Shelving & Signage Systems

GRIPLOCK SYSTEMS Shelving & Signage Systems

The Art of Suspension CONTENTS PAGES Display Systems...1-6 Components....7-14 Index & Technical Data...1-19 SHELVING SYSTEMS Ceiling to Floor Ceiling to Wall The Griplock Display System offers a simple, highly versatile selection of ceiling to floor and wall-mounted components for most shelving and display materials, including glass, acrylic, metal, wood, foamcore and other media. The stainless steel cables are virtually invisible to the eye and the connecting hardware is elegant and minimal, enabling the designer to create display systems that appear to float in mid-air. This emphasizes the products on display rather than the shelving itself, and lends a sharp, ultra-modern ambiance to any retail environment. We ve designed this attractive and affordable collection to handle a multitude of shelving and display applications, and to keep pace with the imagination of the modern retail space designer. SIGNS & BANNERS Ceiling to Floor Ceiling Suspended Wall Mounted Stand Offs Wall to Wall There is no faster, neater or more economical way to hang and change banners and store signs than with aircraft cable. Our grippers, couplers, cables and connectors are designed to work with most signage applications, and can be used over and over again. The Griplock Display System: Elegant, Flexible and Incredibly Strong.

Display Systems 1

Displays/Shelving & Signage TRACK MOUNTED DISPLAY Ideal for installations where flexibility of shelving and promotional material is key. Displays can be rearranged by simply moving the cable horizontally along the tracks. Tracks can be inset into the floor and ceiling for a cleaner look. Visit our website or contact us for more information. 8 6 6 6 6 6 6 6 6 1 1 1 1 4 4 10 10 9 9 9 9 9 9 9 9 7 7 7 7 7 7 7 7 8 8 1 Guide Clamp - Large / DG-GC-SAT pg. 10 Swiveling Side Clamp Gripper / DG--SCU-SAT pg. 10 Swiveling Side Mount Gripper / DG--SMU-SAT pg. 1 4 Swiveling Double Side Mount Gripper / DG--SMUX-SAT pg. 1 Rod End Mount Gripper / DG--ROD-END-SAT pg. 1 6 Cable Coupler w/ Base Plate / DG-CC-SAT pg. 8 7 Tensioning Gripper w/ Base Plate / DG-TNS-SAT pg. 8 8 Ceiling/Floor Track / DG-TRACK-7 pg. 9 9 Cable w/ Barrel Terminal pg. 14 11 10 Garment Rod* / DG-ROD 11 Cable Coupler w/ Cover Plate / DG-CC-CPLT-SAT pg. 8 1 Support Gripper w/ Base Plate / DG--SAT pg.1 1 Cable Finial / DG-CT-SAT pg. 14 1 1 1 1 Garment Rods *Griplock can supply aluminum and stainless steel rods to order. tel 80 66.0064 fax 80 66.006 email info@griplocksystems.com www.griplocksystems.com

Displays/Shelving FIXED MOUNT DISPLAY Griplock s ceiling to floor shelving system can be situated anywhere in a space. Its individual suspension points make it ideal for a fixed location while still allowing vertical movement of the shelving. Components are available for use with most shelving types including, metal, wood, glass and acrylic. Griplock can supply shelving to order. Visit our website or contact us for more information. 1 1 1 1 1 1 8 8 8 8 8 8 1 Cable Coupler w/ Base Plate / DG-CC-SAT pg. 8 Support Gripper w/ Cover Plate / DG--CPLT-SAT pg. 1 Swiveling Side Mount Gripper / DG--SMU-SAT pg. 1 4 Swiveling Double Side Mount Gripper / DG--SMUX-SAT pg. 1 Swiveling Side Clamp Gripper / DG--SCU-SAT pg. 10 6 Swiveling Double Side Clamp Gripper / DG--SCUX-SAT pg. 10 7 Tensioning Gripper w/ Base Plate / DG-TNS-SAT pg. 8 8 Cable w/ Barrel Terminal / DAS--71-XXX pg. 14 9 Fixed Wall Clamp / DG-WSC-SAT pg. 1 4 4 6 6 6 6 Partial Wall Mounting Fixed Wall Clamps lock shelves to the wall while cables support them at the front. 6 7 7 7 7 7 9 9 7 tel 80 66.0064 fax 80 66.006 email info@griplocksystems.com www.griplocksystems.com

4 Displays/Signage WALL TRACK MOUNTED SIGNAGE Track mounted signage options let you suspend and change signs, art, photographs and more - vertically and horizontally - without damaging your walls. Visit our website or contact us for more information. 10 11 11 11 11 11 11 11 1 1 6 6 8 8 4 1 1 7 9 9 7 4 10 tel 80 66.0064 fax 80 66.006 email info@griplocksystems.com www.griploc 1 Guide Clamp - Large / DG-GC-SAT pg. 10 Swiveling Side Clamp Gripper / DG--SCU-SAT pg. 10 Double Guide Clamp - Large / DG-GCX-SAT pg. 10 4 Swiveling Double Side Clamp Gripper / DG--SCUX-SAT pg. 10 Wall Track Tensioning Gripper / DG-TNS-TRACK-SAT pg. 9 6 Stand Off Mount Guide / DG-GSOM-SAT pg. 11 7 Stand Off Mount Gripper / DG--SOM-SAT pg. 11 8 Stand Off Clamp Guide / DG-GSLU-SAT pg. 11 9 Stand Off Clamp Gripper / DG--SLU-SAT pg. 11 10 Wall Track / DG-WALL-TRACK-80 pg. 9 11 Cable w/ Barrel Terminal pg. 14 tel 80 66.0064 fax 80 66.006 email info@griplocksystems.com www.griplocksystems.com

