60W ELECTRONIC DRIVERS Constant Voltag e Driver Type Constant Voltage (Class 2) Maximum Wattage 60 Watts 120277 VAC ± 10% Universal Input Voltage 120 VAC ± 10% Dedicated Input Frequency 50/60Hz APPROVALS: UL 879, UL8750 recognized component * UL879 SAM approved EN61000 3 2 RoHS COMPLIANT SERIES LDRIVERS ELECTRICAL SPECIFICATIONS Watts Hatch Part Number Input Voltage Input Power Power Factor Input Current 120/277V Output Voltage Output Current Efficiency Case Style Dedicated Models * 60 LV6012N120I 120 VAC 73W >0.90 0.64A 12 VDC 5A 82% I * LV6024N120I 120 VAC 69W >0.90 0.64A 24 VDC 2.5A 87% I Universal Models * LV6012NUNVI Universal 120 277 VAC 71W >0.90 0.65A / 0.28A 12 VDC 5A 85% I * LV6012NUNVF Universal 120 277 VAC 71W >0.90 0.65A / 0.28A 12 VDC 5A 85% F LV6012NUNVN Universal 120 277 VAC 71W >0.90 0.65A / 0.29A 12 VDC 5A 85% N LV6012NUNVR Universal 120 277 VAC 71W >0.90 0.65A / 0.29A 12 VDC 5A 85% R 60 * LV6014NUNVI Universal 120 277 VAC 71W >0.90 0.65A / 0.28A 14 VDC 4.3A 85% I * LV6014NUNVF Universal 120 277 VAC 71W >0.90 0.65A / 0.28A 14 VDC 4.3A 85% F * LV6024NUNVI Universal 120 277 VAC 70W >0.90 0.65A / 0.28A 24 VDC 2.5A 86% I *º LV6024NUNVF Universal 120 277 VAC 70W >0.90 0.65A / 0.28A 24 VDC 2.5A 86% F º LV6024NUNVN Universal 120 277 VAC 70W >0.90 0.65A / 0.29A 24 VDC 2.5A 86% N LV6024NUNVK Universal 120 277 VAC 70W >0.90 0.68A / 0.28A 24 VDC 2.5A 86% K LV6024NUNVR Universal 120 277 VAC 70W >0.90 0.65A / 0.29A 24 VDC 2.5A 86% R º Over Temperature Protection PRODUCT FEATURES : Protection: Short circuit and overload protection EMC: Meets FCC47 CFR Part 15 (Class B) Consumer Limits @ 120V EMC: Meets FCC47 CFR Part 15 (Class A) Non Consumer limits @ 277V (I,F,K) Case Style: Type 1 Outdoor, suitable for dry and damp locations (IP20) (R,N) Case Style: IP66 Withstanding Voltage: I/P O/P 2kVAC Temperature Range: 30 60 C CASE DIMENSIONS & MICHANICAL SPECIFICATIONS ON PAGE 2 WWW.HATCHLIGHTING.COM 7821 Woodland Center Blvd. Tampa, FL 33614 PH: 813.288.8006 FX: 813.288.8105 REV: 2.0 190613
ELECTRONIC DRIVERS Driver Type Constant Voltage (Class 2) Maximum Wattage 60 Watts 120277 VAC ± 10% Universal Input Voltage 120 VAC ± 10% Dedicated Input Frequency 50/60Hz CASE DIMENSIONS & MECHANICAL SPECIFICATIONS: CASE STYLE I Metal Casing 1.18 / 29.97mm 1.38 / 35.052mm 1.50 / 38.1mm 1.57 / 39.87mm 1.30 / 33.02mm 1.70 / 43.18mm 3.00 / 76.2mm 1.90 / 48.26mm 3.20 / 81.28mm 3.00 / 76.2mm 8.90 / 226.06mm 9.50 / 241.3mm 4.63 / 117.60mm 5.00 / 127.00mm 8.65 / 219.71mm 9.26 / 235.20mm 7.76 / 197.10mm 8.35 / 212.09mm 1.30 / 33.02mm 9.49 / 241.046mm Wiring Information Input : 12, UL 1316#18AWG (Black and White) Output : 12, UL 1316#18AWG (Red and Blue) Tc Point Location Max. T c Point Temp.: 90 C WHITE BLACK WWW.HATCHLIGHTING.COM 7821 Woodland Center Blvd. Tampa, FL 33614 PH: 813.288.8006 FX: 813.288.8105 60W Constant Voltag e SERIES LDRIVERS DRIVER WHITE 2.6 / 66.04mm FRONT OF DRIVER RED Packaging Information BLACK 0.7 / 17.78mm BLUE Weight : Quantity : CASE STYLE F Metal Casing Wiring Information Input : 12, UL 1316#18AWG (Black and White) WHITE Output : 12, UL 1316 #18AWG (Red and Blue) BLACK Tc Point Location Max. T c Point Temp.: 90 C DRIVER BLACK 2.76in / 70.104mm BLUE Packaging Information Weight : Quantity : CASE STYLE LINE R Aluminum Casing Input Black Wiring Information White Green Wire Type : I/P & O/P use 6" SJTW Power Cord DRIVER Tc Point Location Max. T c Point Temp.: 90 C IP66 CASE STYLE IP 66 WHITE WHITE BLACK GREEN N Aluminum Casing APPROVALS: UL 879, UL8750 recognized component * UL879 SAM approved EN61000 32 2.08in / 52.832mm 2.0in / 30.8mm.4in / 10.16mm Wiring Information Input : 12, UL rated SJTW#18AWG x3c Output : 12, UL rated SJTW#22AWG x2c Tc Point Location Max. T c Point Temp.: 90 C 2.8in / 71.12mm RoHS COMPLIANT Packaging Information Weight : Quantity : WHITE BLACK FRONT OF DRIVER RED Packaging Information GREEN 1.5in / 38.1mm BLUE Weight : Quantity : CASE STYLE K Metal Casing Wiring Information WHITE Input : 12, UL 1316#18AWG (White, Black and Green) BLACK DRIVER Output : 12, UL1316/1430 #18AWG (Red and Blue) Tc Point Location Max. T c Point Temp.: 90 C WHITE BLACK GREEN FRONT OF DRIVER FRONT OF DRIVER FRONT OF DRIVER 2.17in / 55.118mm 1.58 / 40.132mm RED RED BLUE RED BLUE Packaging Information Weight : Quantity : RED BLUE RED (+) BLUE ( ) BLACK (+) WHITE () WHITE RED (+) BLACK DRIVER GREEN BLUE ( ) RED (+) GREEN BLUE ( ) 17.63oz 40pcs/carton 22.22oz 40pcs/carton 12V dc Output 24.69oz 40pcs/carton 38.8oz 15pcs/carton 29.98oz 20pcs/carton REV: 2.0 030114
60W Single Output Power Supply CLG60 series SPECIFICATION MODEL CLG6012 CLG6015 CLG6020 CLG6024 CLG6027 CLG6036 CLG6048 OUTPUT INPUT OTHERS NOTE DC VOLTAGE CURRENT RANGE RATED POWER VOLTAGE ADJ. RANGE CURRENT ADJ. RANGE LINE REGULATION LOAD REGULATION SETUP TIME VOLTAGE RANGE FREQUENCY RANGE POWER FACTOR (Typ.) EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT( Typ. ) LEAKAGE CURRENT OVER CURRENT SHORT CIRCUIT OVER VOLTAGE PROTECTION OVER TEMPERATURE ENVIRONMENT SAFETY & EMC CONSTANT CURRENT REGION Note.5 8.4 ~ 12V WORKING TEMP. WORKING HUMIDITY Note.4 STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION MTBF 12V 15V 20V 24V 27V 36V 48V 0 ~ 5A 0 ~ 4A 0 ~ 3A 0 ~ 2.5A 0 ~ 2.3A 0 ~ 1.7A 0 ~ 1.3A 60W 60W 60W 60W 62.1W 61.2W 62.4W RIPPLE & NOISE (max.) Note.2 2Vpp 2.4Vpp 1.8Vpp 2.7Vpp 2.7Vpp 3.6Vpp 4.6Vpp VOLTAGE TOLERANCE Note.3 SAFETY STANDARDS WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSION Fixed can be modified between the range above Fixed. Can be modified between 