LFV series Refer to our website for product details. CCS LFV Use a search engine. Search You can also use your smartphone or cell phone. Provides diffused light evenly from LFV-RD LFV-SW LFV-BL -TP 2 H LFV 2 --FN -M-RGB-W -FN -FN Lenses Spot, Etc. Applications status Change the transmittance rate from (high) to (low) Change the installation position to the LED side Replace the diffusion plate to change the transmittance rate. Change the position to achieve various imaging effects. LFV-CP series LFV-CP-1RD Replacing the half-mirror with a beam splitter increased accuracy. It is perfect for tiny workpieces and environments with limited installation space. LFV-CP-18SW Result Increased uniformity Emphasized directionality Transmittance rate (Low) LFV-4BL Transmittance rate (High) Move to LED side Default position LED side LED side LFV-CP-1SW Please contact your CCS sales representative. E.g.: Different shape Format Created a Light Unit that changed the illuminating port from vertical to horizontal Camera window External/internal diameter Increase output Wavelength/ color Cable length Illuminating port LFV-SW LFV-5RD LFV-SW LFV-XBL Highly-accurate optical glass is used for the camera window and the half-mirror. This allows for stable imaging when using high-resolution cameras. LFV-RD Inspection for fault, damage, scratches, or dents on glossy surfaces or mirrors, pattern inspection on printed circuit boards, dimension measuring for glass, and inspection for damage and dents on resin molded products, etc. Illuminating angle Connector format Format/ material Installation/ mounting Etc. Uses optical glass For the camera window and half-mirror, we used optical glass which is also used for interference tests for laser sources. * Its optical glass with a profile * In our evaluation Expanded area for the camera window By making the camera window wider, we ensured a larger field of vision. Camera window Used an aluminum body Used aluminum alloy to improve heat dissipation and achieve a durable body. Half mirror Increased Light Unit installation holes We increased the number of installation holes for the Light Unit. Various installation directions are supported. * This description excludes the LFV-CP-1 series and the LFV-CP-18 series. By using the half mirror, diffused light from the LED is illuminated on the same axis as the camera axis. LFV- Can be installed to the cable surface The cable can be bent flat in relation to the installation surface. Camera Half mirror LED Heat dissipation material Workpiece 81 We have various materials. PDF DXF D CAD Instruction Guides Product Fliers Imaging Samples Data Sheets Examples of Custom Ordered Download here. http://www.ccs-grp.com/dl/
Options P.215 Examples of Custom Ordered P.22 Control Unit Selection Guide P.181 Control Unit Product Page P.185 Technical Guide P.229 Regulations, Etc. P.241 Description Workpiece Before the proposal After the proposal Result Character recognition Connector hood LED Bar Light LFV-RD Emphasizes the engraved text Workpiece image LED Bar Light LFV-RD Metal connector hood Workpiece image Circuit board engraved on the surface. LED Ring Light Description Workpiece form an image of the difference between the foundation and the through hole. Before the proposal After the proposal Result Effect from the surface unevenness is reduced and a clear image of the engraved text can be made. Visual inspection Circuit board LED Ring Light LFV-RD Improved uniformity LFV-RD It is possible to form a clear image of the difference between the foundation and the through hole. (Representative example) LFV-5RD Relative irradiance