Displays/Signage FIXED MOUNT SIGNAGE Materials from glass to foamcore can be hung wall to wall or ceiling to floor using a combination of Griplock s sign hanging components. Visit our website or contact us for more information. 1 9 6 7 1 Jointed Coupler w/ Anchor Plate / DG-CC-JU-APLT-SAT pg. 8 Side Clamp Gripper - Left / DG-1-SCL-SAT pg. 10 Guide Clamp - Small / DG-GCK-SAT pg. 10 4 Jointed Tensioning Gripper w/ Anchor Plate / DG-TNS-JU-APLT-SAT pg. 8 Jointed Coupler w/ Cover Plate / DG-CC-JU-CPLT-SAT pg. 8 6 Double Side Clamp Gripper / DG-1-SCX-SAT pg. 10 7 Double Guide Clamp - Small / DG-GCKX-SAT pg. 10 8 Jointed Tensioning Gripper w/ Cover Plate / DG-TNS-JU-CPLT-SAT pg. 8 9 Cable w/ Barrel Terminal pg. 14 8 4 1 1 1 Fixed Stand Off Mount - Medium / DG-SO-00-SAT pg. 1 Fixed Stand Off Mount - Small / DG-SO-0-SAT pg. 1 ksystems.com 1 Cable Coupler w/ Cover Plate / DG-CC-CPLT-SAT pg. 8 Double Stand Off Mount Gripper / DG--SOMX-SAT pg. 11 Tensioning Gripper w/ Anchor Plate / DG-TNS-APLT-SAT pg. 8 tel 80 66.0064 fax 80 66.006 email info@griplocksystems.com www.griplocksystems.com

6 Displays/Signage SIGNS & BANNERS Ceiling hung signage can be elegantly suspended in a variety of configurations. Display changes are quick and easy. 1 1 1 Acoustic Tile/Drywall Gripper / DG-1-CPLT-SAT pg. 9 Cable w/ Ball Terminal /64 (1.mm) / DAS-1-80-XXX pg. 14 Cable w/ Mini Gated Hook /64 (1.mm) / DAS-1-GHKZ-XXX pg. 14 1 Cable w/ Ball Terminal /64 (1.mm) / DAS-1-80-XXX pg. 14 Fixed Clamp - Small / DG-TC-00-SAT pg. 1 Fixed Clamp - Medium / DG-TC-70-SAT pg. 1 4 1 6 1 1 Twist on T-Bar Clip / DG-Q6-W pg. 9 Cable w/ Mini Gated Hook /64 (1.mm) / DAS-1-GHKZ-XXX pg. 14 Top Clamp Gripper / DG-1Z-TC-00-SAT pg. 11 4 Wrap Around T-Bar Clip / DG-BA1 pg. 9 Cable Coupler w/ Cover Plate / DG-CC-CPLT-SAT pg. 8 6 Cable w/ Barrel Terminal 1/16 (1.6mm) / DAS-16-87-XXX pg. 14 1 Swiveling Side Mount Gripper / DG--SMU-SAT pg.1 Cable Finial / DG-CT-SAT pg. 14 Griplock can supply custom wooden dowels to order. tel 80 66.0064 fax 80 66.006 email info@griplocksystems.com www.griplocksystems.com

Components 7

8 Components/Ceiling/Floor CEILING TO FLOOR & WALL MOUNTED Most applications are ceiling to floor, however, these tensioning systems can run from any surface to any surface at any angle. Use the jointed systems for angled applications. The terminal end of the cable is captured by the Cable Coupler at the upper end of the system and the free end is fed into the Tensioning Gripper at the lower end, which tightens the cable by means of its internal turnbuckle. The Anchor Plate is used to attach the system more securely to structure. The Cover Plate is decorative. All components can be screwed to structural surfaces, but because of their internal 1/4-0 threads, they can also be attached to pre-set threaded studs. Visit our website or contact us for more information. Cable Coupler w/ Base Plate DG-CC-SAT pgs.,,6 Cable Coupler w/ Anchor Plate DG-CC-APLT-SAT Cable Coupler w/ Cover Plate DG-CC-CPLT-SAT pgs.,,6 Jointed Cable Coupler w/ Base Plate DG-CC-JU-SAT Jointed Cable Coupler w/ Anchor Plate DG-CC-JU-APLT-SAT pg. Jointed Cable Coupler w/ Cover Plate DG-CC-JU-CPLT-SAT pg. Tensioning Gripper w/ Base Plate DG-TNS-SAT pgs., Tensioning Gripper w/ Anchor Plate DG-TNS-APLT-SAT pg. Tensioning Gripper w/ Cover Plate DG-TNS-CPLT-SAT Jointed Tensioning Gripper w/ Base Plate DG-TNS-JU-SAT Jointed Tensioning Gripper w/ Anchor Plate DG-TNS-JU-APLT-SAT pg. Jointed Tensioning Gripper w/ Cover Plate DG-TNS-JU-CPLT-SAT pg. * DRAWINGS ARE NOT TO SCALE tel 80 66.0064 fax 80 66.006 email info@griplocksystems.com www.griplocksystems.com