3% ~ 25% rated output current ±10% ±3.0% ±5.0% 500ms / 230VAC 3000ms / 115VAC at full load 90 ~ 295VAC 127 ~ 417VDC 47 ~ 63Hz PF>0.94/115VAC, PF>0.9/230VAC, PF>0.9/277VAC at full load (Please refer to "Power Factor Characteristic" curve) 85% 86% 87.5% 87% 88% 89% 89% COLD START 35A(twidth=45μs measured at 50% Ipeak) at 230VAC <0.75mA / 240VAC 95 ~ 110% Protection type : Constant current limiting, recovers automatically after fault condition is removed Hiccup mode, recovers automatically after fault condition is removed 13.8 ~ 16V 17.5 ~ 21V 23 ~ 28V 28 ~ 32V 31 ~ 35V 41 ~ 46V 54 ~ 60V Protection type : Shut down o/p voltage, repower on to recover 30 ~ +70 (Refer to "Derating Curve") 20 ~ 95% RH noncondensing 40 ~ +80, 10 ~ 95% RH ± 0.03%/ (0 ~ 50 ) 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes 495.7Khrs min. MILHDBK217F (25 ) Features : Universal AC input / Full range (up to 295VAC) Builtin active PFC function High efficiency up to 89% Protections: Short circuit / Over current / Over voltage / Over temperature Cooling by free air convection IP67 design for indoor or outdoor installations Class 2 power unit Pass LPS 100% full load burnin test High reliability Suitable for lighting and moving sign applications (Note.2) Compliance to worldwide safety regulations for lighting Suitable for dry / damp / wet locations 3 years warranty 10.5 ~ 15V 14 ~ 20V 16.8 ~ 24V 18.9 ~ 27V 25.2 ~ 36V 33.6 ~ 48V RATED CURRENT 5A 4A 3A 2.5A 2.3A 1.7A 1.3A EMC IMMUNITY F 110 M M SELV LPS 11.5 ~ 13V 14.5 ~ 16.2V 19.5 ~ 22V 24 ~ 26V 25 ~ 30V 32.5 ~ 39V 43.6 ~ 51.8V 0.8A/115VAC 0.4A/230VAC 0.3A/277VAC Shut down o/p voltage, recovers automatically after temperature goes down I/PO/P:3.75KVAC I/PFG:2KVAC O/PFG:0.5KVAC I/PO/P:100M Ohms / 500VDC / 25 / 70% RH ( for 48V only) ( except for 48V ) IP67.. UL879, UL8750, UL1310, TUV EN613471, EN61347213 independent, CAN/CSA C22.2 No. 223M91(except for 48V), CSA C22.2 No. 250.008(except for 48V), CSA C22.2 No. 207M89(except for 48V), IP67, J613471, J61347213 approved Compliance to EN55015, EN55022 (CISPR22) Class B, EN6100032 Class C ( 75% load) ; EN6100033 Compliance to EN6100042,3,4,5,6,8,11, EN55024, EN61547, light industry level (surge 4KV), criteria A DIMENSION 195.6*61.5*38.8mm (L*W*H) PACKING 0.86Kg; 16pcs/14.8Kg/0.54CUFT 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pairwire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Derating may be needed under low input voltage. Please check the static characteristics for more details. 5. Please refer to "DRIVING METHODS OF MODULE". 6. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must requalify EMC Directive on the complete installation again. 7. Direct connecting to s is suggested, but is not suitable for using additional drivers. 8. To fulfill requirements of the latest ErP regulation for lighting fixtures, this power supply can only be used behind a switch without permanently connected to the mains. File Name:CLG60SPEC 20140326
60W Single Output Power Supply CLG60 series Mechanical Specification Case No. 957A Unit:mm 11.9 9.6 195.6 171.8 300± 20 300± 20 AC/L(Brown) AC/N(Blue) FG (Green/Yellow) SJTW 18AWG 3C 32 46.5 61.5 T case 30.75 85.9 ψ4.2 4PL SVT 18AWG 2C +V(Red) V(Black) T case: Max. Case Temperature. 38.8 Block Diagram fosc : 90KHz(115VAC) 120KHz(230VAC) I/P EMI FILTER & RECTIFIERS POWER SWITCHING RECTIFIERS & FILTER +V V FG O.L.P. PWM & PFC CONTROL DETECTION CIRCUIT O.C.P. O.V.P. Derating Curve Static Characteristics 100 80 60 100 90 80 70 LOAD (%) 40 20 LOAD (%) 60 50 40 30 25 5 0 15 30 50 60 70 AMBIENT TEMPERATURE ( ) (HORIZONTAL) 90 100 125 135 145 155 165 175 180 200 230 295 INPUT VOLTAGE (V) 60Hz File Name:CLG60SPEC 20140326
60W Single Output Power Supply CLG60 series Power Factor Characteristic Constant Current Mode PF 1. 0 0 0. 9 8 0. 9 6 0. 9 4 0. 9 2 0. 9 0 0. 8 8 0. 8 6 0. 8 4 0. 8 2 0. 8 0 0. 7 8 5 0 % 6 0 % 7 0 % 8 0 % 9 0 % 1 0 0 % (60W) LOAD 2 7 7 V a c 2 3 0 V a c 1 1 5 V a c EFFICIENCY vs LOAD (48V Model) CLG60 series possess superior working efficiency that up to 89% can be reached in field applications. EFFICIENCY (%) 92 88 84 80 76 72 68 64 60 56 52 48 44 40 36 10% 20% 30% 40% 50% 60% 70% 80% 100% LOAD 277Vac 230Vac 115Vac DRIVING METHODS OF MODULE This power supply is suggested to work in constant current mode area (CC) to drive the s. 100 Vo(%) Constant Current area In the constant current region, the highest voltage at the output of the driver depends on the configuration of the end systems. Should there be any compatibility issues, please contact MEAN WELL. 70 (min.) Hiccup Protection 50 100 Io (%) Typical power supply IV curve File Name:CLG60SPEC 20140326
SPECIFICATION SHEET : T1UNV012V60L This Is An Original Product From Fulham Co., Inc E349510 IP66 Description : Independent direct current power supply. High efficiency and reduced weight and size. Constant output voltage. Wide range input 100 ~ 277 Volt. Power output up to 60 Watts. This Driver Will Operate Following Modules: Any Series or Parallel string of s designed for 12V Constant Voltage Input. ELECTRICAL DATA INPUT VOLT: 100V ~ 277V ± 10%, 50/60Hz INPUT CURRENT (MAX).72A @ 100VAC POWER FACTOR (PF) > 0.90 THD < 20% EFFICIENCY > 85% @ 120VAC SURGE PROTECTION YES CURRENT PROTECTION YES CONSTANT CURRENT, VOLTAGE OR POWER CONSTANT VOLTAGE OUTPUT CURRENT 5A OUTPUT VOLTAGE 12V OUTPUT SHORT CIRCUIT PROTECTION YES OUTPUT OPEN CIRCUIT PROTECTION YES OUTPUT TO GROUND SHORT PROTECTION YES OVER LOAD PROTECTION YES OVER TEMPERATURE PROTECTION N/A MAX. CASE HOT SPOT TEMPERATURE 