NX-700 / 800 NEXEDGE VHF/UHF Digital & FM Analog Mobile All NX series mobiles include: Standard Microphone (KMC-35) Mounting Bracket DC Cable (KCT-23M) Blade Fuse Instruction Manual Premium Warranty: 3 Years* * All Accessories / options: 1 Year * TX Power is derated at 490-512 MHz NX-800K: 450-489 MHz (30 W) 490-512 MHz (25 W) NX-800HK: 450-489 MHz (45 W) 490-512 MHz (40 W) GENERAL FEATURES 30W / 50W (136-174 MHz) Models 30W / 45W (400-470, 450-520 MHz) Models 512 CH-GID / 128 Zones Dash & Remote Mount 14 Character Alphanumeric Aliases Backlit Dot Matrix LCD Function/Status LCD Icons Multi-Language Display Date & 12/24 Hour Time Clock Transmit/Busy/Call Alert/Warn LED On/Off Power Control 4 Up/Down Selectors 6 Front PF Keys Emergency/AUX Key 4W Speaker Audio DB-25 Accessory Connector 9 Programmable AUX I/Os 2 Programmable AUX Outputs KPG-111D Windows FPU Flash Firmware Upgrading MIL-STD-810 C/D/E/F/G IP54/55 Water & Dust Intrusion PC Serial Interface SDM Manual Input Transparent Data Mode GPS Receiver Option VGS-1 Voice Guide Voice & GPS Data Storage Option DIGITAL GENERAL NXDN Digital Air Interface AMBE+2 VOCODER 6.25 & 12.5 khz Channels Over-the-Air Alias Over-the-Air Programming Paging Call Emergency Call All Group Call Status Messaging Remote Stun/Kill Remote Check Short & Long Data Messages GPS Location with Voice DES Encryption Module Option AES & DES Encryption Module Option AES/DES Software Key Loader Option DIGITAL CONVENTIONAL MODE 64 Radio Access Numbers (RAN) Individual & Group Selective Call Mixed FM/Digital Operation Conventional IP Networks Site Roaming DIGITAL TRUNKING MODE Individual Private Call Group Call & Broadcast Call Telephone Interconnect Transmission Trunked Mode Message Trunked Mode Call Queuing with Priority Late Entry (UID & GID) 4 Priority Monitor ID s Remote Group Add Failsoft Mode MULTI-SITE IP NETWORKS COMPATIBLE Individual Private Call Group Call & Broadcast Call Transmission Trunked Mode SCAN Single Zone / Multi-Zone / List Scan Dual Priority Scan (Conventional) ANALOG MODES - GENERAL 25 & 12.5 khz Channels Conventional & LTR Zones FleetSync /II, MDC-1200, DTMF QT / DQT & Two-Tone (Conventional Zones Only) Voice Inversion Scrambler Analog Scrambler Board Capability FleetSync / II (FM) PTT ID ANI / Caller ID Selective / Group Call Emergency, Status & Text Messages MDC-1200 PTT ID ANI / Caller ID Emergency, Radio Check & MODEL LIST EPL NX-700K 136-174 MHz 30W, 512 CH / 128 Zone 725.00 543.76 NX-700HK 136-174 MHz 50W, 512 CH / 128 Zone 850.00 637.50 NX-800K 450-520 MHz 30W, 512 CH / 128 Zone 725.00 543.76 NX-800K2 400-470 MHz 30W, 512 CH / 128 Zone 725.00 543.76 NX-800HK 450-520 MHz 45W, 512 CH / 128 Zone 850.00 637.50 NX-800HK2 400-470 MHz 45W, 512 CH / 128 Zone 850.00 637.50 Programming Cost: $50.00 Installation Cost: $50.00 Dash Mount / $75.00 Remote Mount Page 1 of 5 NX-700 800
MOBILE INSTALLATION ACCESSORIES LIST EPL KAP-2 Horn Alert/P.A. Relay Option 63.00 47.25 KCT-46 Ignition sense cable (plugs directly into mobile chassis ignition sense line) 13.70 10.28 KLF-2 Line Filter (suppresses alternator whine, 25dB, 25A max). 42.00 31.50 KMB-10 Key lock adapter 26.30 19.73 KRK-10 Remote Control Kit (a remote control cable (23 ft) is included) 105.00 78.75 KCT-23M DC Cable (35-50W Dash mount; pos/neg. 10 ft. leads) 31.50 23.63 KCT-23M3 DC Cable (35-50W Remote mount; pos.23 ft.; neg. 3.3. ft. leads) 34.75 26.06 CONTROL STATION INSTALLATION ACCESSORIES LIST EPL KMC-9C Control Station Desktop Microphone (8-pin mod. plug) 86.00 64.50 KMB-24 Control Station Mounting Case for KPS-15 Power Supplies 42.00 31.50 (mobile mounting hardware included) KPS-15 DC Switching Power Supply (117/230 VAC; 23A max. continuous, 25A peak) 173.00 129.75 MICROPHONES AND SPEAKERS LIST EPL KMC-35 MIL-SPEC Standard electret mobile microphone (8-pin mod. plug) - same as 52.50 39.38 