Components/Ceiling/Floor/Track 9 TRACK SYSTEMS & CEILING CONNECTORS Tracks should be attached securely to structural surfaces only. They are not pre-drilled, but a drill-starter groove is provided. PVC Cover Ceiling/Floor Track DG-TRACK-7 Each 7 extruded aluminum track section comes with 4 Track Clips. pg. Track Clip DG-TRACK-CLIP 4 clips per track section lock floor and ceiling tensioning components to the track. Cable Coupler w/ Base Plate DG-CC-SAT pgs.,,6,8 Wall Track DG-WALL-TRACK-80 Each 80 extruded aluminum track section comes with a paintable white PVC cover and matching end caps. For longer runs of track a continuous cover is available. pg. 4 Acoustic Tile Drywall Gripper DG-1-CPLT-SAT Connects to ceiling tile or drywall. Excess cable passes through the hollow thread. For 1/ - /64 cable only. Comes w/ toggle nut. Maximum weight lbs. pg. 6 Tensioning Gripper w/ Base Plate DG-TNS-SAT pgs., Wall Track Tensioning Gripper DG-TNS-TRACK-SAT Comes w/ lower connector cable. For /64-1/16 cable only. pg. 4 Twist 0n T-Bar Clip DG-Q6-W Maximum weight lbs. Shown w/ Mini-Gated Hook. pg. 6 * DRAWINGS ARE NOT TO SCALE End Cap per track section Wrap Around T-Bar Clip DG-BA1 Shown w/ Cable Coupler. Maximum weight lbs., unless wired to structure. pg. 6 tel 80 66.0064 fax 80 66.006 email info@griplocksystems.com www.griplocksystems.com

10 Components/Midway CLAMPS Side Clamp Grippers lock to shelves/displays and grip the cable. Guide Clamps lock to shelves/displays and slide on the cable. Swiveling Grippers hold material at any angle. When attached to vertical displays, Guide Clamps normally hold the upper end of the material and Clamp Grippers hold the lower end of the material. All clamps come with a short and a long nylon-padded set-screw. Swiveling Side Clamp Gripper DG--SCU-SAT For material 0.7 (10mm) thick. 1/16 / cable. pg.,,4 Guide Clamp - Large DG-GC-SAT For material 0.7 (10mm) thick. pg.,4 Swiveling Double Side Clamp Gripper DG--SCUX-SAT For material 0.7 (10mm) thick. 1/16 / cable. pg.,4 Double Guide Clamp - Large DG-GCX-SAT For material 0.7 (10mm) thick. pg. 4 Side Clamp Gripper - Left DG-1-SCL-SAT For material 0. (7mm) thick. /64 1/16 cable pg. Guide Clamp - Small DG-GCK-SAT For material 0.7 (10mm) thick. pg. Side Clamp Gripper - Right DG-1-SCR-SAT For material 0. (7mm) thick. /64 1/16 cable pg. Double Side Clamp Gripper DG-1-SCX-SAT For material 0. (7mm) thick. /64 1/16 cable pg. Double Guide Clamp - Small DG-GCKX-SAT For material 0. (7mm) thick. pg. * DRAWINGS ARE NOT TO SCALE tel 80 66.0064 fax 80 66.006 email info@griplocksystems.com www.griplocksystems.com

Components/Midway 11 STAND OFF MOUNTS & STAND OFF CLAMPS Stand Off Mounts are used with glass, acrylic and other heavy or bulky display materials. They come with plastic bushings and 1/4-0 studs in lengths from 0.0 to 1.0 to capture material up to 1. thick. Stand Off Clamps work best with light-weight display materials. Guide Clamps normally hold the top of display materials and Clamp Grippers hold the bottom of the material, as shown on page 4. Top Clamp Gripper DG-1Z-TC-00-SAT For material 0. (7mm) thick. /64 1/16 cable pg. 6 Stand Off Clamp Gripper DG--SLU-SAT For material 0.0 (14mm) thick. 1/16 / cable pg. 4 Stand Off Clamp Guide DG-GSLU-SAT For material 0.0 (14mm) thick. pg. 4 Double Stand Off Mount Gripper DG--SOMX-SAT For material 1. (8mm) thick. 1/16 / cable pg. Stand Off Mount Gripper DG--SOM-SAT For material 1. (8mm) thick. 1/16 / cable pg. 4 Stand Off Mount Guide DG-GSOM-SAT For material 1. (8mm) thick. pg. 4 * DRAWINGS ARE NOT TO SCALE tel 80 66.0064 fax 80 66.006 email info@griplocksystems.com www.griplocksystems.com

