AR111 12.5W OUTPUT RANGE: VIVID SERIES OUTPUT RANGE: BRILLIANT SERIES BEAM ANGLE RANGE COLOR TEMPERATURE RANGE APPLICATION 5-6 lumen 735-795 lumen 8,, 36, 27K, 3K, 4K, K Halogen replacement for indoor & outdoor applications DIM POINT SOURCE OPTICS Exceptional beam control enables unique 8 narrow spot and smooth uniform beams Single light source, single crisp shadow VP 3 VIVID COLOR & VP 3 NATURAL WHITE VIVID series provides accurate color rendering across the visible spectrum from 4nm to 7nm, with CRI/95*, R9/95*, Rf/9, Rg/ Whiteness rendering matches or exceeds that of halogen and incandescent sources at 27K and 3K ENERGY EFFICIENCY & LONG LIFE 85% more energy efficient than standard halogen lamps Typical payback of one year or less Rated lifetime of 35, hours. 3 year warranty CERTIFICATIONS FCC Title 47 Part 15B, RoHS, CE HIGHLY COMPATIBLE Narrow spot compatible with Soraa SNAP System accessories Thermally and geometrically compatible with standard fixtures and suitable for damp locations Suitable for fully enclosed fixtures. Can be used with front glass cover Works with trailing edge and leading edge phase cut dimmers, 12V AC magnetic and electronic transformers and 12V DC transformers (see www.soraa.com/resources) INTENDED USE AND APPLICATIONS Intended for use in AR111 compatible recessed downlights, track lighting and other indoor and outdoor applications Soraa lamps are designed to safely turn down in any thermal environment not conducive to minimum airflow or proper ventilation GENERAL SPECIFICATIONS Form Factor Operating Temperature Electrical Dimming and Flicker Width: 111mm (4.37 ) Minimum: -4 C (ambient) Wattage: 12.5W Dimmable to <2% Height: 57mm (2.24 ) Typical: 6 C - 7 C (base) Power factor:.92 Flicker Index <.1 Weight: g Maximum: 8 C (base) Voltage: 12V +/- 1.2V Percent Flicker: 28% Frequency: /6Hz *Metrics apply to 27K, 3K, 4K. K color metrics are CRI/9, R9/95
DIMENSIONS COLOR RENDERING 111mm (4.37 ) 57mm (2.24 ) Base Temperature Measured Here No Violet Cyan gap Red lack 8 DEGREE BEAM DEGREE BEAM Beam Dia at % Intensity (m) Field Dia at 1% Intensity (m) Lux (% of Intensity) Beam Dia at % Intensity (m) Field Dia at 1% Intensity (m) Lux (% of Intensity).1.2 61% 1 m.4.7 61%.3.5 21%.4.7 11% 2 m 3 m.9 1.5 21% 1.3 2.2 11%.6 1. 6% 4 m 1.8 2.9 6%.7 1.2 4% 5 m 2.2 3.6 4% 36 DEGREE BEAM DEGREE BEAM Beam Dia at % Intensity (m) Field Dia at 1% Intensity (m) Lux (% of Intensity) Beam Dia at % Intensity (m) Field Dia at 1% Intensity (m) Lux (% of Intensity).6 1.2 61% 1 m.9 1.7 61% 1.3 2.3 21% 1.9 3.5 11% 2 m 3 m 1.9 3.4 21% 2.8 5. 11% 2.6 4.6 6% 4 m 3.7 6.7 6% 3.2 5.8 4% 5 m 4.7 8.4 4% Note: Lux may be calculated by multiplying the peak Intensity of the desired model number by the percentage in the tables above
SPECIFICATIONS BY MODEL NUMBER* SORAA LED AR111 12.5W Model # Product Code CCT (K) Beam Angle Field Angle Peak Intensity Total Flux (Lm) Efficacy (Lm/W) 9 Lumens McA EEI SNAP VIVID SERIES SR111-12-8D-927-3-S3 1427 27 8 14 1552 5 46 515 3 A YES SR111-12-D-927-3-S3 1429 27 4 3 5 46 52 3 A - SR111-12-36D-927-3-S3 1431 27 36 6 142 5 46 5 3 A - SR111-12-D-927-3-S3 1433 27 8 74 5 46 515 3 A - SR111-12-8D-93-3-S3 1443 3 8 14 1674 62 555 3 A YES SR111-12-D-93-3-S3 1445 3 4 334 62 56 3 A - SR111-12-36D-93-3-S3 1447 3 36 6 154 62 545 3 A - SR111-12-D-93-3-S3 1449 3 8 8 62 555 3 A - SR111-12-8D-94-3-S3 