ZMYV9 to ZMY Zener Diodes PRIMARY CHARACTERISTICS PARAMETER VALUE UNIT range nom..9 to V FEATURES Silicon planar power Zener diodes For use in stablilizing and clipping circuits with high power rating The Zener voltages are graded according to the international E standard. Smaller voltage tolerances are available upon request These diodes are also available in the DO- case with the type designation ZPYV9 to ZPY AEC-Q qualified Compliant to RoHS Directive /9/EC and in accordance to WEEE /96/EC Halogen-free according to IEC 69-- definition Test current T to specification Int. construction Pulse current Single ORDERING INFORMATION DEVICE NAME ORDERING CODE TAPED UNITS PER REEL MINIMUM ORDER QUANTITY ZMYV9 to ZMY ZMYV9 to ZMY-series-GS8 ( mm tape on " reel) /box ZMYV9 to ZMY ZMYV9 to ZMY-series-GS8 ( mm tape on " reel) /box PACKAGE PACKAGE NAME WEIGHT MOLDING COMPOUND FLAMMABILITY RATING MELF DO-AB (glass) mg UL 9 V- MOISTURE SENSITIVITY LEVEL MSL level (according J-STD-) SOLDERING CONDITIONS 6 C/ s at terminals ABSOLUTE MAXIMUM RATINGS (T amb = C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE UNIT Power dissipation Zener current Valid provided that electrodes are kept at ambient temperature See table Characteristics P tot mw Junction to ambient air Valid provided that electrodes are kept at ambient temperature R thja K/W Junction to ambient case R thjc 6 K/W Junction temperature, maximum T j C Storage temperature range T stg - to + C Rev..9, 6-Dec- Document Number: 888 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9
ZMYV9 to ZMY ELECTRICAL CHARACTERISTICS (T amb = C, unless otherwise specified) ZENER VOLTAGE RANGE () TEST CURRENT Notes () Valid provided that electrodes are kept at ambient temperature () Tested with pulses t p = ms REVERSE VOLTAGE DYNAMIC RESISTANCE f = khz ADMISSIBLE ZENER CURRENT () TEMPERATURE COEFFICIENT OF ZENER VOLTAGE PART NUMBER at T T V R at I R Z Z at T VZ at T V V μa - / C MIN. NOM. MAX. MAX. TYP. MIN. MAX. ZMYV9..9. -. - ZMYV..6 -. 8 - ZMYV.. -. 6 - ZMYV.8.... - 6 ZMYV6..6 6.. - ZMY6V.8 6. 6.6. 8-6 ZMY6V8 6. 6.8.. ZMYV..9. ZMY8V. 8. 8. 6. 89 8 ZMY9V 8. 9. 9.6. 8 8 ZMY 9..6.. 9 ZMY..6 8.. 66 ZMY.. 9. 6 ZMY... 9 ZMY.8.8. 9 9 ZMY6. 6.. 6.8 8 9.. ZMY 8.8.. 6 6 ZMY.8.. ZMY.8.6 8. 8 9 ZMY. 8.9. 9 ZMY 8.. ZMY. ZMY6 6 8. 6 ZMY9 9 9. 6 8 8 ZMY 6. 8 8 ZMY. 8 8 ZMY 8 8. 8 ZMY6 6 6. 8 ZMY6 8 6 66. 6 8 ZMY68 6 68. 6 8 ZMY 9 6. 6 9 8 ZMY8 8 88 6. 6 8 8 8 ZMY9 8 9 96 68.. 9 ZMY 9 6. 9 Rev..9, 6-Dec- Document Number: 888 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9
ZMYV9 to ZMY BASIC CHARACTERISTICS (T amb = C, unless otherwise specified) 8 ZMY. ZMY ZMY. ZMY6. ZMY ZMY. P tot W..8.6.. C 9969 T amb Fig. - Dynamic Resistance vs. Zener Current Fig. - Admissible Power Dissipation vs. Ambient Temperature 8 ZMY ZMY6 ZMY ZMY ZMY r tha C/W.... t P t v = P. T P I T. V = - - - - - s 886 t P Fig. - Dynamic Resistance vs. Zener Current Fig. - Pulse Thermal Resistance vs. Pulse Duration 6 ZMY.9 ZMY. ZMY.6 ZMY6.8 T j = C ZMY ZMY8 ZMY68 ZMY6 ZMY 8 ZMY8. ZMY ZMY. 8 6 8 9 V 89 Fig. - Dynamic Resistance vs. Zener Current Fig. 6 - Breakdown Characteristics Rev..9, 6-Dec- Document Number: 888 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9
ZMYV9 to ZMY 6 ZMY ZMY T j = C ZMY6 Tj = C ZMY ZMY ZMY9 ZMY68 ZMY8 ZMY ZMY V 8 V 8 Fig. - Breakdown Characteristics Fig. 8 - Breakdown Characteristics PACKAGE DIMENSIONS in millimeters (inches): MELF DO-AB (glass).6 (.) Cathode identification. (.9). (.). (.).8 (.89) The gap between plug and glass can be either on cathode or anode side Foot print recommendation:. (.9) min.. (.) max.. (.8) min. 8 6. (.6) ref. Rev..9, 6-Dec- Document Number: 888 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9
Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 8-Feb- Document Number: 9