2NB-15 HINGED DOOR 2NB-15 is a B-15 classified door. Door leaf is made of sandwich panel with PVC finish. Frame lacquered or in stainless steel. Lock and hinges are made of stainless steel. Optionals: Ventilation grill with open/close position Kick out panel Door closer Dimensions, accessories and finishing according to project. 2NB-15 B-15 Bureau Veritas 07127/CO EC B "T" TYPE FRAME DETAIL "Z" TYPE FRAME DETAIL B-B SECTION "T" TYPE FRAME A A B-B SECTION "Z" TYPE FRAME A-A SECTION "T" TYPE FRAME A-A SECTION "Z" TYPE FRAME B FEATURES 2NB-15 0,7 mm. DENSITY 150 kg/m3 1900 mm. 750 mm. DOOR LEAF THICKNESS 37-40mm. WEIGHT 40kg/m2 FIRE CLASSIFICATION B-15
3NB-15 ACOUSTIC DOOR 40/43 db The 3NB-15 door is specially designed for high noise reduction (40 db with grid to 43 db without grid). At the same time is B-15 fire retarding classified. The 3NB-15 door offers the same variations and optional features that 2NB-15 door. Dimensions, accessories and finishing according to project. FEATURES DENSITY 3NB-15 70-180 kg/m3 2050 mm. 900 mm. 3NB-15 B-15 Bureau Veritas 22777/AO EC PRODUCT NAME 3NB-15 (with grill) 3NB-15 (without grill) THICKNESS 50 mm. 50 mm. NOISE REDUCTION 40 db 43 db WEIGHT 38 kg/m2 40 kg/m2 CLASSIFICATION B-15 B-15
NA-30 DOOR The core of door leaf is a high density rock wool of 150 Kg/m3, reinforced with a frame of galvanized sheet of 1,5 and 3 mm. thickness and above this a decorative sheet of 0,8 mm. thickness is fitted. The finishing can be painted or low flame spread PVC film. Around the leaf, a stainless steel edge trim is assembled. The thickness of the door is 54 mm. The frame is a Z shapped 3 mm. steel sheet, and can be finished in stainless steel or lacquered. According to the leaf size, the door can have three or four L-shaped hinges, made of stainless steel as well as the rest of the hardware (handles, locks, escutcheons ). NA-30 DOOR A-30 Bureau Veritas 10587/CO EC CUT OUT IN BULKHEAD (C.O. + 75) C. O. 50 C. O. CUT OUT IN BULKHEAD (C.O. + 55) FEATURES NA-30 3 mm. 0,8 mm. 2000 mm. 1100 mm. PRODUCT NAME NA-30 THICKNESS 50 mm. THERMAL 0,75 kcal/m2h C WEIGHT 42 kg/m2 CLASSIFICATION A-30
A-60 CLASSIFIED HINGED DOORS Navaliber manufactures the A-60 hinged door under license of Hellbergs International. The core of door leaf is whether a Thermax insulation board of 400 Kg/m3 or a lighter composite board, both solutions are reinforced with a frame of galvanized sheet of 1,5 and 3 mm. thickness, and above this a decorative sheet of 1 mm. thickness is fitted. Around the leaf, a stainless steel edge trim is assembled. If the finishing is lacquered or painted, then the steel sheet will be of 1,2 to 1,5 mm. thickness, folding the interior sheet with the exterior one, avoiding the stainless steel edge trim. In the leaf a window or a hoseport can be assembled. The thickness of the door is 54 mm. A-60 doors support a large range of design variations, like different frames, doble leaf doors, etc. depending of use, situation and client requirements. According to the leaf size, each door can mount two, three or even four A-60 special hinges, made of galvanized or stainless steel, according to the frame. STANDARD DOORS M8 (single) A-60 Det Norske Veritas MED-B-4600 M8-D (double leaf) A-60 Det Norske Veritas MED-B-4601 M8-G (gastight) A-60 Det Norske Veritas MED-B-4600 M8-WF (similar to watertight) A-60 Det Norske Veritas MED-B-6164 LIGHT WEIGHT DOORS C8 (single) A-60 Det Norske Veritas MED-B-6554 C8-D (double leaf) A-60 Det Norske Veritas MED-B-6555 FEATURES STANDAR (M) LIGHT WEIGHT (C) 3-5 mm. 3-5 mm. 2-3 mm. 2-3 mm. 2-0,8 mm. Painted or St. St. Thermax Neptune board
A-60 CLASSIFIED SLIDING DOORS Navaliber manufactures the A-60 sliding door under license of Hellbergs International. The core of door leaf is whether a Thermax insulation board of 400 Kg/m3 or a lighter composite board. Both solutions are reinforced with a frame of galvanized sheet of 2 and 3 mm. thickness and above this a decorative sheet of 1 mm. thickness is fitted. Around the leaf, a stainless steel edge trim is assembled. If the finishing is lacquered or painted, then the steel sheet will be of 1 to 2 mm. thickness, folding the interior sheet with the exterior one, avoiding the stainless steel edge trim. In the door leaf a hoseport can be assembled. The thickness of the door is 54 mm. A-60 doors could support a large range of design variations, like different frames, doble leaf doors, etc. depending of use and client requirements Each door leaf mount A-60 special sliding guides and can be operated by a electric or a pneumatic approved system. STANDARD DOORS M8-S (single) A-60 Det Norske Veritas MED-B-4602 M8-SD (double leaf) A-60 Det Norske Veritas MED-B-5794 M8-SWF (watertight) A-60 Det Norske Veritas MED-B-6165 LIGHT WEIGHT DOORS C8-S (single) A-60 Det Norske Veritas MED-B-6556 C8-SDT (tandem double leaf sliding) A-60 Det Norske Veritas MED-B-6557 FEATURES STANDAR (M) LIGHT WEIGHT (C) 3-5 mm 3-5 mm 2-3 mm 2-3 mm 2-1,2 mm 0,8 mm Painted or St. St. Thermax Neptune board