LEVEL TECHNOLOGIES TO POWER THE FUTURE Increase generation efficiency and keep your plant safe
INCREASE GENERATION EFFICIENCY AND GET THE MOST OUT OF YOUR PROCESS When you need to reduce variation in level control and maximize thermal cycle efficiency, the industry leading performance of Rosemount guided wave radars, DP level transmitters and vibrating fork switches help reduce risk and provide reliable, maintenance free level control. Reliability and performance that reduce risk and maintenance + Safety system suitable according to IEC 61508 Radar level transmitters + Microwave innovations for superior capability to handle challenging applications + Heavy-duty probes meet extreme temperature and pressure challenges by providing multiple layers of protection Vibrating fork and float level switches + High temperature capability for reliable alarm and plant protection duties + Adjustable switching delay to prevent false switching in turbulent conditions DP Level transmitters + Tuned-System TM assemblies optimize results + Seamless integration of remote seals, flanges, and manifolds Saturated steam applications: The radar solution + Greater accuracy achieved under changing process conditions + Unique probe design and signal processing to dynamically compensate for changes in the vapor space dielectric + Complements traditional DP solutions The superior performance 5300 guided wave radar handles even the most challenging applications Signal curve before Dynamic Vapor Compensation Signal curve after Dynamic Vapor Compensation
Reduce maintenance and operation costs Keeping your plant operation and maintenance costs to a minimum is easy with Rosemount level instrumentation based on non-moving part technology with advanced diagnostics. From reactive to predictive maintenance with advanced diagnostics Rosemount 2100 vibrating forks, 3051S DP transmitters, 5300 guided wave radar and 5400 non-contacting radar all have advanced diagnostics + Helps predict abnormal process conditions + Automatically monitors device health while in operation + Can be used to schedule maintenance + Reduces the risk of overfills and shutdowns Easy replacement of mechanical devices Guided wave radar advantages + May be installed in existing chambers + Immune to density changes + No moving parts and no re-calibration From this Differential pressure advantages + Remove chamber to access process directly + No moving parts + Cost effective solution compared to mechanical devices to this... or this... in minutes Vibrating switch advantages + Smart on-board diagnostics monitor instrument health + No moving parts and no recalibration needed + Virtually unaffected by turbulence, foam, coating or liquid properties + Operation in temperatures up to 500 F (260 C)
Cut time and costs with quick installation Make savings on design, engineering and procurement with investment in state of the art technologies Faster project turnaround When reducing costs and shortening project schedules are critical, Rosemount level instruments help you leverage best engineering, installation and commissioning practices. + Easy to install in new and existing systems + User-friendly guided setup software aids configuration + Simplified commissioning with measure and learn functionality, online help and pre-configured tank shapes Avoid problems at start-up with instruments engineered to fit together perfectly With Emerson, the solution is available from one source. You don t have to worry about everything fitting and operating together; you can obtain a guided wave radar and a bypass chamber that are designed to work optimally together to provide project start-up with peace of mind. + Correct probe and chamber lengths ensured with transmitter and chamber supplied from one source + Prefit in factory to assure no mismatches on site + Installation is easy + Controlled design and manufacture + Global quality and consistency Worry-free start-up with guided wave radar and bypass chamber from one source
Increase safety with redundant measurements Safety, health and environment at your plant are top priorities. Rosemount level instrumentation can help prevent unsafe process conditions and avoid accidents. The proactive deployment of process alerts, certified devices and best installation practices adds another layer of safety and protection. + Triple redundancy on boilers and feedwater systems is becoming an industry standard + Combinations of differential pressure and guided wave radar can meet this requirement - 2 GWR + 1 DP or - 2 DP + 1 GWR or - 3 of the same technology + Hydrastep for local and remote indication of steam/ water interface level + Hydratect for turbine water induction protection (TWIP) Designed according to industry standards + ASME B31.1 is available + Guided wave radars are compliant with boiler standards EN 12952-9 and EN 12953-11 + Vibrating fork switches, DP and radar products are safety system compliant devices according to IEC 61508 A Hydrastep electronic gauging system can be added for local and remote indication
For more information on industry leading level instrumentation visit us at www.rosemount.com/level. Non-contacting radar Guided wave radar Vibrating forks Float switches Ultrasonic DP Level The Emerson logo is a trademark and service mark of Emerson Electric Co. Rosemount and the Rosemount logotype are registered trademarks of Rosemount Inc. PlantWeb is a registered trademark of the group of companies. All other marks are the property of their respective owners. 2013 Rosemount Inc. All rights reserved. Rosemount Inc. 8200 Market Boulevard Chanhassen, MN 55317 USA T (U.S.) 1 800 999 9307 T (International) +1 952 906 8888 F +1 952 949 7001 www.rosemount.com 00803-0100-6148 Rev AB 08/13 Blegistrasse 23 P.O. Box 1046 CH 6341 Baar Switzerland T +41 (0) 41 768 6111 F +41 (0) 41 768 6300 Asia Pacific Pte Ltd 1 Pandan Crescent Singapore 128461 T +65 6777 8211 F +65 6777 0947 Latin America 1300 Concord Terrace, Suite 400 Sunrise Florida 33323 USA T +1 954 846 5030 Emerson FZE P.O. Box 17033 Jebel Ali Free Zone Dubai, UAE T +971 4 883 5235 F +971 4 883 5312