HEATING/PLUMBING RANGE

HEATING/PLUMBING RANGE 86 03 400 NEW The mini pliers wrench: for precision mechanics, particularly suitable for working on small bolted connections, ery good access in ery con ned areas 86 03 125 Pliers Wrenches pliers and a wrench in a single tool Replaces the need for sets of metric and imperial spanners mooth aws for damage free installation of plated ttings working directly on chrome! also excellent for gripping, holding, pressing and bending workpieces zero backlash jaw pressure prevents damage to edges of sensitive components parallel jaws give a more solid grip its design allows exible adjustment of all widths up to the speci ed maximum size lever transmission greater than 10 : 1 for strong gripping power The unique installation tool now also in 400 length, for opening widths up to 85 / 3 3/8" 86 03 125 86 03 150 86 03 180 86 03 250 86 03 300 86 03 400 Adjustment positions Inch 86 03 125 077497 11 7/8 23 125 86 03 150 069676 14 1 27 150 86 03 180 035466 13 1 3/8 35 180 86 03 250 033837 17 1 3/4 46 250 86 03 300 041429 22 2 3/8 60 300 86 03 400 077312 25 3 3/8 85 400 www.knipex.de

Cobra QuickSet Hightech Water Pump Pliers Fully open, push, grab! Additional fast adjustment on the workpiece also without pressing the push-button. combines the proven, reliable locking of the hinge bolt with an additional push function which makes it easier to work in very confined and inaccessible areas the adjustment directly on the workpiece is possible by simply sliding the pliers handle reliable locking of the hinge bolt with the first workload. The gripping width of the pliers is then fixed and can only be adjusted by pressing the button to re-activate the sliding function, the hinge bolt must be released by pressing the push button and the pliers must be completely opened again Chrome vanadium electric steel, forged, oil-hardened 87 22 250 with slim two-colour multi-component sleeves without collar for better handling and easier transport ress the button open pliers completely osition jaw simply slide and close pliers Adjustment positions Ø Inch Ø 87 21 250 072775 25 2 50 46 250 Hinge bolt locks itself with the first workload 87 22 250 077794 25 2 50 46 250 KNIPEX Minis in belt pouch KNIPEX Minis as little helpers in the practical belt pouch made of hard-wearing polyester fabric with hook and loop fastener with elastic side holder for small ash lamp, pen or suchlike with practical belt loop Alligator - Set Cobra - Set 00 20 09 V03 074809 Content 88 01 180 88 01 250 88 01 300 00 20 09 V02 074793 Content 87 01 180 87 01 250 87 01 300 00 20 72 V02 00 20 72 V01 Bestseller- Set 2 00 20 72 V01 070832 00 20 72 V02 075851 Content 86 03 150 Mini pliers wrench 87 01 125 Cobra Water Pump Pliers 74 01 160 High Leverage Diagonal Cutter 87 01 150 Cobra Water Pump Pliers 00 20 09 V01 073994 Content 03 02 180 Combination Pliers 70 02 160 Diagonal Cutter 87 01 250 Cobra Water Pump Pliers

Cobra Hightech Water Pump Pliers push the button for adjustment on the workpiece fine adjustment for optimum adaptation to different sizes of workpieces and a comfortable handle width self-locking on pipes and nuts: no slipping on the workpiece and low handforce required gripping surfaces with special hardened teeth, teeth hardness approx. 61 HRC: high wear resistance and stable gripping box-joint design: high stability due to double guide reliable catching of the hinge bolt: no unintentional shifting guard prevents operators fingers being pinched Chrome vanadium electric steel, forged, oil-hardened Cobra Cobra XL (87 01 400): greater gripping capacity but much lower weight than comparable pipe wrenches. Large gripping capacity of 95, would require a 3-inch pipe wrench. 87 01 250 87 01 300 87 01 125 87 01 150 87 01 180 87 01 400 87 01 560 Adjustment positions Ø Inch 87 01 125 069935 13 1 27 125 87 01 150 060116 11 1 1/4 30 150 87 01 180 022015 18 1 1/2 36 180 87 01 250 022022 25 2 46 250 87 01 300 034087 30 2 3/4 60 300 87 01 400 005636 27 3 1/2 95 400 87 01 560 044321 20 4 1/2 120 560 Cobra ES Water Pump Pliers extra-slim particularly good access to the workpiece due to very slim construction of head and joint area ideal for service, maintenance and equipment repair, in automotive and general industry long, narrow jaws Adjustment positions Ø Inch Ø 87 51 250 061267 19 1 1/4 32 34 250 3

