Product Description The SOEPB-4312-20D EPON OLT module has been designed for low cost point-to-multi point (P2MP) Fiber to the Home, Business or Curb (FTTX) systems employing high-speed burst mode TDM receivers/transmitters in 1250Mb/s downstream/upstream duplex symmetrical data links. The device is based on the IEEE 802.3ah 10BASE PX-20 specification for bidirectional communications over a single fiber and incorporates a high performance 1310nm burst mode APD Receiver and 1490nm CW mode DFB transmitter. The Receiver Loss of Signal (Rx_LOS), Transmit Disable (Tx_DIS), Transmit Fault (Tx_FAULT) and the SFF-8472 I 2 C diagnostic interface monitor and control functions are compatible. The industry standard 2x10 small form pluggable (SFP) package incorporates the SC/UPC receptacle. It is fabricated with a rugged die cast metal housing and cage assembly and is offered in the industrial case temperature range of -40 to 85. It is IEC 60825-1 Class I laser safety compliant and meets the EEC Directive 22/95/EC for RoHS compliance. Applications Gigabit Ethernet Access Networks Fiber to the Home, Curb, Office (FTTx) Point to Multi Point Service (P2MP) Features Dual Wavelength Bidirectional Tx/Rx Case Operating Temperature: Terminated @ SERDES 1250Mb/s Downstream Commercial: 0 C to 70 C Rx_LOS 1250Mb/s Upstream 1310nm APD/TIA Burst Mode Rx Industrial: -40 C to 85 C 1490nm CW Mode Tx RSSI Trigger 8472 DDMI Interface 1490nm CW Mode DFB Tx DFB Laser I 2 C Serial Data IEEE 802.3ah Compliant Differential LVPECL I 2 C Serial Clock Single 3.3V DC supply AC Coupled Applied Standards Low Power Consumption Terminated Inside the Transceiver IEEE 802.3ah Single Fiber, Full Duplex Operation Tx_DIS SFF-8472 Rev 9.5 Burst mode RSSI output Tx_FAULT SFP Package SC/UPC Optical Receptacle Bail Latching Mechanism 2x10 Electrical Interface 1310nm Burst Mode Rx APD/TIA BER <10-12 (PRBS = 2 7-1) LVPECL Differential DC Coupled Page 1
Ordering Information Part Number Latch Type (X) Temperature Option (Y) RoHS Compliance (Z) SOEPB-4312-20D B Bail C 0 to 70 ºC H -40 to 85 ºC + RoHS Compliance Absolute Maximum Ratings Parameter Symbol Min Max Units Notes Storage Ambient Temperature T stg -40 +85 ºC Exceeding the Absolute Maximum Ratings may Relative Humidity - Storage RH S 0 95 % cause irreversible damage to the device. The Relative Humidity - Operating RH O 0 85 % device is not intended to be operated under the condition of simultaneous Absolute Maximum Module Supply Voltage V CC 0 3.6 V Ratings, a condition which may cause irreversible damage to the device. Absolute Maximum Ratings: Optical and Electrical Signal Levels Parameter Symbol Min Max Units Notes TX_DISABLE Logic HIGH State Tx_DIS 0 V CC +0.5 V Rx_LOS Logic HIGH State Rx_LOS 0 V CC +0.5 V Recommended Operating Conditions Parameter Symbol Min Typ Max Units Notes Case Operating Temperature T case 0 25 +70 ºC -40 25 +85 ºC Temperature Range = C Temperature Range = H Module Supply Voltage V CC 3.135 3.3 3.465 V Module Supply Current I IN - 270 5 ma Upstream Signaling Speed S U - 1250 - Mb/s Downstream Signaling Speed S D - 1250 - Mb/s Page 2