1 Components/Midway FIXED STAND OFFS & CLAMPS Fixed Stand Off Mount - Small DG-SO-0-SAT For material 0. (7mm) thick. Holds material 0.6 from wall surface. pg. Fixed Wall Clamp DG-WSC-SAT The clamp holds shelvng material 0.7 (10mm) thick. It must be screwed securely to the structure. pg. Fixed Stand Off Mount - Medium DG-SO-00-SAT For material 0.0 (10mm) thick. Holds material 1 from wall surface. pg. Swiveling Side Mount Gripper DG--SMU-SAT 1/16 / cable p,,6 Swiveling Double Side Mount Gripper DG--SMUX-SAT For material 1. (8mm) thick. 1/16 / cable pg., Rod End Mount Gripper DG--ROD-END-SAT pg. Double Rod End Mount Gripper DG--ROD-ENDX-SAT 1/16 / cable For 1/16 / cable. These parts are sold separately or as part of a rod assembly as shown on page. For 1/16 / cable. These parts are sold separately or as part of a rod assembly as shown on page. * DRAWINGS ARE NOT TO SCALE tel 80 66.0064 fax 80 66.006 email info@griplocksystems.com www.griplocksystems.com

Components/Midway 1 SHELVING & SIGNAGE Components on this page are for shelving, signage and decorative support. Hook Gripper DG-1-GHA For /64 & 1/16 cable Reverse Release Support Gripper DG-1-NT-RR-SAT 1/ /64 Cable Supports light-weight decorative fixtures such as glass bubbles. Reverse release allows adjustment from below. Hanging Coil DG-HANG-COIL Hook-supported for 0.0 foamcore Maximum weight lbs. Support Gripper w/ Base Plate* DG--SAT 1/16 / Cable pg. Support Gripper w/ Cover Plate* DG--CPLT-SAT 1/16 / Cable pg. *Plates are detatchable Fixed Clamp - Small DG-TC-00-SAT For 0.0 thick material. Use with DAS-1-80-XXX cable only. See cable information on page 14. pg. 6 Bullet Shaped Support Gripper* DG--BUL-KFB-SAT 1/16 / Cable Fixed Clamp - Medium DG-TC-70-SAT For 0.70 thick material. Use with DAS-1-80-XXX cable only. See cable information on page 14. pg. 6 *Plate is detatchable * DRAWINGS ARE NOT TO SCALE tel 80 66.0064 fax 80 66.006 email info@griplocksystems.com www.griplocksystems.com

14 Components/Cables DISPLAY CABLES Griplock Display Cables are made from 7 x 7 medium-to-high tensile strength 04 stainless steel aircraft cable, factory fitted with molded zinc or swaged steel barrels, balls and hook terminals. Aluminum oval sleeves are used for looped cables. Griplock Terminals are guaranteed to the full published break-weight of the cable, with the exception of the DAS-1-GHKZ zinc Mini Gated Hook which has a maximum allowable weight-load of lbs. Unless otherwise noted, Griplock Grippers are designed to work with / (.mm) and /64 (.0mm) cables. These grippers will also work with 1/16 (1.6mm) cables, but at reduced weight loads. NOTE: When used in conjunction with the Griplock gripper mechanism, cables have a break-weight that is less than the actual break-weight of the cable alone. Please study the cable compatibility and weight load chart on page 16. Visit our website or email us for more information. XXX in the cable part number refers to the length of the cable in inches. Stock cable sizes are: 60, 10, and 180. Cable w/ Ball Terminal DAS-1-80-XXX /64 (1.mm) Use with Fixed Clamps as shown on pg. 1. Cable w/ Barrel Terminal DAS-16-87-XXX 1/16 (1.6mm) DAS-0-87-XXX /64 (.0mm) DAS--71-XXX / (.mm) pgs.,,4,,6 Cable w/ Mini Gated Hook DAS-1-GHKZ-XXX /64 (1.mm) Maximum allowable weight: lbs. Use w/ Twist-On T-Bar Clip shown on page 9 or the Hanging Coil on page 1. Cable w/ Small Gated Hook DAS-16-GHK-XXX 1/16 (1.6mm) Cable w/ Gated Hook DAS-16-GH-XXX 1/16 (1.6mm) DAS-0-GH-XXX /64 (.0mm) DAS--GH-XXX / (.mm) Other cable diameters available LOOPED CABLES: Use when unistrut or similar structural steel is used as an attachment point. Cable w/ Loop End DAS-1-44-XXX /64 (1.mm) DAS-16-44-XXX 1/16 (1.6mm) DAS-0-44-XXX /64 (.0mm) DAS--44-XXX / (.mm) Other cable diameters available Cable w/ Loop & Thimble DAS-1-4-XXX /64 (1.mm) DAS-16-4-XXX 1/16 (1.6mm) DAS-0-4-XXX /64 (.0mm) DAS--4-XXX / (.mm) Other cable diameters available Cable Finial DG-CT-SAT for all cable sizes pg.,6 The Pushmepullyu Quick Loopmaker DG-1ZZ Maximum allowable weight: 80lbs w/ 1/16 (1.6mm) cable, 40lbs w/ /64 (1.mm) cable. Cable Cutter TL-CUTTER Approved for aircraft cable up to 1/8. * DRAWINGS ARE NOT TO SCALE tel 80 66.0064 fax 80 66.006 email info@griplocksystems.com www.griplocksystems.com