SmartGrip Water Pump Pliers with automatic adjustment ideal for frequent changeovers to workpieces of different sizes automatic adjustment per one-hand operation both for right-handed and left-handed use good access to the workpiece thanks to the slim dimensions of head and joint area and flush joint bolt durchgestecktes Gelenk: hohe Stabilität durch doppelte Führung locking lever for space saving transport with reliable closed handles Chrome vanadium electric steel, forged, oil-hardened Ø Inch Ø 85 01 250 061304 1 1/4 32 36 250 Raptor Pliers replaces a set of wrenches, ideal for tightening locknuts zero-backlash gripping of metric or imperial hexagonal headed screws, no rounding of bolt heads for metric and imperial nuts and screws with widths across ats from 10 to 32 (3/8" up to 1 1/4"); self-locking from 17 : no slipping on the workpiece reliable and tight gripping of rounded, rusty, or thick coated bolts and screws Adjustment positions Inch 87 41 250 054566 15 3/8-1 1/4 10-32 250 4

Alligator Water Pump Pliers more output and comfort compared to conventional water pump pliers of the same length: 9-notch adjustment positioning for 30 % more gripping capacity self-locking on pipes and nuts: no slipping on the workpiece and low handforce required robust construction, insensitive to dirt; particularly suitable for outdoor work Chrome vanadium electric steel, forged, oil-hardened Adjustment positions Ø Inch Ø 88 01 180 035480 9 1 1/2 42 36 180 88 01 250 022992 9 2 50 46 250 88 01 300 034094 9 2 3/4 70 60 300 Alligator XL The classic model, now also in 400 length 11-notch adjustment positioning with a gripping capacity up to 3 1/2", optimised adjustment to the workpiece and user-friendly handle position robust construction, insensitive to dirt; particularly suitable for outdoor work good access to the workpiece due to slim size of head and joint area self-locking on pipes and nuts: no slipping on the workpiece and low handforce required gripping surfaces with special hardened teeth, teeth hardness approx. 61 HRC: high wear resistance and stable gripping box-joint design: high stability due to double guide guard prevents operators fingers being pinched Chrome vanadium electric steel, forged, oil-hardened The KNIPEX Alligator XL offers the performance and comfort of a water pump pliers while being 50 % lighter in weight and having a greater gripping capacity (3 ½") than comparable pipe wrenches. With their handy length of 400, there is a place for KNIPEX Alligator XL in every tool box. Adjustment positions Ø Inch Ø 88 01 400 075844 11 3 1/2 90 95 400 5Alligator 5

Pipe Wrenches S-Type with rapid adjustment time-saving, precise adjustment of the gripping width directly on the workpiece at the push of a button less effort required due to self-locking action no unintentional shifting s handles guard prevents operators fingers being pinched maximum load capacity thanks to completely hardened handles high wear resistance due to the additionally hardened teeth Chrome vanadium electric steel, forged, oil-hardened 83 60 010 Clamping width Ø Inch Ø Ø Inch 83 60 010 075424 1 5/8 42 1 42 330 83 61 010 83 60 015 075677 2 3/8 60 1 1/2 60 420 83 61 010 077602 1 5/8 42 1 42 330 83 61 015 077619 2 3/8 60 1 1/2 60 420 Pipe Gripping Pliers for tube ttings and connectors ideal for tightening and releasing plastic pipe ttings, round union nuts, etc. starting from 25 dia. with knurled gripping jaws; up to 65 dia. 4-position adjustable slip joint 81 13 230 with plastic jaws for careful installation up to 60 dia. 81 13 230 Ø 81 03 230 018957 25-65 230 81 13 230 050117 25-60 230 Pipe Wrenches S-Type slim, S-type jaw jaws with offset teeth in opposite direction teeth additionally induction hardened three-point contact on pipes, self-locking Pipe Wrenches 90 Swedish pattern 90 angled jaws jaws with offset teeth in opposite direction teeth additionally induction hardened I-beam handle design 83 30 015 83 10 015 Ø Inch Ø Ø Inch Clamping width 83 30 010 014249 1 5/8 42 1 42 320 83 30 015 014256 2 3/8 60 1 1/2 60 420 83 30 020 014263 2 3/4 70 2 70 540 Ø Inch Ø Ø Inch Clamping width 83 10 010 014188 1 5/8 42 1 42 310 83 10 015 014195 2 3/8 60 1 1/2 60 420 83 10 020 014201 2 3/4 70 2 70 560 6