supplied KMC-36 MIL-SPEC Standard electret mobile microphone with 12 keypad (8-pin mod. 94.50 70.88 plug) KMC-9C Control Station Desktop Microphone (8-pin mod. plug) 86.00 64.50 KES-3 External speaker (compact low profile; black case; 3.5 mm phono plug-in) 44.25 33.19 KES-5 External speaker, 40W max input Note: requires KAP-2 (PA/HA unit) installed 61.25 45.94 FIRMWARE OPTIONS LIST EPL KWD-P25C P25 Flash upgrade; NX-200/300/700/800 Must order L-1663 Note: KWD-P25C will be Kenwood factory installed only (units must be returned for upgrade) 792.00 594.00 SOFTWARE OPTIONS LIST EPL KPG-150AP NEXEDGE OTAP Manager Windows Software. License Includes 10 radios / 1 Serial Port* To add more radios/serial ports, you must contact Kenwood Systems Division [1-800-TRUNKING] 550.00 412.50 KPG-151AE AES/DES Encryption Software Key Loader for KWD-DE21K/KWD-AE21K 525.00 393.75 Note: KPG-151AE is a U.S. DOC/BIS Export Controlled Item (ECCN 5D002A) - Check with your Authorized Kenwood Dealer -' Page 2 of 5 NX-700 800
OPTION MODULES LIST EPL KWD-DE21K DES Encryption Module for TK-5*10/5*20 & NX-*00/*10 Portables & Mobiles 578.00 433.50 (except S Portable) [Intrinsically Safe Approved Accessory] - Order a Labor Code (L-1722) if installation is required. Note: Requires KPG-151AE software key loader or Motorola KVL3000 Plu key loader device. KWD-DE21K is a U.S. DOC/BIS Export Controlled Item (ECCN 5D002A)'- Check with your Authorized Kenwood Dealer -' KWD-AE20K AES FIPS140-2 & DES Encryption Module for TK-5*10/5*20 & NX-*00/*10 998.00 748.50 Portables & Mobiles (except K7 & S Portable) [Intrinsically Safe Approved Accessory] - Order a Labor Code (L-1720) if installation is required. KWD- AE20K requires a Motorola KVL3000 Plus key loader device. KWD-AE20K is a U.S. DOC/BIS Export Controlled Item (ECCN 5D002A) '- Check with your Authorized Kenwood Dealer -' KWD-AE21K AES & DES Encryption Module for TK-5*10/5*20 & NX-*00/*10 Portables & 998.00 748.50 Mobiles (except K7 & S Portable) [Intrinsically Safe Approved Accessory] - Order a Labor Code (L-1721) if installation is required. Note: Requires KPG- 151AE software key loader or Motorola KVL3000 Plu key loader device. KWD- AE20K is a U.S. DOC/BIS Export Controlled Item (ECCN 5D002A)'- Check with your Authorized Kenwood Dealer -' VGS-1 Voice Guide and Storage Unit 87.50 65.63 FleetSync & NEXEDGE AVL & MESSAGING LIST EPL KAS-10 KGS-3 GPS15XL-W GA25MCX FleetSync & NEXEDGE AVL & Messaging Software with NEXEDGE Trunking VoIP Dispatch Note: Users can chose to operate Messaging, AVL or VoIP or all three if desired. Compatible with Windows XP, VISTA & 7 and Microsoft MapPoint 2006/2009/2010 (certain format bitmap images can be imported). Refer to KAS-10 product spec sheets and manuals for detials. FleetSync & NEXEDGE AVL & Messaging Software (Windows 2000/XP compatible), Note: AVL operation /use is not required. Compatible with Microsoft MapPoint 2004/2006 Software or certain type imported maps (purchase aftermarket separately) Refer to KGS-3 spec sheet for detailed features & requirements. Garmin Internal GPS Receiver Board for FleetSync & NEXEDGE AVL Note: Conventional & LTR operation NEXEDGE Conventional & Trunking operation Requires GA25 MCX GPS antenna Refer to 180/NX-Series & KGS-3/KAS-10 In-Depth Technical Manuals for installation, programming & KGS-3/KAS-10 software setup. Refer to www.garmin.com for GPS-15L-W technical specifications. Garmin On-dash Style Magnetic base GPS Antenna for GPS15XL-W Note: shipped loose only; Install GA25MCX antenna to GPS15XL-W before vehicle install; Refer to 180/NX-Series In-depth Technical Manuals for mobile installation. 434.00 325.50 347.00 260.25 130.25 97.69 62.00 46.50 Page 3 of 5 NX-700 800
