Metrology PROMO 13.1E Automatic off after 5 minutes with no loss of position Accuracy meets DIN862 Resolution:.0005" (0.01mm).0005" (0.01mm) Grads Call 00 44 (0)1835 863501 today
IP67 Electronic Calipers IP67 level of protection against coolant, water, dirt and dust Hardened stainless steel measuring surfaces for long life Fine adjustment Inch/mm conversion Large easy-to-read display Heavy-duty bar and slide, 3.5mm thick Resolution: 0.01mm (0.0005") With output 798B-6/150 0-150mm (0-6") 181.28 124.00 798B-8/200 0-200mm (0-8") 214.62 144.00 798B-12/300 0-300mm (0-12") 339.07 219.00 Electronic Calipers Hardened stainless steel body Fine adjustment thumb wheel Inch/mm conversion Resolution: 0.01mm (0.0005") Long Range Calipers Preset and hold feature Max/Min limits set I.D. is 20.32mm / 0.800" Auto shut-off after 30 minutes of non-use 799A-6/150 0-150mm (0-6") 92.70 62.00 799A-8/200 0-200mm (0-8") 147.29 90.00 799A-12/300 0-300mm (0-12") 216.30 157.00 799AZ-24/600 0-600mm (0-24") 401.77 349.00 799AZ-40/1000 0-1000mm (0-40") 663.06 570.00 Dial Calipers Quick, accurate measurement of O.D., I.D. and depth Hardened stainless steel bar, measuring surfaces, rack, gears and depth rod Sharp, black graduations on the satin finished bar. Knife edge contacts Cat No Range Graduations List Sale 1201M-150 150mm 80.34 68.00 0.01mm 1201M-200 200mm 176.13 129.00 1202M-150 150mm 79.57 61.00 1202M-200 200mm 0.02mm 154.59 99.00 1202M-300 300mm 247.20 159.00 Vernier Calipers High quality, basic vernier caliper that offers inch and metric measurement Sharp, black graduations on the satin finished bar Graduations: 0.02mm (0.001") 125MEA-6/150 0-150mm (0-6") 36.86 28.00 125MEA-8/200 0-200mm (0-8") 56.76 49.00 125MEA-12/300 0-300mm (0-12") 170.41 129.00 125MA-150 0-150mm 36.86 28.00 125MA-200 0-200mm 56.76 49.00 125MA-300 0-300mm 170.41 129.00 125MB-150 0-150mm 32.89 26.00 125MB-200 0-200mm 50.92 42.00 125MB-300 0-300mm 144.28 125.00 125MEB-6/150 0-150mm (0-6") 32.89 26.00 125MEB-8/200 0-200mm (0-8") 50.92 42.00 125MEB-12/300 0-300mm (0-12") 144.28 125.00 starrett.co.uk Carbon Fibre Calipers Coolant resistant With data output Protective wooden case mm/inch conversion On/Off button Titanium coated stainless steel outside measurement jaws Hold Feature will freeze the display when in REF I or REF II mode Two preset modes, REF I and REF II, allow a master setting and a zero setting B5000BZ-20/500 0-500mm (0-20") 1405.69 1199.00 B5000BZ-24/600 0-600mm (0-24") 1484.20 1275.00 B5000BZ-40/1000 0-1000mm (0-40") 1644.40 1369.00 Electronic Groove Calipers Coolant resistant With data output Protective wooden case mm/inch conversion On/Off button Hold Feature will freeze the display when in REF I or REF II mode Two preset modes, REF I and REF II, allow a master setting and a zero setting 5006BZ-14/350 Inside 42-381mm (1.654-15") Outside 0-318mm (0-12.5") 762.79 650.00 2 Specifications subject to change Promo 13.1e
IP67 Electronic Outside Micrometers IP67 level of protection against coolant, water, dirt and dust Balanced, tapered frame and hard, stable one piece spindle Zero the reading at any position Micro-lapped carbide measuring faces Large, easy-to-read LCD readout 795 Series with Output Resolution: 0.001mm/ (0.00005") Electronic Outside Micrometers Extremely hard and stable one-piece spindle Micro-lapped carbide measuring faces Instant inch/mm conversion Ability to zero at any position Measurement HOLD button 795MEXFL-25 0-25mm (0-1") 221.45 189.00 795MEXFL-50 25-50mm (1-2") 300.76 255.00 795MEXFL-75 50-75mm (2-3") 365.65 309.00 795MEXFL-100 75-100mm (3-4") 414.06 339.00 796MXFL-25 