisel TARGETGUARD TOOLS Floor/Electrician Chisel Long Cold Chisel Cold Chisel.... 018371- G410 3/4 LONG COLD CHISEL W/TG 12 001038 3 G417 1 COLD CHISEL W/TG 7-7/8 001069 3 G419 1 LONG COLD CHISEL W/TG 12 001076 3 G333 2-3/4 MASONS CHISEL W/TG 7-1/2 000987 3 G334 2-1/4 MASONS CHISEL W/TG 7-1/2 000994 3 G335 2-3/4 MASONS CHISEL W/TG 7-1/2 001007 3 G435 3 BRICK SET W/TG 7 001090 3 G436 3-1/2 BRICK SET W/TG 7 001106 3 G437 4 BRICK SET W/TG 7 001113 3 G472 2-1/2 FLOOR CHISEL W/TG 10 001151 3 G473 3 FLOOR CHISEL W/TG 11 001168 3 G470 2-3/4 ELECTRICIANS CHISEL W/TG 8 001137 3 G480 3/4 CONCRETE CHISEL W/TG 12 001182 3 G337 1-1/4 FLAT UTILITY CHISEL W/TG 12 001014 3 24
Small Bars DASCO PRO small pry bars are designed for professionals and homeowners alike. Our small bars have a variety of nail slots for pulling small nails, tacks and gun nails. They have sharp edges for prying, pulling and scraping. BARS Lil Pro Bar 7-1/2 Ultra Bar II Pry Bar 222-0 5-1/2 LIL BAR 5-1/2 022200 5 227-0 7-1/2 ULTRA BAR II 7-1/2 502313 5 2231-0 9-1/2 TRIM / PRY BAR 9-1/2 501972 5 222 5-1/2 LIL BAR 5-1/2 002226 5 227 7-1/2 ULTRA BAR II 7-1/2 502443 5 2231 9-1/2 TRIM/PRY BAR - CARDED 9-1/2 502450 5 25
Pry Bars The DASCO PRO pry bars include a wide range of prying, ripping, nail pulling bars. Designed and manufactured in the USA with high carbon, heat treated American steel. BARS I-Beam Pry Bar Ripping Bar Wrecking Bar Shingle Ripper Spartacus Bar 121 18 NAIL PULLER/PRY BAR 18 501316 3 140 15 PRO BAR 15 001403 3 160 20 PRY BAR W/ROLL HEAD 20 502580 3 226 12 WRECKING BAR 12 501613 4 210 18 WRECKING BAR 18 501453 4 211 24 WRECKING BAR 24 501460 4 212 30 WRECKING BAR 30 501477 4 213 36 WRECKING BAR 36 501484 4 231 17-3/4 STRAIGHT RIPPING BAR 17-3/4 002318 3 232 17-3/4 90 DEGREE RIPPING BAR 17-3/4 002325 3 631 14 SPARTACUS BAR 14 502030 4 632 24 SPARTACUS BAR 24 502047 4 633 36 SPARTACUS BAR 36 502054 4 635 30 ULTRA BAR 30 502078 4 640 24 SHINGLE RIPPER 24 006408 3 3471 10-1/2 HEX MOLDING TOOL 10-1/2 034715 3 26
Nail Pullers DASCO PRO nail pullers feature a variety of nail pulling slots. Sharp V slots bite in the nail shank for easy nail removal. Designed and manufactured in the USA with high carbon, heat treated American steel. BARS Double End Nail Puller I-Beam Nail Puller Nail Puller Bar Nail Claw Bar 134-0 11 DOUBLE END NAIL CLAW 11 013406 3 BULK. 018371-120 12 I-BEAM NAIL PULLER BAR 12 501309 3 130 9 NAIL CLAW BAR 9 001304 3 132 12 NAIL CLAW BAR 12 001328 3 134 11 BULK DBLE END NAIL 11 001342 3 221 11-1/2 CLAW BAR W/HANDLE 11-1/2 501576 3 27
Finishing Bars The DASCO PRO Finishing bars are designed for pulling, prying and removing trim and molding. Sharp V slots pull finish nails and pneumatic gun nails with ease. BARS Molding Bar 9 Nail Puller 100-0 9 NAIL PULLER 9 502214 4 102-0 12 NAIL PULLER 12 502238 5 103-0 8 MOLDING BAR 8 502245 4 101-0 10 MOLDING PRY BAR 10 502221 4 BULK. 018371-100 9 NAIL PULLER 9 501668 5 102 12 NAIL PULLER 12 501675 5 101 10 MOLDING PRY BAR 10 501705 5 28