Transmitter Electrical Specifications Parameter Symbol Min Typ Max Units Notes Tx_Data Differential Input Voltage V IH- V IL 2-16 mv Tx_DIS = HIGH (Transmitter OFF / DISABLED) V OH 2.0-3.3 V Tx_DIS = LOW (Transmitter ON / ENABLED) V OL 0-0.8 V Receiver Electrical Specifications Rx Data Differential Output Voltage V IH- V IL 4-16 mv Rx_LOS = LOW (Receiver ON / NORMAL) V OL 0-0.4 V Rx_LOS = HIGH (Receiver OFF / LOSS OF SIGNAL) V OH 2.4-3.3 V Rx_TRI = HIGH (Trigger ON) V IH 2.0-3.3 V Rx_TRI = LOW (Trigger OFF / NORMAL) V IL 0-0.8 V Transmitter Optical Specifications Parameter Symbol Min Typ Max Units Conditions / Notes Transmitter Type 1490nm DFB CW Mode Average Launch Power (9/125 SMF) P OUT 2.5-7.0 dbm Average Launch Power with Tx OFF P OFF - - -39 dbm Optical Rise and Fall Time Tr / t f - - 250 ps 20% to 80% Optical Center Wavelength 1480 1490 15 nm Spectral Line Width @ -20dB - - 1.0 nm Side Mode Suppression Mode SMSR 30 - - db Extinction Ratio ER 9.0 - - db Relative Intensity Noise RIN - - -118 db/hz Optical Return Loss tolerance RL - - 15 db Peak to Peak Jitter J P-P - - 0.2 UI Transmit Reflectance RFL - - -12 db Page 3
Receiver Optical Specifications Parameter Symbol Min Typ Max Units Conditions / Notes Receiver Type 1310nm APD/TIA Burst Mode Optical Center Wavelength 1260 1310 1360 nm Receiver Sensitivity P IN - - -30 dbm BER<10-12, 1250 Mb/s, PRBS 2 7-1 Receiver Optical Overload Pin(SAT) -6 - - dbm ER=10dB Maximum Input Optical Power Pin(MAX) - - 4 dbm Damage Threshold Receiver Reflectance RFL - - -12 db Receiver Settling Time Trx - - 4 ns Rx_LOS Assert P a -45 - - dbm Rx_LOS Deassert P d - - -33 dbm Rx_LOS Hysteresis P hy 0.5-5 db Digital RSSI Sample & Hold Timing Characteristics Parameter Symbol Min Typ Max Units Conditions / Notes Optical Signal Length T Opt 1184 12 - ns Upstream grant slots RSSI Trigger Delay T d 496 512 528 ns Must during the upstream grant slots RSSI Trigger Signal Width T w 584 6 616 ns I 2 C prohibited time T I2C - - 5 μs Receiver Power Monitor Range M r -30 - -8 dbm Receiver Power DDM (RSSI) Accuracy Rx DDM - +/-1 +/-2 db Room Temperature - - +/-3 db Industrial Temperature Optical Input Signal T opt Rx Output Signal RSSI Trigger Delay T d T w Next RSSI Trigger RSSI Trigger Signal From Host T I2C I 2 C Sample Period Digital RSSI S/H I 2 C RSSI Sample Period I 2 C RSSI Hold Period Page 4
EEPROM serial ID memory contents (A0h) Address Size(Bytes) Name of Field Description 0 1 Identifier 1 1 Ext. Identifier SFP-EPON 2 1 Connector SC 3-10 8 Transceiver 10BASE PX 11 1 Encoding 8B10B 12 1 BR, Nominal 1250Mb/s 13 1 Reserved 14 1 Length(9μm)-km 20(units = km) 15 1 Length (9μm)-1m 2(units = 1m) 16 1 Length (50μm)-10m MMF Not Supported 17 1 Length (62.5μm)-10m MMF Not Supported 18 1 Length (Copper) Copper Not Supported 19 1 Reserved 20-35 16 Vendor name SINOVO 36 1 Reserved 37-39 3 Vendor OUI 40-55 16 Vendor PN The Part Number in the Ordering Information 56-59 4 Vendor Rev No. 60-61 2 Wavelength 1490nm Laser Wavelength 62 1 Reserved 63 1 CC_BASE Check sum of bytes 0-62 64-65 2 Transceiver Options Rx_LOS,Tx_FAULT and Tx_DISABLE 66 1 BR, max 67 1 BR, min 68-83 16 Vendor SN 84-91 8 Date code Year, Month, Day 92 1 Diagnostic Monitoring Type Compliant with SFF-8472 V9.5 Externally Calibrated Received power measurement type-average Power 93 1 Enhanced Options Optional Alarm/warning implemented Soft Tx_DISABLE,Tx_FAULT implemented 94 1 SFF-8472 Compliance SFF-8472 V9.5 95 1 CC_EXT Check sum of bytes 64-94 96-127 32 Vendor Specific Vendor Specific 128-255 128 Vendor Specific Vendor Specific Values (HEX) 03 04 01 80 01 0D 14 C8 ASCII Format ASCII Format 05 D2 1A 58 E0 02 Page 5