1459 4 8 14 174 645 52 58 4 A YES SR111-12-D-94-3-S3 1461 4 4 348 645 52 585 4 A - SR111-12-36D-94-3-S3 1463 4 36 6 16 645 52 565 4 A - SR111-12-D-94-3-S3 1465 4 8 82 645 52 58 4 A - SR111-12-8D-9-3-S3 1467 8 14 14 6 52 585 5 A YES SR111-12-D-9-3-S3 1469 4 3 6 52 59 5 A - SR111-12-36D-9-3-S3 1471 36 6 162 6 52 57 5 A - SR111-12-D-9-3-S3 1473 8 84 6 52 585 5 A - BRILLIANT SERIES SR111-12-8D-827-3-S3 1435 27 8 14 1984 735 59 66 3 A YES SR111-12-D-827-3-S3 1437 27 4 396 735 59 665 3 A - SR111-12-36D-827-3-S3 1439 27 36 6 182 735 59 645 3 A - SR111-12-D-827-3-S3 1441 27 8 94 735 59 66 3 A - SR111-12-8D-83-3-S3 1451 3 8 14 2146 795 64 715 3 A YES SR111-12-D-83-3-S3 1453 3 4 428 795 64 72 3 A - SR111-12-36D-83-3-S3 1455 3 36 6 198 795 64 695 3 A - SR111-12-D-83-3-S3 1457 3 8 12 795 64 715 3 A - CCT: Correlated Color Temperature McA: White Point Accuracy in McA step SNAP: SORAA SNAP System Compatible EEI: Energy Efficiency Index *Specifications are at stable warm operating conditions ( C ambient)
SERIES/CCT COLOR ACCURACY WHITENESS INDEX SPECTRAL POWER DISTRIBUTION 1 VIVID 27K Rf: 9, Rg:, Rfh1: 95 Rw: 12 CRI: 95, R9: 95 1 VIVID 3K Rf: 9, Rg:, Rfh1: 95 Rw: 12 CRI: 95, R9: 95 1 VIVID 4K Rf: 9, Rg:, Rfh1: 95 Rw: 7 CRI: 92, R9: 95 1 VIVID K Rf: 9, Rg:, Rfh1: 95 Rw: CRI: 9, R9: 95
SERIES/CCT COLOR ACCURACY WHITENESS INDEX SPECTRAL POWER DISTRIBUTION 1 BRILLIANT 27K Rf: 85, Rg: 92, Rfh1: 77 Rw: CRI: 85, R9: > 1 BRILLIANT 3K Rf: 85, Rg: 92, Rfh1: 77 Rw: CRI: 85, R9: > Rf: TM-3 metric measuring color fidelity (whether colors are similar to those under natural light). Rf is a more accurate version of the CRI Ra. Rf is for natural light. Rg: TM-3 metric measuring color gamut (whether colors are more saturated than under natural light). Rg is for natural light. Rfh1: TM-3 metric measuring color fidelity for red tones. Rfh1 is a more accurate version of the CRI R9. Rfh1 is for natural light. Rw: Soraa-developed metric to measure white fidelity. Rw measures the magnitude of excitation of whitening agents within whites. Rw is about for natural light. Information and specifications subject to change. SR111 12.5W Rev 1 4.24.16 Soraa Inc. Unit 1 Chelsing House, Mead Lane, Hertford, Hertfordshire SG13 7AW, United Kingdom +44 ()1992 5353 www.soraa.com
SNAP SYSTEM ACCESSORIES LARGE (4") DESCRIPTION ATTACHMENT The award winning Soraa SNAP SYSTEM TM is the first LED lamp/accessory solution that is optimized to work as an integrated system. Based on high brightness single source GaN on GaN LED technology, it completely redefines accessory application. The effects that can be achieved are similar to what can be done with halogen sources, but are enabled by a relatively low operating temperature and ground-breaking optical design, materials, and methods of attachment. The SNAP SYSTEM was designed around the idea of ease and simplicity while delivering maximum versatility for the user. Because of its thin and simple magnetic attachment the use of bulky and costly fixture and adaptors are a thing of the past. Now it is possible to have both an affordable yet sophisticated system that provides ultimate design possibilities. STACKING ACCESSORIES The SNAP SYSTEM's self-centering magnetic interconnect system makes using accessories completely user friendly. Simply attached the SNAP SYSTEM accessory directly to any Narrow Spot