Combination Pliers with gripping zones for at and round material, suitable for versatile use with cutting edges for soft and hard wire long cutting edges for thicker cables cutting edges additionally induction hardened, cutting edge hardness approx. 60 HRC Special tool steel, forged, oil-hardened Ø Ø Ø ² 03 02 160 023203 3.1 2.0 10.0 16.0 160 03 02 180 03 02 180 023197 3.4 2.2 12.0 16.0 180 03 02 200 034940 3.8 2.5 13.0 16.0 200 03 06 200 033776 3.8 2.5 13.0 16.0 200 High Leverage Combination Pliers 02 02 180 35 % less effort required than with conventional combination pliers easier work due to optimised leverage with cutting edges (hardness approx. 63 HRC) for heavy duty long cutting edges for thicker cables with gripping zones for at and round material, suitable for versatile use High-grade special tool steel, forged, oil-hardened Ø Ø Ø ² 02 02 180 034896 2.5 2.0 11.5 16 180 02 06 200 02 02 200 034902 2.8 2.2 13.0 25 200 02 02 225 043379 3.0 2.5 14.0 25 226 02 06 200 010029 2.8 2.2 13.0 25 200 26 15 200 26 16 200 26 25 200 26 26 200 Snipe Nose Side Cutting Pliers (Stork Beak Pliers) Elastic tips: dimensionally stable even when twisted distortion-tolerant, elastic precision tips half-round, long, pointed jaws with cutting edges (hardness approx. 61 HRC) for soft, medium-hard and hard wire Vanadium electric steel; forged, oil-hardened Ø Ø 26 15 200 035022 3.2 2.2 200 26 16 200 022831 3.2 2.2 200 26 25 200 035039 40 3.2 2.2 200 26 26 200 022855 40 3.2 2.2 200 soft wire medium hard wire hard wire piano wire Cu + Al multi-conductor cable, solid and multi-stranded wire rope 7

Diagonal Cutters the indispensable diagonal cutter for all-round use high quality material and precise workmanship for long service life precision cutting edges additionally induction hardened, (cutting edge hardness approx. 62 HRC) for soft and hard wire clean cutting of thin copper wires, also at the cutting-edge tips narrow head style for use in confined areas Vanadium electric steel; forged, oil-hardened 70 02 160 Ø Ø Ø 70 02 125 034025 3.0 2.3 1.5 125 70 02 140 023098 4.0 2.5 1.8 140 70 02 160 034032 4.0 2.8 2.0 160 70 06 160 70 02 180 034049 4.0 3.0 2.5 180 70 06 160 021995 4.0 2.8 2.0 160 X-Cut Compact Diagonal Cutters Compact and 25 % less weight. Powerful and precise. Cuts finest strands as well as multi-core cables and piano wires. box-joint design: highest stability with low weight doubly supported joint axis for heaviest duty high cutting capacity with very little effort thanks to the optimum coordination of cutting-edge angle and leverage ratio large opening width for thicker cables cuts precisely, even through fine copper wires compact, low-weight constructione Chrome vanadium heavy-duty steel, forged, oil-hardened 40 % less effort required compared to standard diagonal cutters of the same length 73 02 160 73 05 160 73 06 160 Ø Ø Ø Ø Ø 73 02 160 075127 4.8 3.8 2.7 2.2 12 160 73 05 160 075134 4.8 3.8 2.7 2.2 12 160 73 06 160 075141 4.8 3.8 2.7 2.2 12 160 8 soft wire medium hard wire hard wire piano wire Cu + Al multi-conductor cable, solid and multi-stranded wire rope

High Leverage Diagonal Cutters for very tough, continuous use high cutting performance with minimum effort due to optimum co-ordination of the cutting edge angle and transmission ratio precision cutting edges additionally induction hardened (cutting edge hardness approx. 64 HRC), for all sorts of wire including piano wire 74 02 180 74 06 200 Ø Ø Ø 74 02 160 023081 3.4 2.5 2.0 160 74 02 180 023074 3.8 2.7 2.2 180 74 02 200 040309 4.2 3.0 2.5 200 74 02 250 042402 4.6 3.5 3.0 250 74 06 200 033820 4.2 3.0 2.5 200 TwinForce High Performance Diagonal Cutters The superior High-Leverage Diagonal Cutter with patented double joint ideal transmission of force due to double-hinged design reliably cuts all types of wire, including steel tape for rough or very fine cutting low cutting impact: gentle on hands. The tension on muscles and tendons is relieved for comfortable cutting, repetitive cutting or extremely hard cutting jobs high degree of stability and zero-backlash due to precisely milled forged-in axles Chrome vanadium heavy-duty steel, forged, oil-hardened 73 72 180 F: with opening spring to spimplify reapplication and for repetitive cutting 73 71 180 Ø Ø Ø Ø 73 71 180 074762 5.5 4.6 3.2 3.0 180 73 72 180 074779 5.5 4.6 3.2 3.0 180 73 72 180 F 077657 5.5 4.6 3.2 3.0 180 Extremely easy cutting with little strain: cuts again 50 % easier than the tried and tested KNIPEX high leverage diagonal cutters 9