Index & Technical Data 1

16 Data/Weightloads Instructions for Use Most grippers and couplers in this catalog are of plated brass and have a satin-chrome finish. Other finishes are available. For detailed line drawings please visit our website or contact us. When installed correctly, a floor to ceiling system will be supported by the full strength of each weight-bearing cable. In accordance with cable industry standards, Griplock recommends using no more than 0% of the full strength of each cable as a safe working load. To determine the maximum weight load for a display system, multiply the number of cables by the safe working load for the combination of cable diameter and Griplock Gripper you are going to use. For example: (1) a sign hung from two 1/16 cables using the DG-1Z-TC- 00-SAT (page 11) has a load capacity of 10 lbs ( x 60 lbs) () a shelf suspended on four.mm cables has a safe load capacity of 0 lbs (4 x 10), provided the weight is evenly distributed on the shelf. For more information on weight loads please see the chart below. You may also visit our website or email us for more information. Cable Diameter Gripper Part No. Beginning with: 1. /0.8 mm /64 /1.mm 1/16 1/6mm /64 /.0mm / /.mm DG-1 10 Non Compatible Non Compatible Non Compatible DG-1 Non Compatible 60 Non Compatible Non Compatible DG- Non Compatible Non Compatible 40 90 10 DG-TNS Non Compatible Non Compatible 40 90 10 Cable Only (Without Gripper) 6 0 9 10 00 The information in this chart is not applicable to any other cable gripping product. Use of Griplock supplied cables is assumed. Figures are in pounds and reflect the cable industry standard 1: safety ratio for static loads. Weight load guidelines and other specifications are for illustration purposes only. They should not be construed as a warranty that the product or system will conform. Each purchaser is solely responsible for determining that (1) the product and/or system is suitable for the intended application, and () the product and/or system complies with all federal, state and local safety and trade laws and regulations. Installers are cautioned that the integrity of the structures to which these components are attached, and the fasteners used to attach them, are critical to the integrity of the overall system and should therefore be evaluated by a qualified engineer or installer. IF THIS IS THE FIRST TIME you ve worked with Griplock Display Systems, please read the following information carefully: Use only 7x7 or 7x19 uncoated galvanized or stainless steel aircraft cable. When feeding cable through a gripper always allow cable to pass 1 beyond the gripper housing. When cutting excess cable always leave 1 of cable showing. Cable should be cut using purpose-built cutters, as shown on page 14. Cable will generally not fray when cut. In case of fraying apply a drop of super-glue. DO NOT ATTEMPT TO RUN AN ELECTICAL CURRENT THROUGH THESE CABLES. Use a separate power cord. Adhere strictly to the weight-load and gripper/cable compatibility guidelines shown above. The Griplock Display System is not recommended for outdoor use. It should not be exposed to wind or water or allowed to oscillate continuously. Avoid placing fixtures in chemical laden environments such as indoor swimming pools. Do not place non-tensioned fixtures close to HVAC vents where they may be exposed to air currents. Cables should not enter or exit couplers, grippers or tensioners at more than a degree angle. For angled applications use the jointed grippers and couplers shown on page 8. PROPRIETARY AND CONFIDENTIAL: The drawings and specifications contained in this publication are the exclusive property of Griplock Systems, LLC and shall not be divulged, reproduced, copied or used as the basis for the manufacture or sale of apparatus without the express written authorization of Griplock Systems, LLC. tel 80 66.0064 fax 80 66.006 email info@griplocksystems.com www.griplocksystems.com

Data/Installation 17 Installation to Structural Surfaces The drawings below illustrate common installation scenarios and the parts and fasteners that will best suit them. Note that these systems are only as strong as the structures to which they are attached and the fasteners used to attach them. All Base Plates and Tensioning Base Plates have internal 1/4-0 threads. If you have any questions, please contact us directly or seek the advice of a qualified installer. Fig. 1 Fig. Fig. Dry-wall & joist structure with 1/4-0 hanger bolt. (not supplied). Masonary surface with Hilti-type 1/4-0 anchor (not supplied). Wood structure with #1 wood screws (not supplied). Base Plate Cable Terminal Cable Coupler DG-CC-SAT Base Plate Cover Plate Cable Terminal Cable Coupler DG-CC-CPLT-SAT Anchor Plate w/ Base Plate Cable Terminal Cable Coupler DG-CC-APLT-SAT Aircraft cable. Aircraft cable. Aircraft cable. Tensioning Gripper w/ Base Plate DG-TNS-SAT Tensioning Gripper w/ Cover Plate DG-TNS-CPLT-SAT Tensioning Gripper w/ Anchor Plate DG-TNS-APLT-SAT Tensioning Base Plate Cover Plate Tensioning Base Plate Anchor Plate w/tensioning Base Plate Masonary surface with Hilti-type 1/4-0 anchor (not supplied). Masonary surface with Hilti-type 1/4-0 anchor (not supplied). Wood structure with #1 wood screws (not supplied). tel 80 66.0064 fax 80 66.006 email info@griplocksystems.com www.griplocksystems.com