Hammers & Sledges Item # Description UPC Pack 018371- ED61 3 LB DRILLING HAMMER W/FIBERGLASS & VINYL HANDLE, 10 502627 4 ED7 4 LB DRILLING HAMMER W/FIBERGLASS HANDLE, 10 502634 4 ED71 4 LB DRILLING HAMMER W/FIBERGLASS & VINYL HANDLE, 10 502641 4 ED72 4 LB DRILLING HAMMER W/WOOD HANDLE, 10 502658 4 ED8 4 LB BLACKSMITH HAMMER W/FIBERGLASS HANDLE, 16 502665 4 ED9 4 LB ENGINEER HAMMER W/WOOD HANDLE, 16 502672 4 S1 8 LB SLEDGE HAMMER W/HEAVY DUTY FIBERGLASS HANDLE, 32 502689 1 S1A 8 LB SPLITTING MAUL W/FIBERGLASS HANDLE, 36 502696 1 S2 6 LB DOUBLE FACE SLEDGE W/FIBERGLASS HANDLE, 34 502702 1 S3 3 LB DOUBLE FACE SLEDGE W/FIBERGLASS HANDLE, 16 502719 4 S31 2.5 LB DOUBLE FACE SLEDGE W/FIBERGLASS & VINYL HANDLE, 14 502726 4 S4 8 LB DOUBLE FACE SLEDGE W/FIBERGLASS HANDLE, 34 502733 1 S5 10 LB DOUBLE FACE SLEDGE W/FIBERGLASS HANDLE, 34 502740 1 Replacement Handles DASCO PRO fiberglass handles give your customers the toughness and durability they want for their striking tools. We pultrude up to 175 rovings of fiberglass per handle into a smooth, strong handle - many times tougher than wood. The waterproof, non-warping and non-corrosive features of fiberglass assures customer satisfaction. Each handle replacement kit comes with instructions, 2 part epoxy resin, stick and mixing cup. 881 36 SLEDGE-SPLITTING MAUL HANDLE 36 000400 4 882 36 SINGLE BIT AXE HANDLE 36 000417 4 884 36 PICK/MATTOCK HANDLE 36 000431 4 885 36 AXE / SLEDGE / MAUL HANDLE 36 000608 4 887 15 ENGINEER/BLACKSMITH HANDLE 15 000622 4 888 36 DOUBLE BIT AXE HANDLE 36 000639 4 700 EPOXY ADHESIVE A & B GLUE 000394 EA HAMMER, SLEDGE & REPLACEMENT HANDLES 29
Angle Finders DASCO PRO angle finders are molded of high impact plastic and allow the user to read any angle instantly and accurately from 0 to 90 in any quadrant. Accurate to within 1/2 of 1. Not affected by magnetic fields, cold or heat. Angle and grade chart on back shows angles in degrees and converts them to pitch per inch and pitch per foot. Available with optional features such as magnetic base, V-groove sides for easy use on round surfaces, plumb and level vials. ANGLE FINDERS AF100 AF200M AF300 1100 Inclinometer AF700VM AF700M AF100 ANGLE FINDER 2-3/4 100007 10 AF100M ANGLE FINDER WITH MAGNET 2-3/4 100809 10 AF100-2VM ANGLE FINDER 2 VIALS & MAGNET 2-3/4 102988 10 AF200M ANGLE FINDER WITH MAGNET 2-3/4 200806 10 AF200VM ANGLE FINDER W/ VIAL & MAGNET 2-3/4 202985 10 AF300 ANGLE FINDER 4 300001 10 AF300-2V ANGLE FINDER W/ 2 MAGNETS 4 300803 10 AF700M ANGLE FINDER WITH MAGNET 4 700009 10 AF700VM ANGLE FINDER WITH VIAL AND MAGNET 4 700801 10 AF30 ANGLE FINDER ATTACHMENT 1 301114 EA I1100-2VM INCLINOMETER W/2 VIALS & MAGNET 3 110020 EA 30