DDMI A2 (HEX) Address Table for Alarm and Warning Data DDMI Parameter Alarm Threshold Data Warning Threshold Data Measured Values Address + Position Address + Position Alarm Bit (Set) Warning Bit (Set) High Value Low Value High Value Low Value MSB LSB MSB LSB MSB LSB MSB LSB MSB LSB High Low High Low Temperature 01 02 03 04 05 06 07 96 97 112 (7) 112 (6) 116 (7) 116 (6) Vcc 08 09 10 11 12 13 14 15 98 99 112 (5) 112 (4) 116 (5) 116 (4) Tx Bias 16 17 18 19 20 21 22 23 1 101 112 (3) 112 (2) 116 (3) 116 (2) Tx Power 24 25 26 27 28 29 30 31 102 103 112 (1) 112 (0) 116 (1) 116 (0) Rx Power 32 33 34 35 36 37 38 39 104 105 Reserved 113(7) Reserved 113(6) Reserved 117(7) Reserved 117(6) Page 6
Pin Assignment TOP VIEW OF BOARD Pin 20 Pin 11 BOTTOM VIEW OF BOARD Pin 10 Pin 1 SFP Pin Assignment Pin Symbol Description Notes 1 V EET Transmitter Ground 2 Tx_FAULT Transmitter Fault, LOW = Normal Operation, HIGH = Fault Indication 3 Tx_DIS Transmit Disable, LOW = Normal Operation, HIGH = Disables Module 4 MOD_DEF 2 Module Definition 2 - Two-Wire Interface - Serial Data Note 1 5 MOD_DEF 1 Module Definition 1 - Two-Wire Interface - Clock Signal Note 1 6 MOD_DEF 0 Module Definition 0 - Presence Pin, Internal Connected to Digital Ground Note 1 7 RSSI_TRI RSSI Trigger Input 8 Rx_LOS Receiver Loss of Signal, LOW = Normal Operation, HIGH = Loss of Signal 9 V EER Receiver Ground 10 V EER Receiver Ground 11 V EER Receiver Ground 12 RD- Rx_Data Output (Inverted) Note 2 13 RD+ Rx_Data Output (Non Inverted) Note 2 14 V EER Receiver Ground 15 V CCR Receiver DC Power 3.3 V +/- 5% 16 V CCT Transmitter DC Power 3.3 V +/- 5% 17 V EET Transmitter Ground 18 TD+ Tx_Data Input (Non Inverted) Note 3 19 TD- Tx_Data Input (Inverted) Note 3 20 V EET Transmitter Ground Notes 1. Requires a pull up resistor of 4.7k to 10k Ohms 2. The 1 Ohm differential Rx Data output is internally DC coupled. 3. The 1 Ohm differential Tx Data input is internally AC coupled and terminated. Page 7
Electrical Interface +3.3V 1μH V CCT(16) 10μF 0. 1μF 10μF 0.1μF V EET(1,17, 20) 1μH 10μF 0.1μF V CCR(15) V EER (9,10, 11,14) +3.3V +3.3V 10KΩ 4. 7KΩ LTE4302M Tx_DIS Tx_ DIS(3) Tx_ FAULT Tx_ FAULT(2) TD+ TD- Z=50Ω Z=50 Ω TD+(18) TD-(19) 1Ω CM Driver PON MAC SerDes IC RD+ RD- +3.3 V 2x130Ω 2x82Ω 2x150Ω Z=50 Ω Z=50 Ω RD+(13) RD-(12) +3.3V 4. 7KΩ BM Receiver Rx_LOS +3.3V Rx_ LOS(8) 3X 4.7K to 10 KΩ MOD_DEF 0(6) CPU MOD_DEF 2(4) MOD_ DEF 1(5) MCU TRIGGER RSSI_TRI(7) 10 KΩ Page 8
8.5 2 6.4 14.0 9.2 13.4 7.6 SOEPB-4312-20D Mechanical Dimensions 41.8±0.15 +0.3 0 BOTTOM VIEW 2.5 65.5±0.2 47.5 SIDE VIEW 2.25 1.0 2 MAX MAX Dimensions are mm Tolerance +/-0.1mm Warnings Handling Precautions: This device is susceptible to damage as a result of electrostatic discharge (ESD). A static free environment is highly recommended. Follow guidelines according to proper ESD procedures. Laser Safety: Radiation emitted by laser devices can be dangerous to human eyes. Avoid eye exposure to direct or indirect radiation. Contact Shenzhen Sinovo Telecom Co. Ltd Website: Email:sales@sinovocorp.com Tel:+86(0)0755-3295 9919 Fax:+86(0)755 3295 9918 Factory ADD: 5/F Chuang Park,Taoyuan Street,Baoan District,Shenzhen,China 5180 Head Quarter:11/F,Taibang Technology Building,Gaoxin South 4th,Science and Technology Park South,Nanshan,Shenzhen,China 518040 Page 9