18 Index/Components COMPONENTS/Definitions CABLE COUPLER...A non-adjustable Griplock cable connector which attaches the cable to an upper structural surface, generally a wall or ceiling. GRIPLOCK GRIPPER...A unique self locking device used to attach shelves, rods, signs, etc., to the cable. Griplock Grippers can be moved up and down the cable, allowing the fixtures to be adjusted to the desired height. MIDWAY COMPONENT... A gripper, mount, or clamp used between the ceiling and floor to attach shelves, rods, signs, etc., to the cable. TENSIONER... An adjustable Griplock Gripper used specifically at the floor level to connect to and tighten the cable. COMPONENTS NAME NUMBER PAGES CEILING / TOP COMPONENTS Acoustic Tile/Drywall Gripper Cable Coupler w/ Anchor Plate Cable Coupler w/ Base Plate Cable Coupler w/ Cover Plate Jointed Coupler w/ Anchor Plate Jointed Coupler w/ Base Plate Jointed Coupler w/ Cover Plate Twist On T-Bar Clip Wrap Around T-Bar Clip DG-1-CPLT-SAT...6,9 DG-CC-APLT-SAT...8 DG-CC-SAT...,,8,9 DG-CC-CPLT-SAT...,4,,6,8 DG-CC-JU-APLT-SAT...,8 DG-CC-JU-SAT...8 DG-CC-JU-CPLT-SAT...6,8,9 DG-Q6-W...6,9 DG-BA1...6,9 FLOOR/BOTTOM COMPONENTS Jointed Tensioning Gripper w/ Anchor Plate DG-TNS-JU-APLT-SAT...,8 Jointed Tensioning Gripper w/ Base Plate DG-TNS-JU-SAT...8 Jointed Tensioning Gripper w/ Cover Plate DG-TNS-JU-CPLT-SAT...,8 Tensioning Gripper w/ Anchor Plate DG-TNS-APLT-SAT...,8 Tensioning Gripper w/ Base Plate DG-TNS-SAT...,,8,9 Tensioning Gripper w/ Cover Plate DG-TNS-CPLT-SAT...,8 Wall Track Tensioning Gripper DG-TNS-TRACK-SAT...4,9 MIDWAY COMPONENTS Bullet Shaped Support Gripper DG--BUL-KFB-SAT...1 Double Guide Clamp - Large DG-GCX-SAT...4,10 Double Guide Clamp - Small DG-GCKX-SAT...,10 Double Rod End Mount Gripper DG--ROD-ENDX-SAT...1 Double Side Clamp Gripper DG-1-SCX-SAT...,10 Double Stand Off Mount Gripper DG--SOMX-SAT...,11 Fixed Clamp - Medium DG-TC-70-SAT...6,1 Fixed Clamp - Small DG-TC-00-SAT...6,1 Fixed Stand Off Mount - Medium DG-SO-00-SAT...,1 Fixed Stand Off Mount - Small DG-SO-0-SAT...,1 Fixed Wall Clamp DG-WSC-SAT...,1 tel 80 66.0064 fax 80 66.006 email info@griplocksystems.com www.griplocksystems.com

Index/Components 19 Garment Rod DG-ROD... Guide Clamp - Large DG-GC-SAT...,4,10 Guide Clamp - Small DG-GCK-SAT...,10 Hanging Coil DG-HANG-COIL...1 Hook Gripper DG-1-GHA...1 Reverse Release Support Gripper DG-1-NT-RR-SAT...1 Rod End Mount Gripper DG--ROD-END-SAT...,1 Side Clamp Gripper - Left DG-1-SCL-SAT...,10 Side Clamp Gripper - Right DG-1-SCR-SAT...,10 Stand Off Clamp Gripper DG--SLU-SAT...4,11 Stand Off Clamp Guide DG-GSLU-SAT...4,11 Stand Off Mount Gripper DG--SOM-SAT...4,11 Stand Off Mount Guide DG-GSOM-SAT...4,11 Support Gripper w/ Base Plate DG--SAT...,1 Support Gripper w/ Cover Plate DG--CPLT-SAT...,1 Swiveling Double Side Clamp Gripper DG--SCUX-SAT...,4,10 Swiveling Double Side Mount Gripper DG--SMUX-SAT...,,1 Swiveling Side Clamp Gripper DG--SCU-SAT...,,4,7,10 Swiveling Side Mount Gripper DG--SMU-SAT...,,6,1 Top Clamp Gripper DG-1Z-TC-00-SAT...6,11 TRACK Ceiling/Floor Track Track Clip Wall Track DG-TRACK-7...,9 DC-TRACK-CLIP...9 DG-WALL-TRACK-80...4,9 CABLES Cable Cutter Cable Finial Cable w/ Ball Terminal /64 (1.mm) Cable w/ Barrel Terminal 1/16 (1.6mm) Cable w/ Barrel Terminal /64 (.0mm) Cable w/ Barrel Terminal / (.mm) Cable w/ Gated Hook 1/16 (1.6mm) Cable w/ Gated Hook /64 (.0mm) Cable w/ Gated Hook / (.mm) Cable w/ Loop & Thimble 1/16 (1.6mm) Cable w/ Loop & Thimble /64 (.0mm) Cable w/ Loop & Thimble / (.mm) Cable w/ Loop End /64 (1.mm) Cable w/ Loop End 1/16 (1.6mm) Cable w/ Loop End /64 (.0mm) Cable w/ Loop End / (.mm) Cable w/ Mini Gated Hook /64 (1.mm) Cable w/ Small Gated Hook 1/16 (1.6mm) Pushmepullyu TL-CUTTER...14 DG-CT-SAT...6,14 DAS-1-80-XXX...6,14 DAS-16-87-XXX...6,14 DAS-0-87-XXX...14 DAS--71-XXX...,14 DAS-16-GH-XXX...14 DAS-0-GH-XXX...14 DAS--GH-XXX...14 DAS-16-4-XXX...14 DAS-0-4-XXX...14 DAS--4-XXX...14 DAS-1-44-XXX...14 DAS-16-44-XXX...14 DAS-0-44-XXX...14 DAS--44-XXX...14 DAS-1-GHKZ-XXX...6,14 DAS-16-GHK-XXX...14 DG-1ZZ...14 tel 80 66.0064 fax 80 66.006 email info@griplocksystems.com www.griplocksystems.com