90 C MIN. LAMP STARTING TEMPERATURE 40 C MAX. POSSIBLE AMBIENT TEMPERATURE 50 C APPROVAL/CLASS curus Class 2 (8750 & 879), Damp location, FCC Part 15, Class B MECHANICAL DATA WIRING DIAGRAMS Ø 0.168 9.49 2.38 WIRE BLACK WHITE RED BLUE YELLOW BROWN LENGTH INCHES 12.0 ± 0.5 12.0 ± 0.5 12.0 ± 0.5 12.0 ± 0.5 1.70 tc 0.94 R 0.18 8.90.88 BLK (L) WHT (N) GRN/YEL (GND) INPUT 100~277V DRIVER OUTPUT + + 12V INPUT ONLY MODULE MODULE 9.05 MODULE 8.28 1.21 Where : L = Length, W = Width, H = Height Fulham extends a limited warranty only to the original purchaser or to the first user for a period of 5 years from the date of manufacture when properly installed and operated under normal conditions of use. For complete terms and conditions, please reference the Fulham product catalog (www.fulham.com) Due to a program of continuous improvement, Fulham reserves the right to make modifications or variations in design or construction to the equipment described. 2006159 Rev G
Xitanium drivers outdoor Fixed (US) Xitanium 67W/2.8A24V INTELLIVOLT ROHS Xitanium Constant Current Outdoor product family offers a selection of drivers with lower output voltages in a range of convenient formfactors and wattages. The Xitanium Outdoor drivers are SELV (Safety Extra Low Voltage) compliant, enabling easy light engine design.xitanium Constant Voltage Outdoor drivers deliver a highly stable output voltage and are UL Class 2 rated. These drivers are the perfect choice for enabling easy modular connection of multiple PCBs in parallel. The Constant Voltage Outdoor category offers excellent reliability and ensures a simplified installation process. Robust design reduces maintenance and lowers the cost of ownership over the application lifetime. For optimal performance, luminaires require reliable drivers which match the long lifetime of the s. Product data General Characteristics Input Frequency Output Isolation Minimum voltage Material Number Operating Characteristics 50/60 Hz 3 (min) V INTA0024V28FO Ripple current 1 % Efficiency Range 85 % Output Power Range 67 W Power Factor (100% 0.99 (min) load) Input Power max 78 W Output Voltage 24 V Range Output Current 2800 Range (ma) Total Harmonic 20 (max) % Distortion IEC Input Current max 650 (max) ma Output Current 5 (min), 5 (max) % Tolerance Input Voltage Range 120277 V (AC) Wiring Characteristics Input Wire Length 228.6 mm Output Wire Length 711.2 mm Input wire AWG 18 Output wire AWG 18 Primary fusing Fused Secondary fusing None Required Temperature Characteristics Tcase maximum Tambient Product Dimensions Length A1 Length A2 Length A4 Width B1 Height C1 Fixing Hole Distance Width B2 Height C2 Approval&Application Chars ENEC certificate CE marking RoHS compliance UL certificate CSA certificate Short circuit Overload Noload EMI Safety regulations Environmental standard Product Data 85 (max) C 40 (min), 55 (max) C 240.5 mm 224.6 mm 211.1 mm 59.1 mm 39.7 mm 42.9 mm 37.7 mm Selflimited Protected Protected FCC 47 subpart 15; Class A EN 615581, EN 61558217, EN 60065 UL Damp & Dry Order code 913710891502 Full product code 913710891502 Full product name Xitanium 67W/2.8A24V INTELLIVOLT ROHS
Xitanium drivers outdoor Fixed (US) Order product name Xitanium 67W/2.8A24V INTELLIVOLT ROHS Pieces per pack 1 Packing configuration 20 Packs per outerbox 20 Bar code on pack 50781087079763 EAN1 Bar code on outerbox EAN3 Logistic code(s) 12NC Net weight per piece 50781087079763 913710891502 0.622 kg Dimensional drawing A2 C1 C2 B2 A4 B1 A1 Xitanium 67W/2.8A24V INTELLIVOLT ROHS Product A1 (Norm) A2 (Norm) A3 (Norm) A4 (Norm) B1 (Norm) B2 (Norm) B3 (Norm) C1 (Norm) C2 (Norm) D1 (Norm) 67W/2.8A24V INTELLIVOLT ROHS 240.5 224.6 211.1 59.1 42.9 39.7 37.7 2013 Koninklijke Philips N.V. (Royal Philips) All rights reserved. Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips N.V. (Royal Philips) or their respective owners. www.philips.com/lighting 2013, October 9 data subject to change
Global Tech Led, LLc. 60W Driver: LAV240S60HM9 I. Feature: 60W driver with 24V constant voltage output 0~10V Dimmable output power. Active power factor correction High efficiency Low harmonic distortion Output is isolated from AC input Over load protection Open circuit and short circuit protections. UL8750 (E327637) II. Basic specification: Describe the basic electrical specifications of the constant voltage controlled driver LAV240S60HM9. Input voltage range: 120 ~ 277 Vac, single phase Input frequency: 50 / 60 Hz Output channel: 1 channel Output voltage range: 24 V ± 3 % Output current range: 240 ~ 2500 ma Dimming range: 10 ~ 100 % High efficiency: Eff. > 90 % at 230 Vac High power factor: PF > 0.9 at full load Low T.H.D.: T.H.D. < 20 % Operating temperature: 25 ~ +50 1
Global Tech Led, LLc. 60W Driver: LAV240S60HM9 III. Dimension: The overall dimension is 172 (L) x 61 (W) x 31(H)mm. IV. Wiring: Description the wiring definition of the input / output leads. 2
Global Tech Led, LLc. 60W Driver: LAV240S60HM9 V. Test Results: 1. Input current: Measure the AC input current at maximum loading. Input voltage Input current (ma) Spec. 120V / 60Hz 583 230V / 50Hz 298 277V / 60Hz 247 2. Input wattage at noload condition: Measure the input wattage at no load. Input voltage Input wattage (W) Spec. 120V / 60Hz 0.91 230V / 50Hz 1.32 277V / 60Hz 1.91 3. Efficiency: Measure the output efficiency at different output watt. Input voltage (V) Input Power (W) Output voltage (V) Output current (A) output Power (W) Efficiency (%) 120V 66.0 23.9 2.51 59.9 90 230V 66.1 23.9 2.51 59.9 90 277V 66.2 23.9 2.50 59.7 90 3