graph *2 (LWD Characteristics) *1: Irradiance on the optical axis *2: Illuminating distance from the Light Unit to the workpiece Relative irradiance (%) 9 9 LWD (mm) *1 LWD= mm * The graph included is for reference only and does not guarantee the quality of this product. Uniformity graph (Relative irradiance) 5 mm LWD= mm 5 mm Output level (%) Lenses Spot, Etc. -TP 2 H LFV 2 --FN -M-RGB-W -FN -FN You can inquire using our website. Light Unit Selection Requests for Loan Estimates a Catalog Product Other Inquire on our website here. http://www.ccs-grp.com/contact/ 82
LFV series Refer to our website for product details. CCS LFV Use a search engine. Search You can also use your smartphone or cell phone. (Representative example) LFV-SW Relative irradiance graph *2 (LWD Characteristics) *1: Irradiance on the optical axis *2: Illuminating distance from the Light Unit to the workpiece Relative irradiance (%) 9 9 1 1 1 1 LWD (mm) *1 LWD= mm * The graph included is for reference only and does not guarantee the quality of this product. Uniformity graph (Relative irradiance) mm LWD=1 mm mm Output level (%) -TP 2 H LFV 2 --FN -M-RGB-W -FN -FN Lenses Spot, Etc. LED color Power consumption Peak wavelength/ correlated color temperature LFV-4RD Red 24 V /. W 65 nm LFV-4SW White 6, K 24 V /.2 W LFV-4BL Blue 4 nm LFV-5RD Red 24 V /.1 W nm LFV-5SW White 24 V /. W 6, K LFV-5BL Blue 24 V /.1 W 4 nm LFV-RD LFV-SW White 24 V / 4.6 W 6, K Red 65 nm LFV-BL Blue 4 nm LFV-RD Red 24 V / 8.1 W nm LFV-SW White 24 V / 11 W 6, K LFV-BL Blue 24 V / 9.1 W 4 nm LFV-XRD Red 24 V / 1 W nm LFV-XSW White 24 V / W 6, K LFV-XBL Blue 24 V / 1 W 4 nm LFV-RD Red 24 V / 1 W nm LFV-SW White 24 V / 19 W 6, K LFV-BL Blue 24 V / W 4 nm LFV-RD Red 24 V / 22 W nm LFV-SW White 6, K 24 V / 2 W LFV-BL Blue 4 nm LFV-RD Red 24 V / 1 W nm LFV-SW White 24 V / W 6, K LFV-BL Blue 24 V / 8 W 4 nm LFV-RD Red 24 V / 4 W nm LFV-SW White 24 V / 64 W 6, K LFV-BL Blue 24 V / 5 W 4 nm LFV-CP-1RD Red 24 V / 2.1 W 65 nm LFV-CP-1SW White 24 V / 2. W 6, K LFV-CP-1BL Blue 24 V / 1. W 4 nm LFV-CP-18RD Red 24 V /. W 65 nm LFV-CP-18SW White 24 V / 4.1 W 6, K LFV-CP-18BL Blue 24 V /.4 W 4 nm Extension Cables P.222 Options Recommended Control Units Weight - PD CC-ST-24 g 15 g PD CC-ST-24 - g Control Unit Selection Guide P.181 PD PD * Can only use red and blue. PD PD PD PD PD CC-ST-24 CC-ST-24 * 5 g g 6 g 1, g 1, g 4, g - PD CC-ST-24 g - PD CC-ST-24 g Control Unit Page P.185 For details about determining the field of vision for the Coaxial Light, refer to "Determining the field of view of coaxial lighting" on P. 21 in the Technical Guide. 8 We have various materials. PDF DXF D CAD Instruction Guides Product Fliers Imaging Samples Data Sheets Examples of Custom Ordered Download here. http://www.ccs-grp.com/dl/
Options P.215 Examples of Custom Ordered P.22 Control Unit Selection Guide P.181 Control Unit Product Page P.185 Technical Guide P.229 Regulations, Etc. P.241 Options (Light color) Transmittance rate: High DF-LFV-5 DF-LFV- DF-LFV-X DF-LFV- DF-LFV- DF-LFV- DF-LFV- Light spectrum (Deep color) Transmittance rate: Low (End of the model name: -UF) LFV-5 LFV- LFV-X LFV- LFV- LFV- LFV- Relative radiant intensity (%) Relative radiant intensity (%) Supported model(s): LFV-5//X//// Blue 4 nm 4 5 6 Wavelength (nm) Supported model(s): LFV-4//CP-1/CP-18 Replace the default diffusion plate to change the transmittance rate. * When selecting, be aware that the default diffusion plate varies based on the emitted color. 