The Art of Suspension The Griplock Display System: Elegant, Flexible and Incredibly Strong.

New Products for 014 Type 1 Universal Side Clamp Gripper Create a delicate, almost invisible presentation of shelving or signage on thin gauge cable using the Type 1 Universal Side Clamp Gripper. Swiveling to hold shelving or signage at any angle, it is one of our most flexible and useful display grippers. Holds Material: Up to 1/4 thick Use with: /64-1/16 cable Safe Working Load: Up to 60 lbs with 1/16 cable DG-1-SCU-SAT DG-1-SCUX-SAT Type 1 Side Clamp Shelf Gripper These small but strong clamps are a less expensive alternative to the Type 1 Universal Side Clamp Gripper. Because this gripper does not swivel, small shelves (eg single shoe size) require only grippers, rather than the typical 4. They will, of course, handle standard size shelving easily and elegantly. Holds Material: Up to 1/4 thick Use with: -64-1/16 cable Safe Working Load: Up to 60 lbs with 1/16 cable DG-1-SCH-SAT DG-1-SCHX-SAT Type 1 Reverse Release Ball Gripper Ideal for window displays, the Type 1 Reverse Release Ball Gripper is a decorative option for supporting lightweight shelving or delicate display objects from below. The Gripper releases by pulling down the plunger, making it easy to level a shelf or change the placement of an object along the cable. Use with: /64-1/16 cable Safe Working Load: Up to 60 lbs with 1/16 cable 1-K18-RR-SAT Type 0 Side Clamp Gripper Ideal for cable-supported room dividers, this satin-chromeplated steel gripper uses two nylon-tipped set screws to clamp down on acrylic and other medium-weight materials. Please contact Griplock for information on use with glass or metal panels. Holds Material: Up to 1/ thick Use with: / cable Safe Working Load: Up to 1 lbs DG-0-SCR-SAT DG-0-SCX-SAT *Drawings not to scale tel 80.66.0064 fax 80.66.006 email: info@griplocksystems.com www.griplocksystems.com

New Products for 014 The Heavyweight Clevis Gripper Looking for an industrial style Gripper to suspend large panels of glass or resin? The Heavyweight Clevis Gripper supports material up to ½ thick, attaching through a 9/16 hole in the medium. The cable exits through the side of the Gripper, allowing full use of the clevis opening. Holds Material: Up to 1/ thick Use with: 1/16 - / cable Safe Working Load: Up to 1 lbs with / cable DG-Z-TC-00-SAT Hidden Side Exit Gripper When appearance matters, our Hidden Side Exit Gripper comes into play. Sporting a Safety Cap to cover the exposed cable exit on the Gripper, the Gripper creates a finished minimalist look. Can be used at the ceiling or attached to your media. Use with: /64-1/16 cable Safe Working Load: Up to 60 lbs with 1/16 cable DG-1Z-140-SCC-SAT and 4 Cable Sputnik Grippers Ideal for hanging items with multiple suspension points, the multitasking Sputnik suspends your item from a single, primary cable, while leveling it with or 4 stabilizing cables, allowing both the height and the plane of the item to be adjusted. Type 1 Use with: /64-1/16 cable Safe Working Load: Call Griplock for weight loads Type Use with: /64 - / cable Safe Working Load: Call Griplock for weight loads *Drawings not to scale 1Z-SPT Z-SPT 1Z-SPT4 Z-SPT4 tel 80.66.0064 fax 80.66.006 email: info@griplocksystems.com www.griplocksystems.com