Global Tech Led, LLc. 60W Driver: LAV240S60HM9 4. Open circuit voltage protection: Measure the output voltage when open circuit. Input voltage Output voltage (V) Spec. 120V / 60Hz 0.71 230V / 50Hz 1.12 277V / 60Hz 1.71 5. Short circuit protection: Short the output of the power supply. Input voltage Input wattage (W) Spec. 120V / 60Hz 2.61 230V / 50Hz 3.51 277V / 60Hz 5.81 6. Total harmonic distortion: Measure the current harmonic at full load. Input voltage (V) PF THD (%) Spec. 120V / 60Hz 0.99 3.1 230V / 50Hz 0.99 6.5 277V / 60Hz 0.98 7.8 4
Global Tech Led, LLc. 60W Driver: LAV240S60HM9 VI. Model name: L A V 240 S 60 H M9 (1) (2) (3) (4) (5) (6) (7) (8) (1) (2) Input voltage: 120~277 Vac (3) Output control style: V constant voltage C constant current (4) Output voltage (5) Output circuit: S Single, DDual, TTriple, QQuad (6) Output watt (7) Power factor: Hhigh power factor, Nnon power factor (8) 0~10V dim VII. Warranty 2 years at normal operation temperature. VIII. Weight & Packing Net weight: 465g Carton size: 43*29*20 cm Carton amount: 40pcs Carton gross weight: 20.6 kg 5
T1UNV024V100LS SPECIFICATION SHEET : T1UNV030V100LS This Is An Original Product From Fulham Co., Inc Description: Independent direct current power supply. High efficiency and reduced weight and size. Constant output voltage. Wide range input 100 ~ 277 Volt. Power output up to 100 Watts. IP64 E342838 E349510 This Driver Will Operate Following Lamps : T1UNV024V100LS: Any Series or Parallel string of s designed for 24V Constant Voltage Input. T1UNV030V100LS: Any Series or Parallel string of s designed for 30V Constant Voltage Input. ELECTRICAL DATA T1UNV024V100LS T1UNV030V100LS INPUT VOLT POWER FACTOR (PF) THD EFFICIENCY SURGE PROTECTION CURRENT PROTECTION CONSTANT CURRENT, VOLTAGE OR POWER 100 ~ 277V ± 10%, 50/60Hz > 0.90 < 10% @ 120VAC, < 20% @ 277VAC > 87% @ 120VAC, > @ 277VAC YES YES CONSTANT VOLTAGE OUTPUT CURRENT 4.1A 3.3A OUTPUT VOLTAGE 24V 30V OUTPUT SHORT CIRCUIT PROTECTION OUTPUT OPEN CIRCUIT PROTECTION OUTPUT TO GROUND SHORT PROTECTION OVER LOAD PROTECTION OVER TEMPERATURE PROTECTION YES YES YES YES N/A MAX. CASE HOT SPOT TEMPERATURE 89ºC 88ºC MIN. LAMP STARTING TEMPERATURE MAX. POSSIBLE AMBIENT TEMPERATURE APPROVAL/CLASS 40ºC 60ºC curus Class 2, DAMP LOCATION, FCC Part 15 Class A MECHANICAL DATA WIRING DIAGRAMS Ø 0.168 10.27 6.88 WIRE LENGHT INCHES BLACK WHITE RED BLUE 12.0 ± 0.5 12.0 ± 0.5 12.0 ± 0.5 12.0 ± 0.5 T1UNV024V100LS 1.59 R 0.18 9.67 TC 0.86 BLK (L) WHT (N) INPUT 100 277V DRIVER OUTPUT 24VDC + + MODULE MODULE MODULE 9.84 T1UNV030V100LS 1.19 Max. 9.05 BLK (L) WHT (N) INPUT 100 277V DRIVER OUTPUT 30VDC + + MODULE MODULE MODULE Where : L = Length, W = Width, H = Height Fulham extends a limited warranty only to the original purchaser or to the first user for a period of 5 years from the date of manufacture when properly installed and operated under normal conditions of use. For complete terms and conditions, please reference the Fulham product catalog (www.fulham.com) Due to a program of continuous improvement, Fulham reserves the right to make modifications or variations in design or construction to the equipment described. 2011282 Rev I
Xitanium drivers outdoor Dimmable (US) Xitanium 100W/4.1A24V DIM INTELLIVOLT Xitanium Constant Current Outdoor product family offers a selection of drivers with lower output voltages in a range of convenient formfactors and wattages. The Xitanium Outdoor drivers are SELV (Safety Extra Low Voltage) compliant, enabling easy light engine design.xitanium Constant Voltage Outdoor drivers deliver a highly stable output voltage and are UL Class 2 rated. These drivers are the perfect choice for enabling easy modular connection of multiple PCBs in parallel. The Constant Voltage Outdoor category offers excellent reliability and ensures a simplified installation process. Robust design reduces maintenance and lowers the cost of ownership over the application lifetime. For optimal performance, luminaires require reliable drivers which match the long lifetime of the s. Product data General Characteristics Input Frequency Output Isolation Minimum voltage Material Number 50/60 Hz 10 (min) V INTA0024V41DLO Secondary fusing None Required Control wire AWG 18 Temperature Characteristics Tcase maximum 85 (max) C Tambient 40 (min), 55 (max) C Operating Characteristics Ripple current 1 (max) % Efficiency Range 85 % Output Power Range 100 W Power Factor (100% 0.9 (min) load) Input Power max 117 W Output Voltage 24 V Range Output Current 4160 Range (ma) Total Harmonic 20 (max) % Distortion IEC Dimming range 10017 % Input Current max 950 (max) ma Output Current 5 (min), 5 (max) % Tolerance Type of Dimming 010V Input Voltage Range 120277 V (AC) Wiring Characteristics Input Wire Length 228.6 mm Control Wire Length 228.6 mm Output Wire Length 228.6 mm Input wire AWG 18 Output wire AWG 18 Primary fusing Fused Product Dimensions Length A1 Length A2 Length A4 Width B1 Height C1 Fixing Hole Distance Width B2 Height C2 Approval&Application Chars ENEC certificate CE marking RoHS compliance UL certificate CSA certificate Short circuit Overload Noload EMI Safety regulations Environmental standard Product Data 240.5 mm 224.6 mm 211.1 mm 59.1 mm 39.7 mm 42.9 mm 37.7 mm Order code 913701212802 Selflimited Protected Protected FCC 47 subpart 15; Class A EN615581, EN61558217, EN60065 UL Damp & Dry
