SLONE DRK LENING BOOKSE HRDWRE 4 - large bolts 10 - small bolts 1 - small screw 4 - medium screws 1 - large screw 2 - wall fittings 1 - wall strap 1 - plastic anchor 8 - wood dowels Thank you for purchasing the Sloane Dark Leaning Bookcase. This page lists all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product. s you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. Note: 2 people are required to safely assemble this product. OMPONENTS 2 - connecting plates TOOLS REQUIRED allen wrench (included) phillips head screwdriver Drill and 1/4"drill bit 4 - plates Missing hardware? Please call 800.606.6387 for replacements. top bottom 1 - left 1 - right 5 - shelves BOTTOM NOTE: Bottom is indicated as shown. 1 - bottom 1 - top 1 Insert 8 wood dowels into top and bottom s as shown. Made in Indonesia - r11 ustomer Service 800.967.6696 www.crateandbarrel.com Page 1 of 4
SLONE DRK LENING BOOKSE 2 ) Fit dowels of s into right as shown. Make sure top and bottom s are assembled in the appropriate location. Secure each with 1 large bolt and 1 plate as shown, using a phillips head screwdriver. B) Position right with 5 shelves (in descending depths) as shown. Place the shortest depth shelf at the top of the s, and longest depth shelf at the bottom. bottom B top large bolt plate ) Insert 1 small bolt through each shelf side, and secure each screw with an allen wrench. right left 3 ) Fit dowels of s into left. Secure each with 1 large bolt and 1 plate as shown, using a phillips head screwdriver. bottom B B) Position left with 5 shelves as shown. ) Insert 1 small bolt through each shelf side, and secure each screw with an allen wrench. Position unit. ssembly is now complete. shelves top LENING ND RE lean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Made in Indonesia- r11 ustomer Service 800.967.6696 www.crateandbarrel.com Page 2 of 4
SLONE DRK LENING BOOKSE F wall strap plastic anchor D large screw wall fitting & small screw SFETY MOUNTING SSEMBLY For added safety and stability, it is recommended that the wall mounting hardware be installed. For safe mounting, it is essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall, concrete, etc.). Mount to wood studs whenever possible. ) ttach 1 wall fitting to assembled unit as shown, using 1 small screw. B) Determine the final location of shelving unit. Mark position on the wall, approximately 2" below the bracket mounted to the back of the unit. ) Drill a hole in the wall stud. If the wall stud is not available, drill a hole in the wall that is slightly smaller in diameter than the anchor. Gently tap the plastic anchor until the flange of the anchor is flush with the wall. D) ttach the wall fitting to the wall by inserting 1 large screw through the wall fitting and into the plastic anchor in the wall. E) Place the unit so the wall fitting on the back edge is aligned with the wall fitting on wall. F) Lace one end of the wall strap through both fittings, and into the other end of the strap. G) Pull the strap tightly until secure. NOTE: If you are unsure about your wall type or what mounting method you should use, consult a qualified professional or your local hardware store. Mounting assembly is now complete. Made in Indonesia- r11 ustomer Service 800.967.6696 www.crateandbarrel.com Page 3 of 4
SLONE DRK LENING BOOKSE MULTIPLE LENING SHELVES/DESK SSEMBLY If you purchased multiple leaning items, it is suggested that every two or more item be secured together. s shown, connect every 2 units with 2 connecting plates. ttach each plate with 2 medium screws using a screwdriver. Repeat steps for each additional leaning unit item. Made in Indonesia - r11 ustomer Service 800.967.6696 www.crateandbarrel.com Page 4 of 4
SLONE DRK LENING DESK HRDWRE 2 - large bolts 6 - small bolts 17 - small screws 4 - medium screws 1 - large screw 2 - wall fittings 1 - wall strap 1 - plastic anchor 4 - wood dowels 2 - desktop brackets (1 left, 1 right) 2 - connecting plates 4 - plates Missing hardware? Please call 800.606.6387 for replacements. Thank you for purchasing the Sloane Dark Leaning Desk. This page lists all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product. s you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. Note: 2 people are required to safely assemble this product. TOOLS REQUIRED allen wrench (included) phillips head screwdriver Drill and 1/4"drill bit OMPONENTS BOX 1 OMPONENTS BOX 2 1 - desktop 2 - shelves 1 - left 1 - right 1 - top 1 Insert 4 wood dowels into top as shown. Made in Indonesia - r11 ustomer Service 800.967.6696 www.crateandbarrel.com Page 1 of 4
SLONE DRK LENING BOOKSE 2 ) Fit dowels of s into right as shown. Make sure top and bottom s are assembled in the appropriate location. Secure each with 1 large bolt and 1 plate as shown, using a phillips head screwdriver. B) Position right with 5 shelves (in descending depths) as shown. Place the shortest depth shelf at the top of the s, and longest depth shelf at the bottom. bottom B top large bolt plate ) Insert 1 small bolt through each shelf side, and secure each screw with an allen wrench. right left 3 ) Fit dowels of s into left. Secure each with 1 large bolt and 1 plate as shown, using a phillips head screwdriver. bottom B B) Position left with 5 shelves as shown. ) Insert 1 small bolt through each shelf side, and secure each screw with an allen wrench. Position unit. ssembly is now complete. shelves top LENING ND RE lean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Made in Indonesia- r11 ustomer Service 800.967.6696 www.crateandbarrel.com Page 2 of 4
SLONE DRK LENING BOOKSE F wall strap plastic anchor D large screw wall fitting & small screw SFETY MOUNTING SSEMBLY For added safety and stability, it is recommended that the wall mounting hardware be installed. For safe mounting, it is essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall, concrete, etc.). Mount to wood studs whenever possible. ) ttach 1 wall fitting to assembled unit as shown, using 1 small screw. B) Determine the final location of shelving unit. Mark position on the wall, approximately 2" below the bracket mounted to the back of the unit. ) Drill a hole in the wall stud. If the wall stud is not available, drill a hole in the wall that is slightly smaller in diameter than the anchor. Gently tap the plastic anchor until the flange of the anchor is flush with the wall. D) ttach the wall fitting to the wall by inserting 1 large screw through the wall fitting and into the plastic anchor in the wall. E) Place the unit so the wall fitting on the back edge is aligned with the wall fitting on wall. F) Lace one end of the wall strap through both fittings, and into the other end of the strap. G) Pull the strap tightly until secure. NOTE: If you are unsure about your wall type or what mounting method you should use, consult a qualified professional or your local hardware store. Mounting assembly is now complete. Made in Indonesia- r11 ustomer Service 800.967.6696 www.crateandbarrel.com Page 3 of 4
SLONE DRK LENING BOOKSE MULTIPLE LENING SHELVES/DESK SSEMBLY If you purchased multiple leaning items, it is suggested that every two or more item be secured together. s shown, connect every 2 units with 2 connecting plates. ttach each plate with 2 medium screws using a screwdriver. Repeat steps for each additional leaning unit item. Made in Indonesia - r11 ustomer Service 800.967.6696 www.crateandbarrel.com Page 4 of 4