4 DF-LFV-5-UF DF-LFV--UF DF-LFV-X-UF DF-LFV--UF DF-LFV--UF DF-LFV--UF DF-LFV--UF Blue 4 nm LFV-5 LFV- LFV-X LFV- LFV- LFV- LFV- Red nm White 6, K 5 6 Wavelength (nm) Red 65 nm White 6, K PL-LFV-5 PL-LFV- PL-LFV-X PL-LFV- PL-LFV- PL-LFV- PL-LFV- Use with a remove the light's LFV-5 LFV- LFV-X LFV- LFV- LFV- LFV- Be sure to read the "Instruction Guide" included with the product before use and observe cautionary information. The data included is for reference only and does not guarantee the quality of this product. LC-LFV-5 LC-LFV- LC-LFV-X LC-LFV- LC-LFV- LC-LFV- LC-LFV- P.2 P.21 P.218 Model LFV-5//X//// * The LFV-4//CP-1/CP-18 does not support this feature. Model LFV-/X//// * The LFV-4/5//CP-1/CP-18 does not support this feature. Regarding the default diffusion plate LFV-5//X//// Red light, white light (Light color) is default Transmittance rate: High LED properties Blue light (Deep color) is default Transmittance rate: Low (End of the model name: -UF) For the LFV-/X/ Half mirror side Half mirror side slits Slit for installing a polarization plate or light control film For the LFV-// 5 slits LED side LED side Slit for installing a polarization plate or light control film If using a sharp-cut filter, please use the R (option). For details about the sharp-cut filter, refer to P.215. Camera side Half mirror side * Conceptual image This is a plastic extremely narrow gap between them. It reduces light diffusion in a certain direction and increases parallelism. LFV-5 LFV- LFV-X LFV- LFV- LFV- LFV- LED side For details about replacing the diffusion plate or adjusting the position, refer to the "Instruction Guide" included with the product. Slits Slits Illumination side Lenses Spot, Etc. -TP 2 H LFV 2 --FN -M-RGB-W -FN -FN You can inquire using our website. Light Unit Selection Requests for Loan Estimates a Catalog Product Other Inquire on our website here. http://www.ccs-grp.com/contact/ 84
LFV series Refer to our website for product details. CCS LFV Use a search engine. Search You can also use your smartphone or cell phone. Dimensions (mm) LFV-4RD/SW/BL 4 28 48 26 15 15 4-MxP.5 tap depth 4 2x2-MxP.5 (Perforated) (Same for opposite side, for installation) LFV-5RD/SW/BL 4-MxP.5 tap depth 5 9 4 26 5 4-MxP.5 tap depth 5 8 1 8 8 -TP 2 H LFV 2 --FN -M-RGB-W -FN -FN Lenses Spot, Etc. 26 4-MxP.5 tap depth 6 LFV-RD/SW/BL 44 4-MxP.5 tap depth 6 4-MxP.5 tap depth 4 LFV-XRD/SW/BL 2 11 4 6-M4xP. tap depth 5 5 5 1 2 1 6 26.5 2x2-MxP.5 (Perforated) 5 2 6 54 15 41 (Same for opposite side, for installation) 2 49 94 2 11 6 2 6-M4xP. tap depth 5 5 5 LFV-RD/SW/BL 11 2 15 12 LFV-RD/SW/BL 8 51 84 6 8 4 4 1 5 1.5 1 4 2 94 49 1 69 2 56 11 2 42 2 15 12 85 We have various materials. PDF DXF D CAD Instruction Guides Product Fliers Imaging Samples Data Sheets Examples of Custom Ordered Download here. http://www.ccs-grp.com/dl/
Options P.215 Examples of Custom Ordered P.22 Control Unit Selection Guide P.181 Control Unit Product Page P.185 Technical Guide P.229 Regulations, Etc. P.241 LFV-RD/SW/BL LFV-RD/SW/BL 5 2 1 LFV-CP-1RD/SW/BL 1 26.5 2-MxP.5 tap depth 4 15 6 5 9 2 8 LFV-RD/SW/BL 15 9-M4xP. tap depth 5 2 9 Workpiece side 6 9 218 2 6 4 12 226 2 21 1 199 22 21 6-M4xP. tap depth 5 222 2 5-M2xP.4 tap depth 5 LFV-CP-18RD/SW/BL 15 2 1 55 55 9-M4xP. tap depth 5 9 9 2 4-MxP.5 tap depth 6 24 15 182 12 Workpiece side 6-M4xP. tap depth 5 5-M2xP.4 tap depth 5 You can change the connectors of the Light Unit cable. Choose between M12 connectors and flying leads. Refer to P.125 for details. 18 18 18 11 41 18 2 24 21 Lenses Spot, Etc. -TP 2 H LFV 2 --FN -M-RGB-W -FN -FN You can inquire using our website. Light Unit Selection Requests for Loan Estimates a Catalog Product Other Inquire on our website here. http://www.ccs-grp.com/contact/ 86