0-25mm (0-1") 158.62 135.00 Cat No Range Resolution List Sale 3732MEXFL-25 0-25mm (0-1") 133.52 112.00 3732MEXFL-50 25-50mm (1-2") 251.01 199.00 3732MEXFL-75 50-75mm (2-3") 0.001mm 304.43 239.00 3732MEXFL-100 75-100mm (3-4") (0.00005") 342.57 279.00 3732MEXFL-125 100-125mm (4-5") 380.72 299.00 3732MEXFL-150 125-150mm (5-6") 418.87 349.00 Metric Outside Micrometers Accurate, rugged and easy to use Advanced sleeve design with distinct figures for precise readability Ring type knurled lock nut Ratchet stop Starrett satin chrome finish Graduation: 0.01mm 436.2MXRL-25 0-25mm 36.05 30.00 436.1MXRL-50 25-50mm 51.50 44.00 436.1MXRL-75 50-75mm 67.98 58.00 436.1MXRL-100 75-100mm 74.16 62.00 436.1MXRL-125 100-125mm 117.42 89.00 436.1MXRL-150 125-150mm 130.81 99.00 Imperial Outside Micrometers Accurate, rugged, and easy to use Advanced sleeve design with distinct figures for precise readability Ring type knurled lock nut Ratchet stop Starrett satin chrome finish Graduation: 0.001" 436.1XRL-1 0-1" 36.05 30.00 436.1XRL-2 1-2" 51.50 44.00 436.1XRL-3 2-3" 67.98 58.00 436.1XRL-4 3-4" 74.16 62.00 436.1XRL-5 4-5" 117.42 89.00 436.1XRL-6 5-6" 130.81 99.00 Outside Micrometer with Thermal Cover Micrometer with a thermal insulator cover mounted onto the frame to avoid measuring errors Advanced sleeve design with distinct figures for precise readability Ratchet stop Starrett satin chrome finish Graduation: 0.01mm Interchangeable Anvil Micrometers Graduations: 0.01mm (0.001") Interchangeable anvils provide a range in steps of 25mm/1" with a single micrometer Ring-type knurled lock nut for quick and sure locking Combination ratchet and speeder for uniform pressure Advanced sleeve design with distinct figures for precise readability Balanced, rigid, ribbed and perforated cast iron frame 444MXRL-25 0-25mm 34.25 28.00 Cat No Range Standards List Sale 224MAARLZ 0-100mm 25, 50 & 75mm 300.61 187.50 224AARLZ 0-4" 1", 2" & 3" 340.74 187.50 Prices in Euros Promo 13.1e 3
Depth Micrometer Ring type lock nut and ratchet stop Combination ratchet and speeder for uniform pressure and quick adjustment 3.2mm (1/8") diameter rods Graduations: 0.01mm (0.001") Solid Rod Inside Micrometer Sets Insulated rods marked with length Hardened and ground anvils on rods, adjustable for length Head anvil is hardened and ground Quick-reading figures Graduations : 0.01mm (0.001") Cat No Range Base Rods List Sale 440MZ-75RL 0-75mm 3 136.57 99.00 440MZ-150RL 0-150mm 63.5mm 6 211.12 175.00 440MZ-225RL 0-225mm 9 265.23 199.00 440Z-3RL 0-3" 3 116.70 99.00 440Z-6RL 0-6" 2.1/2" 6 211.12 175.00 440Z-9RL 0-9" 9 265.23 199.00 Cat No Range Screw Movement Spacing Columns Measuring Rods List Sale 124MAZ 50-200mm 6 198.10 159.00 13mm One 12mm 124MBZ 50-300mm 10 237.72 189.00 124AZ 2-8" 6 198.10 159.00 1/2" One 1/2" 124BZ 2-12" 10 237.73 189.00 IP67 Electronic Indicators True Absolute Sensor Technology - remembers position and zero set point even during battery replacement Large, easy-to-read LCD Positive, tactile-feel button activation IP67 level of protection against coolant, water, dirt and dust With data output Choice of Basic, Standard and Advanced feature levels Electronic Indicators Simple, powerful, easy-to-use Large, easy-to-read LCD Reverse travel Lug-on-center back plus additional flat back 3/8" diameter stem 4-48 spindle thread Resolution: 0.01mm (0.0005") Cat No Range Resolution List Sale 2900-1 0.001mm (0.00005") 238.04 205.00 2900-2 0.001mm (0.0001") 214.24 185.00 12mm (0.5") 2900-4 0.01mm / 0.001mm (0.0005" / 297.56 256.00 2900-6 0.0001" / 0.00005') 351.72 299.00 Cat No Range AGD List Sale 3600-5 