Rev. 8 8 March 205 Product data sheet. Product profile. General description, encapsulated in small Surface-Mounted Device (SMD) plastic packages. Table. Product overview Type number Package Package Configuration Nexperia JEITA JEDEC configuration BAV70 SOT2 - TO-26AB small dual common cathode BAV70M SOT88 SC-0 - leadless ultra dual common cathode small BAV70S SOT6 SC-88 - very small quadruple common cathode/common cathode BAV70T SOT46 SC-75 - ultra small dual common cathode BAV70W SOT2 SC-70 - very small dual common cathode.2 Features and benefits High switching speed: t rr 4 ns Low capacitance: C d.5 pf Low leakage current Reverse voltage: V R 00 V Small SMD plastic packages AEC-Q0 qualified. Applications High-speed switching General-purpose switching.4 Quick reference data Table 2. Quick reference data Symbol Parameter Conditions Min Typ Max Unit Per diode I R reverse current V R = 80 V - - 0.5 A V R reverse voltage - - 00 V t rr reverse recovery time [] - - 4 ns [] When switched from I F = 0 ma to I R = 0 ma; R L = 00 ; measured at I R = ma.
2. Pinning information Table. Pinning Pin Description Simplified outline Symbol BAV70; BAV70T; BAV70W anode (diode ) 2 anode (diode 2) common cathode 2 006aaa44 2 006aab04 BAV70M anode (diode ) 2 anode (diode 2) common cathode 2 Transparent top view 2 006aab04 BAV70S anode (diode ) 2 anode (diode 2) 6 5 4 6 5 4 common cathode (diode and diode 4) 4 anode (diode ) 2 5 anode (diode 4) 2 6 common cathode (diode and diode 2) 006aab04. Ordering information Table 4. Ordering information Type number Package Name Description Version BAV70 - plastic surface-mounted package; leads SOT2 BAV70M SC-0 leadless ultra small plastic package; solder lands; SOT88 body.0 0.6 0.5 mm BAV70S SC-88 plastic surface-mounted package; 6 leads SOT6 BAV70T SC-75 plastic surface-mounted package; leads SOT46 BAV70W SC-70 plastic surface-mounted package; leads SOT2 Product data sheet Rev. 8 8 March 205 2 of 6
4. Marking 5. Limiting values Table 5. Marking codes Type number Marking code [] BAV70 A4* BAV70M S4 BAV70S A4* BAV70T A4 BAV70W A4* [] * = -: made in Hong Kong * = p: made in Hong Kong * = t: made in Malaysia * = W: made in China Table 6. Limiting values In accordance with the Absolute Maximum Rating System (IEC 604). Symbol Parameter Conditions Min Max Unit Per diode V RRM repetitive peak reverse - 00 V voltage V R reverse voltage - 00 V I F forward current BAV70 T amb 25 C - 25 ma BAV70M T s = 90 C - 50 ma BAV70S T s = 60 C - 250 ma BAV70T T s = 90 C - 50 ma BAV70W T amb 25 C - 75 ma I FRM repetitive peak forward current BAV70-450 ma BAV70M - 500 ma BAV70S - 450 ma BAV70T - 500 ma BAV70W - 500 ma I FSM non-repetitive peak forward square wave [] current t p = s - 4 A t p = ms - A t p = s - 0.5 A Product data sheet Rev. 8 8 March 205 of 6
[] T j = 25 C prior to surge. 6. Thermal characteristics Table 6. Limiting values continued In accordance with the Absolute Maximum Rating System (IEC 604). Symbol Parameter Conditions Min Max Unit P tot total power dissipation [2] BAV70 T amb 25 C - 250 mw BAV70M T amb 25 C [] - 250 mw BAV70S T s = 60 C - 50 mw BAV70T T s = 90 C - 70 mw BAV70W T amb 25 C - 200 mw Per device I F forward current BAV70 T amb 25 C - 25 ma BAV70M T s = 90 C - 75 ma BAV70S T s = 60 C - 00 ma BAV70T T s = 90 C - 75 ma BAV70W T amb 25 C - 00 ma T j junction temperature - 50 C T amb ambient temperature 65 +50 C T stg storage temperature 65 +50 C [2] Device mounted on an FR4 Printed-Circuit Board (PCB), single-sided copper, tin-plated and standard footprint. [] Reflow soldering is the only recommended soldering method. Table 7. Thermal characteristics Symbol Parameter Conditions Min Typ Max Unit Per diode R th(j-a) thermal resistance from junction to ambient in free air [] BAV70 - - 500 K/W BAV70M [2] - - 500 K/W BAV70W - - 625 K/W R th(j-t) thermal resistance from junction to tie-point BAV70 - - 60 K/W BAV70W - - 00 K/W R th(j-sp) thermal resistance from junction to solder point BAV70S - - 255 K/W BAV70T - - 50 K/W [] Device mounted on an FR4 PCB, single-sided copper, tin-plated and standard footprint. [2] Reflow soldering is the only recommended soldering method. Product data sheet Rev. 8 8 March 205 4 of 6
