EUK075SxxxDV/TV Features High Efficiency (Up to 90.5%) Full Power at Wide Output Current Range (Constant Power) 010V/10V PWM Dimmable (DV models) 3 Timer Modes Dimmable (TV models) Input Surge Protection: 6kV lineline, 10kV lineearth AllAround Protection: OVP, SCP, OTP Waterproof (IP67) SELV Output Suitable for Independent Use 5 Years Warranty Description The EUK075SxxxDV/TV series is a 75W, constantcurrent, programmable IP67 LED driver that operates from 90305 Vac input with excellent power factor. It is created for low bay, tunnel and street lights. The high efficiency of these drivers and compact metal case enables them to run cooler, significantly improving reliability and extending product life. To ensure troublefree operation, protection is provided against input surge, output over voltage, short circuit, and over temperature. Models Adjustable Output Current Range FullPower Current Range (1) Default Output Current Input Voltage Range(2) Output Voltage Range Max. Typical Power Factor Output Efficiency Power (3) 120Vac 220Vac Model Number 45700mA 450700mA 90~305 Vac/ 530 ma 54~167Vdc 127~250 Vdc 75 W 90.5% 0.98 0.96 EUK075S070DV/TV 90~305 Vac/ 701050mA 7001050mA 700 ma 36~107Vdc 127~250 Vdc 75 W 90.0% 0.98 0.96 EUK075S105DV/TV(4) 90~305 Vac/ 1191750mA 11901750mA 1400 ma 22 ~ 63Vdc 127~250 Vdc 75 W 90.0% 0.98 0.96 EUK075S175DV/TV(4) 90~305 Vac/ 1902800mA 19002800mA 2100 ma 14 ~ 39Vdc 127~250 Vdc 75 W 88.5% 0.98 0.96 EUK075S280DV/TV(4) Notes: (1) Output current range with constant power at 75W (2) Certified voltage range: 100240Vac or 127250Vdc (except CCC, PSE, KS and BIS) (3) Measured at full load and 220Vac input (see below General Specifications for details). (4) SELV Output. 1 / 12 www.inventronicsco.com Tel: 8657156565800 Fax: 8657186601139 sales@inventronicsco.com
EUK075SxxxDV/TV 180 150 EUK075S070DV/TV (45,167) (293,167) (450,167) (10%Ioset,75/Ioset) (Ioset,75/Ioset) IV Operating Area EUK075S105DV/TV 120 90 65%Load 100%Load (700,107) 60 (10%Ioset,37.5/Ioset) (Ioset,37.5/Ioset) (700,70) (700,54) 30 Good Performance Area Allowed Operating Area Programmed Operating Area 0 0 140 280 420 560 700 840 Output Current (ma) Note: 450mA Ioset 700mA EUK075S175DV/TV EUK075S280DV/TV Input Specifications Parameter Min. Typ. Max. Notes Input Voltage 90 Vac 305 Vac 127~250 Vdc Input Frequency 47 Hz 63 Hz Leakage Current 0.70 ma IEC605981; 240Vac/ 60Hz Input AC Current Inrush Current(I 2 t) 0.25 A 2 s PF 0.9 THD 20% THD 8% 0.8 A Measured at full load and 120 Vac input. 0.40 A Measured at full load and 220 Vac input. At 220Vac input, 25 C cold start, duration=112 us, 10%Ipk10%Ipk. See Inrush Current Waveform for the details At 100240Vac, 5060Hz, 65%100%Load (4975W) At 220240Vac, 5060Hz, 80%100%Load (6075W) 2 / 12 www.inventronicsco.com Tel: 8657156565800 Fax: 8657186601139 sales@inventronicsco.com
EUK075SxxxDV/TV Output Specifications Parameter Min. Typ. Max. Notes Output Current Tolerance 5%Ioset 5%Ioset At full load condition Output Current Setting(Ioset) Range EUK075S070DV/TV EUK075S105DV/TV EUK075S175DV/TV EUK075S280DV/TV Output Current Setting Range with Constant Power EUK075S070DV/TV EUK075S105DV/TV EUK075S175DV/TV EUK075S280DV/TV Total Output Current Ripple (pkavg) 45 ma 70 ma 119 ma 190 ma 450 ma 700 ma 1190 ma 1900 ma 700 ma 1050 ma 1750 ma 2800 ma 700 ma 1050 ma 1750 ma 2800 ma 50%Iomax 100%Iomax At full load condition. 20 MHz BW Startup Overshoot Current 10%Iomax At full load condition No Load Output Voltage EUK075S070DV/TV EUK075S105DV/TV EUK075S175DV/TV EUK075S280DV/TV 200 V 119 V 78 V 59 V Line Regulation ±5.0% Measured at full load Load Regulation ±5.0% Turnon Delay Time 1.0 s 0.5 s Temperature Coefficient of Ioset Note: All specifications are typical at 25 C unless otherwise stated. General Specifications Measured at 120Vac input, 65%100% Load Measured at 220Vac input, 65%100% Load 0.06%/ C Case temperature = 0 C ~Tc max Parameter Min. Typ. Max. Notes Efficiency at 120 Vac input: EUK075S070DV/TV Io= 450 ma Io= 700 ma EUK075S105DV/TV Io= 700 ma Io=1050 ma EUK075S175DV/TV Io=1190 ma Io=1750 ma EUK075S280DV/TV Io=1900 ma Io=2800 ma 85.5% 85.5% 85.5% 84.5% 85.0% 84.5% 83.5% 82.0% 87.5% 87.5% 87.5% 86.5% 87.0% 86.5% 85.5% 84.0% Measured at full load and steadystate temperature in 25 C ambient; (Efficiency will be about 2.0% lower if measured immediately after startup.) 3 / 12 www.inventronicsco.com Tel: 8657156565800 Fax: 8657186601139 sales@inventronicsco.com