Xitanium drivers outdoor Dimmable (US) Full product code 913701212802 Full product name Xitanium 100W/4.1A24V DIM INTELLIVOLT Order product name Xitanium 100W/4.1A24V DIM INTELLIVOLT Pieces per pack 1 Packing configuration 10 Packs per outerbox 10 Bar code on pack EAN1 Bar code on outerbox EAN3 Logistic code(s) 12NC Net weight per piece 50781087085603 50781087085603 913701212802 1.076 kg Dimensional drawing A2 C1 C2 B2 A4 B1 A1 Xitanium 100W/4.1A24V DIM INTELLIVOLT Product A1 (Norm) A2 (Norm) A4 (Norm) B1 (Norm) B2 (Norm) C1 (Norm) C2 (Norm) D1 (Norm) 100W/4.1A24V DIM INTELLIVOLT 240.5 224.6 211.1 59.1 42.9 39.7 37.7 2013 Koninklijke Philips N.V. (Royal Philips) All rights reserved. Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips N.V. (Royal Philips) or their respective owners. www.philips.com/lighting 2013, October 9 data subject to change
Xitanium drivers outdoor Fixed (US) Xitanium 100W 24V 4.1A 347480V Otd Xitanium Constant Current Outdoor product family offers a selection of drivers with lower output voltages in a range of convenient formfactors and wattages. The Xitanium Outdoor drivers are SELV (Safety Extra Low Voltage) compliant, enabling easy light engine design.xitanium Constant Voltage Outdoor drivers deliver a highly stable output voltage and are UL Class 2 rated. These drivers are the perfect choice for enabling easy modular connection of multiple PCBs in parallel. The Constant Voltage Outdoor category offers excellent reliability and ensures a simplified installation process. Robust design reduces maintenance and lowers the cost of ownership over the application lifetime. For optimal performance, luminaires require reliable drivers which match the long lifetime of the s. Product data General Characteristics Input Frequency Output Isolation Material Number Operating Characteristics 50/60 Hz HCNA0024V41FLO Ripple current 1 % Efficiency Range 85 % Output Power Range 100 W Power Factor (100% 0.9 (min) load) Input Power max 117 W Output Voltage 24 V Range Output Current 4160 Range (ma) Total Harmonic 20 (max) % Distortion IEC Input Current max 320 (max) ma Output Current 5 (min), 5 (max) % Tolerance Input Voltage Range 347480 V (AC) Wiring Characteristics Input Wire Length 228.6 mm Output Wire Length 228.6 mm Input wire AWG 18 Output wire AWG 18 Primary fusing Fused Secondary fusing None Required Temperature Characteristics Tcase maximum 85 (max) C Tambient Product Dimensions Length A1 Length A2 Length A4 Width B1 Height C1 Fixing Hole Diameter D1 Fixing Hole Distance Width B2 Height C2 Approval&Application Chars RoHS compliance UL certificate CSA certificate Short circuit Overload Noload EMI Environmental standard Product Data 40 (min), 55 (max) C 240.5 mm 224.6 mm 211.1 mm 59.1 mm 39.7 mm 4.8 mm 42.9 mm 37.7 mm Selflimited Protected Protected FCC 47 subpart 15; Class A UL Damp & Dry Order code 929000702502 Full product code 929000702502 Full product name Xitanium 100W 24V 4.1A 347480V Otd Order product name XITANIUM 100W 24V 4.1A 347480V OTD Pieces per pack 1 Packing configuration 10
Xitanium drivers outdoor Fixed (US) Packs per outerbox 10 Bar code on pack 50781087091628 EAN1 Bar code on 50781087091628 outerbox EAN3 Logistic code(s) 12NC Net weight per piece 929000702502 1.270 kg Dimensional drawing A2 C1 C2 B2 A4 B1 A1 Xitanium 100W 24V 4.1A 347480V Otd Product A1 (Norm) A2 (Norm) A3 (Norm) A4 (Norm) B1 (Norm) B2 (Norm) B3 (Norm) C1 (Norm) C2 (Norm) D1 (Norm) 100W 24V 4.1A 347480V Otd 240.5 224.6 211.1 59.1 42.9 39.7 37.7 4.8 2013 Koninklijke Philips N.V. (Royal Philips) All rights reserved. Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips N.V. (Royal Philips) or their respective owners. www.philips.com/lighting 2013, October 9 data subject to change
Driver EUV150SxxxST 20100531 H Green Power for Green Products Features Ultra High Efficiency (Up to 94%) High Power Factor (0.99 Typical) 150 W Continuous Output Power Lightning Protection AllRound Protection: OVP, OCP, SCP, OTP Waterproof (IP67) Comply With UL8750 & EN61347 Safety Regulations Description The EUV150SxxxST Series operate from a 90 ~ 305 Vac input range. These units will provide up to 150 W of output power and a maximum output current of 12.5 A for 12 V output model. They are designed to be highly efficient and highly reliable. Features include lightning protection, over voltage protection, over current protection, short circuit protection and over temperature protection. Models Output Voltage Input Voltage Max. Output Current Max. Output Power Typical Power Factor Efficiency (1) 110Vac 220Vac Model Number (2) 12 Vdc 90 ~ 305 Vac 12.5 A 150 W 92% 0.99 0.96 EUV150S012ST 24 Vdc 90 ~ 305 Vac 6.25 A 150 W 93% 0.99 0.96 EUV150S024ST 36 Vdc 90 ~ 305 Vac 4.17 A 150 W 93% 0.99 0.96 EUV150S036ST 40Vdc 90 ~ 305 Vac 3.75 A 150 W 93% 0.99 0.96 EUV150S040ST 42 Vdc 90 ~ 305 Vac 3.57 A 150 W 94% 0.99 0.96 EUV150S042ST 48 Vdc 90 ~ 305 Vac 3.13 A 150 W 93% 0.99 0.96 EUV150S048ST 50 Vdc 90 ~ 305 Vac 3.00 A 150 W 93% 0.99 0.96 EUV150S050ST 52 Vdc 90 ~ 305 Vac 2.88 A 150 W 93% 0.99 0.96 EUV150S052ST 54 Vdc 90 ~ 305 Vac 2.78 A 150 W 93% 0.99 0.96 EUV150S054ST 56 Vdc 90 ~ 305 Vac 2.68 A 150 W 93% 0.99 0.96 EUV150S056ST 81 Vdc 90 ~ 305 Vac 1.85 A 150 W 94% 0.99 0.96 EUV150S081ST 105 Vdc 90 ~ 305 Vac 1.42 A 150 W 94% 0.99 0.96 EUV150S105ST Notes: (1) Measured at full load and 220 Vac input. (2) A suffix xxxx may be added to denote variations or modifications to the base product, where x can be any alphanumeric character or blank. (3) : Popular model. Input Specifications Parameter Min. Typ. Max. Notes Input Voltage 90 V 305 V Input Frequency 47 Hz 63 Hz Leakage Current 1 ma At 277Vac 50Hz input Input AC Current 1.75 A Measured at full load and 100 Vac input. 0.8 A Measured at full load and 220 Vac input Inrush Current 65 A At 230Vac input 25 Cold Start Specifications are subject to changes without notice. www.inventronicsco.com Tel: 8657186632260 Fax: 8657186601139 sales@inventronicsco.com