CoBolt Compact Bolt Cutters Improved cutting performance Micro-structured cutting edge allows easy cutting of large cross-sections With gripping surface below the joint for gripping and pulling wires with a diameter as from 1.0 precision cutting edges for soft and hard wire as well as piano wire cuts bolts, nails, rivets, etc. up to 5.2 dia. most ef cient joint design ensures exceptional cutting performance cutting edges additionally induction hardened, cutting edge hardness approx. 64 HRC Chrome vanadium heavy-duty steel, forged, oil-hardened 71 12 / 22 / 32 200 opening spring and locking device are integrated in the handles also for comfortable work and protected transport 71 22 200 20 angled head with single-sided joint bar and diagonal cutting edge for ush cutting; with space for gripping 71 32 200 the recess in the blade allows easier cutting of thicker wires, e. g. for anchor bolts in false ceilings 71 41 200 the recess in the blade allows easier cutting of thicker wires, e. g. for anchor bolts in false ceilings 20 angled head with single-sided joint bar and diagonal cutting edge for flush cutting; with space for gripping 71 01 200 20 71 22 200 Ø Ø Ø Ø 71 01 200 033165 6.0 5.2 4.0 3.6 200 71 02 200 047056 6.0 5.2 4.0 3.6 200 71 12 200 066859 6.0 5.2 4.0 3.6 200 71 22 200 066873 20 6.0 5.2 4.0 3.6 200 71 32 200 066880 6.0 5.2 4.0 3.6 200 71 01 / 02 / 12 200 micro-structured cutting edge 71 41 200 066897 20 6.0 5.2 4.0 3.6 200 71 01 / 02 / 12 and 71 32 200 gripping surface below the joint 71 32 200 10 soft wire medium hard wire hard wire piano wire Cu + Al multi-conductor cable, solid and multi-stranded wire rope

Electricians Pliers the ideal pliers for cable work for gripping and bending wire for cutting soft, medium and hard wire precision cutting edges additionally induction hardened, cutting edge hardness approx. 60 HRC with precision stripping holes for crimping end sleeves (ferrules) Vanadium electric steel; forged, oil-hardene Stripping capacities 2 Ø Ø 13 01 160 034971 0.5-0.75 / 1.5 / 2.5 2.5 1.6 160 13 02 160 010470 0.5-0.75 / 1.5 / 2.5 2.5 1.6 160 Self-Adjusting Insulation Strippers for single, multiple and ne stranded conductors with plastic or rubber insulation cutting depth can be adjusted for different insulation materials stripping blades and clamping jaws easily replaceable Mode of operation of straight cutters An incision is made in the red area only. ² Stripping capacities AWG 12 40 200 026662 0.03-10 32-7 200 Not suitable for highly- exible or armoured insulation materials or for multi-layered insulation. MultiStrip 10 Automatic Insulation Stripper Improved knife geometry robust and more durable Optimised handle design with more comfort Recessed wire cutter fully automatic adjustment to all single-, multi- and ne-stranded conductors with PVC insulation and a number of special insulations throughout the entire capacity range of 0.03 to 10 ² no manual ne adjustment required, no damage to the conductors the clamping jaws made of steel hold the cable in a way that prevents slipping without damaging the remaining insulation ² Stripping capacities AWG 12 42 195 054580 0.03-10 32-7 195 11