Soraa lamp, the magnetic force from both the accessory and lamp will securely attached to one another and center itself. COMPATIBILITY The SNAP SYSTEM accessories Large (4") are compatible with the lamps and Optical Light Engines outlined below. The SNAP SYSTEM are only compatible with SORAA Narrow Spot Lamps and Optical Light Engines. See each accessory data for exact diameter. Large (4") PAR3 PAR38 SNAP SYSTEM accessories can be stacked in combination. For example, a beam spreader can be used in combination with CCT shifter. When combining the beam shaping Snap accessory with CCT shifting Snap Accessory, for best results always place CCT shifting Snap on the lamp first, as shown in diagram below. AR111 OLE/C 3 PHOTOMETRICS 4" (11MM) Beam Shaping Snap CCT Shift Snap IES files and photometric data of accessories is available for download at www.soraa.com
SORAA SNAP SYSTEM LED ACCESSORIES - LARGE (4") BEAM SPREADER SNAP Use in any application where reducing the number of beam angle SKUs is required. Reduces inventory costs. Shortens specification, design, sales cycles. Provides maximum flexibility up to the time of installation. Beam Part Number Product CBCP of Field Code 1 Lamp Angle AC-E-GC-- 1145 18% 4 36 AC-E-GC-3636-1147 8% 55 6 AC-E-GC-66-1149 3% 9 Lumen Transmissivity: 9% Diameter: 84. mm Thickness: 3.1 mm Magnetic Attach Force:.45 lb-f LINEAR SNAP Use in wall washes and illuminating asymmetric objects. Reduces required number of light fixtures and spill illumination of target objects. Beam Part Number Product CBCP of Field Field Code 1 Lamp Angle Angle Horiz. Vert. 1-36 AC-E-GE-136-1595 3% 27 43 Lumen Transmissivity: 9% Diameter: 84. mm Thickness: 3.1 mm Magnetic Attach Force:.45 lb-f LOUVER SNAP Eliminates high angle glare, making light beams disappear in downlight applications. Cutoff Part Number Product CBCP of Angle Code 1 Lamp 4 AC-E-LU-44-1151 63% Diameter: 84. mm Thickness: 9. mm Magnetic Attach Force:.45 lb-f Reduces angular intensity to.1% of peak at 4 full angle. Fits around lamp face. Can be used in combination with gimbal ring fixtures.
SORAA SNAP SYSTEM LED ACCESSORIES - LARGE (4") CCT SHIFTER SNAP Use in hospitality and restaurant applications to simulate warm dimming. Create custom colors for festive occasions or brand identity. Single Lamp SKU can be used for multiple color temperatures CTO* Part Number Product Lumen Mired Code Transmission Shift 1/4 AC-E-CC-1-1153 9% 37 1/2 AC-E-CC-2-1155 % 83 3/4 AC-E-CC-3-1157 6% 12 *Color Temperature Orange Diameter: 84. mm Thickness: 3.1 mm Magnetic Attach Force:.45 lb-f CCT SHIFT EFFECT Starting 1/4 CTO 1/2 CTO 3/4 CTO Lamp CCT 2,7K 2,4K 2,2K 2,K 3,K 2,7K 2,4K 2,2K 4,K 3,K 3,K 2,7K 5,K 4,K 3,5K 3,1K CLEAR SNAP Use together with gel and dichroic filters for total color freedom. Produce the exact mood and effect for any environment with the Clear SNAP accessory, CL Suggested way of use for: Gel Filter Dichroic Filter Clear Snap are sold in quantities of ten. Part Number Product Lumen Lumen Code Transmissivity Transmissivity (1 Snap) (2 Snaps) AC-E-CL-- 2185 93% 87% Diameter: 84. mm Thickness: 3.1 mm Magnetic Attach Force:.45 lb-f CLEAR SNAP GEL DICHROIC CLEAR SNAP Soraa Inc. Unit 1 Chelsing House, Mead Lane, Hertford, Hertfordshire SG13 7AW, UK +44 ()1992 5353 www.soraa.com Information and specifications subject to change. Rev A 11316