Giant Circle Beam Compass A handy, economical tool for both the contractor and do-it-yourselfers, the DASCO PRO Giant Circle Beam Compass lets you scribe accurate circles up to 10 ft. in diameter or larger using a 1/2 O.D. dowel rod, PVC or rigid metal tubing as the beam. 1405 BEAM COMPASS W/ ROD 12 000840 3 1400 BEAM COMPASS NO ROD Adjustable 014007 3 MISCELLANEOUS Scratch Awl-One Piece Drop Forged The DASCO PRO 7 in. Scratch Awl is a 1-piece forged steel tool designed to start holes in soft wood and scribe or mark wood and other soft materials. 431-0 7 SCRATCH AWL - CARDED 7 043106 3.... 431 7 SCRATCH AWL 7 043102 3 31
SnowPole Driveway Markers The DASCO PRO SnowPole is used to mark driveways, culverts, roadways, hazards and other areas. We offer a variety of different options, including a strip of highly reflective tape for 360 night time visibility. Markers feature a durable fiberglass rod, which will withstand the elements and abuse. but flexible enough to bend and return to its original position. It will not bend out of shape like metal or aluminum markers. We offer a eye catching pyramid display to merchandise all the Snow Poles. MISCELLANEOUS 663 WHITE MARKER W/RED & BLUE TAPE 4 000073 36 664 YELLOW MARKER W/WHITE TAPE 4 000080 36 665 ORANGE MARKER W/WHITE TAPE 4 000097 36 667 CAUTION POLE W/CAUTION TAPE CLIP 4 000424 20 32
Kits DASCO PRO offers the most frequently used and popular items in kits. Professionals and homeowners alike can grab a kit with confidence that they have the most sought after tool for the job. KITS Kit # Description UPC Pack 018371-9 14 PC PUNCH & CHISEL KIT W/POUCH 502870 1 1 - Center Punch - 531-5/16.. 3 - Solid Punch - 564-1/8, 565-5/32, 566-3/16.. 1 - Starter Punch - 562-3/32.. 4 - Pin Punch - 581-3/32, 582-1/8, 584-3/16, 589-1/4.. 5 - Cold Chisel - 405-1/2, 406-5/8, 408-3/4, 413-7/8, 417-1... 10 18 PC PUNCH & CHISEL KIT W/POUCH 502887 1.. 1 - Center Punch - 531-5/16.. 3 - Solid Punch - 564-1/8, 565-5/32, 566-3/16.. 1 - Starter Punch - 562-3/32.. 4 - Pin Punch - 581-3/32, 582-1/8, 584-3/16, 589-1/4.. 5 - Cold Chisel - 402-3/8, 405-1/2, 406-5/8, 408-3/4, 413-7/8.. 3 - Alignment Punch - 601-1/8, 603-3/16, 606-1/4.. 1 - Drift Punch - 608-5/16 12 3 PC ALIGNMENT KIT W/POUCH 502870 3.. 601-1/8, 602-5/32, 604-3/16 13 5 PC PUNCH & CHISEL KIT W/POUCH 502887 1.. 2 - Cold Chisel - 405-1/2, 406-5/8.. 1 - Solid Punch - 565-5/32.. 1 - Pin Punch - 584-3/16.. 1 - Center Punch - 532-7/16 14 8 PC PUNCH & CHISEL KIT W/POUCH 502511 1.. 1 - Center Punch - 531-5/16.. 1 - Solid Punch - 565-5/32.. 3 - Pin Punch - 582-1/8, 584-3/16, 589-1/4.. 3 - Cold Chisel - 402-3/8, 405-1/2, 406-5/8 15 12 PC PUNCH & CHISEL KIT W/POUCH 502528 1.. 1 - Prick Punch - 540-5/16.. 2 - Center Punch - 531-5/16, 532-7/16.. 2 - Solid Punch - 564-1/8, 565-5/32.. 4 - Pin Punch - 581-3/32, 582-1/8, 583-5/32, 584-3/16.. 3 - Cold Chisel - 402-3/8, 405-1/2, 406-5/8 33
