GORETM Mini-CP Internally Ruggedized Cable Assemblies for Microwave & RF Test STABLE, DURABLE, PRECISE
In 1958, W. L. Gore & Associates was founded with the mission to develop new capabilities GORE TM Mini-CP Internally Ruggedized Microwave Cable Assemblies are available in three common connection types, in addition to customized configurations: based on fluorocarbon polymers, especially polytetrafluoroethylene SMA (PTFE) and expanded polytetrafluoroethylene (eptfe). For over 50 years, Gore continues to create innovative, standardsetting products that are revolutionary in their effect. Gore products cross a variety of industries Precision N from high-performance fabrics used in the most hostile environments, to stent grafts that repair threatening aneurysms inside the human body, to electronic components used in outer space exploration. 7/16 Gore builds our heritage by developing innovative products, that perform in the harshest conditions, and meet rigorous, fitnessfor-use testing.
The Gore Advantage Reduce Your Total Cost of Test GORE Mini-CP Internally Ruggedized Cable Assemblies for Microwave & RF Test are a reliable solution for production testing of RF components, devices, and modules as well as system test. Due to the unique, internally ruggedized coaxial structure and robust connector termination, GORE Mini- CP Internally Ruggedized Cable Assemblies offer excellent durability and repeatability while remaining lightweight and flexible. The superior service-life reduces the measurements, such as: Base station module tuning and validation RF production test Electromagnetic compliance testing Wireless telecommunications module testing Automated test equipment (ATE) Vector Network Analyzers (VNAs) Bench test systems need for periodic replacement and lowers the overall cost of test. GORE Mini- CP Internally Ruggedized Cable Assemblies provide you peace of mind when reliable and repeatable measurement and equipment uptime are critical. Maximize Your System Performance When failure is not an option... GORE TM Microwave Cable Assemblies are durable, precise, and stable for accurate, reliable and repeatable measurement. Gore s Fitness-For-Use Testing Commitment Engineers today face increasing challenges when designing electronic devices for consumer, military, or business markets. As these devices become more complex, performance becomes critical. The Gore Signal Integrity Lab is a centralized, fitness-for-use analysis and Gore is a leading supplier of state-of-the-art, highperformance cable and terminated cable assemblies for microwave/rf and high speed digital applications. GORE Mini-CP Internally Ruggedized Cable Assemblies are designed to perform in the harshest environments and are ideal for use in applications that require stable and precise microwave/rf evaluation resource used to develop highperformance interconnects for the electronics industry. The Lab provides a state-of-the-art facility specializing in: Digital and microwave signal analysis Environmental and stress testing Electromagnetic compatibility
General Features and Benefits Features Industry leading electrical performance Precise, stable and repeatable measurements Excellent phase and amplitude stability Low insertion loss, return loss/vswr Precision phase matching available Extended thermal cycling or vacuum/outgassing compliance options available Unique, internally ruggedized cable design Braided Jacket Outer Binder Torque Resistant Braid Crush Protection Member Excellent durability Crush, torque & kink resistant Extremely flexible Light weight Minimum bend radius to 1.0 (25.4mm) Benefits Improve test accuracy Eliminate false readings and improve product yield rate Increase test calibration intervals Lengthen service life Minimize equipment downtime Decrease total test cost Reduce on-hand spare parts inventory Inner Jacket Inner Braid Outer Conductor GORE TM eptfe Dielectric Center Conductor FLEXIBILITY GORE Mini-CP Internally Ruggedized Cable Assemblies are highly flexible; yet do not suffer from the typical performance degradation associated with flexing semi-rigid and traditionally designed flexible assemblies. The internally ruggedized design allows for a 1 in. (25.4 mm) minimum bend radius for these assemblies without affecting cable performance and springback is virtually zero. RUGGEDIZATION We flexed the GORE Mini-CP Internally Ruggedized Cable Assemblies 90 degrees then reverse bent them 180 degrees. The stranded center conductor cables performed beyond 25,000 cycles (50,000 bends). The same assemblies were then torqued 10,000 times, 5,000 clockwise and 5,000 counterclockwise. The assemblies still met specification.