Driver EUV150SxxxST 20100531 H Green Power for Green Products Output Specifications Parameter Min. Typ. Max. Notes Output Range V O = 12 V V O = 24 V V O = 36 V 11.40 V 22.80 V 34.20 V 12 V 24 V 36 V 12.60 V 25.20 V 37.80 V V O = 40 V V O = 42 V 38.00 V 39.90 V 40 V 42 V 42.00 V 44.10 V Measured at the end of output cable, including line, load and temperature O regulations. V O = 52 V 49.40 V 52 V 54.60 V V O = 48 V V = 50 V 45.60 V 47.50 V 48 V 50 V 50.40 V 52.50 V V O = 54 V V O = 56 V V O = 81 V V O = 105 V 51.30 V 53.20 V 76.95 V 99.75 V 54 V 56 V 81 V 105 V 56.70 V 58.80 V 85.05 V 110.25V Load Current V O = 12 V V O = 24 V V O = 36 V V O = 40 V V O = 42 V V O = 48 V V O = 50 V V O = 52 V V O = 54 V V O = 56 V V O = 81 V V O = 105 V 0 A 0 A 0 A 0 A 0 A 0 A 0 A 0 A 0 A 0 A 0 A 0 A 12.5 A 6.25 A 4.17 A 3.75 A 3.57 A 3.13 A 3.00 A 2.88 A 2.78 A 2.68 A 1.85 A 1.42 A Ripple and Noise (pkpk) 2% V O Measured by 20 MHz bandwidth oscilloscope and the output paralleled a 0.1 uf ceramic capacitor and a 10 uf electrolytic capacitor. Line Regulation 1% Load Regulation 2% Turnon Delay Time 0.6 S 1.0 S Measured at 110Vac input. 0.3 S 0.6 S Measured at 220Vac input. Output Overshoot / Undershoot 10% When power on or off. Load Dynamic Output Deviation 5% V O Response Settling Time 10 ms Note: All specifications are typical at 25 C unless otherwise stated. Protection Functions R/S: 1 A/ us Load: 25% ~ 75% full load. Parameter Min. Typ. Max. Notes Over Voltage Protection V O = 12 V V O = 24 V V O = 36 V V O = 40 V V O = 42 V V O = 48 V V O = 50 V V O = 52 V V O = 54 V V O = 56 V V O = 81 V V O =105 V 14 V 27 V 40 V 45 V 47 V 54 V 56 V 58 V 60 V 63 V 91 V 118 V 15 V 30 V 43 V 50 V 51 V 58 V 60 V 62 V 65 V 70 V 95 V 128 V 16 V 34 V 48 V 53 V 55 V 61 V 63 V 66 V 69 V 75 V 100 V 135 V Latch mode. The power supply shall return to normal operation only after the power is turnon again. Over Current Protection 110% I O 135% I O 180% I O selfrecovery when the fault condition is Hiccup mode. The power supply shall be removed. Over Temperature Protection 110 C Maximum temperature of components inside the case. Short Circuit Protection No damage shall occur when any output operating in a short circuit condition. The power supply shall be selfrecovery when the fault condition is removed. Specifications are subject to changes without notice. www.inventronicsco.com Tel: 8657186632260 Fax: 8657186601139 sales@inventronicsco.com
Driver EUV150SxxxST 20100531 H Green Power for Green Products General Specifications Parameter Min. Typ. Max. Notes Efficiency V O = 12 V V O = 24 V V O = 36 V V O = 40 V V O = 42 V V O = 48 V V O = 50 V V O = 52 V V O = 54 V V O = 56 V V O = 81 V V O = 105 V Efficiency V O = 12 V V O = 24 V V O = 36 V V O = 40 V V O = 42 V V O = 48 V V O = 50 V V O = 52 V V O = 54 V V O = 56 V V O = 81 V V O = 105 V No Load Power Dissipation MTBF Life Time Dimensions Inches (L W H) Millimeters (L W H) 88% 89% 89% 89% 89% 89% 89% 89% 89% 91% 92% 92% 92% 93% 92% 92% 92% 92% 92% 93% 93% 89% 91% 91% 91% 92% 93% 93% 93% 94% 93% 93% 93% 93% 93% 94% 94% 2 W 584,000 hours 74,000 hours 7.83 2.66 1.57 199 67.5 40 Net Weight 1000 g Measured at full load, 110Vac input, 25 ambient temperature, after the unit is thermally stabilized. It will be lower about 1%, if measured immediately after startup. Measured at full load, 220Vac input, 25 ambient temperature, after the unit is thermally stabilized. It will be lower about 1%, if measured immediately after startup. For 54V output model, measured at 110Vac input, 80%Load and 25 C ambient temperature (MILHDBK217F). For 54V output model, measured at 220Vac input, 80%Load and 45 C ambient temperature Note: All specifications are typical at 25 C unless otherwise stated. Environmental Specifications Parameter Min. Typ. Max. Notes Operating Temperature 35 +70 Humidity: 10% RH to 100% RH Storage Temperature 40 +85 Humidity: 5% RH to 100% RH Safety & EMC Compliance Safety Category Country Standard CUL USA & Canada UL8750 Compliance to UL1012 UL935, CAN/CSAC22.2 No. 0, CSAC22.2 No. 107.1, CSAC22.2 No. 250.0 CE Europe EN 613471, EN61347213 EMI Standards EN 55015 Notes Conducted emission Test & Radiated emission Test with 6 db margin Specifications are subject to changes without notice. www.inventronicsco.com Tel: 8657186632260 Fax: 8657186601139 sales@inventronicsco.com
Driver EUV150SxxxST 20100531 H Green Power for Green Products EMS Standards EN 6100032 EN 6100033 EN 6100042 EN 6100043 EN 6100044 EN 6100045 EN 6100046 EN 6100048 EN 61000411 EN 61547 Notes Harmonic current emissions Voltage fluctuations & flicker Electrostatic Discharge (ESD): 8 kv air discharge, 4 kv contact discharge RadioFrequency Electromagnetic Field Susceptibility TestRS Electrical Fast Transient / BurstEFT Surge Immunity Test: AC Power Line: line to line 2 kv, line to earth 4 kv Conducted Radio Frequency Disturbances TestCS Power Frequency Magnetic Field Test Voltage Dips Electromagnetic Immunity Requirements Applies to Lighting Equipment Derating Curve Derating Curve Derating Curve 100 100 80 80 Load(%) 60 40 Load(%) 60 40 20 20 0 35 20 5 10 25 40 55 70 Ambient Temperature( C) 0 90 120 150 180 210 240 270 300 330 Input Voltage(V) Mechanical Outline EUV150S012ST WHITE (ACN) BLACK (ACL) GREEN (GND) AC INPUT (3*AWG #18) DC OUTPUT (2*AWG #18) RED (V+) BLACK (V) RED (V+) BLACK (V) Note: The 2 DC output cables are connected in parallel internally because one AWG #18 wire can only carry 10A. Please connect the 2 red wires together and 2 black wires together in application, or ensure each cable carries same current. Specifications are subject to changes without notice. www.inventronicsco.com Tel: 8657186632260 Fax: 8657186601139 sales@inventronicsco.com