KNIPEX MultiCrimp Now also for insulated and non-insulated end sleeves (ferrules) 10 / 16 / 25 ² Universal indent crimping die for non-insulated connectors Crimping pliers with round magazine and five interchangeable dies just one tool for the most coon crimping applications crimping dies changed quickly and easily without any additional tool sorted and protected storage of the interchangeable dies in a round magazine comfortable, powerful crimping pliers in professional quality same reliable crimping results as with fixed crimping dies repetitive, high crimping quality due to precision dies and integral lock (self-releasing mechanism) 97 33 02 Capacity Applications ² AWG 97 33 02 066934 KNIPEX MultiCrimp 250 non-insulated open plug type connectors (plug width 4.8 + 6.3 ) insulated terminals, plug connectors + butt connectors insulated and non-insulated end sleeves (ferrules) 0.5-1 1.5-2.5 4-6 0.5-1 1.5-2.5 4-6 0.25-0.75 1-1.5 2.5 4 6 20-10 20-10 23-10 insulated and non-insulated end sleeves (ferrules) 10 / 16 / 25 7 / 5 / 3 non-insulated crimp terminals, tube and compression cable lugs in accordance with DIN 46234 and DIN 46235 and non-insulated crimp, butt and press connectors in accordance with DIN 46341 and DIN 46267 0.5-1 1.5-2.5 4-6 10 20-7 Crimping Pliers for end sleeves (ferrules) Now also as VDE version Improved leverage for easier crimping More light and slim design for crimping end sleeves (ferrules) according DIN 46228 parts 1 + 4 from 0.25 to 16 ² crimping in marked half-round dies for reliable connections between the sleeve and the conductor 9 particularly deep dies with conical side faces Universal Dismantling Tools for dismantling and stripping all coon round and damp-proof installation cables between 8.0-13.0 dia. (e.g. 3 x 1.5 ² up to 5 x 2.5 ²) also for use in conduit and distribution boxes 16 85 125 SB: with additional blade for longitudinal cuts telescopic blade inside 16 80 125 SB 16 85 125 SB 16 90 130 SB 12 Capacity ² AWG Number of crimping positions 97 71 180 040668 0.25-16 23-5 9 180 97 78 180 072003 0.25-16 23-5 9 180 Stripping capacities Ø Types of cables 16 80 125 SB 040828 8.0-13.0 round cable Ø 8-13 125 16 85 125 SB 060444 8.0-13.0 round cable Ø 8-13 125 16 90 130 SB 076940 8.0-13.0 round cable Ø 8-13 130

Pipe Cutter for plastic conduit pipes for clean cutting of plastic pipes (e.g. plastic conduit pipes) with 6-35 dia. not suitable for cutting cables blade is replaceable and can be retracted from any position low force requirement due to special blade geometry and optimum transmission minimum operator fatigue due to ergonomic handle design and incremental ratchet blade feed Notching Pliers special pliers for notching recesses into plastic ledges and plastic casings for electric and sanitary installation notches can be enlarged by initial and nal cut clean cut edges - no triing activities needed easy handling with opening spring, opening limiter and locking lever pliers body: special tool steel, rolled, oil-hardened Cutting capacities Cutting edge length Ø 94 10 185 047025 6-35 35 185 Capacity 90 61 16 051947 16 x 32 250 Pipe Cutter for plastic conduit pipes and hoses for cutting thin walled plastic pipes (conduit plastic pipes) and exible hoses, also with fabric reinforcement, of plastic and rubber up to 25 dia. / 1" exterior dia. not suitable for cutting cables with opening spring and locking device Cutting capacities Ø 90 20 185 067122 25 185 Pipe Cutter for composite pipes and protective tubes for cutting composite pipes with diameters from 12.0 to 25.0 and for cutting exible protective tubes with a diameter of 18.0-35.0 without damaging a potentially pipe inside a calibration arbor can be tted, for example for Geberit composite pipes with 11.5 and 15.0 dia. Pipe Cutter for composite and plastic pipes for cutting thick walled plastic and composite pipes with diameters from 26.0 to 40.0 cuts pipes using the ratchet principle in several strokes self-adapting pipe support positions pipes of various diameters correctly for a rectangular cut Cutting capacities Cutting capacities Composite pipes Ø Protective tubes Ø 90 25 20 046004 12-25 18-35 210 Cutting capacities Ø 90 25 40 045182 26-40 210 13