12.7mm (0.500") AGD-2 102.11 74.00 starrett.co.uk Dial Indicators Shockless, hardened steel gear train and long life jewel bearings Indicators supplied with lug backs Indicators furnished with top lift Cat No Range Dial Reading Graduation List Sale 3025-257J 1mm 0-200 0.001mm 74.26 62.00 3025-481 10mm 0-100 0.01mm 25.46 22.00 3025-481/5 5mm 0-100 0.01mm 41.38 36.00 Universal Back Plunger Dial Indicators 0.02mm graduations 5mm range 6.3mm (1/4") shank diameter Accurate, reliable, and simple to operate Rugged, with few moving parts Smooth operation Cat No Dial Reading List Sale 196MB1 0-100 110.67 86.00 196MA5Z 0-50-0 189.25 156.00 4 Specifications subject to change Promo 13.1e
Dial Test Indicators Precision gear-driven design with smooth, jeweled movement Angled head for better reading position Large 35mm (1.3/8") dial diameter Contact point reverses automatically, always maintaining clockwise hand rotation Contacts are frictionally adjustable and replaceable Dial Comparator With Cast Iron Base Indicator not included. Bench type comparator is ruggedly built for in-process and final inspection work Dial indicator can be adjusted vertically and locked in any position A sliding ring with locking screw below the beam permits swinging the indicator to either side Base measures 200 x 225mm 3709A Limited Stock Available Cat No Range Grads Dial Reading List Sale 3709A 0.030" 0.0005" 0-15-0 81.55 35.00 3808MA 0.2mm 0.002mm 0-100-0 90.18 69.00 3809MA 0.8mm 0.01mm 0-40-0 66.64 57.00 653 Comparator with Cast Iron Base 448.63 375.00 Electronic Height Gauge Large LCD display reads to 0.01mm (0.0005") Clear bar graduations in 5mm and 0.100" increments Instant inch/mm conversion HOLD feature retains a reading at any position Large positive action keypad Ability to retain and return to the true zero reading of the height gauge Electronic Height Gauge Easy-to-read LCD display Rounded nose scriber cuts clean, sharp lines with smoothness and less pressure Lock to hold the slide in position Hardened, ground, and lapped base with finger grooves provides ease of movement Scriber can reference zero from the bottom of the base Inch/mm conversion Manual ON/OFF plus a built in automatic OFF after 5 minutes of non-use 3752-24/600 0-600mm (0-24") 925.48 719.00 Cat No Accuracy Resolution List Sale 3751AZ-6/150 ±0.02mm (±0.001") 0.01mm (0.0005") 248.25 215.00 Electronic Depth Gauge Large easy-to-read display Hardened, stainless steel bar and slide Fine adjustment thumb roll Slide lock Inch/mm conversion Linear Accuracy: ±0.03mm (±0.001") Resolution: 0.01mm (0.0005") Electronic Depth Gauge Hardened stainless construction Coolant resistant With data output Protective wooden case Resolution: 0.01mm (0.0005") Includes offset attachment 3753A-6/150 0-150mm (0-6") 222.59 190.00 3753A-8/200 0-200mm (0-8") 250.73 210.00 3753A-12/300 0-300mm (0-12") 292.50 240.00 5004BZ-16/400 0-400mm(0-16") 796.96 658.00 5004BZ-24/600 0-600mm (0-24") 1171.49 999.00 Prices in Euros Promo 13.1e 5
Dial Bore Gauges Ergonomic design with non-slip insulating grip Carbide contacts for extended wear 2-point contact Gauge chart for quick and easy anvil selection Cat No Range Probe Depth Contacts List Sale 3089M-181-35J 18-35mm 125mm 9 230.72 149.00 3089M-181-50J 35-50mm 4 224.54 149.00 150mm 3089M-181-160J 50-160mm 12 246.13 162.00 3089M-181-250J 160-250mm 400mm 5 302.36 250.00 S3089MZ-181-160J 18-160mm 125-150mm 9, 4, 12 351.23 300.00 3089Z-131-715J 0.7-1.5" 10 257.80 149.00 3089Z-131-1424J 1.4" - 2.4" 6 232.34 149.00 6" 3089Z-131-26J 2" - 6" 11 246.13 162.00 S3089Z-131-6J 0.7" - 1.5" 10, 4, 1, 2 423.30 300.00 