Driver EUV150SxxxST 20100531 H Green Power for Green Products Others WHITE (ACN) BLACK (ACL) GREEN (GND) AC INPUT (3*AWG #18) DC OUTPUT (2*AWG #18) RED (V+) BLACK (V) RoHS Compliance Our products comply with the European Directive 2002/95/EC, calling for the elimination of lead and other hazardous substances from electronic products. Revision History Change Date Rev. Description of Change Item From To 20090814 A Change Max. Output Current and Efficiency. 20090902 B Change MTBF and Life Time. 20090911 C Change Turnon Delay Time 20091015 D Delete UL1310 Class2 in Safety & EMC Compliance 20091110 E Change notes of efficiency. Change No Load Power Dissipation. 20091113 F Add the Mechanical Outline of 12V. 20091216 G Add note for mechanical outline. Add star rank for recommended models / : Popular model. 20100531 H Add Leakage Current in Input Specifications Standardize the tolerance in Mechanical Outline / / / Max. 1 ma At 277Vac 50Hz input Specifications are subject to changes without notice. www.inventronicsco.com Tel: 8657186632260 Fax: 8657186601139 sales@inventronicsco.com
150W Single Output Switching Power Supply H VG 150 series Features : Wide input range 180~528VAC Builtin active PFC function High efficiency up to 91.5% Protections: Short circuit / Over current / Over voltage / Over temperature Cooling by free air convection OCP point adjustable through output cable or internal potentiometer IP67 / IP65 design for indoor or outdoor installations Three in one dimming function (0~10Vdc or 10V PWM signal or resistance) Suitable for lighting and street lighting applications Compliance to worldwide safety regulations for lighting Suitable for dry / damp / wet locations 5 years warranty (Note.9) IP65 IP67 HVG15012 A A : IP65 rated. Output voltage and constant current level can be adjusted through internal potentiometer. B : IP67 rated. Constant current level adjustable through output cable with 0~10Vdc or 10V PWM signal or resistance. D (option) : IP67 rated. Timer dimming function, contact MEAN WELL for details. SPECIFICATION MODEL OUTPUT INPUT PROTECTION ENVIRONMENT SAFETY & EMC OTHERS NOTE DC VOLTAGE RATED CURRENT RATED POWER RIPPLE & NOISE (max.) Note.2 150mVpp VOLTAGE ADJ. RANGE Note.6 CURRENT ADJ. RANGE VOLTAGE TOLERANCE Note.3 LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD UP TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE POWER FACTOR (Typ.) Note.5 EFFICIENCY (Typ.) AC CURRENT 347VAC (Typ.) 480VAC INRUSH CURRENT (Typ.) LEAKAGE CURRENT OVER CURRENT SHORT CIRCUIT OVER VOLTAGE OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC IMMUNITY MTBF HVG15012 HVG15015 HVG15020 HVG15024 HVG15030 HVG15036 HVG15042 HVG15048 HVG15054 12V Can be adjusted by internal potentiometer A type only ±2.5% ±2.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±2.0% ±1.5% ±1.0% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% 2700ms, 80ms at full load 480VAC / 347VAC ; B type 3000ms, 280ms at 95% load 480VAC / 347VAC 18ms at full load 480VAC / 347VAC 180 ~ 528VAC 254VDC ~ 747VDC 47 ~ 63Hz PF 0.98/230VAC, PF 0.97/277VAC, PF 0.95/347VAC, PF 0.93/480VAC at full load (Please refer to "Power Factor Characteristic" curve) 87% 89% 90.5% 91% 91% 91% 91% 91.5% 91.5% 0.45A 0.35A <0.75mA / 480VAC 95 ~ 108% 15V 150mVpp 0.5A 0.38A Protection type : Constant current limiting, recovers automatically after fault condition is removed Constant current limiting, recovers automatically after fault condition is removed 14.4 ~ 16.8V 18 ~ 21V 23 ~ 27V 28 ~ 34V 34 ~ 38V 41 ~ 46V 47 ~ 53V 54 ~ 60V 59 ~ 65V Shut down o/p voltage, recovers automatically after temperature goes down 40 ~ +70 (Refer to "Derating Curve") 20 ~ 95% RH noncondensing 40 ~ +80, 10 ~ 95% RH ± 0.03%/ (0 ~ 60 ) 20V 150mVpp 10.8 ~ 13.5V 13.5 ~ 17V 17 ~ 22V 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes Note.7 UL8750, CSA C22.2 No. 250.008, IP65 or IP67 approved 158.6K hrs min. MILHDBK217F (25 ) 24V 30V 36V 42V 48V CONSTANT CURRENT REGION Note.4 7.2~12V 8.25~15V 11~20V 13.2~24V 16.5~30V 19.8~36V 23.1~42V 26.4~48V 29.7~54V EMC EMISSION 10A 10A 7.5A 6.25A 5A 4.17A 3.58A 3.13A 120W 150W 150W 150W 150W 150.12W 150.36W 150.24W 150mVpp 22 ~ 27V 200mVpp 27 ~ 33V 200mVpp 33 ~ 40V Protection type : Shut down o/p voltage with autorecovery or repower on to recovery 200mVpp 38 ~ 46V 200mVpp 43 ~ 53V DIMENSION 245*68*38.8mm (L*W*H) PACKING 1.24Kg; 12pcs/15.9Kg/0.78CUFT 1. All parameters NOT specially mentioned are measured at 347VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pairwire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Please refer to "DRIVING METHODS OF MODULE". 5. Derating may be needed under low input voltages. Please check the static characteristics for more details. 6. A type only. 7. Safety and EMC design refer to EN605981, CNS15233, GB7000.1. 8. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must requalify EMC Directive on the complete installation again. 9. Refer to warranty statement. 54V 200mVpp 49 ~ 58V 6 ~ 10A 5.5 ~ 10A 4.13 ~ 7.5A 3.44 ~ 6.25A 2.75 ~ 5A 2.29 ~ 4.17A 1.97 ~ 3.58A 1.72 ~ 3.13A 1.53 ~ 2.78A THD<20% when output loading 50% ( 60% only for 12V model) at 230VAC/277VAC/347VAC input TOTAL HARMONIC DISTORTION THD<20% when output loading 75% at 480VAC input COLD START 35A(t width=790 μs measured at 50% I peak) at 480VAC I/PO/P:3.75KVAC I/PFG:2KVAC O/PFG:0.5KVAC I/PO/P, I/PFG, O/PFG:100M Ohms / 500VDC / 25 / 70% RH 2.78A 150.12W ±1.0% ±0.5% ±0.5% Compliance to EN55015, EN6100032 Class C ( 55% load, 60% load only for 12V model ) ; EN6100033, FCC part 15 class B Compliance to EN6100042,3,4,5,6,8,11, EN61547, light industry level (surge 4KV), criteria A