Connector and Cable Options GORE TM Mini-CP Internally Ruggedized Cable Assemblies for Microwave & RF Test Connector Options Connector Part # 0S 0X SMA: (18 GHz max. frequency) Straight Pin Straight Socket Right Angle Pin R01 R02 R71 Precision N: (18 GHz max. frequency) Straight Pin Straight Socket Right Angle Pin ZKU ZKV Q71 7/16: (7 GHz max. frequency) Straight Pin Straight Socket ZLY ZLZ Cable Options Center Conductor Stranded Solid Insertion Loss Typical @ 18 GHz: db/ft (db/m) 0.397 (1.3) 0.324 (1.06) Nominal Outer Diameter: Inches (mm) 0.305 (7.7) 0.305 (7.7) Nominal Weight: g/ft (g/m) 45 (147.6) 45 (147.6) Minimum Bend Radius: Inches (mm) 1.00 (25.4) 1.00 (25.4) Continuous Wave Power @ 18 GHz: Watts (Watts) 94 104 Cable Types 0S 0X Other connector and cable types are available on request.
Standard Part Numbers Standard Part Numbers Assembly Connector Connector Assembly Typical Insertion Loss P/N A B Length @ 2 GHz @ 6 GHz @ 12 GHz @ 18 GHz 0SR01R01024.0 SMA Pin SMA Pin 24 in. (0.6m) -0.29 db -0.51 db -0.76 db -0.96 db 0SR01R01036.0 SMA Pin SMA Pin 36 in. (0.9m) -0.41 db -0.73 db -1.08 db -1.35 db 0SR01ZKU036.0 SMA Pin Precision N Pin 36 in. (0.9m) -0.41 db -0.73 db -1.08 db -1.35 db 0SR01ZKU048.0 SMA Pin Precision N Pin 48 in. (1.2m) -0.53 db -0.95 db -1.38 db -1.75 db 0SR01ZKU060.0 SMA Pin Precision N Pin 60 in. (1.5m) -0.65 db -1.16 db -1.70 db -2.15 db 0SZKUZKU036.0 Precision N Pin Precision N Pin 36 in. (0.9m) -0.41 db -0.73 db -1.08 db -1.35 db 0SZKUZKU048.0 Precision N Pin Precision N Pin 48 in. (1.2m) -0.53 db -0.95 db -1.38 db -1.75 db 0SZKUZKU060.0 Precision N Pin Precision N Pin 60 in. (1.5m) -0.65 db -1.16 db -1.70 db -2.15 db Velocity of Propagation: 85% Center Conductor: Stranded Minimum Bend Radius: 1.0 in. (25.4mm) Outer Diameter: 0.305 in. (7.7mm) Nominal Cable Weight: 147.6 g/m Temperature Range: -55 o C to +150 o C Common Cable Lengths Standard Part Number Naming Convention Inches 12.0 20.0 24.0 36.0 39.4 48.0 60.0 72.0 78.7 96.0 120.0 156.0 180.0 197.0 240.0 276.0 300.0 312.0 348.0 396.0 Meters 0.3 0.5 0.6 0.9 1.0 1.2 1.5 1.8 2.0 2.4 3.0 4.0 4.5 5.0 6.0 7.0 7.5 8.0 9.0 10.0 1 2 3 4 5 6 7 8 9 10 11. 12 Cable Type Connector A Connector B Assembly Length in Inches 1. Prefix characters 1 and 2 define the cable type (0S, 0X, etc.), refer to the Cable Options table. 2. Characters 3, 4, and 5 define connector A used on one end of the assembly. Characters 6, 7, and 8 define connector B used on the second end of the assembly. To determine these characters, refer to the Connector Options table. 3. Characters 9, 10, 11, and 12 define the assembly length in inches and tenths. Lengths requiring only one or two digits (6 or 36 inches, for example) should be preceded by zeros in the unused positions (006, 036). If your length is a whole-inch increment, a 0 should be placed in position 12. For quick delivery of assemblies, select one of our standard assembly lengths of 24, 36, 48 or 60 inches; custom assembly lengths are available upon request, please consult Gore. For example, P/N 0SR01ZKU048.0 stands for SMA straight pin to Precision N straight pin, 48-inch long 0S type Gore Mini-CP Internally Ruggedized Microwave Cable Assembly. Short lead times available; please contact Gore.