Pliers for Electrical Installation The all-rounder for professionals Multifunctional pliers for the electrical installation; to grip flat and round material, for bending, deburring, cutting cable, stripping and crimping end sleeves (ferrules) 6 functions in one pair of pliers smooth surfaces near the tips grip single cores without damaging them serrated gripping surfaces and pipe grip for gripping flat and round material clear-cut outside edge on the jaw for working on flush-mounted junction boxes and deburring feed-through holes stripping holes for conductors of 0.75-1.5 ² and 2.5 ² crimp die for wire-end ferrules 0.5-2.5 ² cable shears with (induction-hardened) precision cutting edges for copper and aluminium cables up to 5 x 2.5 ² / dia. 15 slim dimensions for easy access bolted joint: precise, zero backlash operation of pliers High-grade special tool steel, forged, oil-hardened Electricians Shears Precisely ground blades with ne serration for a clean, non-slip cut Cutting edge with integrated cable cutter With plastic belt case universal shears for electricians handles with mulit-component grips, breglass-reinforced cutting edges made from stainless steel, hardness of cutting edges 56 HRC 13 91 200 / 13 92 200 / 13 96 200 the intelligent latching mechanism enables you to grip without opening the pliers. The cutting edge remians closed and protected. 13 92 200 13 86 200 95 05 155 SB 077725 160 Cutting capacity Handles Ø ² 13 81 200 075240 plastic coated 15 50 200 13 82 200 075080 with multi-component grips 15 50 200 13 86 200 075097 insulated with multi-component grips, VDE-tested 15 50 200 13 91 200 075257 plastic coated 15 50 200 13 92 200 075103 with multi-component grips 15 50 200 13 96 200 075110 insulated with multi-component grips, VDE-tested 15 50 200 14 soft wire medium hard wire hard wire piano wire Cu + Al multi-conductor cable, solid and multi-stranded wire rope

Combination Shears for cutting cardboard, plastics, aluminium, brass and copper foils precision ground, hardened blades with opening spring and locking device not suitable for steel wire or iron sheets shears body: surgical steel, stainless, vaccum-hardened handles: plastic, impact-proof 95 05 190 019602 190 Tool Bag empty compact tool case for the service technician perfectly fits in the KNIPEX Big Twin 00 21 40 LE / 00 21 41 LE and other standard tool cases with 8 tool pouches and 7 tool straps slip-through back strap to attach to a trolley made from tough polyester fabric, with zip fastener Cable Shears clean and smooth cut without crushing and deformation for cutting copper and aluminium single conductors as well as multiple stranded cables easy cutting with one-hand operation not suitable for steel wire and hard drawn copper conductors High-grade special tool steel, forged, oil-hardened 95 12 165 95 16 165 Dimension exterior Dimension exterior Dimension exterior width height depth 00 21 11 LE 077718 410 60 290 Ø ² AWG 95 12 165 029182 15 50 1/0 165 95 16 165 039648 15 50 1/0 165 Concreters Nippers to twist and cut wire in one operation: fast, reliable and economical unobtained precision and long service life make these the most widely purchased concreters nippers in the world High-grade special tool steel, forged, oil-hardened Ø Ø 99 00 250 013280 2.4 1.6 250 15

TwinKey 10 profiles. 2 crosses. 1 key. All established locking systems. For all standard cabinets and shut-off systems multifunctional key for the actuation of locking systems from the areas of facilities engineering (heating and sanitation, air conditioning, electro technology), gas and water supply and shut-off-systems 8-arm version: two 4-way spider keys connected in a space-saving way using magnets reversible bit: 1.0 x 7 slot and PH 2 cross slot key and reversible bit joined by stable stainless steel wire weight-optimised zinc die-cast design Ø 00 11 01 074670 5 / 6-7 / 8-9 / 10-11 7-8 / 9-10 / 11-12 3-5 6 6-9 95 KNIPEX-Werk C. Gustav Putsch KG Oberkamper Strasse 13 42349 Wuppertal Germany Tel. 49 (0) 202 47 94-0 49 (0) 202 47 74 94 info@knipex.de www.knipex.de PT. Bumi Bangun Perkasa Head Office Golden Road C 28 No. 10 ITC BSD City - Tangerang Selatan INDONESIA - 15310 Phone 1 : +62-21-5315 3038 Phone 2 : +62-21-5315 2793 Fax : +62-21- 537 0272 guntur@bumibangun.com marketing@bumibangun.com Hotline : 081219099889 Guntur. Branch Office Borneo Paradiso Blok A No. 7 Balikpapan - East Borneo INDONESIA - 76115 Phone 1 : 0542-7571079 Phone 2 : 0542-7571080 Fax : 0542-7571081 bumibangun@gmail.com service_karcher@bumibangun.com Hotline:0811882177 Firmansyah L100 02739/01/10.14/PDF/EN KNIPEX Quality Made in Germany