150W Single Output Switching Power Supply HVG150 series Mechanical Specification Case No.994 Unit:mm A Type:(HVG150_A) 12 9.6 245 221 FG ( Gr een/yell ow) AC /L( Brown ) AC /N(Blue ) 300± 20 STW 18AWG 3C T case Vo AD J. 106.9 Io ADJ. 300± 20 SJTW 14AWG 2C V(B lack) +V(Red) ψ 4.2 4PL T case: Max. Case Temperature. IP65 rated. Output voltage and constant current level can be adjusted through internal potentiometer. (Can access by removing the rubber stopper on the case.) B Type:(HVG150_B) 245 12 221 FG ( Gr een/yell ow) AC /L( Brown ) AC /N(Blue ) 300± 20 STW 18AWG 3C 9.6 T case 106.9 300± 20 UL2517 18AWG 2C SJTW 14AWG 2C ψ 4.2 4PL DIM+(Blue) DIM(White) V(B lack) +V(Red) T case: Max. Case Temperature. D Type(option):(HVG150_D) 12 9.6 245 221 FG ( Gr een/yell ow) AC /L( Brown ) AC /N(Blue ) 300± 20 STW 18AWG 3C T case 106.9 300± 20 SJTW 14AWG 2C ψ 4.2 4PL V(B lack) +V(Red) T case: Max. Case Temperature. IP67 rated. Timer dimming function, contact MEAN WELL for details. File Name:HVG150SPEC 20131127
150W Single Output Switching Power Supply HVG150 series Block Diagram EMI FILTER I/P & RECTIFIERS FG PFC CIRCUIT PFC CONTROL O.L.P. O.T.P. POWER SWITCHING PWM & PFC CONTROL RECTIFIERS & FILTER DETECTION CIRCUIT O.V.P. O.L.P. PFC fosc : 130KHz PWM fosc : 70KHz +V V DIM+ DIM (B Type) Derating Curve Static Characteristics 100 80 Others 100 90 80 60 40 20 12V,15V 70 60 50 40 40 25 10 0 15 30 50 60 70 AMBIENT TEMPERATURE ( ) (HORIZONTAL) 180 200 347 440 480 528 INPUT VOLTAGE (V) 60Hz Power Factor Characteristic Constant Current Mode 1 0.98 0.96 0.94 0.92 0.9 0.88 0.86 0.84 0.82 0.8 0.78 50% 60% 70% 80% 100% 480V 347V 277V 230V LOAD (150W) File Name:HVG150SPEC 20131127
150W Single Output Switching Power Supply H VG150 series EFFICIENCY vs LOAD (48V Model) HVG150 series possess superior working efficiency that up to 91.5% can be reached in field applications. 95 90 85 80 75 70 480V 347V 277V 230V 65 10% 20% 30% 40% 50% 60% 70% 80% 100% LOAD DRIVING METHODS OF MODULE There are two major kinds of drive method "direct drive" and "with driver". A typical power supply may either work in "constant voltage mode (CV) or constant current mode (CC)" to drive the s. Mean Well's power supply with CV+ CC characteristic can be operated at both CV mode (with driver, at area (A) and CC mode (direct drive, at area (B). 100 50 (max.) (A) Constant Voltage area (B) Constant Current area In the constant current region, the highest voltage at the output of the driver depends on the configuration of the end systems. Should there be any compatibility issues, please contact MEAN WELL. 50 100 Io (%) Typical power supply IV curve File Name:HVG150SPEC 20131127
150W Single Output Switching Power Supply HVG150 series DIMMING OPERATION F G (Green/Yellow ) AC/L( Brown ) AC/N(Blue ) HVG150 DIM+(Blue) DIM(White) V(Black) +V(Red) Builtin 3 in 1 dimming function, IP67 rated. Output constant current level can be adjusted through output cable by connecting a resistance or 0 ~ 10Vdc or 10V PWM signal between DIM+ and DIM. Please DO NOT connect "DIM" to "V". Reference resistance value for output current adjustment (Typical) Single driver Resistance value Multiple drivers (N= driver quantity for synchronized dimming operation) Percentage of rated current 10KΩ 60KΩ 10K Ω/N 20K Ω/N 30K Ω/N 40K Ω/N 50K Ω/N 60K Ω/N 70K Ω/N 80K Ω/N 90K Ω/N 100K Ω/N 10% 60% 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V 10% 20KΩ 20% 20% 30KΩ 30% 0 ~ 10V dimming function for output current adjustment (Typical) Dimming value Percentage of rated current Duty value Percentage of rated current Short Short 0% 0V 0% 30% 40KΩ 40% 40% 50KΩ 10V PWM signal for output current adjustment (Typical): Frequency range :100Hz ~ 3KHz 0% 0% 10% 10% 20% 20% 30% 30% 40% 40% 50% 50% 50% 50% 60% 60% 60% 70KΩ 70% 70% 70% 70% 80KΩ 80% 80% 80% 80% 90KΩ 100KΩ 100% 100% 100% 100% OPEN 95%~108% OPEN 95%~108% OPEN 95%~108% WATERPROOF CONNECTION Waterproof connector Waterproof connector can be assembled on the output cable of HVG150 to operate in dry/wet/damp or outdoor environment. AC source I/P HVG150 O/P Size Pin Configuration (Female) Size Pin Configuration (Female) M12 Order No. Suitable Current 4PIN 5A/PIN M1204 10A max. 5PIN 5A/PIN M1205 10A max. M15 Order No. Suitable Current 2PIN 12A/PIN M1502 12A max. Lamp File Name:HVG150SPEC 20131127
150W Single Output Switching Power Supply HVG150 series Cable Joiner 66 26 20 CJ041 suitable for 14AWG~16AWG CJ042 suitable for 18AWG~22AWG Up to four wires can be connected through this cable joiner by soldering or clamping by tools. Lamp HVG150 O/P Wires CJ04 cable joiner can be purchased independently for user's own assembly. MEAN WELL order No. : CJ041, CJ042. Junction Box(Option ) 22 1 38 3 76 10 5 F G (Green/Yellow ) AC/L( Brown ) AC/N(Blue ) SJTW 18AWG 3C V(Bla ck) +V(R ed) SJT W 14 AWG 2C 2ψ 5 3 PF 1/2 " 15 0± 20 3 PF 1/2 " 15 0± 20 Optional junction box available for A type, please contact MEAW WELL for details. 86 File Name:HVG150SPEC 20131127