Performance Charts Performance based on connectorized assemblies. 2.00 VSWR 0.0 Insertion Loss 1.90 1.80-0.5 Maximum VSWR 1.70 1.60 1.50 1.40 1.30 Typical Insertion Loss (db) -1.0-1.5 u 24-inch Assemblies u 36-inch Assemblies 1.20 1.10-2.0 u 48-inch Assemblies u 60-inch Assemblies 1.00 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 Frequency (GHz) -2.5 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 Frequency (GHz) 0.080 Amplitude Stability with Flexure 2.0 Phase Change with Flexure & Return 0.060 1.5 Typical Change in Amplitude (db) 0.040 0.020 0.000-0.020-0.040-0.060 Typical Phase Change (Degrees) 1.0 0.5 0.0-0.5-1.0-1.5 u Return u Flexure -0.080 0 2 4 5 6 8 10 12 14 16 18 20 Frequency (GHz) -2.0 0 2 4 6 8 10 12 14 16 18 20 Frequency (GHz)
The Gore Promise Our Products Do What We Say They ll Do Reduced Program Risk Gore has developed and proven a wide range of products specifically tailored to the microwave industry. With an unmatched history in demanding environments, rest assured that Gore will provide reliable products necessary to meet your individual system requirements. Gore s strong leadership position in innovative new product development, fitnessfor-use testing, global manufacturing and engineering design support, add up to a company with a rich heritage of program success. Gore Partners With Our Customers for Success Gore provides unparalleled engineering support throughout the design and manufacturing cycles. Gore s Microwave/ RF Product Team and Gore s Signal Integrity Laboratory offer world-class expertise in digital and microwave signal analysis, electromagnetic compatibility, environmental and stress testing. We view ourselves as an extension of our customers design teams, partnering with them to help to Gore Guarantee Unless otherwise specified, every GORE Mini-CP Internally Ruggedized Cable Assembly is 100% tested, and certified to meet the acceptance requirements contained in all applicable specifications, whether stated in this brochure or in Our quantitative, fitness-for-use testing ensures that our products do what we say they ll do the first time, every time. pre-approved customer contracts. Each assembly is guaranteed to meet those requirements and to be free make products faster, better, and more cost-effective. If you need information on a product not found in this brochure, please contact Gore. Gore s dedicated engineering and sales team stands ready to tailor a microwave/rf coaxial assembly to meet your application requirements. from defects in materials and/or workmanship at time of delivery. Defect or failure claims may be filed under warranty, up to one year beyond the original shipment date. Visit gore.com to use our On-line Builder and learn more about GORE TM Mini-CP Internally Ruggedized Cable Assemblies or call us at 1 (800) 445-GORE (4673) or at (302) 292-5100.
GORETM Mini-CP Internally Ruggedized Cable Assemblies for Microwave & RF Test STABLE, DURABLE, PRECISE Worldwide Sales and Support Contact Information China: Beijing +86 10 6510 2980 China: Shanghai +86 21 6247 1999 China: Shenzhen +86 755 8359 8262 Germany +49 9144 6010 India +65 6 733 2882 International +1 302 292 5100 Japan +81 3 3570 8712 Korea +82 2 393 3411 North America 1 800 445 4673 Singapore and ASEAN +65 6 733 2882 Taiwan +886 2 8771 7799 United Kingdom +44 1382 561511 GORE and designs are trademarks of W. L. Gore & Associates, Inc. 2009 W. L. Gore & Associates, Inc. W. L. Gore & Associates, Inc. 385 Starr Road, Landenberg, PA 19350 1 (800) 445-GORE (4673) www.gore.com