7. Characteristics Table 8. Characteristics T amb = 25 C unless otherwise specified. Symbol Parameter Conditions Min Typ Max Unit Per diode V F forward voltage [] I F = ma - - 75 mv I F = 0 ma - - 855 mv I F = 50 ma - - V I F = 50 ma - -.25 V I R reverse current V R = 25 V - - 0 na V R = 80 V - - 0.5 A V R = 25 V; T j = 50 C - - 0 A V R = 80 V; T j = 50 C - - 00 A C d diode capacitance V R = 0 V; f = MHz - -.5 pf t rr reverse recovery time [2] - - 4 ns V FR forward recovery voltage [] - -.75 V [] Pulse test: t p 00 s; 0.02. [2] When switched from I F = 0 ma to I R = 0 ma; R L = 00 ; measured at I R = ma. [] When switched from I F = 0 ma; t r = 20 ns. Product data sheet Rev. 8 8 March 205 5 of 6
0 006aab07 0 2 mbg704 I F (ma) 0 2 I FSM (A) 0 0 () (2) () (4) 0 0.2 0.6.0.4 V F (V) 0 0 0 2 0 0 4 t p (μs) () T amb = 50 C (2) T amb = 85 C () T amb = 25 C (4) T amb = 40 C Fig. Forward current as a function of forward voltage; typical values Fig 2. Based on square wave currents. T j = 25 C; prior to surge Non-repetitive peak forward current as a function of pulse duration; maximum values 0 2 I R (μa) 0 () 006aab08 0.8 C d (pf) mbg446 (2) 0.6 0 0 2 () 0.4 0 0.2 0 4 (4) 0 5 0 20 40 60 80 00 V R (V) 0 0 4 8 2 6 V R (V) () T amb = 50 C (2) T amb = 85 C () T amb = 25 C (4) T amb = 40 C Fig. Reverse current as a function of reverse voltage; typical values Fig 4. f = MHz; T amb = 25 C Diode capacitance as a function of reverse voltage; typical values Product data sheet Rev. 8 8 March 205 6 of 6
8. Test information R S = 50 Ω I F D.U.T. SAMPLING OSCILLOSCOPE t r t p t 0 % + I F trr t V = V R + I F R S R i = 50 Ω mga88 V R 90 % input signal output signal () () I R = ma Input signal: reverse pulse rise time t r = 0.6 ns; reverse voltage pulse duration t p = 00 ns; duty cycle = 0.05 Oscilloscope: rise time t r = 0.5 ns Fig 5. Reverse recovery time test circuit and waveforms I kω 450 Ω I 90 % V R S = 50 Ω D.U.T. OSCILLOSCOPE R i = 50 Ω VFR 0 % t r t p t t input signal output signal mga882 Input signal: forward pulse rise time t r = 20 ns; forward current pulse duration t p 00 ns; duty cycle 0.005 Fig 6. Forward recovery voltage test circuit and waveforms 8. Quality information This product has been qualified in accordance with the Automotive Electronics Council (AEC) standard Q0 - Stress test qualification for discrete semiconductors, and is suitable for use in automotive applications. Product data sheet Rev. 8 8 March 205 7 of 6
9. Package outline.0 2.8. 0.9 0.62 0.55 0.55 0.47 0.50 0.46 0.45 0.5 0.0 0.22 2.5 2..4.2 0.65.02 0.95 2 0.0 0.22 2.9 0.48 0.8 0.5 0.09 04--04 0.20 0.2 0.5 0-04-0 Fig 7. Package outline BAV70 (SOT2/TO-26AB) Fig 8. Package outline BAV70M (SOT88/SC-0) 2.2.8. 0.8.8.4 0.95 0.60 6 5 4 0.45 0.5 0.45 0.5 2.2 2.0.5.5 pin index.75.45 0.9 0.7 2 0. 0.65 0.2. 0.25 0.0 2 4-0-0 04--04 0.0 0.5 0.25 0.0 Fig 9. Package outline BAV70S (SOT6/SC-88) Fig 0. Package outline BAV70T (SOT46/SC-75) 2.2.8. 0.8 0.45 0.5 2.2 2.0.5.5 2. 0.4 0. 0.25 0.0 04--04 Fig. Package outline BAV70W (SOT2/SC-70) Product data sheet Rev. 8 8 March 205 8 of 6
0. Packing information. Soldering Table 9. Packing methods The indicated -xxx are the last three digits of the 2NC ordering code. [] Type number Package Description Packing quantity 000 0000 BAV70 SOT2 4 mm pitch, 8 mm tape and reel -25-25 BAV70M SOT88 2 mm pitch, 8 mm tape and reel - -5 BAV70S SOT6 4 mm pitch, 8 mm tape and reel; T [2] -5-5 4 mm pitch, 8 mm tape and reel; T2 [] -25-65 BAV70T SOT46 4 mm pitch, 8 mm tape and reel -5-5 BAV70W SOT2 4 mm pitch, 8 mm tape and reel -5-5 [] For further information and the availability of packing methods, see Section 4. [2] T: normal taping [] T2: reverse taping. 2.9.9 solder lands.7 2 solder resist solder paste 0.7 ( ) 0.6 ( ) occupied area 0.5 ( ) 0.6 ( ) sot02_fr Fig 2. Reflow soldering footprint BAV70 (SOT2/TO-26AB) Product data sheet Rev. 8 8 March 205 9 of 6
.2 (2 ) 2.2.4 (2 ) solder lands 4.6 2.6 solder resist occupied area.4 preferred transport direction during soldering 2.8 4.5 sot02_fw Fig. Wave soldering footprint BAV70 (SOT2/TO-26AB). 0.7 R0.05 (2 ) solder lands 0.9 0.6 0.7 solder resist 0.25 (2 ) solder paste occupied area 0. (2 ) 0.4 (2 ) 0. 0.4 sot88_fr Reflow soldering is the only recommended soldering method. Fig 4. Reflow soldering footprint BAV70M (SOT88/SC-0) Product data sheet Rev. 8 8 March 205 0 of 6