EUK075SxxxDV/TV General Specifications Parameter Min. Typ. Max. Notes Efficiency at 220 Vac input: EUK075S070DV/TV Io= 450 ma Io= 700 ma EUK075S105DV/TV Io= 700 ma Io=1050 ma EUK075S175DV/TV Io=1190 ma Io=1750 ma EUK075S280DV/TV Io=1900 ma Io=2800 ma Efficiency at 277 Vac input: EUK075S070DV/TV Io= 450 ma Io= 700 ma EUK075S105DV/TV Io= 700 ma Io=1050 ma EUK075S175DV/TV Io=1190 ma Io=1750 ma EUK075S280DV/TV Io=1900 ma Io=2800 ma 88.5% 88.0% 88.0% 87.0% 88.0% 87.0% 86.5% 85.0% 88.5% 88.5% 88.5% 88.0% 88.0% 87.5% 86.5% 85.5% MTBF Lifetime Operating Case Temperature for Safety Tc_s Operating Case Temperature for Warranty Tc_w 90.5% 90.0% 90.0% 89.0% 90.0% 89.0% 88.5% 87.0% 90.5% 90.5% 90.5% 90.0% 90.0% 89.5% 89.0% 87.5% 556,000 Hours 84,000 Hours 40 C +90 C Measured at full load and steadystate temperature in 25 C ambient; (Efficiency will be about 2.0% lower if measured immediately after startup.) Measured at full load and steadystate temperature in 25 C ambient; (Efficiency will be about 2.0% lower if measured immediately after startup.) Measured at 220Vac input, 80%Load and 25 C ambient temperature (MILHDBK 217F) Measured at 220Vac input, 80%Load and 70 C case temperature; See lifetime vs. Tc curve for the details 40 C +75 C Case temperature for 5 years warranty Storage Temperature 40 C +85 C Humidity: 5%RH to 100%RH Dimensions Inches (L W H) Millimeters (L W H) 5.71 2.66 1.44 145 67.5 36.5 Net Weight 770 g Note: All specifications are typical at 25 C unless otherwise stated. With mounting ear 6.54 2.66 1.44 166 67.5 36.5 4 / 12 www.inventronicsco.com Tel: 8657156565800 Fax: 8657186601139 sales@inventronicsco.com
EUK075SxxxDV/TV Dimming Specifications Parameter Min. Typ. Max. Notes DV Models Absolute Maximum Voltage on the Vdim (+) Pin Source Current on Vdim (+)Pin Recommended Dimming Range for 010V 20 V 20 V 200 ua 300 ua 450 ua Vdim(+) = 0 V 0 V 10 V PWM_in High Level 10V TV Models Dimming Output Range PWM_in Low Level 0V PWM_in Frequency Range 200 Hz 2 KHz PWM_in Duty Cycle 0% 100% Dimming Level 10% 100% Hold Time 0 Hours 18 Hours Fade Time 0 Minutes 60 Minutes Dimming Step 1 6 EUK075S070DV/TV EUK075S105DV/TV EUK075S175DV/TV EUK075S280DV/TV EUK075S070DV/TV EUK075S105DV/TV EUK075S175DV/TV EUK075S280DV/TV 10%Ioset Ioset 45 ma 70 ma 119 ma 190 ma Ioset Default is Traditional Timer. Dimming mode set to SelfAdapting Midnight or Self AdaptingPercentage in PC interface. 450 ma Ioset 700 ma 700 ma Ioset 1050 ma 1190 ma Ioset 1750 ma 1900 ma Ioset 2800 ma 45 ma Ioset < 450 ma 70 ma Ioset < 700 ma 119 ma Ioset < 1190 ma 190 ma Ioset < 1900 ma Safety &EMC Compliance Safety Category Standard CE EN 613471, EN61347213 CCC GB 19510.1, GB 19510.14 KS KS C 7655 EMI Standards EN 55015/GB 17743 (1) EN 6100032/GB 17625.1 EN 6100033 EMS Standards EN 6100042 EN 6100043 Notes Conducted emission Test &Radiated emission Test Harmonic current emissions Voltage fluctuations & flicker Notes Electrostatic Discharge (ESD): 8 kv air discharge, 4 kv contact discharge RadioFrequency Electromagnetic Field Susceptibility TestRS EN 6100044 Electrical Fast Transient / BurstEFT 5 / 12 www.inventronicsco.com Tel: 8657156565800 Fax: 8657186601139 sales@inventronicsco.com