Magnetic Indicator Holders For use with all Starrett test, back-plunger and AGD style dial indicators Also for use with similar indicators of other manufacturers Small, powerful, permanent magnetic base holds firmly to steel or iron surfaces All bases have precision ground magnetic surfaces 660 Holder with magnetic base & triple jointed arm 86.05 74.00 3657AA Holder with magnetic base & attachments 57.91 49.00 3657MTW Holder with magnetic base & flexible arm 127.31 99.00 Machinists' Levels Steel Rules Cast iron base, precisionmachined on reference surfaces with black wrinkle finish on non-machined surfaces Involute groove running the length of the base for round work Ground and graduated vials housed in a satin chrome finished brass tube Capable of leveling in both directions Spring tempered Satin chrome finish Hardened steel 98-6 6" (150mm) with Cross Test Vial 96.22 83.00 98-8 8" (200mm) with Cross Test Vial 122.27 99.00 98-12 12" (300mm) with Single Ground Plumb and Cross Test Vials 164.23 135.00 Cat No Length Graduation List Sale C635-150 150mm 16.79 12.00 mm & 1/2mm Both Sides C635-300 300mm 36.25 24.00 C636ME-150 150mm (5.3/4") 32nds & 1/2mm; 64ths 17.55 12.00 C636-300 300mm (11.3/4") & mm 36.25 24.00 starrett.co.uk Squares Toolmakers' grade Hardened, ground and lapped stainless steel construction The beam is machined at the inner corner for clearance of burr or dirt 3020M-75 75mm (3") 62.59 44.00 3020M-100 100mm (4") 83.81 57.00 3020M-150 150mm (6") 105.03 69.00 3020M-300 300mm (12") 179.29 125.00 Squares Hardened, ground and lapped stainless steel construction F Series - Plain without base B Series - Bevel without base Cat No Description Accuracy List Sale 60F-75 75 x 50mm 39.22 24.00 60F-100 100 x 70mm 43.78 29.00 60F-150 150 x 100mm 60.99 39.00 60F-200 200 x 130mm 91.53 62.00 0.005mm per 60B-50 50 x 40mm 37.23 23.00 150mm of blade 60B-75 75 x 50mm 43.76 25.00 60B-100 100 x 70mm 51.72 32.00 60B-150 150 x 100mm 67.63 44.00 60B-200 200 x 130mm 92.30 69.00 6 Specifications subject to change Promo 13.1e
Combination Sets Square head, centre head, reversible protractor head and blade Reversible lock bolts, scriber & spirit level in both square and protractor heads Hardened steel blade Scribers Finely tapered so that the point can be easily seen on the work Long bent point is handy for reaching through holes The length of the scriber with the short point is 225mm (9") The length of the scriber with the long bent point is 300mm (12") Cat No Size Graduation List Sale 435ME-300 300mm (11.3/4") 1/2mm & 32nds, 186.78 99.00 435ME-600 600mm (23.1/2") mm & 64ths 220.19 175.00 Limited Stock Available 67B Complete with 2 points (1 Straight, 1 Short Bent) 20.82 12.00 Metric Tool Set Balanced selection of micrometers for outside, inside and depth measurements Furnished in attractive, protective, wooden case Inspection Scopes 2.5" full colour LCD screen displays live video Dual solid state LED illumination Three light intensity settings Full colour image sensor Water resistant shaft Limited Stock Available S906MZ Contents: V230MXRL-25 & V436.1MXRL-50 Micrometers, Depth Micrometer (0-75mm), 823MAZ Tubular Inside Micrometer 739.11 375.00 Limited Stock Available 679-3 3' Inspection Scope with case 301.17 159.00 679-6 6' Inspection Scope with case 370.42 199.00 Prices Prices in Euros in Euros Promo Promo 13.1e 13.1e 7
Distributor The L S Starrett Co Ltd Oxnam Road Jedburgh Scotland TD8 6LR Tel: 00 44 (0)1835 863501 Fax: 00 44 (0)1835 863018 Email: sales@starrett.co.uk Prices in Euros starrett.co.uk Sale Prices Valid 1 April - 28 June 2013 Promo 13.1e 04/13