2.65 solder lands 2.5.5 0.6 0.5 0.4 (2 ) (4 ) (4 ) solder resist solder paste 0.5 (4 ) 0.6 (2 ) occupied area 0.6 (4 ).8 sot6_fr Fig 5. Reflow soldering footprint BAV70S (SOT6/SC-88).5 solder lands 4.5 0. 2.5 solder resist.5 occupied area.. preferred transport direction during soldering 2.45 5. sot6_fw Fig 6. Wave soldering footprint BAV70S (SOT6/SC-88) Product data sheet Rev. 8 8 March 205 of 6
0.6 2.2 0.7. 2 2.0 0.85 0.5 (x).5 0.6 (x).9 solder lands solder resist msa48 solder paste occupied area Fig 7. Reflow soldering footprint BAV70T (SOT46/SC-75) 2.65 0.75.0.25 2.5 0.85 0.60 ( ) 2 0.50 ( ).90 solder lands solder paste solder resist occupied area 0.55 ( ) 2.40 msa429 Fig 8. Reflow soldering footprint BAV70W (SOT2/SC-70) 4.60 4.00.5 2.65 2.0 2.70 solder lands preferred transport direction during soldering 0.90 (2 ) solder resist occupied area msa49 Fig 9. Wave soldering footprint BAV70W (SOT2/SC-70) Product data sheet Rev. 8 8 March 205 2 of 6
2. Revision history Table 0. Revision history Document ID Release date Data sheet status Change notice Supersedes v.8 20508 Product data sheet - _7 Modifications: The format of this data sheet has been redesigned to comply with the new identity guidelines of NXP Semiconductors. Legal texts have been adapted to the new company name where appropriate. _7 200727 Product data sheet - BAV70_6 BAV70S_2 BAV70T_ BAV70W_6 BAV70_6 2002040 Product specification - BAV70_5 BAV70S_2 99702 Product specification - BAV70S_ BAV70T_ 20040204 Product specification - BAV70T_2 BAV70W_6 20020405 Product specification - BAV70W_5 Product data sheet Rev. 8 8 March 205 of 6
. Legal information. Data sheet status Document status [][2] Product status [] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification. [] Please consult the most recently issued document before initiating or completing a design. [2] The term short data sheet is explained in section Definitions. [] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nexperia.com..2 Definitions Draft The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. Nexperia does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local Nexperia sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail. Product specification The information and data provided in a Product data sheet shall define the specification of the product as agreed between Nexperia and its customer, unless Nexperia and customer have explicitly agreed otherwise in writing. In no event however, shall an agreement be valid in which the Nexperia product is deemed to offer functions and qualities beyond those described in the Product data sheet.. Disclaimers Limited warranty and liability Information in this document is believed to be accurate and reliable. However, Nexperia does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Nexperia takes no responsibility for the content in this document if provided by an information source outside of Nexperia. In no event shall Nexperia be liable for any indirect, incidental, punitive, special or consequential damages (including - without limitation - lost profits, lost savings, business interruption, costs related to the removal or replacement of any products or rework charges) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. Notwithstanding any damages that customer might incur for any reason whatsoever, Nexperia s aggregate and cumulative liability towards customer for the products described herein shall be limited in accordance with the Terms and conditions of commercial sale of Nexperia. Right to make changes Nexperia reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use in automotive applications This Nexperia product has been qualified for use in automotive applications. Unless otherwise agreed in writing, the product is not designed, authorized or warranted to be suitable for use in life support, life-critical or safety-critical systems or equipment, nor in applications where failure or malfunction of a Nexperia product can reasonably be expected to result in personal injury, death or severe property or environmental damage. Nexperia and its suppliers accept no liability for inclusion and/or use of Nexperia products in such equipment or applications and therefore such inclusion and/or use is at the customer's own risk. Applications Applications that are described herein for any of these products are for illustrative purposes only. Nexperia makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Customers are responsible for the