EUK075SxxxDV/TV Safety &EMC Compliance (continued) EMS Standards Notes EN 6100045 Surge Immunity Test: AC Power Line: line to line 6 kv, line to earth 10 kv (2) EN 6100046 EN 6100048 EN 61000411 EMS Standards Conducted Radio Frequency Disturbances TestCS Power Frequency Magnetic Field Test Voltage Dips Notes EN 61547 Electromagnetic Immunity Requirements Applies To Lighting Equipment Note: (1) This LED driver meets the EMI specifications above, but EMI performance of a luminaire that contains it depends also on the other devices connected to the driver and on the fixture itself. (2) To perform electric strength (hipot) testing, the GDT ground disconnect (nut and metal lock sheet) on the driver endcap should be removed temporarily to prevent the internal gas discharge tube from conducting (as allowed by IEC 605981 Clause 10.2). After testing is completed, these items must be reinstalled to restore linetoearth surge protection and secure the end cap. Derating 6 / 12 www.inventronicsco.com Tel: 8657156565800 Fax: 8657186601139 sales@inventronicsco.com
EUK075SxxxDV/TV Lifetime vs. Case Temperature Inrush Current Waveform Efficiency vs. Load EUK075S070DV/TV(Io=450mA) EUK075S070DV/TV (Io=700mA) 7 / 12 www.inventronicsco.com Tel: 8657156565800 Fax: 8657186601139 sales@inventronicsco.com
EUK075SxxxDV/TV EUK075S105DV/TV (Io=700mA) EUK075S105DV/TV (Io=1050mA) EUK075S175DV/TV (Io=1190mA) EUK075S175DV/TV (Io=1750mA) EUK075S280DV/TV (Io=1900mA) EUK075S280DV/TV (Io=2800mA) 8 / 12 www.inventronicsco.com Tel: 8657156565800 Fax: 8657186601139 sales@inventronicsco.com
EUK075SxxxDV/TV Power Factor Total Harmonic Distortion Protection Functions Parameter Over Temperature Protection Short Circuit Protection Over Voltage Protection Notes Decreases output current, returning to normal after over temperature is removed. Auto Recovery. No damage will occur when any output is short circuited. The output shall return to normal when the fault condition is removed. Limits output voltage at no load and in case the normal voltage limit fails. Dimming 010V Dimming (Only DV models) The recommended implementation of the dimming control is provided below. 9 / 12 www.inventronicsco.com Tel: 8657156565800 Fax: 8657186601139 sales@inventronicsco.com
EUK075SxxxDV/TV Implementation 1 Notes: 1. The dimmer can also be replaced by an active 010V voltage source signal or passive components like resistors and zener. 2. If 010V dimming is not used, Dim + should be open. 10V PWM Dimming (Only DV models) Implementation 2 Notes: 1. If PWM dimming is not used, Dim + should be open. Time Dimming (Only TV models) Time dimming control includes 3 kinds of modes, they are Self AdaptingMidnight, Self Adapting Percentage and Traditional Timer. Self AdaptingMidnight: Automatically adjusts the dimming curve based on the ontime of past two days (if difference <15 minutes), assuming that the center point of the dimming curve is midnight local time. Self AdaptingPercentage: Automatically adjusts the ontime of each step by a constant percentage = (actual ontime for the past 2 days if difference <15 min) / (programmed ontime from the dimming curve). Traditional Timer: Follows the programmed timing curve after power on with no changes. Output Lumen Compensation (Only TV models) Output Lumen Compensation (OLC) may be used to maintain constant light output over the life of the LEDs by driving them at a reduced current when new, then gradually increasing the drive current over time to counteract LED lumen degradation. 10 / 12 www.inventronicsco.com Tel: 8657156565800 Fax: 8657186601139 sales@inventronicsco.com
EUK075SxxxDV/TV Programming Connection Diagram Note: The driver does not need to be powered on during the programming process. Please refer to PRGMUL2 (Programmer) datasheet for details. Mechanical Outline INPUT (VDE H05RNF 3C*1.0mm 2 7.2) DIMMING WIRES (VDE H05RNF 3C*0.5mm 2 6.3) AC/L (BROWN) AC/N (BLUE) GND (YELLOW/GREEN) Tc GRAY PURPLE BLACK/WHITE V+ (BROWN) V (BLUE) OUTPUT (VDE H05RNF 2C*1.0mm 2 6.8) PROJ: Unspecified tolerance:±1 RoHS Compliance Our products comply with the European Directive 2011/65/EC, calling for the elimination of lead and other hazardous substances from electronic products. 11 / 12 www.inventronicsco.com Tel: 8657156565800 Fax: 8657186601139 sales@inventronicsco.com
EUK075SxxxDV/TV Revision History Change Date Rev. Description of Change Item From To 20170925 A DatasheetsRelease / / 12 / 12 www.inventronicsco.com Tel: 8657156565800 Fax: 8657186601139 sales@inventronicsco.com