NEXEDGE Wireless Image System LIST EPL KVT-11 KAS-11 NEXEDGE Image Encoder Unit Note: Wireless Image System Monitor Station Operation. KAS-11 is required for programming. Not include Cameras (purchase aftermarket separately). Works with NX-700/800 6.25/12.5Khz Digital mode, Radio to Radio, via Conventional Repeater, Trunking Repeater and Conventional IP Network. Refer to Wireless Image Basic Operation and Installation Guide for detailed features & requirements. NEXEDGE Image Viewer Software (Windows XP/VISTA/7 compatible), Note: Wireless Image System Base Station Operation. Works with NX-700/800 6.25/12.5Khz Digital mode, Radio to Radio, via Conventional Repeater, Trunking Repeater and Conventional IP Network. Refer to Wireless Image Basic Operation and Installation Guide for detailed features & requirements. 575.00 431.25 250.00 187.50 L-1687 NX-700/800 Flow Control Modification 60.00 45.00 SERVICE RELATED ACCESSORIES LIST EPL KPG-46UM USB Programming interface cable 158.50 118.88 KPG-111DN Windows Programming Software for NX-200/210/300/410/700/800/900 103.25 103.25 Narrowband KPG-163DNK Programming software for NX-200/300/700/800 with PassPort / NEXEDGE Options Installed (12.5/ 6.25 CH bandwidths only) > Programs NEXEDGE, PassPort, LTR & analog Conventional modes. > Not for use on standard NEXEDGE radios > KPG-111DN Must be installed in PC prior to installing KPG-63DNK 165.00 123.75 PGM-NX-PP PassPort ESN Generator device for NX-200/300/700/800 Note: PGM-NX-PP is stocked in minimum quantities. Please anticipate a minimum of 30 day lead time and check with your Authorzied Kenwood Dealer to verify availability. > The TK-x180 PassPort ESN Generator device is NOT compatible for NX-x00 ESN loads. > The PGM-NX-PP requires older KPG-36AM (portable) & KPG-46AM (mobile) radio program interface cables with serial DB9 and an aftermarket DB9F adapter (*KPG-XXUM* USB style cables are not compatible) 200.00 150.00 KPG-46AM Programming interface cable (DB9M PC / 8-pin modular mobiles) Requires aftermarket DB9F to DB25M adapter for PGM-NXPP use. *Avaliable for Passport Dealers only - limited quantities 191.00 143.25 Page 4 of 5 NX-700 800
INSTALLATION / TUNING CHARGES LIST EPL L-1085 NX-700/800 Basic TX/RX check 37.50 28.13 25.00 18.75 L-1087 Install VGS-1 Voice Guide & Storage Unit Note: VGS-1 installation precludes any ANI or encryption board installation L-1094 Install KAP-2 (Default) HR1/Internal Sp./PA 25.00 18.75 L-1098 Install Garmin GPS15XL-W in NX-Series mobile for FleetSync AVL 100.00 75.00 L-1099 Assemble NX-700/800 with KRK-10 Remote Kit 42.00 31.50 L-1663 NX-700/800 P25 Conventional Software Upgrade Must order a KWD-P25C firmware option L-1687 NX-700/800 Flow Control Modification 60.00 45.00 L-1720 Install KWD-AE20K in NX-700/800/900/901 Mobiles 75.00 56.25 L-1721 Install KWD-AE21K in NX-700/800/900/901 Mobiles 75.00 56.25 L-1722 Install KWD-DE21K in NX-700/800/900/901 Mobiles 75.00 56.25 L-1743 Install PassPort - Classic / NEXEDGE Option in NX-200/300/700/800 80.00 60.00 > Order one per radio L-1744 Install PassPort - Enhanced / NEXEDGE Option in NX- 108.35 81.26 200/300/700/800 > Order one per radio L-1745 80.00 60.00 Field Retrofit PassPort - Classic / NEXEDGE Option for NX- 200/300/700/800 (order one option per the number of ESNs required) > ESN activation file with ordered number of ESNs and firmware will be shipped on a CD ROM. Allow 15 business day ARO. > Reqires PGM-NX-PP PassPort ESN Generator device > Note: The TK-x180 PassPort ESN Generator device is NOT compatible for NX-x00 ESN loads. L-1746 108.35 81.26 Field Retrofit PassPort - Enhanced / NEXEDGE Option for NX- 200/300/700/800 (order one option per the number of ESNs required) > ESN activation file with ordered number of ESNs and firmware will be shipped on a CD ROM. Allow 15 business day ARO. > Reqires PGM-NX-PP PassPort ESN Generator device > Note: The TK-x180 PassPort ESN Generator device is NOT compatible for NX-x00 ESN loads. N/C N/C Page 5 of 5 NX-700 800