New Products for 014 The Loop-It Grippers Perfect for lightweight installations such as signage or window displays, the Loop-It lets you instantly create adjustable cable loops that you can attach to anything from ceiling truss to the belt loops in your jeans. The Loop-It is one of our most popular multipurpose grippers. Type 1 Use with: 1/ - /64 cable Safe Working Load: Up to lbs with /64 cable Type 1 Use with: /64-1/16 cable Safe Working Load: Up to 60 lbs with /64 cable DG-1-LPIT-SAT DG-1-LPIT-SAT Adjustable Hook Grippers Incredibly versatile, Hook Grippers are a great way to quickly suspend and level signs, banners, and art - or anything else you can hang with a hook. Type 10 Use with: 1/ cable Safe Working Load: Up to 1 lbs Type 1 Use with: /64-1/16 cable Safe Working Load: Up to 0 lbs with 1/16 cable Type 18 Use with: 1/16 - /64 cable Safe Working Load: Up to 90 lbs with /64 cable 10-HA ZF-1-HA 1-HA 18-HA Adjustable Ring Grippers A simple, elegant, adjustable ring - we ve seen it used to hold chandeliers, clothes hangers, potted plants and much more. Visual merchandisers can t get enough of these. Type 1 Use with: /64-1/16 cable Can hold up to: Up to 60 lbs with 1/16 cable Type 18 Use with: 1/16 - /64 cable Can hold up to: Up to 90 lbs with /64 cable 1-RI 18-RI *Drawings not to scale tel 80.66.0064 fax 80.66.006 email: info@griplocksystems.com www.griplocksystems.com

New Products for 014 Cable Grommet For Ceiling Tile Lets you run a support cable through standard /8 ceiling tile to the ceiling structure above. The cable grommet provides a clean finished look to the installation. Available in satin-chrome. Use with: All cables up to 1/8 Safe Working Load: Cable Grommet does not have a support function DG-B-140--CG-SAT Ceiling Tile Accoustical Tile Key Clip Insert a cable with a ball terminal directly into this Key Clip and twist it on to standard acoustical ceiling T-bar to create ceiling attachments for lightweight signage and promotional material. Leave it where it is and change the signage, or move it elsewhere on the grid if your presentation changes. Use with: /64-1/16 cable Safe Working Load: Call Griplock for weight loads HX-T-CLIP-KEY-W Twist-On T-Bar Clip Another way of creating fast installation points at the ceiling for lightweight materials. Twist the T-Bar Clip onto a standard acoustical ceiling T-Bar grid, then add a ceiling coupler or adjustable gripper to the ¼-0 stud on the Clip. Just thread a cable through the coupler or gripper and you are ready to hang your media. Use with: 1/4-0 internal threaded coupler or gripper Safe Working Load: Call Griplock for weight loads HX-T-CLIP-BA-4-16-W *Drawings not to scale tel 80.66.0064 fax 80.66.006 email: info@griplocksystems.com www.griplocksystems.com

New Products for 014 CableHook Gripper Wherever you have cable-supported elements - garment rods or shelving for instance - you can add the CableHook. Imagine a ceiling-to-floor cable with nothing but CableHooks supporting accessories belts, bags, hats. Twist them to the right angle, adjust their height to wherever works best. CableHooks come in a satin-chrome finish. Use with: 1/16 - / cable Safe Working Load: 60 lbs. DG--HK-SAT The 1- Mini Cable-Looper With the 1 Mini it s almost as easy putting up displays as it is dismantling them, and you can use both the gripper and cable over and over again. It s as easy as 1. Use with: 1/ - /64 Safe Working Load: 0 lbs. - 40 lbs. Depending on cable size ZF-1X Smooth Cable Tensioner This satin-chrome Floor Tensioner for thinner (1mm 1/16 ) cable tightens and secures ceiling-to-floor cables in a retail display installation. We ve added a cover to eliminate the excess cable slot for a sleeker more elegant finish. Use with: 1mm -1/16 cable DG-TNS1-SAT tel 80.66.0064 fax 80.66.006 email: info@griplocksystems.com www.griplocksystems.com

New Products for 014 The Heavy Shelving Gripper This gripper is designed to support shelving in almost any material between 1 and thick. The satin-chrome finished adjustable Shelving Gripper supports shelving via a ½ diameter vertical through-hole at each corner of the shelf. The 1 diameter top-cap locks down the gripping mechanism while the 1 dia. base-cap supports the shelving from below. DG--SH Use with: 1/16 - / cable Safe Working Load: Up to 60 lbs. - 10 lbs. See Weight Load Chart Wall-to-Wall Shelving Systems These three adjustable systems use wood or steel wall-studs for support. It s easy to expand these systems in either direction. Because wall-studs are usually 16 apart, actual shelf widths will be 14.7, 0.7, 46.7 etc. If walls and ceilings are masonry or other solid material, shelving can be any width. Shelving must be 1 or deeper. Ceiling-to-Wall: Blocking may be needed if ceiling joists do not align with wall studs. Use with: /64 - / cable Safe Working Load: Call Griplock for weight loads tel 80.66.0064 fax 80.66.006 email: info@griplocksystems.com www.griplocksystems.com

GRIPLOCK SYSTEMS, LLC tel 80.66.0064 fax 80.66.006 www.griplocksystems.com email info@griplocksystems.com