design and operation of their applications and products using Nexperia products, and Nexperia accepts no liability for any assistance with applications or customer product design. It is customer s sole responsibility to determine whether the Nexperia product is suitable and fit for the customer s applications and products planned, as well as for the planned application and use of customer s third party customer(s). Customers should provide appropriate design and operating safeguards to minimize the risks associated with their applications and products. Nexperia does not accept any liability related to any default, damage, costs or problem which is based on any weakness or default in the customer s applications or products, or the application or use by customer s third party customer(s). Customer is responsible for doing all necessary testing for the customer s applications and products using Nexperia products in order to avoid a default of the applications and the products or of the application or use by customer s third party customer(s). Nexperia does not accept any liability in this respect. Limiting values Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 604) will cause permanent damage to the device. Limiting values are stress ratings only and (proper) operation of the device at these or any other conditions above those given in the Recommended operating conditions section (if present) or the Characteristics sections of this document is not warranted. Constant or repeated exposure to limiting values will permanently and irreversibly affect the quality and reliability of the device. Terms and conditions of commercial sale Nexperia products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nexperia.com/profile/terms unless otherwise agreed in a valid written individual agreement. In case an individual agreement is concluded only the terms and conditions of the respective agreement shall apply. Nexperia hereby expressly objects to applying the customer s general terms and conditions with regard to the purchase of Nexperia products by customer. Product data sheet Rev. 8 8 March 205 4 of 6
No offer to sell or license Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. Quick reference data The Quick reference data is an extract of the product data given in the Limiting values and Characteristics sections of this document, and as such is not complete, exhaustive or legally binding. Export control This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from competent authorities. Translations A non-english (translated) version of a document is for reference only. The English version shall prevail in case of any discrepancy between the translated and English versions..4 Trademarks Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. 4. Contact information For more information, please visit: http://www.nexperia.com For sales office addresses, please send an email to: salesaddresses@nexperia.com Product data sheet Rev. 8 8 March 205 5 of 6
5. Contents Product profile........................... General description......................2 Features and benefits..................... Applications............................4 Quick reference data.................... 2 Pinning information...................... 2 Ordering information..................... 2 4 Marking................................ 5 Limiting values.......................... 6 Thermal characteristics.................. 4 7 Characteristics.......................... 5 8 Test information......................... 7 8. Quality information...................... 7 9 Package outline......................... 8 0 Packing information..................... 9 Soldering.............................. 9 2 Revision history........................ Legal information....................... 4. Data sheet status...................... 4.2 Definitions............................ 4. Disclaimers........................... 4.4 Trademarks........................... 5 4 Contact information..................... 5 5 Contents.............................. 6 For more information, please visit: http://www.nexperia.com For sales office addresses, please send an email to: salesaddresses@nexperia.com Date of release: 8 March 205
Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: NXP: BAV70,25 BAV70M,5 BAV70S,5 BAV70S,5 BAV70,25 BAV70T,5 BAV70W,5 BAV70W,5