16 6 PC PIN PUNCH KIT W/POUCH 502533 1.. 2 - Pin Punch - 581-3/32, 581-3/32 (two 3/32 in set).. 4 - Pin Punch - 582-1/8, 583-5/32, 584-3/16, 589-1/4 KITS 17 5 PC COLD CHISEL KIT W/POUCH 502542 1.. 402-3/8, 405-1/2, 406-5/8, 408-3/4, 413-7/8 18 5 PC ROLL PIN PUNCH KIT W/POUCH 502559 1.. 253-1/8, 254-5/32, 255-3/16, 256-7/32, 257-1/4 22 6 PC PIN PUNCH 000628 3.. 592-1/16, 582-1/8, 583-5/32, 584-3/16, 589-1/4, 590-5/16 23 4 PC PIN PUNCH 502597 3.. 581-3/32, 582-1/8, 583-5/32, 584-3/16... 29 4 PC PUNCH & CHISEL 502368 3.. 2 - Cold Chisel - 402-3/8, 408-3/4 Pin Punch - 582-1/8.. Starter Punch - 562-3/32.. 30 5 PC PUNCH & CHISEL 310000 3.. 2 - Cold Chisel - 402-3/8, 408-5/8.... Pin Punch - 582-1/8.. Starter Punch - 562-3/32.. Center Punch - 532-7/16... 31 6 PC PUNCH & CHISEL 501262 3.. 2 - Cold Chisel - 405-1/2, 408-3/4.. 1 - Center Punch - 531-5/16.... 2 - Pin Punch - 581-3/32, 582-1/8.... 1 - Drift Punch - 603-3/16... 32 9 PC PUNCH & CHISEL 501279 3.. 2 - Cold Chisel - 405-1/2, 408-3/4.. 1 - Center Punch - 531-5/16.... 1 - Prick Punch - 541-3/8.... 3 - Pin Punch - 581-3/32, 592-1/16, 582-1/8.... 2 - Drift Punch - 601-1/8, 603-3/16... 33 3 PC STARTER/MARKING PUNCH 000826 3 1 - Center Punch - 531-5/16.. 1 - Starter Punch - 562-3/32.. 1 - Prick Punch - 541-3/8 34
... 34 3 PC SMALL PIN PUNCH KIT 502184 3 592-1/16, 582-1/8, 583-5/32... 35 3 PC LARGE PIN PUNCH KIT 502191 3 582-1/8, 584-3/16, 589-1/4... 43 3 PC COLD CHISEL 502764 3 401-5/16, 402-3/8, 405-1/2 KITS 44 3 PC COLD CHISEL 000635 3.. 401-5/16, 406-5/8, 408-3/4... 76 3 PC PRO NAIL SET (PRO GRIP) 502344 6.. 796-1/32, 797-2/32, 798-3/32... 77 3 PC NAIL SET (BLACK OXIDE) 500340 5.. 696-1/32, 697-2/32, 698-3/32... 88 12 PC PUNCH & CHISEL KIT 501149 3.. 3 - Cold Chisel - 401-5/16, 406-5/8, 408-3/4.. 1 - Prick Punch - 541-3/8.. 1 - Center Punch - 530-1/4.. 3 - Pin - 592-1/16, 582-1/8, 583-5/32.. 3 - Pin - 584-3/16, 589-1/4, 590-5/16.. 1 - Scratch Awl - 431-7 Long... 90 2 PC BAR KIT 502757 2 1-7.5 Ultra Bar II.. 1-9 Trim/Pry Bar... 91 3 PC SMALL BAR KIT 502375 4.. 1-5.5 LiL Bar.... 1-7.5 Ultra Bar II.... 1-9 Trim/Pry Bar... 92 2 PC BAR KIT 502566 3.. 24 Spartacus Bar.. 11 Double End Nail Puller... 93 3 PC BAR KIT 502573 3.. 15 Pro Bar.. 9-1/2 Pry Bar/Scraper.. 5-1/2 LiL Bar.. 35
Assortments Item # Description UPC Pack 7001 24 PC COLD CHISEL. 070010 1 7003 24 PC CENTER/PRICK PUNCH. 070034 1 7004 24 PC PIN PUNCH. 070041 1 7007 12 PC FLOOR/ELECT. CHISEL. 070072 1 7008 12 PC MASONS CHISEL. 070089 1 7009 15 PC LONG COLD CHISEL. 070096 1 7010 15 PC BRICK SET. 070102 1 6014 12 PC BAR. 060141 1 7200 69 PC MASTER. 072007 1 8665 144 PC ULTRAFLECTOR MARKER. 641599600204 1 ASSORTMENTS 36
Contact Us DASCO PRO, Inc. 340 Blackhawk Park Avenue Rockford, IL 61104 Toll free (800) 327-2690 Phone: (815) 962-3727 Fax (815) 962-4972 Sales / Customer Service Office (815) 962-3727 ext 209 Customer Service Office (815) 962-3727 ext 210 37